I would consider this an intermediate pattern. Most of the pieces are worked in continuous rounds and
have fairly simple construction. The exception would be in the toes and feet, where there are multiple
pieces stitched together and short rows to help with shaping the ankle. Sewing the components
together also requires a little bit of patience and an eye for symmetry. This pattern is currently
untested, except by me, so if you find any errors, please let me know. Good luck!

REXY (TOOTHY, FRIENDLY T‐REX)

US terms
sl st – slip stitch
sc – single crochet
hdc – half double crochet
MR – magic ring
inc – make 2 in same stitch
dec – decrease (sc2tog)

FOOT (Make 2)
Start foot with toes: make 3 toes for each foot

Toes – in white

Round 1: MR 6
Round 2: (sc 1, inc) x 3 [9]
Rounds 3 & 4: sc in each [9]
At the end of Round 4, sl st into next
& switch from white to main color. Sc
into same stitch as sl st. Continue into
Round 5: [9]
Round 6: [9]
Cut a long tail for first 2 toes and use
this tail to tie two toes together with
3 slip stiches. Do not cut yarn after
Round 6 of last toe…you will use this
yarn to continue with rest of foot.
Round 7: Go around all 3 toes. Make sure you have 24 stitches.
Rounds 8 – 17: [24]
Row 18 (start of short rows): sc 2, ch1, turn work.
Row 19: sc 9, ch 1, turn (15 unworked sts). These 9 sts should be centered opposite the 3 toes.
Row 20: sc 9, ch 1, turn
Row 21: sc 9, ch 1, turn
Row 22 (end of short rows; after this row, work will continue in rounds): sc 9 across top, sc 2 down side,
dec w/ skipped stitch (covers 3 stitches, with the center st being the skipped one), dec, sl st 9, dec, dec
w/ skipped stitch, sc 2 up side. This should put you back at the beginning and you will now continue
working in the round.
Round 23: sc 10, dec w/ skipped stitch, sl st 9, dec w/ skipped stitch, sc 1
Round 24: sc 8, dec, dec, sl 7, dec, dec (this last dec will be on the stitch marking the beginning of the
round. Remove marker to finish decrease.)
Round 25: dec (replace round marker), sc 7, dec, sl 5, dec [15]
Rounds 26 – 28: sc in each [15]
Firmly stuff to heel.
Rounds 29 & 30: [15]
Round 31: (sc 2, inc) x 5 [20]
Rounds 32 & 33: sc in each [20]
Round 34: (sc 3, inc) x 5 [25]
Rounds 35 & 36: sc in each [25]
Round 37: (sc 4, inc) x 5 [30]
Rounds 38 & 39: sc in each [30]
Round 40: (sc 5, inc) x 5 [35]
Round 41: sc in each [35]
Round 42: (sc 5, dec) x 5 [30]
Round 43: (sc 2, dec, sc 2) x 5 [25]
Round 44: (sc 3, dec) x 5 [20]
Round 45: (sc 1, dec, sc 1) x 5 [15]
Round 46: (sc1, dec) x 5 [10]
Round 47: dec x 5 [5]
Firmly stuff foot as you go, especially in the ankle,
packing a little extra in before binding off. Sl next st
& 3rd st together. Cut yarn, leaving a long tail for
sewing.

BODY

Round 1: MR6
Round 2: inc x 6 [12]
Round 3: (sc 1, inc) x 6 [18]
Round 4: (sc 2, inc) x 6 [24]
Round 5: (sc 3, inc) x 6 [30]
Round 6: (sc 4, inc) x 6 [36]
Round 7: (sc 5, inc) x 6 [42]
Round 8: (sc 6, inc) x 6 [48]
Round 9: (sc 7, inc) x 6 [54]
Round 10: (sc 8, inc) x 6 [60]
Rounds 11 – 15: sc in each [60]
Round 16: (sc 4, dec, sc 4) x 6 [54]
Rounds 17 – 20: sc in each [54]
Round 21: (sc 7, dec) x 6 [48]
Rounds 22 – 25: sc in each [48]
Round 26: (sc 3, dec, sc 3) x 6 [42]
Rounds 27 – 30: sc in each [42]
Round 31: (sc 5, dec) x 6 [36]
Rounds 32 – 35: sc in each [36]
Round 36: (sc 2, dec, sc 2) x 6 [30]
Round 37 ‐ 40: sc in each [30]
Rounds 41: (sc 3, dec) x 6 [24]
Rounds 42 – 45: sc in each [24]
Cut yarn, leaving a long tail for sewing.

EYES (Make 2)

Round 1 (in black): MR6
Round 2: inc x 6 [12]
At the end of Round 2, sl st into next & switch from back to white. Sc into same stitch as sl st. Continue
into Round 3.
Round 3 (in white): (sc 1, inc) x 6 [18]
Rounds 4 – 6: sc in each [18]
Round 7: (sc 1, dec) x 6 [12]
Round 8: dec x 6 [6]
Firmly stuff. Sl next st & 4th st together and cut yarn. Leave a long tail for attaching the eye to the head.

EYELIDS (Make 2)

Round 1: MR6
Round 2: inc x 6 [12]
Round 3: (sc 1, inc) x 6 [18]
Round 4: (sc 2, inc) x 6 [24]
Round 5: (sc 3, inc) x 6 [30]
Round 6: (sc 4, inc) x 6 [36]
Round 7: (sc 5, inc) x 6 [42]
Round 8: (sc 6, inc) x 6 [48]
Round 9: (sc 7, inc) x 6 [54]
You will fold the eyelid in half before
sewing it in place over the eyes.

HEAD

Round 1: MR6
Round 2: inc x 6 [12]
Round 3: (sc 1, inc) x 6 [18]
Round 4: (sc 2, inc) x 6 [24]
Round 5: (sc 3, inc) x 6 [30]
Round 6: (sc 4, inc) x 6 [36]
Round 7: (sc 5, inc) x 6 [42]
Round 8: (sc 6, inc) x 6 [48]
Rounds 9 – 17: sc in each [48]
Round 18: (sc 3, dec, sc 3) x 6 [42]
Rounds 19 – 34: sc in each [42]
Round 35: (sc 5, dec) x 6 [36]
Round 36: (sc 2, dec, sc 2) x 6 [30]
Round 37: (sc 3, dec) x 6 [24]
Round 38: (sc 1, dec, sc 1) x 6 [18]
Round 39: (sc 1, dec) x 6 [12]
Round 40: dec x 6 [6]
Firmly stuff as you go, packing a little
extra in before binding off. Sl next st &
4th st together and cut yarn. Round 1 is
the back of the head; Round 40 is the
front. I switched to a smaller size hook
for the decrease rounds to make the
holes smaller so the stuffing won’t show
through. To make his nostrils: take 2 pieces of main color yarn and loop each through a stitch on each
side of his nose, according to the photo. Pull tight and secure.

TAIL

Round 1: MR6
Round 2: (sc 2, inc) x 2 [8]
Rounds 3 – 5: sc in each [8]
Round 6: (sc 3, inc) x 2 [10]
Round 7: sc in each [10]
Round 8: (sc 2, inc, sc 2) x 2 [12]
Round 9: sc in each [12]
Round 10: (sc 3, inc) x 3 [15]
Rounds 11 – 13: sc in each [15]
Round 14: (sc 4, inc) x 3 [18]
Rounds 15 – 17: sc in each [18]
Round 18: (sc 5, inc) x 3 [21]
Rounds 19 – 21: sc in each [21]
Round 22: (sc 6, inc) x 3 [24]
Rounds 23 – 25: sc in each [24]
Round 26: (sc 7, inc) x 3 [27]
Rounds 27 – 29: sc in each [27]
Round 30: (sc 8, inc) x 3 [30]
Rounds 31 – 33: sc in each [30]
Round 34: (sc 9, inc) x 3 [33]
Rounds 35 – 37: sc in each [33]
Round 38: (sc 10, inc) x 3 [36]
Rounds 39 – 41: sc in each [36]

ARMS (Make 2)
Arm includes 3 claws for each hand
Claws – in white

Round 1: MR 4
Rounds 2 – 4: sc in each [4]
Sl st and cut yarn, leaving a tail to sew
claw onto hand

Arm / Hand

Round 1: MR6
Round 2: inc x 6 [12]
Rounds 3 – 8: sc in each [12]
Round 9: dec, sl st 4, dec, hdc 4 [10]
Round 10: sc 1, sl st 4, sc 1, hdc 4 [10]
Rounds 11 – 16: sc in each [10]
Sl st and cut yarn, leaving a tail to sew arm onto body