Hello dear Amigurumi Followers
Today we share Amigurumi Fairy Tale Characters : Neona Free Pattern for you. As you know we share new free amigurumi pattern every day. The main crochets are gazelle, amigurumi bear, pola, crochet panda, penguin, giraffe, llama, pig, bunny, clown, lamb, bee, crochet unicorn, amigurumi doll, fox, penguin, dinosaur, crochet elephant, hippo, monkey, crochet cat, crochet dog and more …
Todays daily new amigurumi free crochet pattern is Amigurumi Fairy Tale Characters : Neona.
I want to give you some informations about this amigurumi free pattern ; Fairy Tale Characters : Neona.

Amigurumi Fairy Tale Characters : Neona Free Pattern

Materials

  • Worsted weight yarn – Approximately 100 yards skin tone, 80 yards green, 70 yards purple, 70 yards light blue, scrap amount of pink. (I used Hobby Lobby I love this cotton in the colors Warm Blush, Bright Citrus, Amtheyst, Pale Denim & Rosey II.
  • Suggested hook size: 3.25mm (D).
  • 2 x 11mm safety eyes (any color), or size of your choosing.
  • Fiberfill stuffing
  • Yarn needle
  • Black & pink embroidery floss
  • Blush
  • 14g floral wire (optional)

Stitch abbreviations 

Sc: single crochet

Hdc: half double crochet

Dc: double crochet

BOB4: 4 dc bobble

Inc: increase

Dec: decrease

Slst: slip stitch

Ch: chain

(): repeat same stitches

[]: stitches in same stitch

MR: magic ring

FO: fasten off

Special Stitches Used – 4 dc bobble stitch (BOB4)

Step 1: Yarn over, insert hook into st, yarn over again & pull up loop, yarn over, draw back through 2 loops. (2 loops)

Step 2: Yarn over, insert hook into same st, yarn over again & pull up loop, yarn over, draw through 2 loops (3 loops)

Step 3: Yarn over, insert hook into same st, yarn over again & pull up loop, yarn over, draw through 2 loops (4 loops)

Step 4: Yarn over, insert hook into same st, yarn over again & pull up loop, yarn over, draw through 2 loops (5 loops) 

Step 5: Yarn over, draw yarn through all 5 loops on hook.

Size: 11” tall when made with the suggested yarn and hook size

Pattern is worked in continuous rounds unless noted otherwise.

Amigurumi Fairy Tale Characters : Neona Free Pattern

Arms

Make 2 – in skin tone

R1: Sc x 5 in MR (5)
R2: Sc inc x 5 (10)

R3: Sc x 10 (10)

R4: Sc x 5, BOB4 (see special stitches), sc x 4 (10)

R5: (Sc dec x 1, sc x 3) x 2 (8)

R6-21: Sc x 8 (8)

Insert wire if you are using it, then stuff around the wire.

FO & set aside for crocheting into the body.

Legs

Make 2 – starting in green.

R1: In MR, sc x 6 (6)

R2: Sc inc x 6 (12)
R3: (Sc x 1, sc inc) x 6 (18)

R4: Sc x 18 (18) Change to skin tone.

R5: Sc x 3, sc dec x 6, sc x 3 (12)

R6: Sc dec x 1, sc x 2, sc dec x 2, sc x 2, sc dec x 1 (8)

R7: Sc inc x 1, sc x 6, sc inc x 1 (10)
R8-15: Sc x 10 (10)
R16: Sc x 1, sc dec x 1, sc x 3, sc inc x 2, sc x 2 (11)

R17: Sc x 11 (11)
R18: Sc x 1, sc dec x 1, sc x 4, sc inc x 1, sc x 3 (11)

R19: Sc x 6, sc inc x 3, sc x 2 (14)
R20-25: Sc x 14 (14)
R26: Sc x 8 (or until you reach inside center st with the feet facing away from you). Partial round.

Insert wire if you are using it, then stuff around the wire.

FO the 1st leg but not the 2nd. Continue on to the body.

Body & Head

Continue from the 2nd leg.
Stuff the body as you go.

R1: Ch 1, sc x 14 around the 1st leg, sc x 1 in ch 1, sc x 14 around the 2nd leg, sc x 1 in the other side of the ch 1 (30)

R2-5: Sc x 30 (30

If you are wiring your doll, twist the leg wires together to create one center wire.
R6: In BLO, sc x 30 (30)

R7: (Sc dec, sc x 8) x 3 (27)

R8: Sc x 27 (27)
R9: (Sc dec, sc x 7) x 3 (24)

R10: Sc x 24 (24)
R11: (Sc dec, sc x 4) x 4 (20)
R12-13: Sc x 20 (20)
R14: (Sc x 4, sc inc) x 4 (24)
R15: Sc x 8, BOB4 x 3, sc x 2, BOB4 x 3, sc x 8 (24)
R16: Sc x 24 (24) Change to skin tone.

R17: Join arms: In BLO, sc x 5 on the body, insert hook into the 1 st on the arm and BLO of the next st on the body & sc together, repeat x 1 sc the arm to BLO the next st on the body (Make sure the thumbs are facing in the right direction!), in BLO, sc x 10, repeat sc x 2 the 2nd arm to BLO on the body, end with BLO sc x 5 (24)

R18: Working around the remaining 6 sts on each arm + the body, sc x 32 (32)

R19: (Sc x 2, sc dec) x 8 (24)
R20: (Sc x 2, sc dec) x 6 (18)

R21: Sc dec x 9 (9)

R22-23: Sc x 9 (9)

Stuff the neck firmly around the center wire OR insert neck support (optional).

R24: Sc inc x 9 (18)
R25: (Sc x 1, sc inc) x 9 (27)
R26: (Sc x 2, sc inc) x 9 (36)

R27-34: Sc x 36 (36)

R35: (Sc x 4, sc dec) x 6 (30)

Insert safety eye between rounds 31 & 32, 5-6 sts apart.
R36: (Sc x 3, sc dec) x 6 (24)
R37: (Sc x 2, sc dec) x 6 (18)

Finish stuffing the head.
R38: (Sc x 1, sc dec) x 6 (12)
R39: Sc dec x 6 (6)

FO, leaving a long tail for sewing. Whip stitch FLO & pull tight to close. Hide end.

Stitch a nose between rounds 30 & 31, and a mouth between rounds 28 & 29.

Skirt

Holding doll upside down, join green yarn to FLO of R5 of the body at the back of the doll.

R1-2: Sc x 30 (30)

R3: (Sc x 9, sc inc) x 3 (33)
R4: Sc x 33 (33)

R5: (Sc x 10, sc inc) x 3 (36)

R6: Sc x 36 (36)

R7: (Sc x 5, sc inc) x 6 (42)
R8-9: Sc x 42 (42)
R10: Slst x 42 (42)

FO & weave in ends.

Straps

Hold doll right side up again. Join green yarn to FLO of R16 of the body at the center back of the doll.
R1: Slst x 4, ch 8, sk 4 (under arm), slst x 8, ch 8, sk 4 (under arm), slst x 4, slst to 1st slst.

FO & weave in ends.

Hair cap

Make 1 – in purple.

R1: In MR, ch 1, hdc x 8, slst join to 1st hdc (8)
R2: Ch 1, hdc inc x 8, join to 1st hdc (16)
R3: Ch 1, (hdc x 1, hdc inc) x 8, join to 1st hdc (24)
R4: Ch 1, (hdc x 2, hdc inc) x 8, join to 1st hdc (32)
R5-8: Ch 1, hdc x 32, join to 1st hdc (32)
R9: Ch 1, hdc x 8, slst x 1, ch 4, slst x 1 in 2nd ch from hook, sc x 1, hdc x 1, sk 1 st on hair cap, [slst x 1, ch 1, hdc x 1], hdc x 2, dc x 1, slst in front post of R7, dc x 1, hdc x 7, slst x 1, ch 4, slst in 2ndch from hook, sc x 1, hdc x 1, sk 1 st on hair cap, [slst x 1, ch 1, hdc x 1], hdc x 6, slst join to 1st hdc (36)

FO, leaving a long tail for sewing. Sew to the head & weave in end.

Bun

Make 1 – starting in purple.

R1: In MR, ch 1, hdc x 8, slst join to 1st hdc (8)
R2: Ch 1, hdc inc x 8, join to 1st hdc (16)
R3: Ch 1, (hdc x 1, hdc inc) x 8, join to 1st hdc (24)

R4-6: Ch 1, hdc x 24, join to 1st hdc (24)
R7: Ch 1, (hdc x 1, hdc dec) x 8, join to 1st hdc (16)
FO, leaving a long tail for sewing. Stuff an sew to the head/hair cap. Weave in end.

Bow

Make 1 – in pink.

R1: In MR, (ch 3, dc x 3, ch 3, slst x 1) x 2.

FO, leaving a long tail for sewing. Wrap the yarn tail tightly around the center of the bow 3-4 times. Sew to the bun. Weave in end.

Top wing

Make 2 – in light blue.

R1: In MR, sc x 6 (6)

R2: Sc inc x 6 (12)
R3: (Sc x 1, sc inc) x 6 (18)

R4: (Sc x 2, sc inc) x 6 (24)

R5: (Sc x 3, sc inc) x 6 (30)
R6: (Sc x 4, sc inc) x 6 (36)
R7: (Sc x 5, sc inc) x 6 (42)
R8: (Sc x 6, sc inc) x 6 (48)

R9: Fold in half, working across both sides: Sc x 23, sc inc x 1, ch 1, turn (25)
R10: (Sc x 1, sk 1, [dc x 5], sk 1) x 6, sc x 1 (6 shells)

FO, leaving a long tail for sewing. Weave the end through to the other side on one of the wings, so that the right side of R10 is facing forward when sewn on to the body.

Bottom wing

Make 2 – in light blue.

R1: In MR, sc x 6 (6)

R2: Sc inc x 6 (12)
R3: (Sc x 1, sc inc) x 6 (18)

R4: (Sc x 2, sc inc) x 6 (24)

R5: (Sc x 3, sc inc) x 6 (30)
R6: (Sc x 4, sc inc) x 6 (36)

R7: Folf in half, working across both sides: Sc x 18 (18)

FO, leaving a long tail for sewing. Weave the end through to the other side on one of the wings, so that the right side of R6 is facing forward when sewn on to the body.

WING ASSEMBLY:

Sew bottom part of wing to top part of wing, with the bottom in front – see photo for assembly positioning. Once assembled sew to the back of your doll as shown.

You’re done!

More Amigurumi Fairy Character Ideas: