Bring festive cheer to your everyday essentials with the Amigurumi Santa Tissue Box Cover, a cozy crochet project that adds charm to your home decor!

Project Details

Finished Size: Fits standard rectangular tissue boxes: 23–24 cm (L) × 11–12 cm (W) × 9–10 cm (H)

Materials

• Plush/Chenille Yarn (Himalaya Dolphin Baby, Bernat Blanket, etc.)
• Red: 80–100 g (Santa suit + hat)
• White: 60–80 g (beard + hat brim + trims)
• Beige/Light Skin Tone: 25–30 g (head, nose, hands)
• Black: 25–30 g (boots, belt)
• Light Pink: 5 g (cheeks)
• Black safety eyes: 10–12 mm
• Crochet hook: 4.0–5.0 mm
• Polyester stuffing
• Yarn needle
• Scissors
• Stitch marker
• Pom-pom maker (optional but recommended)

Abbreviations

• MR – Magic Ring
• sc – single crochet
• inc – increase (2 sc in same st)
• dec – invisible decrease
• sl st – slip stitch
• ch – chain
• FLO – front loop only
• BLO – back loop only
• FO – fasten off

Tissue Box Cover (Slip-On Cube)

Top Panel (Red)

R1: Ch 22, sc in 2nd ch from hook and across (21)

R2–13: Ch 1, turn, sc across (21)

FO, leave tail.

Oval Tissue Opening (White Trim)

Using white yarn:

Attach white 4 sts right from center.

Round the opening by working 22 sl st around an oval shape.

Keep stitches tight and smooth.

This forms the soft oval shape seen in the pictures.

Side Panels (Make 4 – Red)

Ch 32

R1–10: sc 31, ch 1, turn

FO.

Assembly of Cube

Sew the four side panels to the edges of the top panel.

Sew the sides to each other to close the box shape.

Leave the bottom completely open.

Keep seams inward for smooth outer edges.

This creates a sturdy slip-on cover that hugs the tissue box perfectly.

Santa Head

Head (Beige)

R1: MR 6 (6)

R2: inc ×6 (12)

R3: (sc, inc) ×6 (18)

R4: (2 sc, inc) ×6 (24)

R5: (3 sc, inc) ×6 (30)

R6: (4 sc, inc) ×6 (36)

R7–14: sc around (36)

R15: (4 sc, dec) ×6 (30)

R16: (3 sc, dec) ×6 (24)

R17: (2 sc, dec) ×6 (18)

Stuff very firmly.

R18: (1 sc, dec) ×6 (12)

R19: dec ×6 (6)

FO.

Safety Eyes: Insert 10–12 mm eyes between Rounds 7–8, spacing 6–7 stitches apart.

Nose (Beige – Large & Round)

R1: MR 6 (6)

R2: inc ×6 (12)

R3: (sc, inc) ×6 (18)

R4–5: sc around (18)

R6: (sc, dec) ×6 (12)

FO, stuff lightly and sew centered between eyes.

Cheeks (Pink, Make 2 – Lightly Stuffed)

R1: MR 6 (6)

R2: inc ×6 (12)

FO and lightly stuff.

Sew slightly under eyes.

Puffy Beard Pieces (Make 7)

Each beard puff:

R1: MR 6 (6)

R2: (inc) ×6 (12)

R3: (sc, inc) ×6 (18)

R4: sc around (18)

FO.

Arrangement: 3 along bottom, 2 on each side of nose, 1 centered lower (optional).

Sew puffs touching each other so the beard looks rounded and fluffy.

Puffy Mustache (White, Make 2)

R1: MR 6 (6)

R2: (inc) ×6 (12)

R3–4: sc around (12)

Pinch one end slightly and sew both pieces under the nose.

Hat (Long & Droopy)

Ribbed Brim (White)

Ch 40

R1: sc across (39)

R2–6: BLO sc across

Join short ends to form a ring.

Hat Body (Red)

R1: Pick up 39 sts around brim (39)

R2–6: sc around (39)

R7: (5 sc, dec) ×6 (33)

R8–10: sc around (33)

R11: (4 sc, dec) ×6 (27)

R12–14: sc around (27)

R15: (3 sc, dec) ×6 (21)

R16–18: sc around (21)

R19: (2 sc, dec) ×6 (15)

R20–22: sc around (15)

R23: (1 sc, dec) ×6 (10)

R24–26: sc around (10)

R27: dec ×5 (5)

FO.

Add a large white pom-pom.

The hat should be long so it naturally flops just like in the photos.

Arms (Make 2)

Sleeves (Red)

R1: MR 6 (6)

R2: (sc, inc) ×3 (9)

R3–10: sc around (9)

FO.

Cuffs (White Rib)

Ch 10

R1: BLO sc across (9)

Repeat 4 rows.

Sew into a ring, attach to sleeve end.

Hands (Beige – Round)

R1: MR 6 (6)

R2: inc ×6 (12)

R3–4: sc around (12)

R5: (sc, dec) ×4 (8)

Stuff lightly, sew closed, attach to sleeves.

Position arms leaning forward as in the photo.

Legs (Red)

R1: MR 6 (6)

R2: inc ×6 (12)

R3–8: sc around (12)

FO, stuff.

Boots (Black)

R1: MR 6 (6)

R2: inc ×6 (12)

R3: (sc, inc) ×6 (18)

R4–6: sc around (18)

R7: (sc, dec) ×6 (12)

R8–9: sc around (12)

FO.

Sew legs to boots.

Attach legs behind the tissue box, angled outward.

Belt (Black)

Ch 28–30

sc 2 rows

Wrap around Santa’s belly smoothly and sew flat.

Add a small square yellow buckle (embroider or surface stitch).

Attaching Santa

Lay Santa’s body in front of the cube. Sew only the front ⅓ of the body (chest area) to the lower front panel. Sew arms to the body so hands rest on the floor like in the picture. Sew legs behind the cube, pointing backward. Sew head to upper chest; tilt slightly forward for cuteness. Place hat so it flops naturally to one side.

How to Insert the Tissue Box

This is super easy: Turn the Santa over. Slide your tissue box up through the open bottom of the crocheted cube. Pull the tissues through the oval opening. Set Santa down — ready to display!

How to Keep the Holder Steady

To achieve the crisp, firm cube shape: Crochet tight stitches. Place plastic canvas panels inside each wall (cut to size). Hot glue or stitch lightly inside so they stay in place. The top panel will stay perfectly flat. Santa will not sag or lean.

How to Keep Santa Lying Neatly

Two helpful methods:

• Method 1 — Add a Little Weight: Insert a few flat stones or glass pebbles in a small pouch and place it inside the center of the cube.
• Method 2 — Add a Stiff Back Panel: Cut a rectangle of plastic canvas and place behind Santa’s belly area.

Both help Santa stay in a relaxed, stable pose.

Final Notes

Shape beard curls gently. Adjust hat drape. Flatten boots so they rest naturally. Smooth stuffing through seams. Add blush with pink pastel if desired.

Copyright Notice

Pattern created for amigurumi.badoomobile.net

Finished Santa Amigurumi – Color Variations and Accessories

Create your very own Amigurumi Santa Candy Bowl with this fun and festive crochet pattern! This cheerful Santa is not only a decorative item but also a functional candy holder that adds a touch of whimsy to your holiday celebrations.

Project Details

• Skill Level: Intermediate
• Finished Size: Approximately 30-33 cm (12-13 inches) tall including the hat.

Materials

• Worsted weight (4) yarn in the following colors:
• Red – suit, hat, arms
• White – beard, hat brim, suit trim, bowl rim
• Beige – face
• Black – boots, belt
• Yellow – buckle
• Pink – cheeks

Abbreviations

MR – magic ring
sc – single crochet
inc – increase (2 sc in same st)
dec – invisible decrease
ch – chain
sl st – slip stitch
FO – fasten off
BLO – back loop only

Pattern

Head (Beige)

R1: MR 6
R2: inc ×6 = 12
R3: (sc, inc) ×6 = 18
R4: (2 sc, inc) ×6 = 24
R5: (3 sc, inc) ×6 = 30
R6: (4 sc, inc) ×6 = 36
R7: (5 sc, inc) ×6 = 42
R8-R15: sc 42
Insert 14 mm eyes between R11-12, about 8-9 stitches apart.
R16: (5 sc, dec) ×6 = 36
R17: (4 sc, dec) ×6 = 30
R18: (3 sc, dec) ×6 = 24
R19: (2 sc, dec) ×6 = 18
Stuff firmly.
R20: (sc, dec) ×6 = 12
R21: dec ×6 = 6
FO and close.

Nose (Beige)

R1: MR 6
R2: inc ×6 = 12
R3-R4: sc 12
R5: (sc, dec) ×4 = 8
Lightly stuff and sew in center of face.

Cheeks (Pink, make 2)

R1: MR 7
FO and sew under eyes.

Eyebrows (White, make 2)

Ch 8
Row 1: sc 7
FO and sew flat above each eye.

Hat

R1: MR 6
R2: (sc, inc) ×3 = 9
R3: (2 sc, inc) ×3 = 12
R4-5: sc 12
R6: (3 sc, inc) ×3 = 15
Continue adding straight rounds until hat is long enough to bend naturally forward. White brim: sc around twice, sl st around and FO.

Structured Candy Bowl Body

R1: MR 6
R2: inc ×6 = 12
Continue increasing and working in rounds until you reach the desired height, then complete with a white rim.

Assembly

Sew the legs, arms, and head onto the main body, ensuring stability for the bowl. Fill with treats and place your Santa in a prominent spot.

Final Notes

Enjoy your Amigurumi Santa Candy Bowl as a festive centerpiece or a thoughtful gift for someone special!

Copyright Notice

Pattern created for amigurumi.badoomobile.net

Finished Santa Amigurumi – Color Variations and Accessories

This free crochet pattern is designed to be beginner-friendly, enjoyable to crochet, and perfect for creating a classic, festive Santa Claus amigurumi with a clean and professional finish.

If you love crocheting holiday-themed amigurumi, Christmas decorations, and market-friendly crochet dolls, this adorable Santa Claus is a wonderful project to add to your collection.

Below you’ll find the full step-by-step instructions to crochet this cute amigurumi Santa Claus.

This pattern is designed to create a classic, jolly Santa Claus with a textured, curly beard. It is perfect for holiday decor or as a unique gift.

🧵 Materials & Tools

• Yarn: Cotton or Acrylic (DK/Light Worsted weight) in Red, White, Skin Color, Black, Brown, and a touch of Yellow/Gold.
• Hook: 2.25 mm or 2.5 mm.
• Eyes: 8 mm Safety Eyes.
• Stuffing: High-quality polyester fiberfill.
• Notions: Yarn needle, stitch marker, and scissors.

📝 Abbreviations (US Terms)

• MR: Magic Ring
• Sc: Single crochet
• Inc: Increase (2 sc in one stitch)
• Dec: Decrease (sc 2 together)
• BLO: Back Loops Only
• Sl st: Slip stitch
• Ch: Chain

🛠️ 🎅 Amigurumi Santa Claus Pattern Step-by-Step Instructions

1. Legs & Body (Worked as one piece)

Start with Black Yarn:

• R1: 6 sc in MR (6)
• R2: 6 inc (12)
• R3-R5: 12 sc (12)
• Switch to Red Yarn:
• R6: BLO 12 sc (12)
• R7-R10: 12 sc (12)
• Fasten off the first leg. Repeat for the second leg but do not cut the yarn. Chain 3 and join to the first leg.
• R11: 12 sc (leg 1) + 3 sc (on ch) + 12 sc (leg 2) + 3 sc (on ch) = 30 sc
• R12-R20: 30 sc (30)
• Switch to Black Yarn (Belt):
• R21: 30 sc (30)
• Switch back to Red Yarn:
• R22: (3 sc, 1 dec) * 6 (24)
• R23: (2 sc, 1 dec) * 6 (18)
• Stuff the body firmly.

2. Head (Skin Color)

• R24: BLO 18 sc (18)
• R25: (2 sc, 1 inc) * 6 (24)
• R26: (3 sc, 1 inc) * 6 (30)
• R27-R33: 30 sc (30) — Place safety eyes between R30 and R31, 5 sts apart.
• R34: (3 sc, 1 dec) * 6 (24)
• R35: (2 sc, 1 dec) * 6 (18)
• R36: (1 sc, 1 dec) * 6 (12)
• R37: 6 dec (6) — Close the hole.

3. The Curly Beard (White Yarn)

To achieve the textured look in your photo:

• Attach white yarn to the face where the beard should start (around R25-R26).
• Technique: Insert hook, pull up a loop, Ch 10, sl st back into the same stitch.
• Repeat this loop for every stitch from ear to ear, moving downwards in 2 or 3 rows to create a thick, layered effect.

4. Santa’s Hat (Red & White)

Start with Red:

• R1: 6 sc in MR (6)
• R2-R4: 6 sc (6)
• R5: (1 sc, 1 inc) * 3 (9)
• R6-R10: 9 sc (9)
• Continue increasing by 3 stitches every few rows until it fits the head.
• Edge: Switch to white yarn (textured/fluffy yarn works best) and work 2 rows of sc.
• Attach a large white pom-pom to the tip.

5. Arms & Accessories

• Arms: Start with Skin Color (6 sc in MR), switch to Red and work 10 rows of 6 sc.
• Nose: Skin Color, 6 sc in MR, 1 row of 6 sc. Sew between the eyes.
• Toy Sack: Brown yarn. Work a circle (6, 12, 18, 24 sc), then 8 rows of 24 sc. Stuff lightly and tie with a red ribbon.

🎨 Finished Amigurumi Santa Claus – Color Variations