Materials:
• cotton yarn or cotton / acrylic (Alize Cotton Gold, YarnArt Jeans, Vita Lira, etc.);
• eyes for toys (safe – with fixing from the inside of the part);
• Synthesis or other suitable material for packing;
• a wooden ring with a diameter of 55 mm;
• a rattle (a container with beads or special accessories).

Instruments:
• hook number 2;
• scissors;
• tweezers or packing clamps;
• Needle.

Legend:
• Вп – air loop
• ss – connecting bar
• sbn – column without crochet
• ub. – decrease
• arr. – an increase

Amigurumi Rattle Giraffe Free Pattern

Tie the ring:
Type on the thread about 13 in. Try on the ring. The harness should not be too tight to be able to turn the ring under it, but it should not hang too. We close the chain in a ring around the wooden base and begin to knit spirally bunches without a crochet until we tie the whole base. As you knit, rotate the knitting around the base. When you come to the end, align the entire canvas and sew the ends of the strap. Thread the knot and put it in the linen.

Muffle:
Again, dial on the thread vn, this time around 16 (try on the knotted ring). Close in the ring and make a lift loop. You need to knit this part with cc and bn in each row. We knit this way 18 rows. At the end of the last row, change the thread color
on the other, we fill the tails into posts. We knit the last ss, stretch the thread and restore the edge of the part (cut the thread to a sufficient length), then fill it with the wrong side. We attach the thread of the same color to the other side of the muff, and we also tie it and decorate it. The total should be 20 rows. We unfold the muff with the seam down, on the inner side of the ring.

Handles: 2 parts in a spiral without insertion and ss
1) 2 in, 6 sb in the first loop (6) or the ring amigurumi
2) aprox6 (12)
3) (1, app) x6 (18)
4) 1, arr., (2, arr.) Х5, 1 (24)
5-6) 2 rows (24)
7) (2, уб.) Х6 (18)
8-9) 2 rows (18)
10) (1, уб.) Х6 (12)
Fold in half and connect the halves with 3 sbn, knot, cut the long thread for sewing. Handles we sew to the seventh row of a muff from each side, we tie a string with a knot and hide it.

Head: spirally absent and ss
1) 2 in, 6 sb in the first loop (6) or the ring amigurumi
2) aprox6 (12)
3) (1, app) x6 (18)
4) 1, arr., (2, arr.) Х5, 1 (24)
5) (3, app) x6 (30)
6) 2, arr., (4, arr.) Х5, 2 (36)
7) (5, app) x6 (42)
8) 3, prib., (6, arr.) X6 (48)
9) (7, ap) x6 (54)
10) 4, arr., (8, arr.) Х5, 4 (60)
11-18) 8 rows (60), the eyes are inserted after 14 rows at a distance of 14 sb from each other
19) 4, уб., (8, уб.) Х5, 4 (54)
20) (7, уб.) Х6 (48)
21) 3, уб., (6, уб.) Х5, 3 (42)
22) (5, уб.) Х6 (36)
23) 2, уб., (4, уб.) Х5, 2 (30)
24) (3, уб.) Х6 (24), here you can put a rattle in the head
25) 1, уб., (2, уб.) Х5, 1 (18)
26) (1, уб.) Х6 (12), сс, cut and thread the long thread for sewing, restore the edge.

Ears: spirally
1) 2 in, 6 sb in the first loop (6) or in the ring amigurumi
2) 1 row (6)
3) aprox6 (12)
4) (1, app) x6 (18)
5) 1, arr., (2, arr.) Х5, 1 (24)
6-7) 2 rows (24)
8) 1, уб., (2, уб.) Х5, 1 (18)
9) 1 row (18)
10) Уб.х12 (12), сс, cut the long thread for sewing and fill it.

Horns: spirally
1) 2 in, 6 sb in the first loop (6) or in the ring amigurumi
2) aprox6 (12)
3) 1 row (12)
4) уб.х6 (6)
5-6) 2 rows (6), ss, cut the long thread for sewing and fill it.

Muzzle: spiral
1) 4 in, beginning with the second from the hook loop: 2 sb, 3 sbn in the extreme loop, on the other side 1 sb, 2 sb in the extreme loop (8)
2) prib., 2 sbn, pr.x3, 2 sb, prix.x2 (14)
3) 1 сбн, приб., 2 сбн, приб., 1 сбн, приб., 1 сбн, приб., 2 сбн, приб., 1 сбн, приб. (20), 2 ss, cut the long thread for sewing and fill it.

Bow:
8 in, then we knit with turning ten rows. In the end, we make 1 in, and we tie a rectangle around the perimeter (in the corners of 3 sb). We transfer the yarns to the middle of the wide part, pull out a very long thread (about a meter), restore the edge. Then add a rectangle and fix the folds with a needle, then wrap the butterfly in the middle. We fasten the thread with several stitches, pull out the loop and knit about 14 inches (try on the neck of the toy). We tighten the thread with a knot, wrap a chain around the neck of the toy and sew it to the bow on the other side.

More Amigurumi Rattle Ideas:

Necessary materials: 
Main yarn-jeans from Yang art, white, brown, blue and flesh colors
On the hair-yarn childish caprice, but you can also jeans
Wire for a skeleton: PUNP 2 2.5, it is possible any other, it is necessary two lengths of length 35-40 SM
Wire residues for beads thickness 1.5 for pens 20 cm (I skruchivala it twice)
A little cardboard for insoles in shoes, two scissors for the eyes and of course, all sorts of Ukrashalochki (girl, all the same)
Hook 1.5

Legend: 
Ka – Amigurumi ring
PRS-Column without a throw
P – Raise, U-decrease
VP-Air Loop, SS-Connecting column
STDs-Rear Polupetlja
The total number of loops or series is indicated in parentheses

Amigurumi Doll Cute Free Pattern

Hands (2 parts)
(Beading wire Cross-section 1.5-two segments of 15 cm)
Flesh-colored thread:
1 row: 6 in Ka (6)
2 row: (1SBN, P, 1SBN) * 2 (8)
3-5 Series: 8 (3 rows)
Go to the white thread:
6 Row: 8 (8)
Then the increments go on the sides:
7 row: Knit for STDs: 1SBN, P, 3SBN, p, 2SBN (10) 
If crochet schoolgirl, then continue to knit white, if crochet pervoklashku-go to Brown
8 row: 2SBN, P, 4SBN, p, 2SBN (12)
9-21 Series: 12 (13 Rows for schoolgirl, 11 for graders)
Insert Wire, beat. Do not fit tightly, just to keep the shape.
22 Row: U * 6 (6) 
Thread cut off
Move to the front Polupetljam 7 rows. Obvjazyvaem White Thread: (3VP, SS) in each loop.

Leg (2 parts)
Color shoes:
7 EAP
1 row: 5SBN, 5SBN in 1, 4SBN, P (16)
2 row: P, 4SBN, p * 5, 4SBN, p * 2 (24)
3 row: P * 2, 4SBN, (P, 1SBN) * 5, 5SBN, p, 1SBN, p (33)
4 row: 1SBN, P, 4SBN, (P, 2SBN) * 5, 4SBN, p, 3SBN, p, 1SBN, p (41)
5 row: 41 per STDs
6 – 8 row: 41 PRS (3 rows)
Insert a cardboard insole. 
9 row: (5SBN, y) * 5, 6SBN (36)
10 row: (4SBN, y) * 6 (30)
11 row: 5SBN, (y, 2SBN) * 5, 3SBN, Y (24)
12 row: 3sbn, (y, 1SBN) * 3, (1SBN, y) * 3, 3SBN (18)
Take a cut wire 35-40 cm, bend the loop at the bottom and insert into the leg. Fills.
Go to the color socks (white):
13 row: 5SBN, U * 3, 7SBN (15)
14 row: 3SBN, U * 4, 2SBN, U (10)
15 – 19 Row: 10 (5 rows)
Changing the thread to bodily:
20 row: 10 per STDs
21 – 30 Row: 10 (10 rows)
The legs are not whipped!
The second leg does not presious the thread. Marker in the middle of the back of the leg.
We go to the 20 row and for the front polupetlju knitting rjushechku white thread: 3VP, SS in each loop.

Torso + skirt
Pervoklashka a little lower, so knit it into several rows shorter. But you can tie her up like a schoolgirl. Beat as you knit!
If to knit without panties, then a thread of a flesh colour knit: 3SBN, 10 EAP, attach the second leg. If with panties, then: 2SBN a thread of a flesh colour, attach a white thread (1SBN), then Knit 10 EAP, attach the second leg. Check the position of the legs.

1 row: 10 on the first leg, 10 on the EAP, 10 on the second leg, 10 on the other side (40)
2 row: 5SBN, p, 4SBN, 10 PRSPs, 4SBN, p, 5SBN, 10 PRSPs (42) 
The increments are on the sides, PRSPs the front and back between the legs, where the knitted of the EAP
Displace start of the series on the side (6SBN)
If Crochet without panties: 
3 – 7 row: 42 PRS (5 rows) Body color thread
If Crochet with panties:
3 – 5 row: 42 PRS (3 rows) White thread
6 row: 42 PRS behind STDs body color thread 
7 row: 42 PRS (for graders this range is not knitting)
8 row: 24SBN, (y, 1SBN) * 6 (36) Decreases go back, form the butt
9 row: 17SBN, U * 3, 7SBN, U * 3 (30) decreases on the sides

For graders:
Go to the brown thread:
10 row: 30 PRS (30)
Move the marker to the middle of the back, make the mixing loops
11th row: 30SBN for STDs
12-14 Range: 30SBN (3 rows)
15 row: (3SBN, y) * 6 (24)
16 – 17 Row: 24SBN (2 rows)
18 row: Three decreases on each side: 3SBN, U * 3, 6SBN, U * 3, 3SBN (18)
Vvjazyvaem Hands:
The tails of procrastination from the handles I somersault and fix in the body.
19 row: 3SBN, 3sbn on a hand and a body, 6SBN, 3sbn on a hand and a body, 3SBN (18)
20 row: 3SBN, 3SBN on the remaining loops of a hand, 6SBN, 3sbn on loops of a hand, 3SBN (18)
21 row: Three decreases on each side: 2SBN, U * 3, 3SBN, U * 3, 1SBN (12)
Turn on the thread of flesh color, knit neck:
22 row: (Y, 1SBN) * 4 (8) per STDs23-25 Series: 8SBN 
The thread is not presious
We go to the front Polupetljam 22 rows, knitting white thread 3VP, SS in each loop.

For schoolgirl: 
Go to the white thread:
10 row: 30 PRS (30)
Move the marker to the middle of the back, make the mixing loops
11th row: 30SBN for STDs
12-15 Series: 30SBN (4 rows)
16 row: (3SBN, y) * 6 (24)
17 – 18 Row: 24SBN (2 rows)
19 row: Three decreases on each side: 3SBN, U * 3, 6SBN, U * 3, 3SBN (18)
Vvjazyvaem Hands:
20 row: 3SBN, 3SBN on hand and body, 6SBN, 3SBN on hand and body, 3SBN (18)
21 row: 3SBN, 3SBN on the remaining loops of a hand, 6SBN, 3sbn on loops of a hand, 3SBN (18)
22 row: Three decreases on each side: 2SBN, U * 3, 3SBN, U * 3, 1SBN (12)
Turn on the thread of flesh color, knit neck:
23 Row: (Y, 1SBN) * 4 (8) per STDs
24-26 Range: 8SBN (3 rows)

Skirt:
Turn the doll head to her.

For schoolgirl:
The filament of blue color attach to the front Polupetljam 11 rows and knit (1SBN, N) to the end of the series, I got 45 loops. Then knit in a circle without additions as many rows, what length you want to be skirt. Finish Rjushechkoj: 3 PRSPs in each loop.

For graders:
The thread of brown color attaches to the front Polupetljam 11 rows and knit (1SSN, increase PRSs) * to the end of the series. Then 2 rows knit in a circle PRSs, the next row (2SSN, increase PRSs), again two rows of knitting in the circle of PRSs, the next row-with raises through 3 PRSs. I hope the principle is clear. The length of skirts do to your liking, the main thing is that the panties were covered. Finish Knitting Rjushechkoj: (8 PRSs in 1, 1 loop Skip, SS, 1 loop Skip, Next again 8 PRSs) and so to the end of the series. 

Head
Continue knitting:
26 Row: P * 8 (16)
27 Row: (P, 1SBN) * 8 (24)
28 row: (P, 2SBN) * 8 (32)
29 Row: (P, 3SBN) * 8 (40)
30 row: (P, 4SBN) * 8 (48)
31 row: (P, 7SBN) * 6 (54)
32 Series: (P, 8SBN) * 6 (60)
33 – 37 Series: 60
Wire twist. Try to twisting the height of not less than half of the head, otherwise the head will eventually hang out.
Next knit nose (check its location, you need it to be centered in front)
38 Series: 30SBN, 5 PRSs in 1 (lumpy), 29SBN (60)
39 Series: 19SBN, U, 1SBN, u, 1SBN, y, 3SBN (where the nose), y, 1SBN, u, 1SBN, U, 19SBN (54) (three decreases in front to the right and left of the nose)
40 – 41 Series: 54 (2 rows)
42 Series: (7, y) * 6 (48)
43 Series: (6, y) * 6 (42)
We beat our head. Tight enough, but so that you could do utjazhki.
44 Series: (5, y) * 6 (36)
45 Series: (4, y) * 6 (30)
46 Series: (3, y) * 6 (24)
47 Series: (2, y) * 6 (18)
48 Series: (1, y) * 6 (12)
Cut the thread. I leave a small hole so that in case of what, head could be podnabit. This hole will then close with a wig.
Decorate the face: a little utjagivaem eye. And then everything on your taste and flight fantasies.

Wig
Necessarily jeans on a head, the cap should not hang loosely, and should be tightened. Adjust the number of rows and loops in the series under your head.
1 row: 6SBN
2 row: P * 6 (12)
3 row: (1SBN, p) * 6 (18)
4 row: (2SBN, p) * 6 (24)
5 row: (3SBN, p) * 6 (30)
6 row: (4SBN, p) * 6 (36)
7 row: (5SBN, p) * 6 (42)
8 row: (6SBN, p) * 6 (48)
9 row: (7SBN, p) * 6 (54)
10-15 Series: 54 (6 rows)
Then knit: SS, PRs, PRSPs, 3 PRSs in 1 Loop, PRSPs, PRs to the end of the row, ending with a connecting column
Sew Wig.
Next knit hairstyle. It can be any. I only explain the principle of knitting.

Ponytails-Spirals
Small: (20 VP, then each on 3 PRSs) * 8
Large: (50 VP, 3 PRSs each) * 3
Lateral: (15 VP, 3SBN each) * 2
To make the white bow on the schoolgirl looked good, I tied the ball (you can tie the bead):
1 row: 6SBN
2 row: P * 6 (12)
3 row: (1SBN, p) * 6 (18)
4 – 5 row: 18
6 row: (1SBN, y) * 6 (12)
This bead I came to Parichku. And then he had the spirals.

Girl’s bow:
Knitting a chain of 6 EAP (+ 1 loop lifting), and then straight-turning rows knit strip (I got 20 rows). Further obvjazyvaem on the edge of Rjushechkoj: 4 PRSs in 1, 1 skip, in the next-SS, again one skip, in the next 4 PRSs, etc.
Sew the ends, forming a bow. Sew a bow to the head.

More Amigurumi Doll Ideas:

Amigurumi Rattles Kitten Free Pattern

Handles – only three first rows are knitted in white, then color changes to the main one.

Muzzle: 2 parts
1) 2 in, 6 sb in the first loop (6)
2) prib.kh6 (12), ss, cut the thread, leaving a long tail for sewing, restore the edge.
Both details of the muzzle are sewn close to each other, with
This in the middle (that is, under the place of embroidery of the nose) should be protruding parts of parts (where there was a restoration of the edge).

Ears: 2 parts
1) 2 in, 6 sb in the first loop (6)
2) 1 row (6)
3) aprox6 (12)
4) 1 row (12)
5) (1, app) x6 (18)
6) 1 row (18)
7) 1, arr., (2, arr.) Х5, 1 (24)
8) 1 row (24)
9) (3, arr.) X6 (30)
10) 1 row (30), ss, cut the thread, leaving a long tail for sewing, restore the edge.
The ears are sewn as follows: the bottom edge must be 7 cms from the eyes (right or left – according to
sewn ear), upper – in 8 rows from the top, visual the location on the side is at the hand level.

Amigurumi Unicorn Rattle Free Pattern

Stage 1. A pen
We begin to knit a thread of lime color. 1 row – 6 sb in the ka.
2 rows – 6 pr (12)
3 row – (1 sb, pr) * 6 (18)
4 row – (2 sb, pr) * 6 (24)
5 row – (3 sb, pr) * 6 (30)
6 – 10 row – 30 сбн
11 row – (3 sb, ub) * 6 (24)
12th row – 24th c.
13 row – (2 sb, ub) * 6 (18)
Filling. Change the color of the thread to the milk. 14-17 series – 18 sbn
Change the color of the thread to lime. 18th row – 18th c.
Change the color of the thread to lilac. 19-20 series – 18 sbn
Change the color of the thread to lime. 21 series – 18 sbn

Change the color of the thread to the dairy 22-25 row – 18 sbn
Change the color of the thread to a lilac 26 row – 18 sbn
Change the color of the thread to a lime 27-28 row – 18 sbn
Change the color of the thread to a lilac 29 row – 18 sbn
Change the color of the thread to the milk 30-33 row – 18 sbn
Change the color of the thread on the lime 34 row – 18 sbn
Change the color of the thread to a lilac 35-36 row – 18 sbn
Change the color of the thread to the lime 37 row – 18 sbn
Change the color of the thread to milk 38-40 – 18 sbn
Then we knit with turning rows. This is necessary to ensure that the unicorn’s head is located under
angle and looked down.
41 series – 6 sb, ss in the 7th loop, 1.vp, unfold 42 rows – 7 sb, ss in the 8th loop, 1.vp,
unfolding
43 row – 8 sb, sb in the 9th loop, 9 sbg, ss in the 1st loop of the “lifting” part. Fill up, cut off the thread,
leaving a long end for stitching.

2 stage. Head.
1 row – 6 sb in the ka.
2 rows – 6 pr (12)
3 row – (1 sb, pr) * 6 (18)
4 row – (2 sb, pr) * 6 (24)
5 row – (3 sb, pr) * 6 (30) 6-8 row – 30 sb
9 row – (4 sb, pr) * 6 (36) 10-12 row – 36 sbn
13th row – 11 sb, (pr, 5 sb) * 2, pr, 12 sb (39)
14th row – 39th c.
15 series – 12 sbn, (pr, 6 sbn) * 2, pr, 12 sb (42)
16th row – 42 centimeters
17 series – 13 sbn, (pr, 7 sb) * 2, pr, 12 sb (45)
18th row – 45 cd
19 series – 14 sbn, (pr, 8 sbn) * 2, pr, 12 sb (48) 20-25 series – 48 sbn
26 row – (6 сбн, уб) * 6 (42)
27 row – (5 sb, ub) * 6 (36)
At this stage, I usually insert a container from under the kinder surprise with beads. Container
we cover from all sides with a holofiber, the head of the rattle should be soft. Between 16 and 17
rows we insert safe (screw) eyes, leaving between them 7 sb.
28 row – (4 сбн, уб) * 6 (30)
29 row – (3 sb, ub) * 6 (24)
30 row – (2 sb, ub) * 6 (18)
31 rows – (1 сбн, уб) * 6 (12)
32 row – 6 ub (6)
Close the hole, hide the thread.

Stage 3. Ears.
We knit two parts.
1 row – 6 sb in the ka.
2 row – 6 rolls
3 row – (1 sb, pr) * 3 (9)
4 row – 9 sbn
5 row – (2 sb, pr) * 3 (12)
6 row – 12 сбн
7 row – (3 sb, pr) * 3 (15)
Cut the thread, leaving a long end for stitching.

4 th stage. Horn.
1 row – 5 sb in the ka.
2 rd row – 5 sbn
3 row – (1 sb, pr) * 2, 1 sbn (7)
4 row – 7 sbn
5 row – (2 sb, pr) * 2, 1 sb (9) 6-9 row – 9 sbn
Fill, cut the thread, leaving a long end for stitching.

5 stage. Mane
1st strand (2 pieces in different colors) 1 row – 40 v. + 1 VPP
2 rows – 40 pr (80)
Cut the thread, leaving a long end for sewing. 2nd strand (2 pcs in different colors)
1 row – 30 bp. + 1 VPP
2nd row – 30 pr (60)
Cut the thread, leaving a long end for sewing. 1st strand (2 pcs in different colors)
1 row – 20 volts. + 1 VPP
2 rows – 20 pr (40)
Cut the thread, leaving a long end for sewing.
Stage 6. Decor.
We decorate the unicorn with a muzzle: we embroider the crooks, cilia, and mouth. Sew the horn, ears, mane.
We connect the head with the handle. Rattle ready!

Amigurumi The Elephant Rattle Free Pattern

Ears: 2 parts of gray color and 2 details of blue (4 items in total)
1) 2 in, 6 sb in the first loop (6)
2) aprox6 (12)
3) (1, app) x6 (18)
4) 1, arr., (2, arr.) Х5, 1 (24)
5) (3, app) x6 (30)
6) 2, arr., (4, arr.) Х5, 2 (36), сс, cut the thread, restoring edge, and thread on the wrong side.
Fold two pieces of different colors with the wrong sides each to a friend and attach a thread of gray color. In this case, the blue side must be on top. To knit one row of sb, connecting both parts.
After the last column, make ss in the first column of the strapping and then 1 in, fold the eye in half and tie another 3 sb and 1 ss, joining halves, make a knot and then cut the thread, leaving long tail for sewing.
The ears are sewn as follows: upper fastened
The side of the ears is sewn at an angle to the muzzle, so that later on it could be put on your head. The upper part of the ears is located approximately 6 rows above eye level. After the upper part sewed, put the ears on the head and sew the inner edge of the ears flat to the head at eye level (I got 5 sb in side from the eyes and 3 rows down (to the fourth sewn). Visually Side of the ears should be at the level of the handles. This is done for In order to deploy the ears in relation to the muzzle.

Trunk: 1 piece
1) 2 in, 6 sb in the first loop (6)
2) 1 row behind the back half loop (6)
3) 1 row (6)
4) 3 sb, 3 sb for the rear half-loops (6)
5) 1 row (6)
6) 3 sb, 3 sb for the front half-loops of the fourth row (tighten the thread tightly) (6)
7) (1, app) x3 (9)
8) 1 row (9), 2 cc, cut the thread, leaving a long tail for sewing, and restore the edge.
The trunk is not stuffed, sewn exactly in the middle between with the tip pointing upwards through the edge of the columns.

Materials:
• cotton yarn or cotton / acrylic (Alize Cotton Gold, YarnArt Jeans, Vita Lira, etc.);
• eyes for toys (safe – with fixing from the inside of the part);
• Synthesis or other suitable material for packing;
• a wooden ring with a diameter of 55 mm;
• a rattle (a container with beads or special accessories).
Instruments:
• hook number 2;
• scissors;
• tweezers or packing clamps;
• Needle.
Legend:
• Вп – air loop
• ss – connecting bar
• sbn – column without crochet
• ub. – decrease
• arr. – an increase

Amigurumi Rattle Giraffe Free Pattern

Tie the ring:
Type on the thread about 13 in. Try on the ring. The harness should not be too tight to be able to turn the ring under it, but it should not hang too. We close the chain in a ring around the wooden base and begin to knit spirally bunches without a crochet until we tie the whole base. As you knit, rotate the knitting around the base. When you come to the end, align the entire canvas and sew the ends of the strap. Thread the knot and put it in the linen.
Muffle:
Again, dial on the thread vn, this time around 16 (try on the knotted ring). Close in the ring and make a lift loop. You need to knit this part with cc and bn in each row. We knit this way 18 rows. At the end of the last row, change the thread color on the other, we fill the tails into posts. We knit the last ss, stretch the thread and restore the edge of the part (cut the thread to a sufficient length), then fill it with the wrong side. We attach the thread of the same color to the other side of the muff, and we also tie it and decorate it. The total should be 20 rows. We unfold the muff with the seam down, on the inner side of the ring.
Handles: 2 parts in a spiral without insertion and ss
1) 2 in, 6 sb in the first loop (6) or the ring amigurumi
2) aprox6 (12)
3) (1, app) x6 (18)
4) 1, arr., (2, arr.) Х5, 1 (24)
5-6) 2 rows (24)
7) (2, уб.) Х6 (18)
8-9) 2 rows (18)
10) (1, уб.) Х6 (12)
Fold in half and connect the halves with 3 sbn, knot, cut the long thread for sewing. Handles we sew to the seventh row of a muff from each side, we tie a string with a knot and hide it.
Head: spirally absent and ss
1) 2 in, 6 sb in the first loop (6) or the ring amigurumi
2) aprox6 (12)
3) (1, app) x6 (18)
4) 1, arr., (2, arr.) Х5, 1 (24)
5) (3, app) x6 (30)
6) 2, arr., (4, arr.) Х5, 2 (36)
7) (5, app) x6 (42)
8) 3, prib., (6, arr.) X6 (48)
9) (7, ap) x6 (54)
10) 4, arr., (8, arr.) Х5, 4 (60)
11-18) 8 rows (60), the eyes are inserted after 14 rows at a distance of 14 sb from each other
19) 4, уб., (8, уб.) Х5, 4 (54)
20) (7, уб.) Х6 (48)
21) 3, уб., (6, уб.) Х5, 3 (42)
22) (5, уб.) Х6 (36)
23) 2, уб., (4, уб.) Х5, 2 (30)
24) (3, уб.) Х6 (24), here you can put a rattle in the head
25) 1, уб., (2, уб.) Х5, 1 (18)
26) (1, уб.) Х6 (12), сс, cut and thread the long thread for sewing, restore the edge.
Ears: spirally
1) 2 in, 6 sb in the first loop (6) or in the ring amigurumi
2) 1 row (6)
3) aprox6 (12)
4) (1, app) x6 (18)
5) 1, arr., (2, arr.) Х5, 1 (24)
6-7) 2 rows (24)
8) 1, уб., (2, уб.) Х5, 1 (18)
9) 1 row (18)
10) Уб.х12 (12), сс, cut the long thread for sewing and fill it.
Horns: spirally
1) 2 in, 6 sb in the first loop (6) or in the ring amigurumi
2) aprox6 (12)
3) 1 row (12)
4) уб.х6 (6)
5-6) 2 rows (6), ss, cut the long thread for sewing and fill it.
Muzzle: spiral
1) 4 in, beginning with the second from the hook loop: 2 sb, 3 sbn in the extreme loop, on the other side 1 sb, 2 sb in the extreme loop (8)
2) prib., 2 sbn, pr.x3, 2 sb, prix.x2 (14)
3) 1 сбн, приб., 2 сбн, приб., 1 сбн, приб., 1 сбн, приб., 2 сбн, приб., 1 сбн, приб. (20), 2 ss, cut the long thread for sewing and fill it.
Bow:
8 in, then we knit with turning ten rows. In the end, we make 1 in, and we tie a rectangle around the perimeter (in the corners of 3 sb). We transfer the yarns to the middle of the wide part, pull out a very long thread (about a meter), restore the edge. Then add a rectangle and fix the folds with a needle, then wrap the butterfly in the middle. We fasten the thread with several stitches, pull out the loop and knit about 14 inches (try on the neck of the toy). We tighten the thread with a knot, wrap a chain around the neck of the toy and sew it to the bow on the other side.

Materials:
• cotton yarn or cotton / acrylic (Alize Cotton Gold, YarnArt Jeans, Vita Lira, etc.);
• eyes for toys (safe – with fixing from the inside of the part);
• Synthesis or other suitable material for packing;
• a wooden ring with a diameter of 55 mm;
• a rattle (a container with beads or special accessories).

Instruments:
• hook number 2;
• scissors;
• tweezers or packing clamps;
• Needle.

Legend:
• Вп – air loop
• ss – connecting bar
• sbn – column without crochet
• ub. – decrease
• arr. – an increase

Tie the ring:
Type on the thread about 13 in. Try on the ring. The harness should not be too tight to be able to turn the ring under it, but it should not hang too. We close the chain in a ring around the wooden base and begin to knit spirally bunches without a crochet until we tie the whole base. As you knit, rotate the knitting around the base. When you come to the end, align the entire canvas and sew the ends of the strap. Thread the knot and put it in the linen.

Muffle:
Again, dial on the thread vn, this time around 16 (try on the knotted ring). Close in the ring and make a lift loop. You need to knit this part with cc and bn in each row. We knit this way 18 rows. At the end of the last row, change the thread color on the other, we fill the tails into posts. We knit the last ss, stretch the thread and restore the edge of the part (cut the thread to a sufficient length), then fill it with the wrong side. We attach the thread of the same color to the other side of the muff, and we also tie it and decorate it. The total should be 20 rows. We unfold the muff with the seam down, on the inner side of the ring.

Amigurumi Rattle Pooh Giraffe Free Pattern

Handles: 2 parts in a spiral without insertion and ss
1) 2 in, 6 sb in the first loop (6) or the ring amigurumi
2) aprox6 (12)
3) (1, app) x6 (18)
4) 1, arr., (2, arr.) Х5, 1 (24)
5-6) 2 rows (24)
7) (2, уб.) Х6 (18)
8-9) 2 rows (18)
10) (1, уб.) Х6 (12)
Fold in half and connect the halves with 3 sbn, knot, cut the long thread for sewing. Handles we sew to the seventh row of a muff from each side, we tie a string with a knot and hide it.

Head: spirally absent and ss
1) 2 in, 6 sb in the first loop (6) or the ring amigurumi
2) aprox6 (12)
3) (1, app) x6 (18)
4) 1, arr., (2, arr.) Х5, 1 (24)
5) (3, app) x6 (30)
6) 2, arr., (4, arr.) Х5, 2 (36)
7) (5, app) x6 (42)
8) 3, prib., (6, arr.) X6 (48)
9) (7, ap) x6 (54)
10) 4, arr., (8, arr.) Х5, 4 (60)
11-18) 8 rows (60), the eyes are inserted after 14 rows at a distance of 14 sb from each other
19) 4, уб., (8, уб.) Х5, 4 (54)
20) (7, уб.) Х6 (48)
21) 3, уб., (6, уб.) Х5, 3 (42)
22) (5, уб.) Х6 (36)
23) 2, уб., (4, уб.) Х5, 2 (30)
24) (3, уб.) Х6 (24), here you can put a rattle in the head
25) 1, уб., (2, уб.) Х5, 1 (18)
26) (1, уб.) Х6 (12), сс, cut and thread the long thread for sewing, restore the edge.

Ears: spirally
1) 2 in, 6 sb in the first loop (6) or in the ring amigurumi
2) 1 row (6)
3) aprox6 (12)
4) (1, app) x6 (18)
5) 1, arr., (2, arr.) Х5, 1 (24)
6-7) 2 rows (24)
8) 1, уб., (2, уб.) Х5, 1 (18)
9) 1 row (18)
10) Уб.х12 (12), сс, cut the long thread for sewing and fill it.

Horns: spirally
1) 2 in, 6 sb in the first loop (6) or in the ring amigurumi
2) aprox6 (12)
3) 1 row (12)
4) уб.х6 (6)
5-6) 2 rows (6), ss, cut the long thread for sewing and fill it.

Muzzle: spiral
1) 4 in, beginning with the second from the hook loop: 2 sb, 3 sbn in the extreme loop, on the other side 1 sb, 2 sb in the extreme loop (8)
2) prib., 2 sbn, pr.x3, 2 sb, prix.x2 (14)
3) 1 сбн, приб., 2 сбн, приб., 1 сбн, приб., 1 сбн, приб., 2 сбн, приб., 1 сбн, приб. (20), 2 ss, cut the long thread for sewing and fill it.

Bow:
8 in, then we knit with turning ten rows. In the end, we make 1 in, and we tie a rectangle around the perimeter (in the corners of 3 sb). We transfer the yarns to the middle of the wide part, pull out a very long thread (about a meter), restore the edge. Then add a rectangle and fix the folds with a needle, then wrap the butterfly in the middle. We fasten the thread with several stitches, pull out the loop and knit about 14 inches (try on the neck of the toy). We tighten the thread with a knot, wrap a chain around the neck of the toy and sew it to the bow on the other side.