Amigurumi Baby Monkey Free Pattern

HEAD-BODY – Red yarn.
1) In the ring amigurumi 6 sc.
2) 6 pr. = 12 sc.
3) (1 sc, pr) 6 = 18 scn
4) (2 sc, pr) 6 = 24 sc.
Pink yarn.
5-11) 24 СБН
12) (2 СБН, уб.) 6 = 18 СБН
13) (1 СБН, уб.) 6 = 12 СБН To
fill the head.
14) (2 СБН, уб.) 3 = 9 СБН
15) 9 пр = 18 СБН
16-23) 18 СБН — To fill the body.
24) (1 СБН, уб.) 6 times = 12 СБН
25) 6 уб. = 6 СБН – Hole to pull off.
Note, in the original, you can tie the body of a monkey from two halves. A container is inserted inside.
Then we knit the body like this.
14) (2 СБН, уб.) 3 times = 9 СБН
15) 9 пр = 18 СБН
16-20) 18 СБН
This is the upper part of the body.
Lower part of the body is knitted from below.
1) In the ring amigurumi 6 sc.
2) 6 pr = 12 scs
3) (1 sc, pr) 6 times = 18 scs
4-7) 18 RLS
LEGS-HANDS: Red yarn.
1) In the ring amigurumi 7 scn.
2) -5) 7 RLS
Pink yarn.
6-17) 7 RLS
You can not stuff.
TAIL: Red yarn.
1) In the ring amigurumi 7 scn.
2-5) 7 RLS
Pink yarn.
6) -9) 7 RLS
Red yarn.
10-13) 7 RLS
Pink yarn.
14-24) 7 RLS
You can not stuff.
EARNS: Pink yarn.
1) In the ring amigurumi 6 sc.
2) 6 pr = 12 RLS
MALD: Pink yarn.
1) 7 bp, with 2d: 5 sc, 3 sc in 1y, 4 sc, pr = 14 cbn
2-3) 14 cbn
4) 9 cbn, ss (incomplete row)
Note, in the original 1 row is knitted yarn of a different color.
ASSEMBLY AND PREPARATION
1) Sew the handle feet and the tail.
2) Sew the muzzle (incomplete row below) and the ears.
3) Sew or glue eyes.
4) Embroider with black yarn nostrils and mouth.
5) Decorate (dress) a monkey to your taste.

Baskets With Monkey Free Pattern

The description of the monkey is very easy to adapt to any capacity or jar. You will need to change only the length of the torso and the length of the arms.

And now the process itself:

All the work was built on 2 diagrams:

Scheme of the Circle:

Oval pattern (for head and body):

Tartlet

I knitted it in the group “needlework and creativity with solar”.

Plastic jar took a diameter of 11.5 cm and a height of 9 cm. The bottom was knitted on the scheme “circle”, the wall of the basket is knocked behind the rear walls without additions. Then 2 parts (external and internal) connected together by connecting columns.

Head and Body

Brown thread.

1-3 P: Knit on the scheme oval-Add (40)

4-17 r: 40 SBN (40)

18-20 P: Knit on the scheme Oval 3 p., but in reverse order, making Ubavki (22)

21 P: As the 1st P. Schemes Oval-Ubavki (3 svn together, 8 SBN, 3 SBN together, 8 SBN) (18)

22 P: 18 SBN (18) neck

23p: As the 1st P. Scheme Oval-increments (24)

24 P: As the 2nd P. Scheme Oval-increments (30)

25-47 P: 30 SBN (30)

48 P: As the 2nd P. Oval Scheme-Ubavki (24)

49 P: As the 1st P. Scheme Oval-Ubavki (18)

50-51 P: As the 1st P. Scheme Oval-Ubavki (3 SBN together) (14)

The ready head with a body slightly to fill with synpoom and to sew. It should be a flat shape, about 2.5-3 cm thick.

Important! The length of the body should be equal to the height of the jar!

Hands (2 children)

Light threads.

1r: 6 in the Ring Amigurumi (6)

2R: OL * 6 (12)

3r: (1 SBN, D) * 6 (18)

4r: (2SBB, D) * 6 (24)

5 -8 P: 24 SBN (24)

9 p: UB, 10 SBN, UB, 10 SBN (22)

10 p: UB, 9 SBN, UB, 9 SBN (20)

11R: UB, 8 SBN, UB, 8 SBN (18)

Brown thread.

12 p: 18 SBN (18)

Then knit another 27 p. Straight, like 12 p. (hand length 12 cm)

Fill with a little synth.

Tail

Brown thread.

1r: 6 in the Ring Amigurumi (6)

2R: OL * 6 (12)

Further knit another 48 R. (12) (tail length 22 cm)

The wire (approximately 24 cm) on the ends of the bends and gently wound the synth, insert into the tail.

Ears (2 parts)

Light threads.

1r: 6 in the Ring Amigurumi (6)

2R: OL * 6 (12)

3r: (1 SBN, D) * 6 (18)

4r: (2SBB, D) * 6 (24)

5r: (3 SBN, D) * 6 (30)

Fold in half and tie together with brown threads.

Legs (2 parts)

Light threads.

1r: 6 in the Ring Amigurumi (6)

2R: OL * 6 (12)

3r: (1 SBN, D) * 6 (18)

4-5 P: 18 SBN (18)

6 P: Ave, 8 SBN, D, 8 SBN (20)

7 p: Knit under the scheme below 1p (left and right)

Fill the legs with a little bit of synth and then tie around, connecting the fingers together with the connecting Poles.

Eyes (2 details)

Thin black thread, I have “Iris”, Hook 1.1

1r: 6 in the Ring Amigurumi (6)

Thin blue threads, I have iris

2R: OL * 6 (12)

Hide the threads and sew the white beads neatly, as pictured.

Hair

Brown thread.

Knitting a chain in length of 9 sm, and 1 p. Снн with the extended loops in height of 2 sm (I have wrapped up a ruler). Fold in half and sew.

Muzzle and its decoration

Light threads.

1r: 6 in the Ring Amigurumi (6)

2R: OL * 6 (12)

3r: (1 SBN, D) * 6 (18)

4r: (2SBB, D) * 6 (24)

5r: (3 SBN, D) * 6 (30)

6-7 P: 30 SBN (30)

8r: (4 SBN, D) * 3 times; 15 SBN (33)

9r: 5 SBN; In the trail. Loop (SBN, PSN, с1n, PSN, SBN)-(in this loop then we will make eye) 5 SBN;

In the trail loop (SBN, PSN, с1n, PSN, SBN)-(eye), 21 SBN (41)

10r: 7 SBN, D, 2 SBN, UB, SBN, UB, 2, D, 23 SBN (41)

11R: Evenly in the circle to add another 6 SBN, and between the eyes to make 2 Ubavki (45)

Then we make face (as in the photo).

In places where in the 9th row we have knitted 5 loops in 1 SBN, we prišhivayem our bound eyes. Brown threads embroider the nose. From the brown thread knit a chain of the EAP and make a mouth.

Important! The mouth is sewing the same thread, making the fixup only in the corners, then the monkey can build different faces!

Face fill with a synth and sew a thread of light color (the one that is knitted face) with a secret stitch to the head.

Important! Further, without lifting a thread, by secret stitches, we sew a semicircle under eyes, as on a photo (a black dotted line), a synth at this shift downwards, then the muzzle will turn out more relief (in the area of an eye synthepon should not be).

Assembly

Ears and hair are nailed to the head.

Stick to the torso of the hand.

We attach the carcass and arms to the basket.

The tail is pressed first for a wire ring, then in a circle and bend, as it is pleasant.

The legs are nailed.

Decorate with a bow. (In fact, there are a lot of decorating options: You can tie a hat; You can sew the skirt on the back and attach the bow to your hair, etc. All in your hands!)

The basket with the monkey is ready. All nice knitting and smooth eyelets. I would be glad if my description is useful, and you do we owe your relatives, friends or familiar budget gift.

And a few photo ideas with gifts:

The handkerchief will be a wonderful gift for both the young girl and the business Lady of the balsamic age.

Socks connected with their hands will warm up in any weather.
Threads will always be happy to the needlewomen.

Materials: 
– yarn “Dolce” – 
hook number 4; 
– filler; 
– needle with a wide ear; 
– floss threads in tone for sewing parts; 

Abbreviations:

KA-ring amigurumi 
VP-air loop 
SS-connecting column 
SBN-column without the imposition of 
PR-increase 
UB-decrease 

Amigurumi Workshop Monkey Free Pattern

Head: 
1) 6 in KA 
2) 6 PR (12) 
3) (1 SBN, PR) * 6 (18) 
4) (2 SBN, PR) * 6 (24) 
5) (3 SBN, PR) * 6 (30) 
6-9) 30 SBN 
10) (3 SBN, UB) * 6 (24) 
11) (2 SBN , UB) * 6 (18) 
12) (1 SCN, UB) * 6 (12) 
13) 6 subtracts 

Body: 
1) 6 SCS in KA 
2) 6 PR (12) 
3) (1 SBN, PR) * 6 (18) 
4) (2 SBN, PR) * 6 (24)
5) (3 SBN, PR) * 6 (30) 
6-10) 5 rows straight (30) 
11) (3 SBN, UB) * 6 (24) 
12) unchanged (24) 
13) (2 SBN, UB ) * 6 (18) 
14) unchanged (18) 
15) (1 SBN, UB) * 6 (12) 
16) unchanged 1 or 2 rows. 

Muzzle: 
1) Dial 6 VP, in the 2nd loop 4 SNS, 3 SNS in the last 
loop, 3 SNS, OL (12) 
2) OL, 3 SNS, 3 OL, 3 SNS, 2 OL (18) 
3) 1 Sc, Bd, 3 Scn, (1 Scn, Pr) * 3p, 3 Scn, (1 Scn, Pr) * 2 
(24) 
4-5) 24 Scn. 

Hands: 
1) 6 in the AC 
2) (1 SCN, PR) * 3 (9) 
3-5) 9 SCN 
6) 1 UB, 7 SCN ​​(8), then about 8 more rows. (8 sc) 4 
increments. 

Feet: 
1) 5 in SC
2) 5 prib. (10) 
3) (1 SBN, PR) * 5 (15) 
4) behind the back wall 15 SBN 
5) 15 SBN 
6) 3 SBN (UB, 1 SBN) * 3, 3 SBN (12) 
7) 4 SBN, 2 UB, 4 sc (10) 
Further rows 8 straight. 5 down. 

Ears: 
1) 6 in the AC 
2) 6 app (12) 
3) (1 SCN, PR) * 6 (18) 
4) (2 SCN, etc.) * 6 (24) 
5-6) 24 SBN 
Tail: 
1) 5 in SC 
We knit in a circle to the desired length.

That’s such a nice monkey turns out. Thanks to the author for the description of knitting.

Abbreviations :
sbn – column without crochet,
in-the-air loop,
ka-ring amigurumi,
increase,
pr-increase.
We knit in a spiral, we fill as we knit. 
Toy with a wire frame of 1.5 mm. The main thread – Pekhorka “childish whim” 50% of merino, 50% of fiber, beige threads – “Jeans” cotton 

Amigurumi Sweet Monkey Free Pattern

Head-trunk
1 row. 6 loops in the spacecraft = 6 
2 row. 6 pr = 12 
3 row (sb, pr) x 6 times = 18 
4 row (2 sb, pr) x 6 times = 24 
5 rows (3 scales, pr) x 6 times = 30 
6 row (4 sb, pr) x 6 times = 36 
7 row (5 sb, pr) x 6 times = 42 
8 -17 rows – 42 sb 
18 rows (5 sb, yb) x 6 times = 36 
19 row (4 sb, ub) x 6 times = 30 
20 row (3 sb, уб) х 6 times = 24  
21 row (2 сбн, уб) х 6 times = 18, place the marker (the marker is in the middle of the back) 
22-25 rows – for 18 сбн 
remove the wire for the front ones paws 
26-27 rows – 18 sbn 
28 series (2 sb, pr) x 6 times = 24 
29 row – 24 sb 
30 row (3 sb, pr) x 6 times = 30
31 row – 30 sb 
32 row (4 sb, pr) x 6 times = 36 
33 row – 36 sb 
to remove the wire for the tail 
34 row (2 sb, pr) x 4 times, 9 sb, (2sb, pr) x5 times = 45 
35 -45 rows – 45 sbn 
46 rows (13 sb, yb) x3 times = 42  
withdraw wire for hind legs 
47 row (5 sb, уб) х 6 times = 36 
48 row (4 сбн, уб) х 6 times = 30 
49 row (3 sab, yb) x 6 times = 24 
50 row (2 sb, yb) x 6 times = 18 
51 row (1 sab.yy) x 6 times = 12 
52 row 6 yb = 6 
pull off the hole, fasten the thread, leave a long end for the formation of the tighteners. 
Make the umbilical umbilical cord and priests. 

Muzzle
1 row. 6 loops in the spacecraft = 6 
2 row. 6 pr = 12
3 row (sb, pr) x 6 times = 18 
4 rows (2 sb, pr) x 6 times = 24 
5 row (3 sb, pr) x 6 times = 30 
6 row (4 sb, pr) x 6 times = 36 
7 row (5 sb, pr) x 6 times = 42 
8 -11 rows – 42 sbn 
12 rows (12 sabers) x 3 times = 39 
13 rows – 39 sb 
14 rows (11 sb, yb) x3 = 36 
15 row – 36 сбн 
16 row (10 сбн, уб) х3 = 33 
slightly to fill, between 6 and 12 rows to lay a fold for the lower lip, to stitch well, fix the thread. 
Sew a muzzle to a head. The upper border is at the level of the 12th row of the head, the lower one at the level of the beginning of the neck. 

“Mask” and eyes
beige thread 
1 row 8 sbn in the KA, turn knitting 
2 rows – in, (1 sb, pr) x 4 times = 13. turn knitting
3 row – in. (2 sabers) x 4 times = 17, turn knitting, change the thread to brown 
4 row – bp, pr, (3 sb, pr) x 4 times = 22, turn knitting 
5 row 22 sb, turn knitting 
6 row 22 sbn , turn the 
7th row of sb, (2 sb, yb) x 5 times, sbn = 17 
leave the end of the thread for sewing. 

The eye squirrels – 8 sb in the spacecraft, close. 
Sew a “mask”, 8 mm squirrels and beads to the head  

Ears
1 row 8 sb in the spacecraft, rotate the 
2nd row 8 pr = 16, rotate the 
3rd row, 16 sb 
Sew at eye level  

Tail
1 row – 6 sb in the KA 
2-40 rows – 6 sc,  
pull  

Fore Foot
start brown thread 
1 row 6 in SC sc
2-35 – 6 сбн, go to the beige thread 
36 row (1 сбн, пр) х 3 = 9,  
37-39 rows – to 9 сбн, insert wire with a loop in the palm 
40 row pr, 3 сбн, пр, 4 сбн = 11 
41 row yb, fold the palm in half, (3 in, 4 sb on these VP, sb in the palm, connecting the two halves) x 4 times. This will be your fingers, pull the thread 3 rows down and tie your thumb.  

The hind paw
a) the shin 
1 row – 6 sb in the KA 
2-15 rows – 6 sb 
b) stop 
1 row 6 sb in the KA 
2 row – (1 sb, pr ) х 3 times = 9,  
3 row -3 сбн, 2 вп, skip 2 loops, 4 сбн = 9 
4-6 – 9 сбн 
7 row – pr, 3 сбн. pr, 4 sbn = 11 
8-10 rows – 11 sbn each
Fill the foot slightly, insert the wire into the drumstick and foot, while making a loop of the wire in the foot, 
row 12 – fold the foot in half, ub (3 in, 3 sb on these loops, sb in the foot, connecting the two halves) x 4 times, thread on 4 rows below and bind the thumb. 

Finish the design: sew the shank to the foot and to the body, sew the hands to the trunk, the tail. Embroider a mouth with a contrasting thread. 
The monkey is ready. Hooray!

More Amigurumi Monkey Ideas:

The advantage of this toy is that the head, body and legs tally one detail, that is, the toy has a special durability, which is very important, if its owner is still a baby. I suggest to associate such a funny friend for your or familiar child!

Amigurumi Cute Monkey Free Pattern

Head and Body
Range 1:2 VP, 6 PRS in 2nd loop from Hook (6)
Range 2:6 Additions (12)
Row 3: (PRS, raise) in a circle (18)
Row 4: (2 PRS, raise) in a circle (24)
Row 5: (3 PRS, raise) in a circle (30)
Row 6: (4 PRS, raise) in a circle (36)
Series 7: (5 PRS, raise) in a circle (42)
Row 8: (6 PRS, raise) in a circle (48)
Row 9: (7 PRS, raise) in a circle (54)
Range 10-20: PRS (54)
Row 21: (7 PRS, decrease) in a circle (48)
Range 22: (6 prs, decrease) in a circle (42)
Row 23: (5 PRS, decrease) in a circle (36)
Range 24: (4 PRS, decrease) in a circle (30)
Series 25: (3 PRS, decrease) in a circle (24)
Number 26: (2 PRS, decrease) in a circle (18)
Number 27: (PRS, decrease) in a circle (12)
Range 28: PRS (12)

Continue to knit the body, change the color of the yarn to white
Row 29: (PRS, increase) in a circle (18)
Change the color of the yarn to red
Number 30: (2 PRS, raise) in a circle (24)
Change color
Row 31: White: PRs in a circle (24)
Range 32: Red: 24 PRS
Range 33: White: 24 PRS
Range 34: Red: 24 PRS
Range 35: White: 24 PRS, change the color of the yarn to the main
Series 36: Tie behind the back wall of loops: 24 PRS
Row 37: For both walls: 24 PRs. We’re starting to untie my legs!
You must be in the middle of the body, if it is not, then bind the desired amount of PRS to the middle. It is necessary to use half loops, i.e. 12 PRs of the previous series. Untie 4 EAP and connect it and the opposite wall of the torso, dividing it into hit (see photo)
Continue to knit on the half, from 39 to 63 series (15-16 loops in a row)
Range 64: (PRS, decrease) 5 times (10)
Range 65: (Skip Loop, PRS) 5 times (5)
Repeat the same for the second leg.

Muzzle
Knit according to the scheme, preferably a lighter shade of the main color of the yarn.
Ears
Repeat the first 4 rows of the body.
Row 5: PRs in a circle (24)
Row 6: (2 PRS, decrease) in a circle (18)
Row 7: (PRS, decrease) in a circle (12)
Row 8: Decreases in a circle (6), you do not need to beat your ears.

Paws
Series 1:2 VP, 5 PRS in 2nd loop from Hook (5)
Range 2:5 Additions (10)
Row 3: (PRS, raise) in a circle (15)
Row 4: PRs in a circle (15)
Row 5: PRS, 5 bars with factionss with a common vertex in 1 loop (Vyvjazyvaem thumb), 13 PRS (15)
Row 6: PRs in a circle (15)
Row 7: (PRS, decrease) in a circle (10)
Range 8-24: PRS (10)
Range of 25:5 decreases.

Tail
2 VP, 4 PRS in 2nd loop from the hook.
Make a raise in each PRS, tie a circle 108 PRS (or 27 rows of 4 loops in a row).

Assembly
Sew to the head of the muzzle, decorate it, sew ears. Sew to the body paws and tail, head.

Legend:
SBN – single crochet column 
psn – double crochet     

Amigurumi Sweet Monkey Free Pattern

Head

Light thread 
1. Chain of 8 VP, in the 2nd loop 2sbn, then one line in each  loop of the chain, in the last 4 line, we knit in a circle, not turning in the opposite direction, then 1 line in each loop of the chain, last 2 sat = 18 bou. 
2. Increase x2, 1 sbn x5, increase x4, 1 sbn x5, increase x2 = 26 sbn. 
3 – 4. 26 Arb. 
5. 1 sbn x2, 2 pssn x9, 1 sbn x15 = 35 
6. 1 sbn x2, (increase of 2 psn, 1 pssn) x9, 1 sbn x15 = 44 
Brown thread 
7 – 12. 44 sbn, 7 row knit behind the rear wall 
13. (20 sbn, decrease) x2 = 42 sbn 
14. (5 sbn, decrease) x6 = 36 sbn 
Start packing with filler 
15. (4 sbn, decrease) x6 = 30 sbn
16. (3 sbn, decrease) x6 = 24 sbn 
17. (2 sbn, decrease) x6 = 18 sbn 
18. (1 sbn, decrease) x6 = 12 sbn 
Add padding 
19. decrease x6 = 6, tighten all the loops with another thread colors, darker than the muzzle itself, for the front thread of 7 rows of sbn – 44sbn.

Ears
Light beige thread 
1. 6 sbn in the ring amigurumi 
2. 12 sbn 
3. (increase, 1 sbn) x6 = 18 sbn 
4. (increase, 2 sbn) x6 = 24 sbn 
5. (increase, 3 sbn) x6 = 30 sbn 
Brown thread 
6. Connecting station in a circle = 30cc

Pens
Light thread 
1. 6 sbn in amigurumi ring 
2. Increase x6 = 12 sbn 
3. 12 sbn 
Brown thread 
4. Decrease x3, 1 sbn x6 = 9 sbn 
5. 1 sbn, increase, 1 sbn 7 = 10 sbn 
6 – 17. 10 UB 
18. Reduce x5 = 5 UB
Fill with 
19. fill all loops

Legs
Light thread 
1. 8 VP, in the 2nd VP 3 sbn, 1 sbn in the next 4 loops of the chain, 3 sbn in the 
last peel of the chain, turn in a circle, 1 sbn in 4 loops = 
14 sbn 
2. Increase x3, 4 sbn , increase x3, 4 sbn = 20 sbn 
3. 20 sbn 
Brown thread 
4. 20 sbn 
5. Decrease x3, 1 sbn x14 = 17 sbn 
6. 3 sbn knit together, 1 sbn x6, slack, 1 sbn x6 = 14 sbn 
7 Increase, 1 CBN x6, increase, 1 CBN x6 = 16 CBN 
8 – 9. 16 CBN 
10. (decrease, 1 CBN) x5, 1 CBN = 11 CBN 
11. decrease x5, 1 CBN = 6 CBN
Fill in with filler 
12. pull off the hinges.

Torso
1. 6 sbn to amigurumi ring 
2. Increase x6 = 12 sbn 
3. (increase, 1 sbn) x6 = 18 sbn 
4. 18 sbn 
5. (increase, 2 sbn) x6 = 24 sbn 
6. 24 sbn 
7. (increase , 3 sbn) x6 = 30 sbn 
8. 30 sbn 
9. (gain, 4 sbn) x6 = 36 sbn 
10 – 15. 36 sbn 
16. (subtract, 4 sbn) x6 = 30 sbn 
17. 30 sbn 
18. (subtract , 3 sbn) x6 = 24 sbn 
19. (decrease, 2 sbn) x6 = 18 sbn 
20. (decrease, 1 sbn) x6 = 12 sbn 
21. decrease of x6 = 6 sbn 
22. pull all loops
According to this description it is possible to relate such amigurum-toys 4. 5.

In order to bind a monkey you need to be able to: knit an air loop, connecting column, column without crochet; to make increases and decreases; knit in a circle (spirally).

Materials:
yarn of different colors for the monkey and clothes (in detail in the text);
red fine yarn (for the mouth);
white medium-thick yarn (for eye proteins);
two black beads or ready eyes;
Monofilament or fine thread under the color of the yarn;
holofayber or other filler;
if desired: small buttons, acrylic colors or pastels.
Instruments:
crochet hooks;
needle with a large eye;
sewing needle;
ruler.
All details that are knitted in a circle, we knit in a spiral (without loops lifting). We knit the stitches without the crochet.
For a monkey, it’s better to take a medium-thick yarn – acrylic, half woolen or woolen.
The head and legs of the monkey, I knitted from acrylic yarn unidentified thickness and footage. Therefore, in the master class I will give dimensions resulting parts. In the process of work you will understand how many rows you need to knit. Knitting patterns are uncomplicated – no difficulties arise.

Amigurumi Clown Monkey Free Pattern

Head
1. In the ring amigurumi we sew 6 posts without a crochet and we knit on scheme of the circle (that is, in each row we make 6 additions). Should get a circle about 4 cm in diameter (photo A). For me, for this, it was necessary to link 4 rows.
2. Then we knit without adding, until you get a cup with the sides, approximately 1.5-1.8 cm in height (photo B). I tied 3 rows.
3. We send one row, making 5 deductions (photo B). Diameter the resulting “cup” opening should be about 2-2.5 cm.
If you get a little more or less, do not be scared. Monkeys, they are different are).
4. Again we knit without any loss, approximately 1.5 cm (photo D).

5. Then we knit, making 5 adjustments in a row. When there is littlehole, we fill the head and we bind with the discounts, close the hole.Here is a pear obtained:

We knit the earsBefore you knit your ears, note something to the writers, where they will beto be located (2 points per ear). Ears do in the middle of the head orslightly lower. If you do it above, you will not get a monkey, butan unidentified animal.
1. Insert the hook under the bar at the first point of the ear. Pick up the thread andpull out the loop (photo A). “Ponytail” leave a long, it will beto participate in knitting.
2. Tie a chain of 3-4 air loops. Knit with both threads(working and “tail”) (photo B).
3. Attach the chain with a connecting loop at the second point,eyelet loop (photo B).
4. Unfold the head and tie the base with the pillars without the crochet. Whereinknit only with a working thread. “Tail” lay along the loop-base andtie the base together with it (photo D). I got 6 sc. You,Depending on the thickness of the yarn, the bars may be larger orless.
5. Wire the connecting post to the same place from where you startedknitting.

6. Reinstrain the knitting and tie a series of connecting posts.The last connecting bar is tied to the second starting pointknitting (where a chain of air loops was attached, when formingbasis) (photo A). Cut off the yarn leaving the second “tail” more authentic.You got an ear with two “tails”.
7. Fill the top “tail” in the needle. Insert the needle into the base of the tab, andoutput at the back of the head (photo B). Tighten the thread and secure with a knot.
8. Lower the “tail”, also tuck into the needle. In order for the eyeletIt turned out more accurate, insert the needle under the first connectingcolumn of the series (photo B).
9. Insert the needle into the base of the tab, and pull it out at the back of the head (photo D).Pull and fasten the thread.

10. Symmetrically to the first, connect the second tab

If desired, you can tint the muzzle with acrylic paint. For thismoisten the necessary places with clean water. Dilute the paint to the stateliquid ink and brush on the face. I tinted brownpaint the top of the face. A red paint tinted the cheeks andears.
Attention! If you are toning, like me, with acrylic paint, thendo this before you embroider the nose and sew your eyes. IfToning plan to make a pastel (can be pastel pencilsand even powder), then only after you have embroidered the nose and made the eyes.

Before further work, mark the places where the nose will be located,eyes and mouth. Of course, the monkey is stylized. But, in order for itwas recognizable, you need to correctly arrange the details relative to each otherfriend.
Recollect, what features do the great apes have? Absence orcomplete absence of nose bridge. Often a wide nose. Close to each otherset eyes, powerful lower jaw. Sounds awesome? But exactlythese features need to be emphasized so that the monkey turned outmonkey, and not a little man.Embroider your nose
For the nose, take the same yarn as for the head or lighter. Not worth itmake a black or brown nose.
1. Fix the yarn and make the flooring from the cross stitches (photo A).
2. Perpendicular to the first layer, make a second layer. StitchesPlace it close to each other, without overlaps and lumens. Ifwant a nose more convex, then make a couple more layers (photo B). A threadoutput to the back of the head and secure.In the future, the place behind the head, where all the nodules will be, will closeupper part of the trunk – mark this place in advance.

If desired, the nozzle can be tinted.
Making the Eyes
1. Sew a black thread with a bead. Arrange them close to each other andclose or close to the nose. The same concerns ready-made eyes,if you will attach them.

2. At the back of the head, secure the white thread. Bring it out near the bead (photo A).
3. Weave the thread of the eyes. Pin the needle to the start point and output tonape (photo B).
4. Pull the thread and secure (photo B). The resulting loop should notslip off the beads. If the protein of the eye seems too thin andunseen, make a second layer – repeat all the steps again.
5. Bring the needle back to the face, already near the second bead and repeat allprocedure (photo D).
Fasten the thread to the back of the head

Embroider your mouthThe mouth is wide, almost to the ears. And put it low, away fromnose.
1. Take the red thread (I have a “Baby Novelty”) and fasten it to the back of my head.Bring to the face and embroider the base of the mouth seam “back needle” (photo A).
2. Now pick up each stitch in turn andstretch the thread through it. Do not pierce the canvas with a needle. A threadshould only pass under the stitches. Do you like crocheting stitchesof the initial seam (photo B). Always enter the needle in one direction. If youbegan, for example, from right to left, then continue (photo B).
3. It turns out such a neat little shoe (photo D)

We knit a body
Well, we knit a body, it’s loudly said :), we knit a bell-bell.I knitted from Alize fine yarn (half wool, 390 m / 100 g).
1. We start knitting with 6 stitches without a crochet in an amigurumi ring.Next, we knit making 2 increments in each row.Do not forget to shift the increase on the increase in the previous series.We knit, until the height of the bell is about 6-7 cm. We knittightly, so that the bell holds the shape well.
2. After completing knitting, we make a binding of yarns of a different color. Smartly andWinter will turn out if you tie a textured yarn. I Knitted Yarn Alizesofty (100% micro-polyester) in two strands. The same yarn, but in the same thread,performed a chain stitch with a hook, along the coat-bell

Sewing the head to the body

We knit the legsWe knit a chain of air loops of the required length. We mess on itrow of connecting bars.
For the upper legs we knit two blanks. For the lower – one long.

We knit mittens
Mittens I knitted, also, from yarn Alize fine, but yellow.
1. We knit 6 columns without a crochet in an amigurumi ring.
2. In the second row, make 3-4 increments.
3. Then we knit without adding to the required length of mittens.
4. We put on the mittens on the paws and sew.

Knit boots
Valenochka well knit from some fluffy yarn.I knitted from Alize real 40 Angora in two strands.
1. The sole is knitted with columns without a crochet according to the scheme of the oval. I did not becomegive a diagram here. If you have never knitted an oval, then lookon the Internet – schemes and moooooooo much!I started knitting with a chain of 6 air loops, plus a lifting loop.Up to the size necessary to me the sole, it was required to connect one row. Forso that the toe sock was wider than the heel, I began to knit the second row by makingthree increases from the side of the sock (see photo)

2. Then knit without adding / removing to the end of the row.
3. Next, we knit by doing 3 adjustments in a row. Losses are done in a row and only withthe sides of the sock.
Should get such a bast. The size of the hole “bast”, we doyour taste. The main thing is that the paw of the monkey crawls into it.

4. We knit the bootleg (it is called a valenka so?). In the first row, withhand heel, do 1 reduction.
5. Then we knit without any deductions.
6. In the last row, on the side of the sock, make 1-2 increments.Complete the knitting with a connecting post. “Ponytail” leavemore authentic. They then sew the felt boots to the ape’s paw.In socks boots, put on a small lump of filler.

Sew the upper legs to the body of the monkey.She is already lustily looking at her future legs in boots

We put the lower legs into the body-bell and sew.

We knit a hat and scarfFor the scarf, tie a string of air loops of the correct length.Spray several rows with columns without crochet, to the desired widthscarf.I tied a scarf from Alize real 40 Angora yarn into one thread, Bosnianknitting.Bosnian knitting is knitting by connecting posts.I knitted each row only for the back half loop. It turns out the canvassimilar to knitting.Since the canvas with Bosnian knitting is very dense,it is better to take a thick hook. Then the scarf will turn out to be soft. Another onemoment – with knitting by connecting bars, at the beginning of eachrow, the lifting loop is also made.We knit a cap like a bell-bellied body. Only in each rowwe do not for 2, but for 1 increase. We knit until the cap becomescrawl over the head of a monkeyMake pompomchik not be difficult. Then it can be sewn ortie caps to the top of the head.

We dress our monkey.Here such a ridiculous thing turned out!

Doing a hairdoAt the previous monkey, on the head a hat. It is sewn and therefore
I did not make a head of hair.If you want, you can make our monkeys hairstyles.
1. Prepare the pieces of yarn (photo A). It is better to take yarn, which will be easyto dissolve into separate threads and to comb. The pieces are made more authentic, withreserve. Then you can cut everything.
2. We introduce a hook under the column on the head of the monkey (photo B).
3. Cut a piece of yarn in half. Patch and pull (photoAT).Through the resulting loop stretch the “tail” and tighten (photo D).

In this way we tie the whole apex of the monkey.Trimming. We spin the yarn with a needle and brush it with a brush.Again we equate.

Here is a chub turned out at this monkey-patsanchika 🙂

And this modest woman with a tail on the vertex, warmed with a knitted bandage.
Bandage:
1. We knit a chain of air loops along the width of the bandage.
2. We knit the stitches without the crochet, until the bandage becomes the desired length.We knit only for the back half loop – we will get an elastic band.
3. Sew the ends of the bandage and dress on the head of the monkey.I powdered my monkeys with a snowball.
For this, on a semi-dry brushhas collected undiluted white acrylic paint. Surplus removed, pokingnapkin and tinted monkeys. It became quite winte

it’s already a monkey from warm countries. She also has a ponytail on the vertex.
AND the dressing is not for warmth, but for beauty.Here the bandage is two chains of airy loops decorated with beads.And, by the way, about the tail. Not only that on the vertex, but the fact that the pope.The ponytail can also be knitted as knit paws and sewed on the relyinghis place

Amigurumi Cute Monkey Free Pattern

Muzzle (beige color)
1 row to dial a chain of 14 EAP, to Knit 12 PRS, in CL. St 3 PRS, 11 PRS, 1 raise (28)
2 row 1 raise, 11 PRS, 3 raises, 11 PRS, 2 raises (34)
3 row 1 PRS, increase, 11 PRs, (1 PRS, 1 raise)-3 times, 11 PRS (1 PRS, 1 raise)-2 times (40)
4 Row 2 PRS, raise. 11 PRs, (2 PRS, 1 raise)-3 times, 11 PRs (2 PRS, 1 raise)-2 times (46)
5 Row 3 PRS, increase, 11 PRs, (3 PRS, 1 raise)-3 times, 11 PRS (3 PRS, 1 raise)-2 times (52)
6 Row-8 row of PRS in each column (52)
9 Row 1 Decrease, 22 PRS, 1 decrease, 26 PRS (50)
10 row PRS in each column (50)
11 row 1 Decrease, 22 PRS, 1 decrease, 24 prs (48)
12 Row * 6 PRS, 1 decrease * Repeat 6 times (42)
13 Row * 5 PRS, 1 decrease * Repeat 6 times (36)
14 Row * 4 PRS, 1 decrease * Repeat 6 times (30)
15 row * 3 PRS, 1 decrease * Repeat 6 times (24)
16 Row * 2 PRS, 1 decrease * Repeat 6 times (18)
Fasten the thread, leave the end for sewing. Stuff.

Head (Brown)
1 Row 2 VP, 6 PRS in 2 loop from hook
2 Row 6 Additions (12)
3 Row * 1 PRS, 1 raise *, repeat once (18)
4 Row * 2 PRS, 1 raise *, repeat once (24)
5 Row * 3 PRS, 1 raise *, repeat once (30)
6 row * 4 PRS, 1 raise *, repeat once (36)
7 Row * 5 PRS, 1 raise *, repeat once (42)
8 Row * 6 PRS, 1 raise *, repeat once (48)
9 Row – 15 row of PRS in each column (48)
16 Row * 6 PRS, 1 decrease *, repeat 6 times (42)
17 Row * 5 PRS, 1 decrease *, repeat 6 times (36)
18 Row * 4 PRS, 1 decrease *, repeat 6 times (30)
19 Row * 3 PRS, 1 decrease *, repeat 6 times (24) beat)
20 row of PRS in each column (24)
21 Row * 2 PRS, 1 decrease *, repeat 6 times (18)
22 Row * 1 PRS, 1 decrease *, repeat 6 times (12)
23 Row 6 decreases, hole pull
Fasten the thread, leave for sewing.

Podglaznik (beige color)
1 row dial A chain of 6 EAP, to Knit 4 PRS, in St. PRS 3, 3 PRS 1 raise (12)
2 row 1 raise, 3 PRS, 3 raises, PRS, 2 raises (18)
3 Series 1 PRS, increase, 3 PRS, (1 PRS, 1 increase)-3 times, 3 PRS (1 PRS, 1 raise)-2 times (24)
4 Row 2 PRS, raise, 3 PRS, (2 PRS, 1 raise)-3 times, 3 PRS (2 PRS, 1 raise)-2 times (30)
Sew Podglaznik and on its bottom row nachichaem to sew the beginning of a muzzle.

Eyelid (beige color)
Dial 25 vp and knit 2 rows of Sat sew edges and sew over Podglaznikom.
Attention, the number of loops you can have a little different, attach a chain of the EAP to your Golovushke and try it, and there or add or turn.

Nose (Brown)
1 Row 2 VP, 6 PRS in 2 loop from hook
2 Row 6 Additions (12)
3 Row * 1 PRS, 1 raise *, repeat once (18)
Fold in half and grab a couple of stitches.
Fasten the thread, leave for sewing, sew to the muzzle.

Teeth.
White.
Dial a chain of 25 EAP, starting with the second loop to knit SS, PRs, PRSPs, 19ssn, PRSPs, PRS, SS thread fasten, leave for sewing. Sew it up.
Take a thread floss or any other thinner, embroider teeth and muzzle.
Lower lip (beige color)
Dial a chain of 27 EAP and knit 2 rows of PRs to sew the edges and sew under the teeth.
Attention, the number of loops you can have a little different, attach a chain of the EAP to your teeth and try it, and there, or add or turn.
Upper lip (beige color)
Dial 24 vp and sew over the upper lip.
Attention, the number of loops you can have a little different, attach a chain of the EAP to your teeth and try it, and there, or add or turn.

Ears (beige) (2 pcs)
1 Row 2 VP, 6 PRS in 2 loop from hook
2 Row 6 Additions (12)
3 Row * 1 PRS, 1 raise *, repeat once (18)
4 Row * 2 PRS, 1 raise *, repeat once (24)

Brown (2 pcs)
1 Row 2 VP, 6 PRS in 2 loop from hook
2 Row 6 Additions (12)
3 Row * 1 PRS, 1 raise *, repeat once (18)
4 Row * 2 PRS, 1 raise *, repeat once (24)
Fold together and tie on a circle of brown thread for both arcs of each color.
Fasten the thread, leave for sewing.
Eyes cut from felt.
Attention, the head and all face knit crochet № 2, and the body and paws knit Hook № 2.5, so if you have a little more hooks, it is better to change, if not, then knit is not quite tight and tight to get the right proportion.

Taurus (Brown)
1 Row 2 VP, 6 PRS in 2 loop from hook
2 Row 6 Additions (12)
3 Row * 1 PRS, 1 raise *, repeat once (18)
4 Row * 2 PRS, 1 raise *, repeat once (24)
5 Row * 3 PRS, 1 raise *, repeat once (30)
6 row * 4 PRS, 1 raise *, repeat once (36)
7 Row * 5 PRS, 1 raise *, repeat once (42)
8 Row * 6 PRS, 1 raise *, repeat once (48)
9 Row * 7 PRS, 1 raise *, repeat once (54)
10 -13 row of PRS in each column (54)
changing color.
14 row of PRS in each column (54)
15 row PRS in each column behind the back Wall (54)
16 Row * 7 PRS, 1 decrease *, repeat 6 times (48)
17 Row-18 row of PRS in each column (48)
19 Row * 6 PRS, 1 decrease *, repeat 6 times (42)
20 row of PRS in each column (42)
21 Row * 5 PRS, 1 decrease *, repeat 6 times (36)
22 – 25 row of PRS in each column (36)
26 Row * 4 PRS, 1 decrease *, repeat 6 times (30)
27 row of PRS in each column (30)
28 Row * 3 PRS, 1 decrease *, repeat 6 times (24) beat
29 Row * 2 PRS, 1 decrease *, repeat 6 times (18)
30-31 row of PRS in each column (18)
32 Series * 1 PRS, 1 decrease *, repeat 6 times (12)
33 Series B decreases, hole pull out thread hideAttach the thread to the 15th row and tie a row of PRs to the front wall of the hinge.

Hands (beige color)
1 Row 2 VP, 6 PRS in 2 loop from hook
2 Row 6 Additions (12)
3 Row * 1 PRS, 1 raise *, repeat once (18)
4 Row * 2 PRS, 1 raise *, repeat once (24)
5-6 row of PRS in each column (24)
7 Row * 2 PRS, 1 decrease *, repeat 6 times (18)
8 row of PRS in each column (18)
9 row * 1 PRS, 1 decrease *, repeat 6 times (12)
10 row of PRS in each column (12)
Just a little bit of palm. If desired, you can insert the wire into the handle.
Grab the palm through a couple of stitches to make the filler no longer fall into the palm.
Change to brown thread.
11 row of PRS in each column (12)
12 Row * 1 PRS, 1 raise *, repeat 6 times (18)
13 – 22 row of PRS in each column (18)
Change the thread to color.
23 row of PRS in each column (18)
24 row PRs behind the back wall (18)
25-27 row of PRS in each column (18) to beat
28 Row * 1 PRS, 1 decrease *, repeat 6 times (12)
29 Row 6 decreases, a hole to pull, a thread to refill.
Attach the thread to the 26th row and tie the PRS grasping the front wall.

Finger
1 row 2VP, 5 prs in 2 loop from Hook (5)
2 Row 5 prs, fasten the thread, leave for sewing.
Sew a finger on the palm. Sew the fingers on the palm.

Sneakers (white thread)
1 Row 6 VP, 1 PRS in the second loop from the hook, 3 PRS, 3 PRS in one loop, 3 PRS, 3 PRS in one loop (13)
2 row 4 PRS, raise-3 times, 4 PRS, Raise-3 times (19)
3 Row 4 PRs, (raise, PRS)-3 times, 4 PRS, (increase, PRS)-3 times (25)
4 Row 4 PRS, (increase, 2 PRS)-3 times, 4 PRS (raise, 2 PRS)-3 times (31)
5 row 4 PRS, (increase, 3 PRS)-3 times, 4 PRS (raise, 3 PRS)-3 times (37)
6 row 4 PRs, (raise, 4 PRS)-3 times, 4 PRS (increase, 4 PRS)-3 times (43)
7 Row 4 PRS, (increase, 5 PRS)-3 times, 4 PRS (raise, 5 PRS)-3 times (49)
8 Row 49 PRs in a circle behind the back wall (49)
9 -10 row of PRS in each column (49)
changing color.
11-12 row of PRS in each column (49)
13 row 19 PRs, decrease, 14 prs, decrease, 12 PRS (47)
14 Row (2 PRS, decrease)-7 times, 6 PRS, decrease, 9 prs, decrease (38)
15 row 10 decreases, 18 PRs (28)
16 row (1 PRS, 1 decrease)-4 times, 16 PRs (24)
17 Row 7 PRS, Pribvka, VP, turn (this is knitting the reed straight-back rows)
18 Row 8 PRs, raise, VP, turn
19 Row 9 PRs, raise, VP, turn
20 Row 10 PRs, raise, VP, rotate
21 Row 11 PRs, raise, fix the thread, hide.
Make a white thread lace.

Foot (Brown)
1 Row 2 VP, 6 PRS in 2 loop from hook
2 Row 6 Additions (12)
3 Row * 1 PRS, 1 raise *, repeat once (18)
4 Row * 2 PRS, 1 raise *, repeat once (24)
5-19 row of PRS in each column (24)
Fasten the thread. Sew Foot in the cud.

Tail (Brown)
1 Row 2 VP, 6 PRS in 2 loop from hook
2 Row 6 Additions (12)
3 Row * 1 PRS, 1 raise *, repeat once (18)
4 – 7 row of PRS in each column (18)
8 Row * 4 PRS, 1 decrease *, repeat 3 times (15)
9 -11 row of PRS in each column (15)
12 row 1 Decrease, PRS to the end of the row (14)
13-15 row of PRS in each column (14)
16 row 1 Decrease, PRS to the end of the row (13)
17 -19 row of PRS in each column (13)
20 row 1 Decrease, PRS to the end of the row (12)
21 -23 row of PRS in each column (12)
24 series decrease, PRS to the end of the row (11)
25 -26 row of PRS in each column (11)
27 series decrease, PRS to the end of the row (10)
28 row PRS in each column (10) Insert the wire, fill.
29 series decrease, PRS to the end of the row (9)
30 row of PRS in each column (9)
Fasten the thread, tail sew. Bend to your liking.

Banana (Yellow thread)
1 Row 2 VP, 5 PRS in 2 loop from hook
2 Row 5 Additions (10)
3 Row * 1SBN, 1 raise * repeat 5 times (15)
4 – 5 row of PRS in each column (15)
6 row * 4 PRS, 1 raise * repeat 3 times (18)
7 – 13 row of PRS in each column (18)
14 row of PRS in each column behind the back wall (18)
Changing the color to white.
15 – 17 row of PRS in each column (18)
18 Row * 4 PRS, 1 decrease * Repeat 3 times (15)
19-20 row of PRS in each column (15)
21 Row * 1SBN, 1 decrease * Repeat 5 times (10) beat.
22 Row 5 decreases.
Pull the hole, hide the thread.
Attach the yellow thread to the 14th row and on each 6 loops tie (straight rows) 3 times.
1 row – 4 row of PRS in each column (6)
5 row 1 Decrease, PRS to the end of the row (5)
6 row of PRS in each column (5)
7 row 1 Decrease, PRS to the end of the row (4)
8 row 1 Decrease, PRS to the end of the row (3)
9 row 1 Decrease, PRS to the end of the row (2)
Fix the thread, hide it.

Cap (Blue Thread)
1 Row 2 VP, 6 PRS in 2 loop from hook
2 Row 6 Additions (12)
3 Row * 1 PRS, 1 raise *, repeat once (18)
4 Row * 2 PRS, 1 raise *, repeat once (24)
5 Row * 3 PRS, 1 raise *, repeat once (30)
6 row * 4 PRS, 1 raise *, repeat once (36)
Folded in half. The main part.
1 Row 2 VP, 6 PRS in 2 loop from hook
2 Row 6 Additions (12)
3 Row * 1 PRS, 1 raise *, repeat once (18)
4 Row * 2 PRS, 1 raise *, repeat once (24)
5 Row * 3 PRS, 1 raise *, repeat once (30)
6 row * 4 PRS, 1 raise *, repeat once (36)

Materials: Hook № 3, yarn: Light pink, dark pink, red, yellow, white and blue. Holfayber for filling the height of the monkey-12.5 cm

Amigurumi Small Monkey Free Pattern

Body and Head
Row 1: blue color. VP 2, 6 in the second chain (net) off the hook. (6)
Row 2: (d) х6. (12)
Row 3: (1 SBN, D) х6. (18)
Row 4: (2 SBN, D) X6. (24)
Number 5-9:24 Row 10: (2 SBN, UB) x6. (18)
Number 11:18 Row 12: (1 SBN, UB) х6. (12)
Number 13:12 Number 14: (d) х12. (24)
Number 15: (1 SBN, D) X12. (36)
Series 16: (2 SBN, D) х12. (48)
Number 17-19:48
Number 20: (6 SBN, UB) х6. (42)
Number 21: (5 SBN, UB) х6. (36)
Number 22: (10 SBN, UB) х3. (33)
Number 23: (9 SBN, UB) х3. (30)
Number 24-25:30
Row 26: (3SBN, UB) х6. (24)
Number 27: (2SBN, UB) х6. (18)
Number 28: (1SBN, UB) х6. (12)
Number 29: (UB) х6. (6)
Series 30: Work in the ranks 
For Crown Hair: 4 v. P, in the 2nd VP of the Hook, sat in the next 2 VP, sat in the next junction of the column, 6 v. P, in the 2nd C. Sweat hook, in the next 4 v. P, in the next connection of the column, 3 v. P, in the 2nd C. Sweat hook , in the next v. N, in the next junction of the column, SS connection of the column in the next junction of the column. Anchoring.
Tummy: Work in the ranks.
Row 1: Dial 5 v. P, the 2nd VP from the Hook, sat on in the next 3 v. N, turn (4)
Series 2: v. P, 4 Snr, turn.
Row 3: VP, 2 SBN in the first loop, 2 SBN, 2 in the last loop, turn (6)
Series 4-6: v. P, 6 SBN, turn.
Row 7: VP 1, UB, 2 SBN, UB. Leave the long end in order to sew. (4)
Tummy Sew 5-12 body ranks.

Legs (2 pcs)
Row 1: Red, 4 VP, 1 in 2nd of the hook, 1 in the next VP, 3 in the subsequent VP; Knit on the other side of the chain, 1 SBN in the next VP, 2 SBN in the next VP (8)
Series 2: Ave, 1 SBN, (d) х3, 1 SBN, (d) х2. (14)
Number 3:14
Number 4:3 SBN, (1 SBN, UB) х4, 3. (10)
Number 5:2, (1 SBN, UB) х3, 2 SBN. (7)
Number 6:7 Change to Blue on the last 2 loops of the last junction of the column
Series 7: Knit behind the rear walls.
Number 8-10:7 SBN.
Row 11: We are slakered in half and we are pressed on the 5th row of the body.

Tail not stuffing
Row 1: Yellow, 2 VP, 4 in the 2nd C. Sweat Hook. (4)
Number 2-6:4
Row 7: Knit in a circle, change the blue bloom in the last two loops of the last junction of the column
Series 8:-164.
Row 17: In half and knit.
In the 5th row of the body, the hand (2 pieces) is not filled with the
Number 1: blue color, 2v. P., 6, 2nd C. pot hook. (6)
Number 2-11:6
Row 12: SBK around, change to light pink in the last two loops of the last junction of the column
Range 13:6 SBN.
Row 14-for thumb-2sbb in the 1st loop, skip 4 loops, 2 on the trail loop. Connect the 1st loop. Fasten the row 14 for the hand-light-rose yarn to attach a free loop in the 13th row, 1VP, 2SBB in the same loop, 3 Prib = 8
Series 15:8
Number 16: UB in a circle. Sew to the body.

Eyes (2 pcs)
Row 1: Light pink, 2 VP, 6 down to 2nd off hook. (6)
Row 2: (d) х6. (12)
Fasten the Connect as shown in the picture.
Attach them on 20-24 to a row of the head and sew the

Muzzle
Row 1: Light pink color, 12 VP, 1 per second from the hook, 9 SBN, 3 down the next VP; Knit on the other side of the chain, 9 SBN, 2 SBN in the next VP (24)
Row 2: OL, 9 SBN, (d) х3, 9 SBN, (d) X2. (30)
Number 3-4:30
Row 5: Down and connect the SS with a column.
Sew on 15-19 rows of the head, fill.

Eyes (2 pcs): White, 2 v. P, 6 s2u from the hook. (6)
Fasten.

Ear (knit on 2 each color (dark pink and Blue):
A series of 1:2 V.P., 6 SBN 2 from the hook (6)
Connect the two ears (pink and blue), and tie the
Blue Thread: v. P, 1 SBN, D, (1SBN, D) х2. (9) Finish Sew your eyes on the face, black thread, and above your nostrils and mouth. Sew your ears on the 21st row. That’s all. The monkey, which will connect and the novice knitter, is ready. Description found on the Internet. Cute gift or toy for your beloved baby. Though why the kid-monkey crochet will love both adults, and schoolgirls, and students. As a gift for Valentine’s Day in general will not be equal. Make a symbol like a heart or something suitable for the occasion and everything is in the open. The author of the Monkey is still unknown. We will be grateful if it will be announced. Together with our enthusiasm and spassiami.

Legend:
sb – column without crochet
pcc – half-shell with crochet

Amigurumi Purple Monkey Free Pattern

Head
Light thread
1. A chain of 8 in the second loop, the second loop of 2sbn, then one after another in each loop of the chain, in the last 4 cd, we knit in a circle, without turning in the opposite direction, then 1 cb in each loop of the chain, in the last 2 sbn = 18 sc.
2. The addition of x2, 1xxx5, the increase in x4, 1xxx5, the increase x2 = 26sb.
3 – 4. 26 sb.
5. 1 sb x2, 2 psn x9, 1 sb x15 = 35
6. 1 сбн х2, (an increase from 2 пссн, 1 пссн) х9, 1 сбн х15 = 44
Brown thread
7 – 12. 44 sb, 7 row knit behind the back wall
13. (20 сбн, убавка) х2 = 42 сбн
14. (5 sb, reduction) x6 = 36 sbn
Start stuffing with filler
15. (4 sb, reduction) х6 = 30 сбн
16. (3 scales, decrease) х6 = 24 сбн
17. (2 sb, reduction) x6 = 18 sbn
18. (1 сбн, убавка) х6 = 12 сбн
Complete packing
19. Decrease x6 = 6, remove all loops with a thread of a different color, darker than the muzzle itself, behind the front thread of the 7th row of sbn – 44sbn.

Ears
Light beige thread
1. 6 sb in the ring amigurumi
2. 12 sbn
3. (increase, 1 sbn) х6 = 18 сбн
4. (increase, 2 sc) x6 = 24 sbn
5. (increase, 3 scales) х6 = 30 сбн
Brown thread
6. Connecting stems in a circle = 30ss

Pens
Light thread
1. 6 sb in the ring amigurumi
2. Addition x6 = 12 sbn
3. 12 sbn
Brown thread
4. Decrease in x3, 1 sbn x6 = 9 sb
5. 1 сбн, the increase, 1 сбн х7 = 10 сбн
6 – 17. 10 sbn
18. decrease x5 = 5 sbn
Fill with filler
19. all the loops pull together

Feet
Light thread
1. 8 th, 2 nd in 3 sb, 1 sb in the next 4 loop of the chain, 3 sb in the last sling of the chain, turn in a circle 1 sb in 4 loops = 14 sb
2. Addition x3, 4 sb, increase x3, 4 sbn = 20 sb
3. 20 sbn
Brown thread
4. 20 sbn
5. Decrease in x3, 1 sbn x14 = 17 sbn
6. 3 sb to tie together, 1 sbn x6, decrease, 1 sbn x6 = 14 sb
7. Addition, 1 сбн х6, increase, 1 сбн х6 = 16 сбн
8 – 9. 16 sbn
10. (decrease, 1 sbn) x5, 1 sbn = 11 sbn
11. The reduction of x5, 1 sbn = 6 sbn
Fill with filler
12. Tie off the hinges.

Torso
1. 6 sb in the ring amigurumi
2. Addition x6 = 12 sbn
3. (increase, 1 sbn) х6 = 18 сбн
4. 18 sbn
5. (increase, 2 sc) x6 = 24 sbn
6. 24 sbn
7. (increase, 3 scales) х6 = 30 сбн
8. 30 sbn
9. (an increase, 4 sbn) х6 = 36 сбн
10 – 15. 36 sbn
16. (reduction, 4 scf) x6 = 30 sbn
17. 30 sbn
18. (reduction, 3 scf) x6 = 24 sbn
19. (reduction, 2 scf) x6 = 18 sbn
20. (reduction, 1 sbn) х6 = 12 сбн
21. The reduction x6 = 6 sbn
22. all the loops pull together