Add a sprinkle of holiday cuteness to your décor with this charming Amigurumi Santa Kitty Ornament! With her round white head, tiny limbs, and a delightful Santa outfit, she’s ready to brighten up your holiday season.

Project Details

Skill Level: Beginner to Intermediate

Finished Size: Approximately 10–12 cm tall

Materials

• DK yarn: White, Red, Yellow, Brown or Dark Grey
• 2.5–3.0 mm crochet hook
• 6–8 mm safety eyes
• Jute twine for hanging
• Polyester stuffing
• Yarn needle
• Scissors

Abbreviations

• MR – magic ring
• sc – single crochet
• inc – increase
• dec – decrease
• sl st – slip stitch
• ch – chain
• FLO – front loop only
• BLO – back loop only
• hdc – half double crochet

Head

R1: MR, 6 sc (6)

R2: inc x6 (12)

R3: (1 sc, inc) x6 (18)

R4: (2 sc, inc) x6 (24)

R5: (3 sc, inc) x6 (30)

R6: (4 sc, inc) x6 (36)

R7: sc around (36)

R8: sc around (36)

R9: sc around (36)

R10: sc around (36)

R11: sc around (36)

Place safety eyes between R7 and R8, 8 stitches apart.

Add a small embroidered yellow oval nose centered between the eyes.

R12: (4 sc, dec) x6 (30)

R13: (3 sc, dec) x6 (24)

R14: (2 sc, dec) x6 (18)

Stuff firmly.

R15: (1 sc, dec) x6 (12)

R16: dec x6 (6)

FO and weave closed.

Embroider 3 whiskers on each side:

• one at eye level
• one two rounds above
• one two rounds below

Santa Hat

Hat Cone

R1: MR, 6 sc (6)

R2: (1 sc, inc) x3 (9)

R3: sc around (9)

R4: (2 sc, inc) x3 (12)

R5: sc around (12)

R6: (3 sc, inc) x3 (15)

R7: sc around (15)

R8: (4 sc, inc) x3 (18)

R9-10: sc around (18)

R11: (5 sc, inc) x3 (21)

R12-13: sc around (21)

Do not close the hat; fold slightly for soft drape.

Hat Brim

Attach white yarn.

R1: sc around (21)

R2: hdc in 3rd loop only around (creates the twisted rope-like raised band)

FO, leaving tail for sewing.

Pom-Pom

Make a very small pom-pom or crochet:

R1: MR, 6 sc (6)

R2: inc x6 (12)

R3: sc around (12)

R4: dec x6 (6)

Stuff lightly, FO, and sew to tip of hat.

Body (Dress)

R1: MR, 6 sc (6)

R2: inc x6 (12)

R3: (1 sc, inc) x6 (18)

R4-6: sc around (18)

R7: (2 sc, inc) x6 (24)

R8-10: sc around (24)

R11: (3 sc, inc) x6 (30)

R12-14: sc around (30)

Dress Hem

R15: FLO hdc tightly around (30)

FO and stuff body firmly.

Sew head centered on top.

Arms (Make 2)

R1: MR, 6 sc (6)

R2-6: sc around (6)

Light stuffing only in the round end.

FO.

Sew arms slightly forward-facing at upper body sides.

Legs (Make 2)

R1: MR, 6 sc (6)

R2: inc x6 (12)

R3-4: sc around (12)

R5: (2 sc, dec) x3 (9)

R6-7: sc around (9)

Stuff firmly.

FO and sew slightly apart at the bottom of dress, aligned front-facing.

Assembly

Attach legs to lower body so they hang down freely.

Attach arms just below neckline.

Secure hat firmly to head with a slight forward tilt.

Add whiskers and final facial shaping.

Adjust hanging loop so kitty hangs centered and upright.

Final Notes

Your Santa Kitty ornament is now ready to brighten the Christmas tree with its soft charm, plump shapes, warm colors, and cozy handmade personality. Hang it proudly or make a whole family of festive kitties to decorate your holiday season.

Copyright Notice

Copyright © 2023 amigurumi.badoomobile.net. All rights reserved.

Pattern created for amigurumi.badoomobile.net

Finished Kitty Amigurumi – Color Variations and Accessories

Abbreviations:
R = row
mc = magic circle
ch = chain
sc = single crochet
DC = double crochet
inc = 2 sc in the next stitch
dec = single crochet 2 stitches together
sl st = slip stitch
F.o. = finish off
BLO = back loop only
FLO = front loop only
(12) = number of stitches you should have at the end of the round/row
( ) x 6 = repeat whatever is between the brackets the number of times stated

Sorry, there is no information about type of yarn and hook size.

Amigurumi Sweet Kitty Free Pattern

Head
With beige colour:
R 1: 6 sc in mc (6)
R 2: 6 inc (12)
R 3: (1 sc, inc) x 6 (18)
R 4: (2 sc, inc) x 6 (24)
5: (3 sc, inc) x 6 (30)
6: (4 sc, inc) x 6 (36)
7: (5 sc, inc) x 6 (42)
8-14: 42 sc (7 rows)
15: (5 sc, dec) x 6 (36)
16: (4 sc, dec) x 6 (30)
17: (3 sc, dec) x 6 (24)
18: (2 sc, dec) х 6 (18)
Stuff firmly.
19: (1 sc, dec) x 6 (12)
F.o.

Muzzle
With light-beige colour:
R 1: 6 sc in mc (6)
R 2: 6 inc (12)
F.o., leaving a long tail.

Ears (make 2)
With beige colour:
R 1: 6 sc in mc (6)
R 2: (1 sc, inc) х 3 (9)
R 3: 9 sc
Fold top of ear flat and sc through both sides across.
F.o., leaving a long tail.

Body
With beige colour:
R 1: 6 sc in mc (6)
R 2: 6 inc (12)
R 3: (1 sc, inc) x 6 (18)
R 4: (2 sc, inc) x 6 (24)
R 5: (3 sc, inc) x 6 (30)
R 6: (4 sc, inc) x 6 (36)
R 7-10: 36 sc (4 rows)
With pink colour:
R 11: 36 sc
R 12: BLO 36 sc
R 13: 36 sc
R 14: (4 sc, dec) x 6 (30)
R 15-16: 30 sc (2 rows)
R 17: (3 sc, dec) x 6 (24)
R 18-19: 24 sc (2 rows)
R 20: (2 sc, dec) x 6 (18)
Stuff firmly.
F.o., leaving a long tail.

Skirt
Go to the R12.
With pink colour:
R 1: FLO: 1 ch, inc in every st and continue to the end of row, sl st in last st (72)
R 2-6: 1 ch, sc in every st and continue to the end of row, sl st in last st (72)
R 7: 1 ch, 2 sl st, (sc, DC, sc in next st; 2 sl st) x repeat to the end of row.
F.o.

Arms (make 2)
With beige colour:
R 1: 6 sc in mc (6)
R 2: (1 sc, inc) х 3 (9)
R 3-5: 9 sc (3 rows)
With pink colour:
R 6-15: 9 sc (10 rows)
Stuff till R 12.
Fold top of arm flat and sc through both sides across.
F.o., leaving a long tail.

Legs (make 2)
With pink colour:
R 1: 6 sc in mc (6)
R 2: 6 inc (12)
R 3: (1 sc, inc) х 6 (18)
R 4: BLO 18 sc
R 5-6: 18 sc (2 rows)
R 7: 3 sc, 6 dec, 3 sc (12)
With beige colour:
R 8: BLO 12 sc
R 9-18: 12 sc (10 rows)
R 19: 6 dec (6)
Stuff. F.o.

View video tutorial how to attach jointed legs using buttons.
https://www.youtube.com/embed/nLYltxUflqg?rel=0

From the author: for any copying of material, publication in the community, etc. Be sure to specify the author with a link to the source. You can not translate or change the MK and distribute under your name. You can give, sell ready-made toys, and I will be very grateful for the instruction of the author of the MC. 
The difficulty level is easy, but some experience is needed. 
When using these materials, the toy turns out to be about 16 cm. 

Materials 
– Nako Paris yarn (you can also knit from plush yarn); 
– hook number 2.5; 
– eyes D 4 mm; 
– yarn for embroidery noses and whiskers; 
– a filler for toys;
– needle for stitching and embroidery. 

Legend 
ka – ring amigurumi; 
VP – air loop; 
SBN – single crochet; 
pr – increase; 
kil – down; 
ss – connecting stub. 

Amigurumi Cute Plush Kitty Free Pattern

Head, body, legs 
The head, body and legs are knitted in one piece. Knit from the head. 
1. 7 sbn ka 
2. 7 pr = 14 
3. (sbn, pr) * 7 = 21 
4. (2sbn, pr) * 7 = 28 
5. (3sbn, pr) * 7 = 35 
6. (4sbn pr) * 7 = 42 
7. (6sbn, pr) * 6 = 48 
8-12 = 48 (5 rows) 
13. (6sbn, kill) * 6 = 42 
14 = 42 
15. (5sbn, kill) * 6 = 36 
16. (4sbn, ub) * 6 = 30 
17. (3sbn, ub) * 6 = 24 
18. (2sbn, ub) * 6 = 18
19 = 18 cc. 
We stuff our head and start to knit the body. 
20. (2sbn, pr) * 6 = 24 
21 = 24 
22. (3sbn, pr) * 6 = 30 
23 = 30 
24. (4sbn, pr) * 6 = 36 
25 = 36 
26. (5sbn, pr) * 6 = 42 
27 – 35 = 42 (8 rows) 
36. (5sbn, ub) * 6 = 36 
37 = 36 
38. (4sbn, ub) * 6 = 30 
39 – 41 = 30 
Stuff the body and knit the legs. Knit the first leg. 
42. 12 sbn, then tying 13 loop to the first one, where the marker is, this will be the beginning of the series. 
43 – 49 = 12 (7 rows) We 
fasten and cut the thread, leaving about 15 cm to tighten the hole.
Go to the second leg. We retreat from the first 3 loops and knit as the first leg (12 knits each, total 8 rows). We stuff the legs and body. After the body is sewn up the hole between the legs. 

Handles (2 parts) 
1. 6 CbA in ka 
2. 6 Ave = 12 
3 – 5 = 12 
6. 2 kills, 8 kbs = 10 
7 = 10 
8. kills, 8 cbs = 9 
9 – 15 = 9 (7 rows ) 
Fasten the thread, cut leaving about 15 cm. Fill the handle, tighten the hole. 

Ears (2 parts) 
1. 5 sbn in ka 
2. 5 pr = 10 
3. pr, 4 sbn, pr, 4 sbn = 12 
4 = 12
The eyelet should be folded in half and knit 6 sbn. 

Tail 
1. 4 sbn ka 
2. 4 pr = 8 
3 – 14 = 8 (12 rows)
Tail folded in half and knit 4 sbn. 
Sew ears, legs, tail. Attach eyes, embroider nose and mustache. 
That’s all. The cat is ready 🙂

MATERIALS NEEDED for knitting a cat:
– ALIZE COTTON GOLD yarn (blue No. 40 or No. 350, dairy No. 01, purple No. 616, green turquoise No. 610, a little light pink No. 371 for ears); 
– YarnArt JEANS yarn (hot pink No. 59, light yellow No. 004, a little red for the cheeks); 
– a yarn of Iris of light gray color for an edge of skates; 
– a bit of white cotton for ruching; 
– lace, sequins, beads, anything you like to decorate clothes; 
– hook No. 2.00 mm, 1.00 mm; 
– stocking spokes 2.5 mm 
– filler; 
– black beads for eyes of 5 mm or any other, to-rye you have; 
– nose screw or any other; 
– a piece of white and red felt; 
– some glue; 
– a small piece of fine wire for the tail (according to your desire)

LEGEND: 
SBN – a column without nakida 
PRE – increase (two SBN in one loop) 
UB – subtraction (two Sc: knit together) 
CCH – column with nakidy 
PSN – half-column with nakidy 
VP – air loop 
SS – connecting column 

Scheme of cat toys amigu on skates 

Amigurumi Kitten in Dress Free Pattern

Legs + Skates 

We start with a thread of bright pink color (or the one that you have planned), knit shoes: 
row 1: we collect a chain of 10 parts. + 1 vpp, in the 3rd loop from the hook 1 sbn, 7 sbn, 5 sbn in the last loop of the chain. We continue on the other side of the chain: 8 sbn, ss (21)
2 row: 2 VPPP, 1 psn, Pribb from psn, 6 psn, 2 Priba from psn, 2 psn, 2 Priba from pn, 6 psn, Prib from psn, 1 psn, ss (28) 
3 row: 1 VPP, 10 CABs, 2 PUBER from CAB, 5 PIB from Psn, 2 PIB, from UB, 10 UBN, SS (38) 
4 row: 38 UBN for the back loop 
5 row: 38 UBN for the back loop 
6 row : 38 UBN 
7th row: 10 UBN, (UB, 1 UBN) x6, 10 UBN (32) 
8 row: 12 UBN, (UB, 1 UBN) x2, UB, 12 UbN (29) 
9 row: 8 UBN, 6 UB, 9 sbn (23) 
10 row: 8 sbn, 3 UB, 9 sbn (20) 
11 row: 8 sbn, 2 UB, 8 sbn (18) 
12 row: 18 sbn 
We pack well shoes. !!
13 row: 18 sbn for the front walls of the loop (the sides of the shoes). Thread fasten, cut and hide.
Change the color of the thread on the milk !! 13 row: knit for the rear walls of the loop (4 sbn, UB) x3 (15) We look at the photo. 
14 row: 15 sbn 
Next we will alternate the threads every two rows. 
We stuff the leg in the course of knitting, but not tightly, gently. 
Change thread color to purple 
15-16 row: 15 sbn 
Change to dairy 
17-18 row: 15 sbn 
Violet 
19-20 row: 15 sbn 
Dairy 
21-22 row: 15 sbn 
Violet 
23-24 row: 15 sbn 
Dairy 
25-26 row: 15 sbn 
Violet 
27-28 row: 15 sbn 
Dairy 
29-30 row: 15 sbn 
Violet 
31-32 row: 15 sbn 
Dairy 
33-34 row: 15 sbn
Violet 
35-36 row: 15 sbn 
Milky 
37-38 row: 15 sbn 
Violet 
39-40 row: 15 sbn 
Dairy 
41-42 row: 15 sbn 
Violet 
43-45 row: 15 sbn 
Next we continue with violet thread 
46 row: (4 sbn , HAIR) x3 (18) 
47 row: 18 SbN 
48 row: (2 sbn, HAIR) x6 (24) 
When knitting the second leg, do not cut the thread! 

Blade for skates 

Yarn Iris light gray in color, hook № 
1.0mm Knit 2 parts with a length of 4 cm: 8 sbn in the ring amigurumi . And further in a circle. 

At the end of knitting, we make 4 UB, we tighten the hole. In the course of knitting we fill, but not tightly, so that our detail can be bent in the process of sewing.
We knit 4 short parts with a length of 0.5 cm (this is about 3 rows): 8 sbn in the spacecraft. 

At the end, we do not tighten the hole, we only fasten the thread, leaving a long end for sewing. Detail to stuff. 
Sew the parts together, and then sew to the leg, as in the photo. 
On the shoes do imitation laces. 

Connecting legs + torso 
Note:
After we connect the legs, a slight deformation will be noticeable, i.e. one leg will be slightly larger than the other. But when stuffing, this difference will go away. But if you are still very confused, then you can swap rows on legs 47 and 48, ie: row 47: (2 sbn, ARM) x6 (24), row 48: for the first leg 24 sbn, for the second 10 sat, i.e. we do not link this row to the end, but only to the middle of the inside of the leg. This can be done only on the second leg, it will not affect the appearance, and it will align the legs. 

We continue to knit purple thread. 
On the second leg, it connects 10 sbn to the middle of the inner side and makes 3 vp, we find the middle on the other leg and connect them to each other. Please note that my seam runs behind the torso, i.e. legs I heel to me. We continue to knit in a circle:
49 a row: 24 sbn on a leg + 3 sbn on a chain + 24 sbn on a leg + 3 sbn on a chain (54). We put a marker. 
50-55 row (6 rows): 54 sbn 
Change the color of the thread to green turquoise 
56 row: 54 cfn 
57 row: 54 sbn at the back loop 
Change the color of the thread to light yellow (blouse) 
58 row: 54 cfc 
59 row: 54 sat for a back loop 
60-67 a row (8 rows): 54 sbn 
We fill the lower part of a trunk. In the zone, so to speak, of the little girls, we don’t fill in much, because after 45 rows we sew the legs with stitches so that the toy can sit. 
68 row: (7 sbn, UB) x6 (48) 
69-70 row: 48 sbn 
71 row: (6 sbn, UB) x6 (42) 
72-73 row: 42 sbn 
74 row: (5 sbn, UB) x6 (36) 
75-76 Row: 36 Sat
77 row: (4 sbn, UB) x6 (30) 
Change the color of the thread to blue 
78 row: 30 sbn behind the rear walls of the loop 
78 row: behind the front walls of the loop with the same thread as the blouse (or any other) knit the collar: 10 sbn , 1 loop skip to the next. knit 5 CCH (in one loop), again skip the loop, 1 ss, 1 ss, skip the loop, 5 CCH (in one loop), skip the loop, 1 ss and continue on 10 ssn. To stitch the collar, sew it. 
79 row: 30 sbn 
80 row: (3 sbn, UB) x6 (24) 
81 row: 24 sbn Fill the 
item to the end, fasten the thread, cut and leave a long end for sewing. 

Head 

Knit with blue thread. Fill in the course of knitting. 
1 row: 6 sbn in the ring amigurumi (6)
2nd row: 6 ARR (12) 
3rd row: (1 sbn, ARR) x6 (18) 
4 rd: (2 srn, ARR) x6 (24) 
5 rd: (3 sr, ARR) x6 (30) 
6 rd : (4 sbn, Prib) x6 (36) 
7 row: (5 sbn, Prib) x6 (42) 
8-10 row: 42 sbn 
11 row: (6 sbn, Prib) x6 (48) 
12 row: 48 sbn 
13 row : (7 sat, Prib) x6 (54) 
14 tier: (8 cbn, Prib) x6 (60) 
15 tv: (9 sbn, Prib) x6 (66) 
16-21 td (6 rows): 66 sb 
Who screw nose, fasten it between the 16 and 17 rows. 
22 row: (9 sbn, UB) x6 (60) 
23 row: (8 sbn, UB) x6 (54) 
24 row: (7 sbn, UB) x6 (48) 
25 row: (6 sbn, UB) x6 ( 42) 
26 row: (5 sbn, UB) x6 (36) 
27 row: (4 sbn, UB) x6 (30)
28 row: (3 sbn, UB) x6 (24) Fasten the 
thread, cut, leave a long end for sewing. 
We sew the head to the body. 

Ears 

We knit 4 details: 2 – blue, 2 – pink. Filling is not necessary. 
Dial a chain of 10 vp We will continue to knit in turning rows. 
1 row: in the 2nd from the hook loop 9 sat 
2 row: 8 sat 
3 row: 7 sat 
4 row: 6 sat 
5 row: 5 sat 
6 row: 4 sat 
7 row: 3 sat 
8 row: 2 sat 
9 row: 1 cc 
Two parts are put together and we tied a blue thread together with two parts together, in the corners we make 3 connections. Sew ears to the head. Amigurumi

Cat face design 
Fasten the spout (I have between the 16th and 17th rows) and make up the mouth and the peephole (see photo). 

We make the first puncture in the area of ​​the mouth and draw the needle in the area of ​​the eye, make a small stitch and return the needle to the area of ​​the mouth again (the thread moves inside). And so we will repeat 2-3 times. Do the same with the other eye. 

We sew bead eyes, glue felt in the corners (I cut the halves of the moon out of felt and glue them around the beads). Embroider cilia, antennae and mouth, glue the tongue. 

Knit cheeks 12 sc in ring amigurumi . 

Paws 
Getting started with a blue thread. Stuff in the course of knitting. 
1 row: 6 sbn in the spacecraft 
2 row: 6 ARROW (12) 
3 row: (1 sbn, Prib) x6 (18) 
4-8 row (5 rows): 18 sbn
9th row: (1 sbn, UB) x6 (12) 
10-22 row (13 rows): 12 sbn 
Change the thread for light yellow 
23-25 ​​row: from 12 sbn 
26 row: 6 UB, pull the hole, cut the thread leaving a long end for sewing. 
We sew handles to the body (I have it in the 76 row area) 

Tail 

We knit a blue thread 
1 row: 8 sbn in KA 
2-5 row: 8 sbn. Stuff the tip of the tail. We will not fill the tail further. 
6 row: (1 sbn, ub) x2, 2 sbn (6) We knit to the desired length. I have a tail of 8.5 cm. I also inserted a thin wire into the tail, having bent the ears at the ends, so that the tail could bend. 
Sew tail under skirt. 
Schemes of knitting clothes for toys 

Skirt

In the 57th row, we still have front loops. We attach a thread of green turquoise and knit: 
1 row: 54 sbn 
2 row: 2 ce, pribb from ssn to each loop, at the end of a row ss. 
3-8 series (6 rows): 2 ect., Knit ssn without increments to the end of the row, at the end of ss. Do not forget at the beginning of each row to do 2 vp rise. 
Thread fasten, cut and hide. 
Lace can be sewn to the hem of the skirt at will. 

Making a blouse 

In the 59th row, we still have front loops. We 
attach the thread of a light yellow color and knit: 1st row: 54 sbn 
Change the thread to white (I have 100% cotton yarn) and knit ruches, knit on the principle of a collar:
2 row: 1 loop skip to the next. knit 5 CCH (in one loop), again skip the loop, 1 ss, 1 ss, skip the loop, 5 CCH (in one loop), skip the loop, 1 ss, 1cc … and so on until the end of the row. I did 1 cp before each shell, but this is not necessary. 

Thread fasten, cut and hide. 

Outerwear (jacket, snood, beret) 

Jacket or jacket 
When knitting a jacket, I stuck to this video: I’m just warning you that the calculation of the loops for this jacket is designed for a toy of 25-26 cm. If you have a toy more, then you need more loops recruit. I advise you to tie 2-3 rows and try on. Again, watch the video, everything is described in detail. 

Hook №2.0 mm, we pick a thread green turquoise 32 vp + 3 vpp Knit rotary rows.
1st row: 32 SSN 
2 row: 2 ce, (8 SSN, PRE) x3, 3 SSN, PRE, 1 CCH 
3 row: 2 epp, (7 CCH, PRIB) x4, 2 COS, PIB, 1 CCH 
4 row: 2 VPP, (6 CCH, PIB) x5, 6 CCH 
5 row: 2 VPP, 23 CCH, PIB, 22 CCH 
Do not forget to try on the jacket. All sizes of toys are different. Therefore, if you think that the blouse is too small, then tie a yoke 1-2 rows more. 
Further by the rules, before making the sleeves, we would need to make a small sprout on the back so that the jacket converges, but I needed the opposite, so that the jacket diverged. Therefore, I immediately began to connect the sleeves. The loops are distributed as follows: 7 (shelf) + 8 (sleeve) + 17 (back) + 8 (sleeve) + 7 (shelf).
6 row: 2 VPP, 7 CCH, 5 CE, 8 loops are skipped, and in 9 loop we knit the first CCH of the backrest, 17 CCH in total, 5 more steps further, 8 skip and in 9 loop knit first CCH shelves, only 7 CCH 
Again, try on the jacket on the toy. 
7 row: 2 VPP, 7 CCH, 5 CCH along the chain of the sleeves, 17 CCH, 5 CCH along the chain of the sleeves, 7 CCH 
8-9 row: we knit with rotating rows to the desired length. 
Knit sleeves. From the inside out, we attach the thread to the armhole of the sleeves, do 2 cepps, and knit in a circle 5 CCH along the chain, in the side column of the CID of the CRA (see photo), 8 CCH and again of the CRO in the bollard, at the end of the SS. And so in a circle to the desired length. I have 6 rows. 
Tie the bottom of the jacket and shelves sbn purple. At the request we decorate the jacket with sequins, buttons, beads. 

Snud Scarf 

knit with a rubber band 2×2.
We collect on the needles No. 2.5mm 10 loops + 2 edge (12 loops in total) 
1 row: remove the first edge loop without knitting, then knit 1 person. (2 wear, 2 persons) and so alternate to the end of the row, the last edge we knit the loop too. 
2 row: knit we remove according to figure 1, 1 person., (2 ws, 2 people) alternate until the end of the series, the last one. from 
I have a width of 2.5 cm. The length is 30.5 cm, you can even make the length a little less, but again try it on. 

It takes 

Hook №1,0 mm to dial 
one number 6 sc in SC 
2-3 row: 6 sc 
continue hook №2,0mm 
4 number 6 PRIB (12) 
Row 5 (1 CLO PRIB) x 6 (18) 
6 Row: 18 PUB from SSN (36) 
7 row: 36 SSN 
8 row: (4 PRS, UB) x6 (30)
9th row: (3 SSN, UB) x6 (24) 
10 row: 24 sbn
Fasten, cut and hide the thread. 

Everything, it is possible to dress up our kitty!

Legend: Stbn – column without nakida;

V – addition (in one loop we knit 2 Stbn); 
A – decrease (2 front half loops knit together). 
Description of the process of knitting a kitten: 
The beginning of knitting for all parts of the cat is the same – the amigurumi ring . Next, follow the descriptions. 

Amigurumi Kitty Free Pattern

We knit the torso. 
1 row: 6 Stbn; 
2nd row: V (12); 
3rd row: 1 Stbn, V (18); 
4th row: 2 Stbn, V (24); 
5 row: 3 Stbn, V (30); 
6 row: 4 Stbn, V (36); 
7 row: 5 Stbn, V (42); 
8 row: 6 Stbn, V (48); 
9-16 row: 48 Stbn; 
17 row: 6 Stbn, A (42); 
18-19 row: 42 Stbn; 
20 row: 12 Stbn, A (39); 
21 row: 11 Stbn, A (36); 
22 row: 10 Stbn, A (33); 
23 row: 9 Stbn, A (30);
24-26 row: 30 Stbn (30); 
27 row: 8 Stbn, A (27); 
28 row: 27 Stbn (27); 
29 row: 7 Stbn, A (24); 
30 row: 24 Stbn. Add filler. 
31 row: 2 Stbn, A (18); 
32 row: 1 Stbn, A (12). Add filler. 
33 row: A (6). 

Knit the muzzle (cheeks). 
1 row: 6 Stbn; 
2nd row: V (12); 
3 row: 12 Stbn; 
4 row: 2 Stbn, A (9); 
5 row: 1 Stbn, A (6). 
Sew two parts. 

We knit the ear in duplicate. 
1 row: 4 Stbn; 
2 row: 1 Stbn, V (6); 
3rd row: 1 Stbn, V (9); 
4th row: 2 Stbn, V (12); 
5 row: 12 Stbn. 
We fold the ear and knit the two sides together Stbn. 
Sew on the ears. 

Knit the tail.
Knit six rows of white yarn. 
1 row: 6 Stbn; 
2 row: 1 Stbn, V (9); 
3rd row: 2 Stbn, V (12); 
4-5 row: 12 Stbn; 
6 row: 2 Stbn, A (9). Change the color of the blue yarn. Add the filler as knitting. 
7-35 row: 9 Stbn. 
Sew both sides of stbn. 
We sew all the details to the cat, make a mustache from monofilament, glue the eyes, embroider the nose. 
Our cat is ready. 

Fasting can be useful? Keep yourself on the wall

Pleasant knitting.
Photo step by step did not, but everything is simple, it is enough to know the simple principles of knitting
crocheted. Easy and fast.
Kitty came out 25 cm, I have yarn YarnArt Dolce, hook 5.
Pr-increase, 2 bars in one loop
Ub-reduction, 2 loops together
* – number of repetitions

Amigurumi Kitty Marshmallow Free Pattern

Head.
1. 6 sb in the ring
2. Pr * 6. 12
3. (1 сбн, пр) * 6. 18
4. (2 сбн, пр) * 6. 24
5. (3 sbn, pr) * 6. thirty
6. (4 сбн, пр) * 6. 36
7. (5 sbn, pr) * 6. 42
8.-12 unchanged. 42
13. (5 сбн, уб) * 6. 36
14. (4 сбн, уб) * 6 30
15. (3 сбн, уб) * 6. 24
16. (2 сбн, уб) * 6. 18
Fasten, cut the thread.

Legs-torso.
We knit the first leg
1. 6 sb in the ring
2. Ex * 6 12
3-6. No change 12 сбн
We fix the thread, cut it off. We knit the second leg in a similar way, we do not cut the thread, we make 2 st
and attach it to the first stalk, it will be the first loop of the row.
Next, we knit the body in a spiral.
1. The first column we tied, then another 10 sb on the stalk, pr, 2 sb along the chain from the st, 11
sb on the second leg, pr, and 2 sb on the other side of the chain. We get 30 sc.
2. 10 sb, pr, 3 sbn, pr, 3 sbn, pr, 11 sb. 33
3-10. No change 33 sbn
11. (9 сбн, уб) * 3 30
12. No change 30 сбн
13. (3 сбн, уб) * 6. 24
14. No change 24 sbn
15. (2 сбн, уб) * 6. 18
We fix the thread and cut it.

Handles 2 pcs.
1. 6 sb in the ring
2. (1 sb, pr) * 3 9
3. Pr, 8 sc. 10
4-6. No change 10 сбн
7. (Уб, 3 сбн) * 2. 8
8-10. 8 sc.

Ears
1. 6 sb in the ring
2. Pr * 6. 12
3. No change 12 sbn
4. (2 sbn, pr) * 4. 16
5. (3 sc., Etc.) * 4 20

Tail
1. 6 sb in the ring
2. (1 сбн, пр) * 3. 9
3-5. unchanged 9 сбн
6. Уб, 7 сбн. 8
7. No change 8 sbn
8. Ub, 6 sbn
9-11. No change 7 сбн.
A little bit to fill the tip and tie the edge of the sb.
We collect our kitty, I sewed all the details with a Jeans thread in tone, in two pieces.
Handles, if desired, can be made a thread anchor, and they will be mobile. I just sewn)
You can decorate our kitty with a bow.
I have a yarn Jeans, a hook 2.5

Bow.
We make an amigurumi ring, make 5 VP and knit 6 columns with 3 caps,
further 5 VP, a connecting column in a ring, 5 more EPs, 6 posts with 3 meats, 5
VP and connecting column in the ring. We tighten the ring, tie the middle.

Legend:

Art. -Non-lime column
VP-Air Loop
Ave. -Add a
UB.-Ubava
()-Number of loops in a row.

Amigurumi Wonderful Kitty Free Pattern

Head and Torso:

1 row-in the ring Amigurumi Projazit 6 art. 6
2 Series-Pr. In each loop (12)
3 Series-PR + 1 art. -Repeat to the end of the series (18)
4 Series-D. + 2 art. -Repeat to the end of the series (24)
5 row-Art. In each loop (24)
6 Series-PR + 3 art. To the end of the series (30)
7-9 Series-Art. In each loop (30)
10 row-3 St. + UB. To the end of the series (24)
11 Series-Art. In each loop (24)
12 Row-2 St. + UB. 18 
Fill your head with a filler.
13 row-1st. + UB (12)
The head is over. Do not trim the threads with a knit torso.
14 Series-Art. In each loop (12)
15 Series-Ave + 1 art. 18
16 Series-Pr. + 2 Art. 24
17 Row-art. In each loop (24)
18-21 Series-PR + 3 art. 30
22 Row-3 St. + UB. 24
23 Series-Art. In each loop (24)
24 Row-2 St. + UB. 18
Fill the torso with filler.
25 row-1st. + UB. 12
26 Series-Ubavki up to the formation of 6 loops. The thread is trimmed, leaving a long tail. Insert the thread into the needle and pull the loops into the ring. Trim the thread and hide it in the trunk.

Top Legs

Link 8 VP The second from the Hook Loop 1st. + 6 art. 7
1 v P lifting, flip knitting, 7 art. 7
1. VP. Lifting, turn, 7 art. 7
You get a rectangle. Thread from the beginning of knitting to hide in knitting. Fold the rectangle in half, with the connecting poles both edges.

Lower Legs

Link 9 VP in the second from the Hook Loop 1st. + 7 Art. 8
1 v P lifting, flip knitting, 8 art. 8
1. VP. Lifting, turn, 8 art. 8
Fold in half, shake with connecting bars

Ears 
Link 4 VP The second from the hook Loop 1 art. + 2 Art. 3
1 VP, turn, 3 art. 3
1 VP, turn, UB. + 1 Art. 2
1 VP, turn, kill 
Thread hide in knitting and trim.

Tail

Link 14 VP The second from the hook Loop 1 art. + 12 Art. 13
1 VP, turn, 13 art. 13
1 VP, Twist, column in each loop (13)
Fold in half and connect the columns.
Thread hide in knitting and trim.