Amigurumi Book Loving Horse Free Pattern

Head-neck-trunk (this is one detail, but I’ll paint how to knit it in stages)
Head
1p.6sbn
2p.6 increases -12
3p. (Pr, 1sbn) x6 – 18
4p. (2сбн, пр) х6 -24
5р.1сбн, пр, (3сбн, пр) х5,2сбн -30
6-8p.30sbn
9p. (Pr, 6sbn) x2, pr, 15sbn – 33 Additions in this row fall on the part of the detail, on which we will continue to knit the neck.
10р.33сбн
Start knitting the horse’s face
11r.vyazhem jumper from 10v.p., hook hook in 19 loop around the circle, 15sbn, reaching the chain, 10sbn (1sbn in each loop of the chain, behind the back of the pigtail) -25
12р.25сбн
13p.ub, 11sbn, ub, 10sbn – 23
14r. уб, 9сбн, уб, 10сбн – 21
15-17r.21bn
18p10 addition, 11sbn-31
19-27r.31bn
28r. (Уб, 4сбн) х5,1сбн – 25
29p. (Ub, 3sbn) х5,1сбн – 19
30r. (уб, 2сбн) х 5,1сбн – 13
31p. (Yb, 1sbn) х5,1сбн – 7
32r.upravki.
The hole is tightened. We stuff the horse’s face with a filler.

Neck
From the main part we have 18 loops + 10ths of a chain = 28 loops. We fix the thread to 10 sb from 18 – this will be the beginning of the series.
1p.1v.p. lifting, 1sbn in the same loop, 7sb, yb (one of the tables of the loss is for the head part, the second for the column, which is tied on the bridge), 8bb, yb (do the same as the first), 8bn (26)
2р.8сбн, уб, 6сбн, уб, 8Сбн (24)
3р.8сбн, уб, 4ббн, 8ббн (22)
4p. 8 сбн, уб, 2сбн, 8сбн (20)
5-10p.20sbn
11p (1sbn, pr) x2.12sbn, (pr, 1sbn) x2 (24)
12-15р.24 сбн
At this stage, knitting the neck ends and go to knitting the torso.
Torso
1p. dial 10в.п. on the center of the neck, 9sbn in 2n from the hook, 32sbn on the neck, 9sbn along the chain vozd.petel, increase (45)
2p. (7сбн, пр) х5, 4сбн, 3сбн in 1 (53)
3p. (6sbn, pr) x7, 7sbn, 3pr (63)
4p. (9ббн, пр) х6, 5сбн, (пр, 1сбн) х3 (72)
5p. 65 сбн, (2сбн, пр) х2, 1сбн (74)
6p. (pr, 8) x7, pr, 7sbn (82)
7-10p. 82cb
11p. (уб, 8сбн) х7, уб, 7сбн (74)
12-14r. 74sbn
15r. (уб, 7сбн) х7, уб, 6сбн (63)
16r. (уб, 4сбн) х9, уб, 2сбн (53)
17r. 14sbn, (yb, 1cbn) x5, 12cb, (yb, 1cbn) x3 (45)
18р уб, 1сбн etc. up to the end of the row, fill the trunk with filler very tightly so that all the bends are leveled. Make a seam.
Nostrils (2 items)
3в.п., in the third loop from hook 6сбн – in a ring to not connect . Leave the thread to sew.

Tail
1-23 = 6p
24- to make 2ub (4)
25-31 = 4p tighten the thread
Measure out the desired piece of wire, insert it into the tail and sew it to the body, bending it, like in the photo. Brush at the end is easy:
cut 8-10 pieces of yarn about 4cm, pull the threads in the middle, and then at the top of the brush dome. Sew her tail tip.
Eyes (2 parts) – white yarn
1p – 6 sb in the ring amigurumi
2p – (pr) x 6 times = 12 sb
3p – (1сбн; пр) х 6 times = 18 сбн
4р – (2сбн; пр) х 6 times = 24 сбн
5p – 6p – 24 sbn each
7р – (2 сбн; уб) х 6 times = 18 сбн
Leave the thread to sew. Sew a half-eye, tightly fill the part, sew the remainder of the eye. Try it on, then sew on the bead pupils.
Eyelashes (2 parts)
9set, 1cc in 2p., 1sbn, 1pst, 1stsn, 1pst, 1sbn, 1ss – leave the thread for sewing

Lips
Upper = 9n – 1ss, 2sbn, 3sbn in 1p, 2sbn, 1ss
Lower = 9п-1сс, 2сбн, 3стсн in 1п, 2сбн, 1сс
Ears (2 parts)
1p. 4sbn in the ring amigurumi (4)
2p (increment, 1cb) x2 (6)
3p. (an increase, 2сбн) х2 (8)
4p. (an increase, 3сбн) х2 (10)
5p. (increase, 4bn) x2 (12)
6p. (increase, 5bn) x2 (14)
7p. (increase, 6bn) x2 (16)
8p (increase, 7bn) x2 (18)
9p. (7cb, decrease) x2 (16)
10p. (6cb, decrease) x2 (14)
11p. (5cb, decrease) x2 (12)
12p. (4cb, decrease) x2 (10)
13p. (3cb, decrease) x2 (8)
14p. (2cb, reduction) x2 (6)
15-18r. 6sbn
Leave a piece of string for sewing.

Chupchik
Make a pompom out of the desired color and sew to the head.
Hind legs (2 pieces)
1p. 5noz.p, 2sbn in 2 from the hook loop, 3bn in the next. 3в.п., 3сбн in the last loop, turn, the first loop is passed, 2сбн (10)
2p. 4bn, 4sbn in 1, 4bn, 4bn in 1, 3 sbn (16)
3p. 2sbn, 3sbn in 1, 8cb, 3cb in 1, 4sbn (20)
4-8r. 20sbn
9p. 4ббн, уб, 9сбн, уб, 4сбн (19)
10r. 13сбн, уб, 4ббн (18)
11p. 4сбн, уб, 7сбн, 3ммест, 2сбн (15)
12r. 11сбн, 3 вмест, 1сбн (13) Approximately in this row it is necessary to fill a leg with a filler, forming a flat part.
13r. 9bn, 3 together, 1sbn (10)
14р.10сбн
15r. 3ббн, уб, 3сбн, уб (8)
16-20r. 8сбн
21р.4сс, 4пссн (8)
22r. 4ss, 4pss (8)
23-30r. 8сбн
31p. 1ub.ss, 2ss, 1ub.pssn, 2pss (6)
32r. 3ss, 3pcc (6)
33-40р 6сбн (in this place it is necessary to cut off the thread of the easter color, changing it to black or brown)

Hoof
41р 6 addition (12)
42r. 5bn, 3bn in 1, 3cb in 1, 3cb, (2cb in 1) x2 (18)
43r. 3ss, 4sbn, (2cb in 1), 4sbn, 5ss (20)
44r. 4ss, 11cb, 5ss (20)
45r. 3 together, 11 сбн, behind the back wall of loop- 2sbn, * уб, 3vmeste, уб *, 2сбн, repetition from * to *, 1ss. The legs are both front and rear in our skeleton, so before pulling the hole, measure the piece of wire thicker, wrapping the ends with adhesive plaster.
Fill the hoof with a filler, pull off the loop with a hook or needle. Puncture the hoof with a needle through, pulling the lower part and giving it a flat shape.
The second leg is tied in a mirror image! Do not forget about this J
Front legs (2 pieces)
1p. 6sbn (amigurumi ring)
2p. 6 addition (12)
3p. (1сбн, пр) х6 (18)
4-8p 18sbn
9p. (1cb, yb) x6 (12)
10-12r. 12сбн Fill the foot with filler, forming a flat part.
13r. 5sbn, 3 together, 4sbn (10)
14р.10сбн
15r. 3ббн, уб, 3сбн, уб (8)
16-20r. 8сбн
21r. 4pss, 4ss (8)
22r. 4pss, 4ss (8)
23-30r 8sbn
31p. 1up.pssn, 2pssn, 1ub.ss, 2ss (6)
32r. 3pss, 3ss, (6)
33-40r 6sbn
The thread is cut off and we knit the hoof (41-45) with black or brown color without changes. Frame do the same as the hind legs.
Girls, the horse is cartoon and assumes a fixed position, as in the photo. BUT! It is possible to make it and stand up, having connected legs or foots dr.sobom if someone needs, I can paint.
Horse in other angles:

More Amigurumi Horse Ideas:

Amigurumi Small Horse Free Pattern

Head
1 row: Dial 2 VP and tie 6 PRS in the second from the Hook Loop [6].
2 row: * Raise *. Repeat * 6 times [12].
3 row: * 1 PRS, raise *. Repeat * 6 times [18].
4 row: * 2 PRS, raise *. Repeat * 6 times [24].
5-7 Series: no changes [24].
8 row: * 2 prs, decrease *. Repeat * 6 times [18].
9 row: No changes [18].
10 Row: * 2 PRS, raise *. Repeat * 6 times [24].
11 row: No changes [24].
12 Row: * 3 PRS, raise *. Repeat * 6 times [30].
13 row: No changes [30].
14 Row: * 4 PRS, raise *. Repeat * 6 times [36].
15-17 Series: no changes [36].
18 Row: * 4 prs, decrease *. Repeat * 6 times [30].
19 Row: * 3 prs, decrease *. Repeat * 6 times [24].
20 Row: * 2 prs, decrease *. Repeat * 6 times [18].
21 Row: * 1 prs, decrease *. Repeat * 6 times [12]. Fill.
22 row: * Decrease *. Repeat * 6 times [6].
Tighten the hole.
Fasten and hide the thread.

Legs (4 parts)
1 row: Dial 2 VP and tie 6 PRS in the second from the Hook Loop [6].
2 row: * Raise *. Repeat * 6 times [12].
3 row: No changes [12]. Changing the color of the yarn.
4-10 Series: No changes [12]. Fill. Leave the thread to sew the legs to the torso.

Neck
Leave a long tip to sew the neck to the head.
1 row: Dial 14 vp and wink them into the ring. To tie 6 PRs, raise, 6 PRS, increase [16].
2 row: * 7 PRS, raise *. Repeat * 2 times [18].
3 row: * 8 PRS, raise *. Repeat * 2 times [20]. Fill. Leave the sewing thread to the torso.

Ears (2 parts)
1 row: Dial 2 VP and tie 6 PRS in the second from the Hook Loop [6].
2 row: * 2 PRS, raise *. Repeat * 2 times [8].
3 row: * 3 PRS, raise *. Repeat * 2 times [10].
4 Row: * 4 PRS, raise *. Repeat * 2 times [12].
5 row: No changes [12].
6 Row: * 4 prs, decrease *. Repeat * 2 times [10].
7 row: * 3 PRS, raise *. Repeat * 2 times [8]. Leave a thread for sewing ears to the head.

Torso
1 row: Dial 2 VP and tie 6 PRS in the second from the Hook Loop [6].
2 row: * Raise *. Repeat * 6 times [12].
3 row: * 1 PRS, raise *. Repeat * 6 times [18].
4 row: * 2 PRS, raise *. Repeat * 6 times [24].
5 row: * 3 PRS, raise *. Repeat * 6 times [30].
6 Row: * 4 PRS, raise *. Repeat * 6 times [36].
7-14 Series: no changes [36].
15 Row: * 4 prs, decrease *. Repeat * 6 times [30].
16 Row: * 3 prs, decrease *. Repeat * 6 times [24].
17 Row: * 2 prs, decrease *. Repeat * 6 times [18].
18 Row: * 1 prs, decrease *. Repeat * 6 times [12]. Fill.
19 Row: * Decrease *. Repeat * 6 times [6].
Tighten the hole and leave the thread to sew the tail.

Materials: 
Medium-thick acrylic yarn – (pink, red and milky) 
Hooks No. 3 and 5 

Needle 
Filler 
1 pair of eyes 12 mm in diameter. 
Adhesive for fabric. 
Marker loops 

Note: 
The model is knitted in a circle in a spiral (without the completion of the rows of the connecting post). 

Amigurumi Horse Unicorn Free Pattern

Hind Feet: (2 pieces) 
Knit crochet No. 3 with a red thread. 
Row 1: The initial magic ring, 6 RLS in this ring. (6) 
Row 2: 2 sc in each RLS until the end of the series. (12) 
Row 3: * 1 sc, 2 sc in the next. RLS *, repeat to the end of the series. (18) 
Row 4: * 2 sc, 2 sc in the next. RLS *, repeat to the end of the series. (24)
Row 5: * 3 sc, 2 sc in the next. RLS *, repeat to the end of the series. (30) 
Row 6-10: RLS to the end of the series. (30) 
Change the color to pink. 
Row 11-14: RLS to the end of the series. (30) 
Row 15: * 3 RLS, 2 RLS together *, repeat to the end of the series. (24) 
Row 16-17: RLS to the end of the series. (24) 
Row 18: * 2 sc, 2 scs together *, repeat to the end of the series. (18) 
Row 19-20: RLS to end of row (18) 
Start filling with filler. 
Row 21: * 1 sc, 2 scs together *, repeat until the end of the series. (12) 
Row 22-23: RLS to the end of the series. (12) 
Add the filler, short of the upper edge of the leg. 
Row 24: * 2 RLS together *, repeat until the end of the series. (6) 
Row 25: RLS to the end of the series. (6)
Finish the work, leaving the long end, stretch it through the hinges and close the hole. 
Front legs: (2 pieces) 
Knit crochet number 3 with a thread of red color. 
Row 1: The initial magic ring, 6 RLS in this ring. (6) 
Row 2: 2 sc in each RLS until the end of the series. (12) 
Row 3: * 1 sc, 2 sc in the next. RLS *, repeat to the end of the series. (18) 
Row 4: * 2 sc, 2 sc in the next. RLS *, repeat to the end of the series. (24) 
Row 5-10: RLS to the end of the series. (24) 
Change the color to pink. 
Row 11-17: RLS to the end of the series. (24) 
Row 18: * 2 sc, 2 scs together *, repeat to the end of the series. (18) 
Row 19-20: RLS to the end of the series. (18) 
Start filling with filler.
Row 21: * 1 sc, 2 scs together *, repeat until the end of the series. (12) 
Row 22-23: RLS to the end of the series. (12) 
Add the filler, short of the upper edge of the leg. 
Row 24: * 2 RLS together *, repeat until the end of the series. (6) 
Row 25: RLS to the end of the series. (6) 
Finish the work, leaving the long end, pull it through the hinges and close the hole. 

Body: 
Knit with pink yarn and crochet No. 3. 
Row 1: Initial magic ring, 6 RLS in this ring. (6) 
Row 2: 2 sc in each RLS until the end of the series. (12) 
Row 3: * 1 sc, 2 sc in the next. RLS *, repeat to the end of the series. (18) 
Row 4: * 2 sc, 2 sc in the next. RLS *, repeat to the end of the series. (24) 
Row 5: * 3 sc, 2 sc in the next. RLS *, repeat to the end of the series. (thirty)
Row 6: * 2 sc in the next. RLS, 4 scs *, repeat to the end of the series. (36) 
Row 7-17: RLS to the end of the series. (36) 
Row 18: * 2 RLS together, 4 scs *, repeat to the end of the series. (30) 
Row 19-25: RLS to the end of the series. (30) 
Start filling with filler. 
Row 26: * 2 scs together, 3 scs *, repeat to the end of the series. (24) 
Row 27: * 2 scs together, 2 scs *, repeat to the end of the series. (18) 
Fill the entire body with a filler. 
Row 28: * 2 RLS together, 1 RLS *, repeat to the end of the series. (12) 
Row 29: * 2 RLS together *, repeat to the end of the series. (6) 
Finish the work, leave the long end and sew a hole to it. 

Head: 
Hook No. 3 
Start knitting with milk color.
Row 1: The initial magic ring, 6 RLS in this ring. (6) 
Row 2: 2 sc in each RLS until the end of the series. (12) 
Row 3: * 1 sc, 2 sc in the next. RLS *, repeat to the end of the series. (18) 
Row 4: * 2 sc, 2 sc in the next. RLS *, repeat to the end of the series. (24) 
Row 5: * 2 sc in the next. RPS, 3 RLS *, repeat to the end of the series. (30) 
Row 6: * 2 sc in the next. RLS, 4 scs *, repeat to the end of the series. (36) 
Row 7: * 5 sc, 2 sc in the next. RLS *, repeat to the end of the series. (42) 
Row 8-14: RLS to the end of the series. (42) 
Change the color to pink. 
Row 15-16: RLS to the end of the series. (42) 
Row 17: * 2 RLS together, 5 RLS *, repeat to the end of the series. (36) 
Row 18: * 2 RLS together, 4 scs *, repeat to the end of the series. (thirty)
Row 19-22: RLS to the end of the series. (30) 
Attach the eyes just above the row, tied with milky color. 
Start filling with filler. 
Row 23: * 2 scs together, 3 scs *, repeat to the end of the series. (24) 
Row 24: * 2 scs together, 2 scs *, repeat to the end of the series. (18) 
Fill the entire head with filler. 
Row 25: * 2 RLS together, 1 RLS *, repeat to the end of the series. (12) 
Row 26: * 2 RLS together *, repeat until the end of the series. (6) 
Finish the work, leave the long end and sew a hole to it. 

Ears: (2 pieces) 
Knit with pink yarn and crochet No. 3. 
Row 1: Initial magic ring, 4 sc in this ring. (4) 
Row 2: * 2 sc in the next. RLS, 1 RLS *, repeat to the end of the series. (6)
Row 3: * 2 sc in the next. RLS, 2 RLS *, repeat to the end of the series. (8) 
Row 4: * 2 sc in the next. RPS, 3 RLS *, repeat to the end of the series. (10) 
Row 5: * 2 sc in the next. RLS, 4 scs *, repeat to the end of the series. (12) 
Row 6: * 2 sc in the next. RLS, 5 RLS *, repeat to the end of the series. (14) 
Row 7: * 2 sc in the next. RPS, 6 sc *, repeat to the end of the series. (16) 
Finish the work, leave the long end for sewing to the head. 
Flatten and do not add filler. 

Horn: 
Knit with red yarn and crochet No. 3. 
Row 1: Initial magic ring, 4 RLS in this ring. (4) 
Row 2: * 2 sc in the next. RLS, 1 RLS *, repeat to the end of the series. (6) 
Row 3: * 2 sc in the next. RLS, 2 RLS *, repeat to the end of the series. (8)
Row 4-8: RLS to the end of the series. (8) 
Finish the work, leave the long end for sewing to the head. 
Fill with filler. 

Mane: (consists of three parts) 
1) Knit a double thread of milk and red flowers by hook No. 5. (1 detail) 
2) Knit with a red thread crochet № 3. (2 parts) 
14 cent. * (СБН, СН, С2Н, СН, СБН) in the 2nd c.p. from the hook. 
SS in the next. vp * Repeat until the last c.p. 
Note: There should be 7 small shells. 

Tail: 
Knit with double thread of milk and red flowers by hook No. 5. 
8 cp. * (СБН, СН, С2Н, СН, СБН) in the 2nd c.p. from the hook. 
SS in the next. vp * Repeat until the last c.p. 
Note: There should be 4 small shells.

Assembling: 
Sew ears and horn to the head. 
A red thread embroider two nostrils in the form of a cross. 
Sew your feet to the body. 
Sew my head to the body. 
Sew together the pieces of mane. (In the center – milky red, on each side a red mane). Sew on the mane behind the head and body.
Fold the tail in half, combining the two seashells, and sew it in the lower back of the body.

We are preparing a hook No. 1.75 or No. 2, suitable for him yarn. 
Decide on the color scheme yourself – Horses are different – black, white, red! 
The main thing for the tail and mane is to find the right shade so that the combination is harmonious. 
The wire is needed in isolation, 4mm thick – who knit a blotter, he knows – the same. 

A piece of white knitwear (an old T-shirt, or a T-shirt, or … but we will not tell anyone about this) 

Acrylic paints or special dyes for fabric. 
Oil paint shade suitable for the color of yarn, which will knit the horse itself. 
Oil paint should be darker than the base color, the color of the yarn. 
Filler, of course. 

So let’s go! 

Amigurumi Horse of Cauca Free Pattern

We start knitting horses with the details of the body 

1p.6 
Sat 2r.6 times increase = 12
3p.6 times (increase, 1Sbn) = 18 
4p.6 times (2Sbn, increase) = 24 
5p.1Sbn, increase, 5 times (3Sbn, increase), 2Sbn = 30 
6p.6 times (4Sbn, increase) = 36 
7p.2 Cbl, increase, 5 times (5Bs, increase), 3Sbn = 42 
8r.42Sbn 
9r.6 times (increase, 6Sbn) = 48 
10р.48Сбн 
11р. 6 times (increase, 7Сбн) = 54 
12р. 54 Sat 
13r.6 times (increase, 8 Sat) = 60 
14-18 p . 60 Sat
19r.4 times (decrease, 3 Sat), decrease, 38 Sat = 55 
Sat 20-22 p.55 Sat 

Align the beginning of the row relative to the beginning of the second row of knitting – move forward, tying required for this amount 
This number is determined visually, the total number of loops does not change during this maneuver.
23r. 5 times (decrease, 3Сбн), 30 Сбн = 50 
24-26р. 50 Sat 27r . 
Attention! 
This series should start from the beginning of reductions in the previous rows. Therefore, again move the start of knitting. 
Again, this is determined by the eye. 
5 times (decrease, 4Cbn), 5 Cbd = 45 
28p.45 Cbn 
29r.5 times (decrease, 7x) = 40 
30r.40 Cbn 

Bite off a wire about 20-21 cm long. 
Bend it arc. 
Determine the place of growth of the hind legs. 
To do this, we first determine where the back of the horse is, where the tummy is – the back is slightly arched, the tummy, on the contrary, is convex. 
Then you need to determine the middle of the back and abdomen, so that the legs are in the lower part of the body, and not somewhere on the side.

The center can be marked with a marker – a contrasting thread, for example. 
The holes for the legs are made by widening the distance between the hook and the knitting needle. Holes should be quite small – on the diameter of the wire. 
You need to arrange them between 12 and 13 rows. 
Between them there should be about 18 Sbc, if we count on the 13th row. 

31р.5 times (decrease, 6Сбн) = 35 
32р.35Сбн 

Fill the back part of the body, evenly distributing the filler around the frame. 
The frame itself, or rather the upper part should be at a distance of 1 cm from the knitted fabric. 

Bend the second wire for the front legs. 
We also verify the distance and make holes for the frame, place them between 26 and 27 rows.
When viewed from the side, the front and rear legs should be almost in line. 

The edge of the arc of the frame should rest against the knitted fabric. 
Fill the space around the frame of the front legs with filler, properly tamping it. 

33r.6 times (decrease, 5Сбн) = 30 
34р.6 times (decrease, 3 Сбн) = 24 

Fill the rest of the body 

35р.6 times (decrease, 2 Сбн) = 18 
36р.6 times (decrease, 1 Сбн) = 12 
37р. 6 decreases = 6 

Pull down the hole, before that add some filler if necessary. 
At the ends of the wire twist the small loops and bend them forward in the shape of the foot. 
As a result, at this stage, the legs should be about 5 cm long. 

Getting to the hooves.
1р.6Сбн 
2р.6 times increase = 12 
3р.6 times (increase, 1Сбн) = 18 
4р.6 times (2Сбн, increase) = 24 
5р.24Сбн for the back wall of the pigtail 
6р.24Сбн
7р.6 times (2Сбн, diminishing ) = 18 
8р.6 times (decrease, 1Сбн) = 12 
Instead of the last Cbn, we knit Cc, in which we change the color of the hoof to the main color of the horse. 
9r. 6 decreases 

After the first reduction is completed, cut off the thread that knitted the hoof and tie this tip firmly on the two knots together with the tip of the thread of a new color. 

After two or three reductions of the 9th row, insert the frame and fill the hoof, distributing the filler evenly around the frame.

After finishing the row, fix and cut the thread, leaving a long tip for the subsequent winding of the leg. 
Thread the tip of the thread into the needle and tighten the part around the frame. 

Wrap the wire double-sided tape. 
Who has no scotch, try to use Moment – ​​Crystal glue. 
Try to apply a thin layer of it. 

We wind wire with thread. 

Repeat the same with the rest of the legs. 

Begin to knit a  snout 11 rubles. A chain of 10Vp – jumper, hook hook into the 19th loop in a circle, 15Sbn, reaching the chain, 10Sbn (1Sbn in each loop of the chain, behind the back wall of the pigtail) = 25 
12r.25Sbn 
13r.The addition , 11Sbn, decrease, 10Sbn = 23 
14р. Decrease, 9Sbn, decrease, 10Sbn = 21 
15-17r.21Sbn 18r.10 
times addition, 11Sbn = 31 
19-24r.31 
25r.5 times (decrease, 4Sbn), 1Sbn = 25 
26r.5 times (decrease, 3Sbn), 1SBN = 19
27р.5 times (decrease, 2Сбн), 1Сбн = 13 
28р.5 times (reduction, 1Сбн), 1Сбн = 7 
29р.5 decrease. 
Fasten the thread, cut, pull the hole. 
Fill the muzzle. 

Getting to the neck knitting. 
From the main part we have 18 loops left + 10 loop chain = 28 loops. 
On these loops we will knit the neck. 
We attach the thread to the 10th Sbn of 18 – this will be the beginning of the series. 
Knit in a spiral. 

1p.1Vp lifting, 1Sbn in the same loop, from which raised Bp – this is one element, the first Cbn in a row, 7Cbn, a decrease (one of the reduction tables falls on a head detail, the second on a column, which is knitted on a jumper), 8Cbn, decrease (in the same way as the first), 8Сбн = 26
2p.8Sbn, Gaunt (one column in the decrease of the previous row, second to the column jumper), 6Sbn, Gaunt, 8Sbn = 24 
3p.8Sbn, Gaunt, 4Sbn, Gaunt, 8Sbn = 22 
4р. 8Sbn, increase, 2Sbn, increase, 8Sbn = 20 
5-10r.20 11 
p.2 times (1Sbn, increase), 12Sbn, 2 times (increase, 1Sbn) = 24 
12-15r.24Sbn 
16p.2raza (2Sbn, increase), 2Sbn, 2Psn (polustolbik with sc) 4Ssn (column with sc) 2Psn, 2Sbn, 2 times (gain, 2Sbn) = 28 
17r.7Ss, 3Sbn, 2Psn, 4Ssn, 2Psn, 3Sbn, 7Ss = 28 
thread fasten and cut , leaving a long tip for later sewing parts to the body. 

We pin the head to the body with pins, so that the extreme point of the neck under the head touches the last straightened row of the body.

We sew parts – one short stitch behind the body, one for the closest wall of the pigtail, we sew a seam by analogy with lacing, carefully tightening each stitch. 

Ears 
Chain 8Vp + 1Vp lifting 
1p.7Sbn, 3Sbn to the last loop of the chain, 7Sbn. Knitting in a circle does not close, rotate. 
2p.1Vp, in the same loop, from which they just raised the Bp, knit 1Sbn, 4Psn, 5Sbn. Turn. 
3r. 1Bn + 1Sbn to the same loop, 8Sbn, 2Sbn to the next loop. 
Fasten the thread, cut off, leaving a long tip, nudge it into a needle and tilt along the seamy side to the base of the ear. 

Fold the eyelet in half lengthways and grab both sides together for 0.5 cm from the base with several stitches.

Fasten the thread, cut off, thread the tip of the thread into the needle, carefully thread it to the base and sew the ear to the head part, previously pinned with pins. 

Tail 
1R. In the ring amigurumi 8Sbn 2-7p.8Sbn 
We cut the yarn into segments of approximately 16-17cm. 
It will be convenient if you pick up any suitable template. 
I have this time made a notebook. 
The yarn is wound on this pattern, then cut at one point – we get segments of threads of the same length. 
And the tail and mane need segments of the same length, so we prepare everything at once. 
With the help of a hook (you can take a size smaller than the one that was knitted), the yarn clings to the tail, according to the principle of fringe.
The photo shows the direction of introduction of the hook into the canvas and the direction of the thread, which we insert relative to the hook and details. 

Ready tail sew to the body between 11 and 13 next to the start of knitting. 

Mane 
From ears to withers we outline the line of growth of the mane. 
If you have a dark yarn, you can use a remnant, if light – a simple pencil or gel pen, for example (in the second case – do not be particularly zealous). 
The line will be closed with a yarn, but nevertheless try to hold it neatly. 
Attach the mane. 
Again, pay attention to which way we are introducing the hook, hooking the thread so that the growth line is neat. 
Tighten each thread attached securely. 

Having finished with a mane, we begin to increase a bang.
For this, we also designate a bang area in a contrasting line. 
Starting from the ears, attach a few threads, sticking a hook in the same direction that you stuck in the mane – send these strands behind the ears. 
The following rows begin to build in the direction of the face, respectively, stick the hook in the opposite direction. Threads need to be attached to each column and row so that there are no bald spots. 

Now all this lush vegetation needs to be cut. Bang leave a length of approximately to the middle of the face. 
To trim the mane, turn the horse upside down and trim the mane so that all the threads are the same length. 
It is desirable that the mane lowered on its side does not cover the beginning of the growth of the front leg. 
Trim the tail too.
So that the bang does not stick out, it can be slightly moistened and tied with a thread before drying. 
You can do it later, after the eyes are sewn. 

Eyes 
For the eyes, we need to cut a circle with a diameter of 3.5 cm from a piece of white knitwear. 
Seam over the edge of this circle. 
Before you finally pull off the circle, fill it, slightly flattening, and fasten the thread. 
The thread is not cut off. 
We overtighten the ball in the center with two turns, fasten the thread. 
Then we take the black bobbin thread and also separate the eyes with two turns. 
Sew the white coil thread eyes to the muzzle, pre-fixing them with a pin.
On the sewn eyes, gently draw the pupils with black acrylic paint, set the glare with white paint. 
I use a toothpick for this. Nostrils also draw in black. 

Paints, by the way, are better suited for acrylic fabrics. 
Although the usual can also be used. 

Smile We 
embroider a smile with a thin black thread. 
I have this thin wool thread for embroidery. A smile is one stitch well stretched in an arcuate shape. 
At the edges of the smile – short stitches for greater expressiveness. 

Toning 
Now we are starting to tint the horse so that it becomes more interesting and effective. 
We take oil paints.
It is advisable to take the color on the tone darker about the color of the yarn. At first I thought that black could be useful, but then I stopped at Koput-Mortuum dark. 
So he is some kind of brown-maroon. 
Squeeze out a little paint on a napkin or paper towel to absorb excess oil. 

Then with a stiff brush, it will need bristle, take quite a bit of paint and begin to make strokes on the paper until these strokes become barely noticeable. 

Now we are starting to put a tone on our Tsatsu. 
It is advisable to highlight the area of ​​the back, croup, the beginning of the growth of the legs and the legs themselves – the upper part. 
Shade a little face and cheekbones – be careful, do not touch the white eyes. 

Now our Swell is ready!

Legend:
sbn – column without crochet 
pr – increment, tie two bars in one loop ,
yb – decrease, tie two loops together 
ss – connecting bar 

Amigurumi Rainbow Horse Free Pattern

Head-body:

Pink or other color 
1p – 6st 
2p -p.6 times (12st ) 
3p -1st, pr 6 p (18st) 
4p. – 2st, pr 6 times (24st) 
5p -3st, pr 6 times (30st) 
6p-30st 
7p -4st, pr.
6 times (36st) .
8p.- 36st 
9p. -delim on 24 (head) and 12 loops (neck and body) 
Continue to knit the head:
10-11r -24st 
12p -3st, pr 6 times (30st) 
13r-30st 
14p -4st, pr.6 times (36st) 
15- 16p-36st
Changing the white yarn
17p -4st, K 6 times (30st) 
18 p -30st 
19F -4st, etc. 6 times (36ST) 
20p -4st, K 6 times (30st) 
21P -3st, K 6 times (24st) 
22 p – 2st, уб 6 times (18st) 
23р – 1st, уб 6 times (12st) 
24р-decrease to the end

Neck, body:

Attach a new thread and knit  
1-4p -12st 
5p – 3st, pr.3 times (15st) 
6p – 15st
7p – 4st, pr.
3 times (18st) 
8-10p -18st 
11p -2st, pr 6 times (24st) 
12-13p – 24st 
14p 3st. pr 6 times (30st) 
15p -4st, pr.6 times (36st) 
16-28r -36st 
29r -4st, 6 times (30st) 
30p -3st, 6 times 6 times (24st) 
31 r -2st, 6 times 6 times (18st)
32р – 1st, уб 6 times (12st) 
33 р-reduction to the end, fix the thread 

Handles: 
Start white
1р – 6ст 2р -рr. 6 times ( 12ст )
3-5р -12ст 
6р -4ст. kill 2 times (10ст) 
Change the thread to pink 
7р-3ст, уб 2 times (8st) 
8-21р – 8ст 
22р – Decrease to the end 

Feet: 
Start white
1p – 6st 2p -p.6ra (12st) 
3p – 3st, pr 3 times (15st) 
4-6p – 15st
7p -3st, уб 3raza (12st) 
8р -4ст, уб 2 times (10st) 
9-23р -10st 
24р- reduction to the end of the 

Ears:

1р- 6st in the ring
2р-1ст , pr, 3 times (9st) 
3p – 9 st
4p – 2st, pr 3 times (12st) 
5p -12 st 
6p – 3st, pr 3 times (15st) 
7p -4st, pr 3 times (18st)
8p -18st 
9p-1st, 6d 6p (12st) 
10-12p – 12st 

Nostril:

Attach the thread and knit 5pins in 1 loop, then cut the thread so that it is enough for the 2nd nostril and pull the thread at the level of the second nostril and knit the same way. We fix, cut off the thread.