This adorable plush teddy bear is designed with soft proportions, a round head, and a cozy sweater detail.
The pattern is written clearly for confident beginners to intermediate crocheters and results in a cuddly, gift-ready toy.

FINISHED SIZE

Approx. 28–30 cm (11–12 inches) tall
(Size may vary depending on yarn, hook, and tension.)

MATERIALS

• Super bulky / plush yarn
  (e.g. Himalaya Dolphin Baby, YarnArt Dolce, Alize Softy)
• Main color: Bear body
• Secondary color: Sweater
• Crochet hook: 3.5 mm – 4.0 mm
• Safety eyes (10–12 mm)
• Safety nose
• Fiberfill stuffing
• Tapestry needle
• Scissors
• Thin matching yarn/thread for facial embroidery

ABBREVIATIONS (US TERMS)

• ch – chain
• sc – single crochet
• inc – increase (2 sc in same stitch)
• dec – decrease (single crochet 2 stitches together)
• st – stitch
• R – round
• ( ) – stitch count at end of round
• * * – repeat instructions between asterisks

Work in continuous spiral rounds unless stated otherwise.

HEAD

R1: 6 sc into magic ring (6)
R2: inc in each st (12)
R3: 1 sc, inc ×6 (18)
R4: 2 sc, inc ×6 (24)
R5: 3 sc, inc ×6 (30)
R6: 4 sc, inc ×6 (36)
R7: 5 sc, inc ×6 (42)
R8–R12: 42 sc (5 rounds)

Insert safety eyes between R9–R10, about 6–7 sts apart.

R13: 5 sc, dec ×6 (36)
R14: 4 sc, dec ×6 (30)
R15: 3 sc, dec ×6 (24)
R16: 2 sc, dec ×6 (18)
R17: 4 sc, dec ×3 (15)

Stuff firmly.
Fasten off, close opening.

MUZZLE

R1: 6 sc into magic ring (6)
R2: inc in each st (12)
R3: 1 sc, inc ×6 (18)
R4: 18 sc

Fasten off, lightly stuff.
Attach safety nose and embroider mouth line before sewing to head.

EARS (MAKE 2)

R1: 6 sc into magic ring (6)
R2: inc in each st (12)
R3: 1 sc, inc ×3, 6 sc (15)

Flatten slightly, do not stuff.
Fasten off leaving long tail for sewing.

BODY

R1: 6 sc into magic ring (6)
R2: inc in each st (12)
R3: 1 sc, inc ×6 (18)
R4: 2 sc, inc ×6 (24)
R5: 3 sc, inc ×6 (30)
R6: 4 sc, inc ×6 (36)
R7: 36 sc

Change to sweater color.

R8–R9: 36 sc
R10: 4 sc, dec ×6 (30)
R11–R12: 30 sc
R13: 3 sc, dec ×6 (24)
R14–R15: 24 sc
R16: 2 sc, dec ×6 (18)
R17–R18: 18 sc
R19: 4 sc, dec ×3 (15)

Stuff firmly.
Fasten off and close opening.

ARMS (MAKE 2)

R1: 6 sc into magic ring (6)
R2: inc in each st (12)
R3: 1 sc, inc ×6 (18)
R4: 18 sc
R5: 1 sc, dec ×6 (12)
R6: 12 sc

Change to sweater color.

R7–R9: 12 sc
R10: 10 sc, dec (11)
R11: 11 sc
R12: 9 sc, dec (10)
R13: 10 sc

Lightly stuff lower part only.
Flatten top and crochet 5 sc through both layers to close.
Fasten off.

LEGS (MAKE 2)

Ch 5.
Work in an oval around the chain.

R1: From 2nd ch from hook: inc, 2 sc, 3 sc in last ch; on opposite side: 3 sc (10)
R2: inc, inc, inc, 2 sc ×2 (16)
R3: inc, 1 sc ×3, 2 sc, inc, 1 sc ×3, 2 sc (22)
R4–R5: 22 sc
R6: 3 dec, 2 sc, dec, 1 sc ×3, 5 sc (16)
R7: 2 dec, 2 sc, dec, 1 sc ×2, 4 sc (12)
R8–R12: 12 sc
R13: dec, 10 sc (11)
R14: 11 sc
R15: dec, 9 sc (9)

Stuff firmly.
Flatten top and close with 5 sc through both layers.
Fasten off.

ASSEMBLY

1. Sew muzzle to lower center of head.
2. Attach ears slightly angled on top sides of head.
3. Sew head to body securely.
4. Attach arms to sides of sweater area.
5. Sew legs evenly at bottom of body.
6. Embroider gentle eyebrow lines if desired.

COPYRIGHT & USE

This pattern is an original design.
You may sell finished toys made from this pattern.
Do not copy, translate, or redistribute the pattern itself.

© Amigurumi Badoomobile

🎨 Finished AMIGURUMI PLUSH TEDDY BEAR– Color Variations and Accesories

This cute teddy bear wearing non-removable pants is crocheted mostly in one piece, making it sturdy, beginner-friendly, and perfect as a handmade gift or nursery decor.
The bear has a soft, rounded shape with simple details and clean color transitions.

When made with the recommended materials, the finished teddy bear measures approximately 19 cm (7.5 inches) tall, excluding the ears.

📌 Pattern Information

• Skill level: Beginner to Intermediate
• Construction: Legs, body, and head worked in one piece
• Pants: Integrated (non-removable)
• Language: US crochet terms

🧶 Materials

• Yarn: YarnArt Jeans (55% cotton / 45% acrylic, 160 m / 50 g)
  • Main color (bear)
  • Pants color
  • White (muzzle)
• Hook: 3.0 mm
• Safety eyes: 9 mm
• Fiberfill stuffing
• Tapestry needle
• Scissors
• Optional: small decorative button

✂️ Abbreviations (US Terms)

• MR – Magic Ring
• ch – chain
• sl st – slip stitch
• sc – single crochet
• inc – increase (2 sc in one stitch)
• dec – decrease (sc 2 together)
• BLO – back loop only
• FLO – front loop only
• ( ) – stitch count at end of round
• * – repeat instructions

🐻 Arms (make 2)

R1: 6 sc in MR (6)
R2: inc × 6 (12)
R3: (1 sc, inc) × 6 (18)
R4–7: 18 sc (4 rounds)
R8: (4 sc, dec) × 3 (15)
R9–10: 15 sc (2 rounds)
R11: (3 sc, dec) × 3 (12)
R12–13: 12 sc (2 rounds)
R14: (4 sc, dec) × 2 (10)

Stuff the arms lightly (about ⅔ full).
Fold the top flat and crochet across both sides to close.
Fasten off and set aside.

🦵 Legs, Body & Head (Worked in One Piece)

Legs (make 2)

With main color:

R1: 6 sc in MR (6)
R2: inc × 6 (12)
R3: (1 sc, inc) × 6 (18)
R4: (5 sc, inc) × 3 (21)
R5: (6 sc, inc) × 3 (24)
R6: (7 sc, inc) × 3 (27)

Change to pants color:

R7–9: 27 sc (3 rounds)

Fasten off only the first leg.
Do not cut yarn on the second leg.

Joining Legs & Body

From the second leg, chain 3 and join to the first leg.

R10:

• 27 sc around first leg
• 3 sc into chains
• 27 sc around second leg
• 3 sc into chains (60)

R11: (27 sc, inc, 1 sc, inc) × 2 (64)
R12: 64 sc
R13: (31 sc, inc) × 2 (66)
R14–17: 66 sc (4 rounds)
R18: (9 sc, dec) × 6 (60)
R19–20: 60 sc (2 rounds)
R21: (8 sc, dec) × 6 (54)

Slip stitch and cut pants yarn.

Upper Body (Main Color)

Attach main color yarn at the back of the body.

R22: (7 sc, dec) × 6 (48)
R23: BLO – 48 sc
R24: 48 sc
R25: (6 sc, dec) × 6 (42)
R26: 42 sc
R27: (5 sc, dec) × 6 (36)
R28: 36 sc
R29: (4 sc, dec) × 6 (30)
R30: (3 sc, dec) × 6 (24)
R31–32: 24 sc (2 rounds)

Attach Arms

R33: Attach arms on the sides while crocheting
(2 sc, dec) × 6 (18)

Head

R34: inc × 18 (36)
R35: (5 sc, inc) × 6 (42)
R36: (6 sc, inc) × 6 (48)
R37: (7 sc, inc) × 6 (54)
R38: (8 sc, inc) × 6 (60)
R39: (9 sc, inc) × 6 (66)
R40: (10 sc, inc) × 6 (72)
R41–48: 72 sc (8 rounds)

Insert safety eyes between R44 and R45, spacing evenly.

R49: (10 sc, dec) × 6 (66)
R50: (9 sc, dec) × 6 (60)
R51: (8 sc, dec) × 6 (54)
R52: (7 sc, dec) × 6 (48)
R53: (6 sc, dec) × 6 (42)
R54: (5 sc, dec) × 6 (36)
R55: (4 sc, dec) × 6 (30)
R56: (3 sc, dec) × 6 (24)
R57: (2 sc, dec) × 6 (18)
R58: (1 sc, dec) × 6 (12)
R59: dec × 6 (6)

Stuff firmly.
Fasten off and close opening.

👂 Ears (make 2)

R1: 6 sc in MR (6)
R2: inc × 6 (12)
R3: (3 sc, inc) × 3 (15)
R4: (4 sc, inc) × 3 (18)
R5–7: 18 sc (3 rounds)

Fasten off, leave long tail for sewing.

👃 Muzzle

With white yarn:

R1: 6 sc in MR (6)
R2: inc × 6 (12)
R3: (1 sc, inc) × 6 (18)
R4: (2 sc, inc) × 6, 1 sc, sl st

Fasten off, leave tail.
Embroider nose with black yarn.

👖 Pants Strap

Attach pants color yarn to the front loop of Round 23, slightly off-center.

R1: FLO – sc in each stitch around, sl st
Do not cut yarn.

Chain 28–30 (adjust as needed).
Attach strap to the front of pants with sl st.
Fasten off and weave in ends.

Sew a small button to the front for decoration.

✨ Finishing

• Sew ears to the sides of the head
• Sew muzzle centered below the eyes
• Weave in all loose ends

Your teddy bear in pants is now complete 🧸💙

© COPYRIGHT & USAGE

This pattern is written exclusively for amigurumi.badoomobile.net.
You may sell finished toys made from this pattern.
Please do not redistribute or resell the pattern itself.

🎨 Finished Amigurumi Teddy Bear in Pants– Color Variations and Accesories