Materials
Size 6 chenille yarn in white, tan, and brown (1 used Loops & Threads) Size 6mm/6.5mm
crochet hook
15mm safety eyes Stuffing Sewing/Embroidery
needle
Scissors
Stitch Marker

Abbreviations:
• mr: magic ring
• sc: single crochet
• inc: increase
• dec: invisible decrease
c1 : tan
c2: brown
c3: white
Note: The text will be the same color as the stitches (ex 6sc = 6sc in tan)

Amigurumi Turtle Cinnamon Roll Free Pattern:

Shell/Body
In Mr:
RI – 4sc, 2sc (6)
R2 – 2inc, 4inc (12)
R3 – (1sc, 1inc)x2, (1sc, 1inc)x4 (18)
R4 – (1sc, 1inc)x3, (1sc, 1inc)x6(27)
R5 – (1sc, 2inc)x3, (1sc, 2inc)x6 (45)
R6 – (4sc, 1inc)x3, (4sc, 1inc)x6 (54)
R7 – 18sc, 36sc (54)
R8 – 12 – 54sc (54) (5 rounds)
R13 – (2sc, 2dec)x9 (36)
R14 – (2sc, 2dec)x6 (24)
RI5 – (1sc, 1dec)x8 (16)
Stuff Firmly
R16 – (2sc, 1dec)x4 (12)
Finish Stuffing
R17 – 6dec (6)
Add a white drizzle to the top of your cinnamon bun
White doing the inc rounds, the previous stitches may ruffle up, but this will go away once stuffed firmly.
If using thinner or worsted yarn, there may be some gapping.

Head
RI-6sc in Mr (6)
R2 – 6inc (12)
R3-(1sc, 1inc)x6 (18)
R4-(2sc, 1inc)x6 (24)
R5-7 – 24sc (24)
Place safety eyes in rounds 4-5 approximately 8 visible stitches apart (opposite sides of head)
R8 – (2sc, 1dec)x6 (18)
Start stuffing
R9-(1sc, 1dec)x6 (12)
Finish stuffing
RIO – 6dec (6)
Fo and leave a long tail for sewing

Front Fins (2x)
R1: 8sc in MR (8)
R2: 8inc (16)
R3: (1sc, 1inc)x8 (24)
R4: (2sc, 1inc)x8 (32)
R5: (3sc, 1inc)x8 (40)
Fold in half and sc across in white

Back Fins (x2)
R1: 6sc in MR (6)
R2: 6inc (12)
R3: (1sc, 1inc)x6 (18)
R4: (2sc, 1inc)x6 (24)
R5: (3sc, 1inc)x6 (30)
Fold in half and sc across in white.
Tip: while doing the single crochet’s across, carry the brown yarn from the main part of the fin to the end for an easier switch back to brown for sewing.

Assembly
Head: Sew on the sc rounds of the body in brown color.

Front Fins: Sew in R9, 4 visible stitches away from the head.

Back Fins: Sew in R9, 2 visible stitches away from the tip of the front fin.

More Amigurumi Turtle Ideas:

Materials
• Amigurumi yarn, colors 4094 (centin) and 5741 (parakeet)
• Black embroidery thread
• 2.2 mm needle
• Little eyes with safety lock n. 7
• Acrylic fiber (filler)
• Thin upholstery needle

Abbreviations
MR– magic circle
Sc– single crochet
Flo– Front loop only
Inc– increase
Dec– decrease
Ch – chain
Difficulty level: Easy

Amigurumi Crochet Turtle Meg Free Pattern:

Head
Start with the green line:
Rnd 1. 8 sc at the MR
Rnd 2. 8 inc – 16 sc
Rnd 3. 1 sc, 1 inc (x 8) – 24 sc
Rnd 4. 2 sc, 1 inc (x 8) – 32 sc
Rnd 5. 3 sc, 1 inc (x 8) – 40 sc
Rnd 6-9. 1 sc about each sc – 40 sc
Rnd 10. 5 sc, 1 dec, 5 sc, 1 dec, 10 sc, 1 inc, 10 sc, 1 inc, 4 sc – 40 sc
Rnd 11-13. 1 sc about each sc – 40 sc
Rnd 14. 3 sc, 1 dec (x 8) – 32 sc
Rnd 15. 32 sc
Rnd 16. 2 sc, 1 dec (x 8) – 24 sc.
Rnd 17. 1 sc, 1 dec (x 8) – 16 sc
Rnd 18. 2 sc, 1 dec (x 4) – 12 sc
Rnd 19-22. 1 sc about each sc – 12 sc
Rnd 23. Close with 6 sc, and leave long thread for sewing.
Fold rows 19 to 23 to the back of the head, and sew on the sides of the head with a thread of the same color to help support it. Row 23 will be sewn to the shell at an opportune time.

Place the safety eyes between rows 11 and 12, where you made the dec.
Put the filling from row 16 onwards, adding more as you weave. Do not fill the 12 sc rows.
Optional: make the expression on the little face, squinting the eyes, and embroider with black embroidery thread, the eyelashes and eyebrows.

Shell
Use satin color:
Top:
Rnd 1. 6 sc at the MR
Rnd 2. 6 inc- 12 sc
Rnd 3. 1 sc, 1 inc x 6- 18 sc
Rnd 4. 2 sc, 1 inc x 6- 24 sc
Rnd 5. 3 sc, 1 inc x 6- 30 sc
Rnd 6. 4 sc, 1 inc x 6- 36 sc
Rnd 7-8. 36 sc
Rnd 9. in FLO, crochet lace (1sc, 1ch) all the way around.

Cut the thread, finish and set aside

Lower part:
Rnd 1. 6 sc at the MR
Rnd 2. 6 inc- 12 sc
Rnd 3. 1 sc, 1 inc x 6- 18 sc
Rnd 4. 2 sc, 1 inc x 6- 24 sc
Rnd 5. 3 sc, 1 inc x 6- 30 sc
Rnd 6. 4 sc, 1 inc x 6- 36 sc
Rnd 7-8. 36 sc

End and leave a long thread to sew.

Little paws
;Front paws (2x), in green:
Rnd 1. 6 sc at the MR
Rnd 2. 2 sc, 1 inc(x2)- 8 sc
Rnd 3. 8 sc
Rnd 4. 3 sc, 1 inc- 10 sc
Rnd 5. 4 sc, 1 inc- 12 sc
Rnd 6. 5 sc, 1 inc- 14 sc
Rnd 7. 14 sc
Rnd 8. close with 6 sc
End and leave a long thread for sewing.

Back paws (2x), in green:
Rnd 1. 6 sc at the MR
Rnd 2. 2 sc, 1 inc (x2)- 8 sc
Rnd 3. 8 sc
Rnd 4. 3 sc, 1 inc- 10 sc
Rnd 5. 4 sc, 1 inc- 12 sc
Rnd 6. 12 sc
Rnd 7. close with 5 sc
End and leave a long thread for sewing.

Little Tail
Do in green:
Rnd 1. 4 sc at the MR
Rnd 2. 1 sc, 1 inc (x2)- 6 sc
Rnd 3-6. 6 sc
Rnd 7. close with 3 sc

Leave a long thread for sewing, finish and set aside.

Assembly
Position the turtle parts on the upper shell, with the head facing the tail, front paws one on each side of the head, the hind paws one on each side of the tail. Sew the parts in the loops left over from row 9 at the top of the hull. Position the bottom of the hull, and sew in the same place where the head and limbs were sewn. Gradually add filling, until the hull becomes “fat” and very firm. Fasten and hide the thread. With wire in the same color as the hull, make a few stitches, fastening the head to the hull, so that it stands upright. Take care not to appear on the sides of the turtle… There are only about 3 or 4 little dots, just so that the little head doesn’t get slack or fall forward.

More Amigurumi Turtle Ideas:

Materials and tools
• Yarn:
– Alize Cotton Gold 100g/330m, color #385 (pistachio), #55 (white)
– YarnArt Jeans 50g/160m, color #40 (brown), #54 (navy blue)
• Hook number 2
• Filler – holofiber
• Beads for eyes with a diameter of 6 mm
• Thick sewing needle, scissors, pins, knitting marker
• A little black, white, pink thread for embroidery of the muzzle
• Buttons with a diameter of 6mm, satin ribbon – for decor

Abbreviations
MR- Magic ring
Sc- Single crochet
Ch- Chain
Inc- Increase
Dec- Decrease
Sl st- Slip stitch
Dc- Double crochet
BLO- Back loop only
FLO- Front loop only
• Using the specified materials, the size of the finished crochet amigurumi toy is approximately 13.5 cm.

Amigurumi Crochet Turtle Free Pattern:

Head
Stuff tightly while crocheting.

Rnd 1: 6 sc in MR
Rnd 2: inc in each loop (12sc)
Rnd 3: (1sc, inc)*6 (18sc)
Rnd 4: 1sc, inc, (2sc, inc)*5, 1 sc (24sc)
Rnd 5: (3sc, inc)*6 (30sc)
Rnd 6: 2sc, inc, (4sc, inc)*5, 2sc (36sc)
Rnd 7: (5sc, inc)*6 (42sc)
Rnd 8: 3sc, inc, (6sc, inc)*5, 3sc (48sc)
Rnd 9-16: 48sc (8 row)
Rnd 17: 3sc, dec, (6sc, dec)*5, 3sc (42sc)
Rnd 18: (5sc, dec)*6 (36sc)
Rnd 19: 2sc, dec, (4sc, dec)*5, 2sc (30sc)
Rnd 20: (3sc, dec)*6 (24sc)
Rnd 21: 1sc, dec, (2sc, dec)*5, 1sc (18sc)

Fasten and cut the thread, hide the tip of the thread inside the head.

Body
Start crocheting with pistachio color. Stuff firmly in the process knitting.

Rnd 1: 6 sc in MR
Rnd 2: 6 inc (12sc)
Rnd 3: (1sc, inc)*6 (18sc)
Rnd 4: 1sc, inc, (2sc, inc)*5, 1sc (24sc)
Rnd 5: (3sc, inc)*6 (30sc)
Rnd 6: 2sc, inc, (4sc, inc)*5, 2sc (36sc)
Rnd 7: (5sc, inc)*6 (42sc)
Rnd 8-11: 42sc (4 rows)
Change the thread color to white cut the pistachio thread.
Rnd 12: 42sc
Rnd 13: behind the back wall of the loop 42sc
Change the color of the thread to dark blue, do not cut the white thread.
Rnd 14: (5sc, dec)*6 (36sc)
Rnd 15: 36sc
Change the thread color to white.
Rnd 16: 36sc
Rnd 17: 2sc, dec, (4sc, dec)*5, 2sc (30sc)
Change the thread color to dark blue.
Rnd 18-19: 30sc (2 rows)
Change the color of the thread to white, cut off the dark blue thread.
Rnd 20: (3sc, dec)*6 (24sc)
Rnd 21: 24sc
Change the color of the thread to pistachio, cut off the white thread.
Rnd 22: 1sc, dec, (2sc, dec)*5, 1sc (18sc)
Rnd 23: 18sc

Fasten the thread, cut, leaving a long end for sewing.

Arms (Make 2)
Tie two pieces. Stuff approximately to the middle (the top part does not need to be stuffed). Start crocheting in brown.

Rnd 1: 6 sc in MR
Rnd 2: 6 inc (12sc)
Rnd 3: (3sc, inc)*3 (15sc)
Change the thread color to pistachio, Cut off the brown thread.
Rnd 4: behind the back wall of the loop 15 sc
Rnd 5: 15 sc
Rnd 6: dec, 6sc, dec, 5sc (13sc)
Rnd 7: 13 sc
Rnd 8: dec, 5sc, dec, 4sc (11sc)
Rnd 9-11: 11 sc (3 rows)
Rnd 12: dec, 4sc, dec, 3sc (9sc)

Work 4 more sc (or whatever number of sc you need to so that when sewing on the handle, the color change is on the inside).
Fold the edges of the part together, crochet 4sc.
Fasten the thread, cut, leaving a long end for sewing.

Legs (Make 2)
Tie two pieces. tight fill in the process of crocheting, fill the top a little weaker (so that the legs are not strong stuck out when sewing). Start crocheting in brown.

Rnd 1: 6 sc in MR
Rnd 2: 6 inc (12sc)
Rnd 3: (1sc,inc)*6 (18sc)
Change the color of the thread to pistachio, cut off the brown thread.
Rnd 4: behind the back wall of the loop 18 sc
Rnd 5: 18 sc
Rnd 6: (dec, 7sc)*2 (16sc)
Rnd 7: 16sc
Rnd 8: (dec, 6sc)*2 (14sc)
Rnd 9-11: 14sc (3 rows)
Rnd 12: (dec, 5sc)*2 (12sc)
Rnd 13-15: 12sc (3 rows)
Rnd 16: (dec, 4sc)*2 (10sc)
Rnd 17: (dec,3sc)*2 (8sc)

Fasten the thread and cut, leaving a long tip, with which pull off the remaining hole. Hide the tail of the thread inside the legs.

Design and assembly
Make a muzzle. First, make tightenings, focusing on the photo. For this mark with pins the location of the peephole (in the photo stitch 1 and 2), which are located between 12 and 13 side by side, the distance between the stitch is 8sc. Visually mark stitch 3 and 4 which are located on a distance of 1sc from stitch 1 and 2, respectively.

Insert a long needle and thread into the base of the head and bring it out into stitch 1. Then insert the needle into stitch 3 and bring to the base of the head. For strength can be repeated tightening one more time.

Do the same for the second eyes, but in this case from the base head, bring the needle out at stitch 2. Then insert the needle at stitch 4 and bring it back to the base. Pull the ends and tie a knot.

Sew on eyes in places of tightening – beads. Make white thread stitches around the peephole to look became more “alive”. Above embroider with black thread eyebrows, pink – cheeks (below eye level, between 14 and 15 nearby).

Pin the head to head.

Sew firmly in a circle, and when there will be a small hole add more filler between head and neck, then sew up to end.

Between 6 and 7 next to the torso mark the places where legs are located. Sew them on with using a thread fastener. In use the same as a thread yarn with which the body was crocheted.

Skirt
Attach a white thread and crochet for the front half loops of the 12th row. Crochet in a circle, each row starting with lifting loops and ending with sl-st.

Rnd 1: 3ch, inc from dc in each loop (84 dc)
Rnd 2-3: 3ch, 84 dc (84 dc)
Rnd 4: 1ch, 84sc (84sc)
Fasten the thread, cut off, hide the tip of the thread.

Between 20 and 21 side by side sew the handles symmetrically.
Sew on front for decoration. Decorative buttons.

Shell
Bottom part:
Rnd 1: 6 sc in MR
Rnd 2: 6 inc (12sc)
Rnd 3: (1sc, inc)*6 (18sc)
Rnd 4: 1sc, inc, (2sc, inc)*5, 1sc (24sc)
Rnd 5: (3sc, inc)*6 (30sc)
Rnd 6: 2sc, inc, (4sc, inc)*5, 2sc (36sc)
Rnd 7: (5sc, inc)*6 (42sc)
Finish crochet sl st, fasten the thread, cut off, hide the tip of the thread.

Top part:
Rnd 1: 6 sc in MR
Rnd 2: 6 inc (12sc)
Crochet the third and all subsequent rows behind the back wall of the loop.
Rnd 3: (1sc, inc)*6 (18sc)
Rnd 4: 1sc, inc, (2sc, inc)*5, 1 sc (24sc)
Rnd 5: (3sc, inc)*6 (30sc)
Rnd 6: 2sc, inc, (4sc, inc)*5, 2sc (36sc)
Rnd 7: (5sc, inc)*6 (42sc)
Rnd 8-9: 42sc (2 rows)
Do not cut the thread, but continue crocheting.

Fold the two parts of the shell wrong side inward and connect, crocheting 42 sc. When there is a small hole left, put it inside filler, do not stuff too tightly. Continue crocheting and close hole to the end, do not cut the thread.

Dial a chain of 20 ch, count 10 sc on the shell and in the 11th sc attach the chain with a connecting post. Fasten the thread and cut off. From the first stitch (where they began to crochet a chain from ch) count 8sc and attach a new thread to this loop. Tie and attach the second strap in the same way.

Try on the shell on the back, it should hold well (if the shell dangles or, conversely, is difficult to put on, change the number of ch in straps).
Hide all the ends of the threads inside.

Hat
Rnd 1: 6 sc in MR
Rnd 2: 6 inc (12sc)
Rnd 3: (1sc, inc)*6 (18sc)
Rnd 4: 1sc, inc, (2sc, inc)*5, 1 sc (24sc)
Rnd 5: (3sc, inc)*6 (30sc)
Rnd 6: 2sc, inc, (4sc, inc)*5, 2sc (36sc)
Rnd 7: (5sc, inc)*6 (42sc)
Rnd 8: BLO 42sc
Rnd 9: 42sc
Rnd 10: 3sc, inc, (6sc, inc)*5, 3sc (48sc)
Rnd 11: 48sc
Rnd 12: (7sc, inc)*6 (54sc)
Rnd 13: 54sc
Rnd 14: FLO (2sc, inc)*18 (72sc)
Rnd 15: 72sc
Rnd 16: (11sc, inc)*6 (78sc)
Rnd 17: 6sc, inc, (12sc, inc)*5, 6sc (84sc)
Rnd 18-19: 84sc (2 rows)

Fasten the thread, cut off, hide the tip of the thread.
For ties from the inside of hat to the back half loops of the 13th row sew (or tie) satin ribbons.

Congratulations!
Your little crochet turtle is ready!

More Amigurumi Turtle Ideas:

You will need:
– YarnArt Jeans or Alize Cotton Gold yarn
– 2.0 mm crochet hook
– 7 mm safety eyes
– Black embroidery floss for mouth, pink for cheeks, white for eye whites
– Sewing needle and scissors
– Fiberfill

Amigurumi Cute Turtle Free Pattern:

Rim of the turtle’s shell
Go back to the brown color yarn (18 rnd) and crochet 60 sc around from the front loops (FLO).

More Amigurumi Turtle Ideas:

You will need:
– YarnArt Jeans yarn (55% cotton, 45% acrylic, 50 g/160 m)
– 1.5-1.75 mm crochet hook
– 4 mm black beads for eyes
– Colorful button for decoration
– Sewing thread, needle and scissors
– Fiberfill

Abbreviations:
R – row
ch – chain
sl st – slip stitch
sc – single crochet
inc – increase (2 sc in one stitch)
dec – decrease (2 sc together)
[…] – number of stitches you should have at the end of the row
(…) – repeat whatever is between the brackets the given number of times

Amigurumi Crochet Turtle Free Pattern:

Head
With main color:
R 1: 6 sc in magic ring [6]
R 2: (inc) repeat 6 times [12]
R 3: (1 sc, inc) repeat 6 times [18]
R 4: (2 sc, inc) repeat 6 times [24]
R 5: (3 sc, inc) repeat 6 times [30]
R 6: (4 sc, inc) repeat 6 times [36]
R 7-12: 36 sc (6 rows)
Insert safety eyes between R 7 and R 8 at the distance of 15 sc from each other.
R 13: (4 sc, dec) repeat 6 times [30]
R 14: 30 sc
R 15: (3 sc, dec) repeat 6 times [24]
R 16: (2 sc, dec) repeat 6 times [18]
R 17-18: 18 sc (2 rows)
R 19: (4 sc, dec) repeat 3 times [15]
R 20: Fold the top opening flat and 7 sc through both sides.
Fasten off and leave a long tail for sewing.

Front Legs (make 2)
With main color:
R 1: 6 sc in magic ring [6]
R 2: (inc) repeat 6 times [12]
R 3: (1 sc, inc) repeat 6 times [18]
R 4: (2 sc, inc) repeat 6 times [24]
R 5: (3 sc, inc) repeat 6 times [30]
R 6: (4 sc, inc) repeat 6 times [36]
R 7: Fold the leg flat and 18 sc through both sides.
R 8: (sl st, 1 ch) in every stitch to the end of row
Fasten off and leave a long tail for sewing.

Hind Legs (make 2)
With main color:
R 1: 6 sc in magic ring [6]
R 2: (inc) repeat 6 times [12]
R 3: (1 sc, inc) repeat 6 times [18]
R 4: (2 sc, inc) repeat 6 times [24]
R 5: Fold the leg flat and 12 sc through both sides.
R 6: (sl st, 1 ch) in every stitch to the end of row
Fasten off and leave a long tail for sewing.

Shell Bottom
With yellow color:
R 1: 6 sc in magic ring [6]
R 2: (inc) repeat 6 times [12]
R 3: (1 sc, inc) repeat 6 times [18]
R 4: (2 sc, inc) repeat 6 times [24]
R 5: (1 sc, inc) repeat 12 times [36]
R 6: (5 sc, inc) repeat 6 times [42]
Fasten off.

Shell
With purple color:
R 1: 6 sc in magic ring [6]
R 2: (inc) repeat 6 times [12]
R 3: (1 sc, inc) repeat 6 times [18]
R 4: (2 sc, inc) repeat 6 times [24]
R 5: (3 sc, inc) repeat 6 times [30]
R 6: (4 sc, inc) repeat 6 times [36]
R 7: (5 sc, inc) repeat 6 times [42]
R 8-12: 42 sc (5 rows)
Fasten off and leave а long tail (about 70-80 cm (27-31″)).

Put the shell and the shell bottom together and crochet 42 sc through both parts around the edges. Put some stuffing inside the shell before you finish.

Assembly
Sew the head and legs to the shell.
Sew the decoration button on the shell.

More Amigurumi Turtle Ideas:

Materials
Yarn Color
• (A) green : YarnArt Jeans 11 (50g, 160m)
• (B) brown : YarnArt Jeans 40 (50g, 160m)
• (C) purple : Alize Cotton Gold 649 (100g, 330m)
• (D) skin color : YarnArt Jeans 73 (50g, 160m)
Other Materials
• Crochet hook size 2-2.5mm
• Knitting needles size 3.5-4mm
• 1 wooden button
• Brown and pink thread
• Tapestry needles, pins, stitch markers, scissors

Abbreviations
Ch – Chain
Sc – Single Crochet
Inc – Single Crochet Increase
Dec – Single Crochet Decrease
Hdc – Half Double Crochet
Slst – Slip Stitch
Mr – Magic Ring
Dc – Double Crochet
Tr – Treble Crochet
(…) Work all stitches in the same stitch
[ ]…x Repeat instructions in
brackets…times
Bobble – Bobble Stitch
BLO – Back loop only
FLO – Front loop only
Rnd – Round
Sts – Stitches

Amigurumi Cute Small Turtle Free Pattern:

Legs (make 2)
(Yarn A)
Rnd-sts
1 sc 6 into a magic loop (6)
2 [sc 1, inc] 3x (9)
3 [sc 2, inc] 3x (12)
4 [sc 3, inc] 3x (15)
Break the yarn, make the second leg in the same way, but don’t break the yarn this time. Connect 2 legs together: sc 15 (leg 1) + sc 15 (leg 2) = 30. Move to the Body part.

Body
(Yarn A)
Rnd-sts
1 [sc 4, inc] 6x (36)
2-7 sc 36 (6 rows) (36)
8 [sc 4, dec] 6x (30)
9 sc 30 (30)
10 [sc 3, dec] 6x (24)
11 sc 24 (24)
12 [sc 2, dec] 6x (18)
13-16 sc 18 (4 rows) (18)
Break the yarn with a long rest. Stuff.

Arms (make 2)
(Yarn A)
Rnd-sts
1 sc 6 into a magic loop (6)
2 [sc 1, inc] 3x (9)
3-7 sc 9 (5 rows) (9)
4 dec 1, sc 7 (8)
5 dec 1, sc 6 (7)
6 dec 1, sc 5 (6)
Break the yarn with a long rest. Stuff slightly. Sew 2 edges together.

Head;
(Yarn A)
Rnd-sts
1 sc 6 into a magic loop (6)
2 inc 6 (12)
3 [sc 1, inc] 6x (18)
4 [sc 2, inc] 6x (24)
5 [sc 3, inc] 6x (30)
6 [sc 4, inc] 6x (36)
7 [sc 5, inc] 6x (42)
8 [sc 6, inc] 6x (48)
9 [sc 7, inc] 6x (54)
10 sc 54 (54)
11 [sc 8, inc] 6x (60)
12-19 sc 60 (8 rows) (60)
20 [sc 8, dec] 6x (54)
21 sc 54 (54)
22 [sc 7, dec] 6x (48)
23 [sc 6, dec] 6x (42)
24 [sc 5, dec] 6x (36)
25 [sc 4, dec] 6x (30)
26 [sc 3, dec] 6x (24)
27 [sc 2, dec] 6x (18)
Break the yarn with a long rest to sew later. Stuff.

Backpack
(Yarn C)
Backpack Bottom
Rnd-sts
1 sc 6 into a magic loop (6)
2 inc 6 (12)
3 [sc 1, inc] 6x (18)
4 [sc 2, inc] 6x (24)
5 [sc 3, inc] 6x (30)
6 [sc 4, inc] 6x (36)
Break the yarn with a long rest to sew.

Backpack Body   
Rnd-sts
1 sc 6 into a magic loop (6)
2 inc 6 (12)
3 [sc 1, inc] 6x (18)
4 [sc 2, inc] 6x (24)
5 [sc 3, inc] 6x (30)
6 [sc 4, inc] 6x (36)
7-10 sc 36 (4 rows) (36)
Break the yarn with a long rest to sew. Slightly stuff. Use the tapestry needle to connect the backpack bottom and body into 1 piece.

Backpack Straps (make 2)
Rnd-sts
1 ch 20, start on the 2nd stitch from the hook (20)
2 hdc 19 (19)
Break the yarn with a long rest to sew. Use the tapestry needle to connect the straps onto the backpack.

Spot (make 6)
(Yarn B)
Rnd-sts
1 sc 6 into a magic loop (6)
Use the tapestry needle to sew spots to the head.

Scarf
(Yarn D, Using Knitting Needles)
Rnd-sts
1 Cast on 6 st (6)
2 K6 (6)
3 P6 (6)
Repeat Rnd 2 and 3 till you reach 13cm then cast off, break the yarn, hide the remaning yarn. Use the tapestry needle to attach the wooden button to the scarf.
• Use brown thread to embroider the eyes, and the mouth. (as photo below)
• Use pink thread to embroider the cheeks.
• Use ivory white thread to embroider the backpack to make it look like a turtle shell.

More Amigurumi Turtle Ideas:

Materials
• 2 mm crochet hook,
• 2 different yarns calling for 2 mm hook (white and blue),
• some red yarn for making the mouth,
• 2 black safety amigurumi eyes,
• soft stuffing,
• tapestry needle.

Abbreviations
ch = chain (s)
rnd(s) = round (s)
sc = single crochet
sl st = slip stitch

Also: If you prefer to work continiously, you should use a stitch marker. But if not, you should do 1 ch in the beginning of each round and close each round with a sl st (I used to work this way). Lets start.

Amigurumi Turtle Free Pattern:

Head
color 1 (white)
Start with the magic ring with 6 sc – 1rnd.
2 rnd: 2 sc in next sc (12)
3 rnd: [1 sc in next 2 sc, 2 sc in next sc] x 4 times (16)
4 rnd: 1 sc in next 5 sc, 2 sc in next 6 sc, 1 sc in next 5 sc (22)
5 rnd: 1 sc in each next sc (22)
6 rnd: 1 sc in each next sc (22)
7 rnd: 1 sc in next 5 sc, [sc2 tog] x 6 times, 1 sc in next 5 sc (16)
8 rnd: 1 sc in each next sc (16)
9 rnd: [1 sc in next 2 sc, sc2tog] x 4 times (12)
10 rnd: 1 sc in next sc (12)
11 rnd: 1 sc in next sc (12)
12 rnd: [1 sc in next sc, sc2tog] x 4 times (8)
13 to 15 rnds: 1 sc in each next sc (8) – total 3 rnds
Fasten off.
Finishing the head:
1. Place eyes centered between rnds 4 and 5, in a distance about 1/3 of all circle.
2. Make the mouth with some red yarn (centered between rnds 5 and 6,
width of mouth is about 2 sc).
3. Stuff the head generally at the top, reducing the filling on the bottom.

Legs x 4
color 1 (white)
Start with the magic ring with 6 sc – 1rnd.
2 to 6 rnds: 1 sc in each next sc (6) – total 5 rnds
Fasten off.

Tail
color 1 (white)
Start with the magic ring with 6 sc – 1rnd.
2 to 6 rnds: 1 sc in each next sc (6) – total 5 rnds
Fasten off.

Shell
The shell consists of two parts: the upper and lower.

Upper part
color 2 (blue)
Start with the magic ring with 6 sc – 1rnd.
2 rnd: 2 sc in next sc (12)
3 rnd: [1 sc in next sc, 2 sc in next sc] x 6 times (18)
4 rnd: [1 sc in next 2 sc, 2 sc in next sc] x 6 times (24)
5 rnd: [1 sc in next 3 sc, 2 sc in next sc] x 6 times (30)
6 to 11 rnds: 1 sc in each next sc (30)
Color scheme for 6 – 11 rnds:
6 rnd:  color 1 (white)
7 – 8 rnds: color 2 (blue)
9 rnd: color 1 (white)
10 rnd: color 2 (blue)
11 rnd: color 1 (white)
Join color 2 (blue)
12 rnd: 2 sc in each next sc (60)
Fasten off.

Bottom part
color 1 (white)
Start with the magic ring with 6 sc – 1rnd.
2 rnd: 2 sc in next sc (12)
3 rnd: [1 sc in next sc, 2 sc in next sc] x 6 times (18)
4 rnd: [1 sc in next 2 sc, 2 sc in next sc] x 6 times (24)
5 rnd: [1 sc in next 3 sc, 2 sc in next sc] x 6 times (30)
6 rnd: 1 sc in each next sc.
Fasten off.

Finishing the Turtle
Stuff the top of the shell and start sewing all parts together with color 1 (white)
Use pins to hold together all the pieces before sewing.
Fasten off and weave all the yarn.

More Amigurumi Turtle Ideas:

The size of the toy: 15cm

MATERIALS:
– Yarn: cream, dark green, dark green and light green marbled, straw, orange and orange-beige under the marble, purple flowers
– Hook: 3mm
– Cotton fabric
– Felt, wire, beads, artificial flowers, a branch, buttons, feather, ribbon
– Black eyes: 10mm
– Filler
– Needle for sewing
– Marker

ABBREVIATIONS:
VP – air loop
RLS – column without crochet
SSBN – half-column without crochet (connecting post)
ПССН – полустолбик with накидом
STSN – column with crochet
2 SBN in the next. to increase in value
2СБН to tie together – decrease

NOTES:
– It is recommended to start all the rows with the amigurumi ring.
– Knit in a spiral, the rows do not join / rotate,
unless otherwise specified.
– Mark at the beginning of the rows with a marker
(you can thread or a small pin).

Amigurumi Turtle Lovers Free Pattern

HEAD:
1 row: 6 sc (6)
2 series: (2 sc in each n.) X 6 times (12)
3rd row: (1 sc, 2 sc in the next section) x 6 times (18)
4th row: (2 sc, 2 sc in the next section) x 6 times (24)
5 series: (3 sc, 2 sc in the next section) x 6 times (30)
6 row: (4 sc, 2 sc in the next section) x 6 times (36)
7-9 series: 36 SBN in a circle (36)
10 series: 5 sc, 2 sc in the next. etc., 1CBN, 2 SBN in the next. etc., 1CBN, 2 SBN in the next. n., 1СБН, 2СБН in the next. etc., 1CBN, 2 SBN in the next. etc., 22CBN (41)
11th row: 5 sc, 2 sc in the next. p., 2СБН, 2СБН in the next. Sec., 2CBN, 2 SBN in the next. p., 2СБН, 2СБН in the next. Sec., 2CBN, 2 SBN in the next. etc., 23СБН (46)
12th row: 46 sc in a circle (46)
13 series: 2 RLS tie together, 4СБН, 2СБН tie together,
1СБН, 2 RLS to tie together, 1СБН, 2СБН to tie together, 1СБН, 2СБН to tie together, 1СБН, 2 RLS to tie together, 4СБН, 2СБН to tie together, 4СБН, 2СБН to tie together, 4СБН, 2 RLS to tie together, 4СБН, 2СБН to tie together, 2СБН (36)
14 series: 2 RLS tie together, 3СБН, (2СБН to tie together) х 5 times, 3СБН, 2СБН to tie together, 3СБН, 2СБН to tie together, 3СБН, 2 СБН to tie together, 3СБН, 2СБН to tie together, 1СБН (26)
Attach the eyes, fill the filler.
15 series: 2 RLS tie together, 2СБН, 2СБН tie together, 2СБН, 2 СБН to tie together, 2СБН, 2СБН to tie together, 2СБН, 2СБН to tie together, 2СБН, 2 СБН to tie together, 2СБН, 2SBN tie together (19)
16 series: 3СБН, 2СБН to tie together, 3СБН, 2СБН to tie together, 3СБН, 2СБН to tie together, 3СБН, 2 RLS to tie together (15)
17-19 series: 15 CBN in a circle (15)
Finish the work, leave the thread for stitching, fill filler.

LEGS (2 parts):
1 row: 6 sc (6)
2 row: (2 CBN in each p.) X 6 times (12)
3rd row: (2CBN next, 1CBN) x 6 times (18)
4-5 series: 18 CBN in a circle (18)
Sew pegs to the soles of the feet.

6 series: 2SBN tie together, 1СБН, 2СБН to tie together, 1СБН, 2СБН to tie together, 10СБН (15)
7th row: 15SBN in a circle (15)
8 series: 2SBN tie together, 1SBN, 2SBN tie together, 1СБН, 2СБН to tie together, 1СБН, 2СБН to tie together, 1СБН, 2СБН to tie together, 1 SBN (10)
9-12 series: 10 CBN in a circle (10)
Finish the work of only one leg. Start packing.
We connect two legs and begin to knit the body:

Stage 4: insert the hook into the 10th point of the second leg and in the 6th point of the first legs, tie, connecting the first and second legs (back of the legs). Get 18 posts. Fill the feet with filler.
1 row: 18 CBN in a circle (18)
2 series: (2СБН in the next section, 2СБН) х 6 times (24)
3rd row: (2CBN next, 3CBN) x 6 times (30)
4-6 series: 30 CBN in a circle (30)
7th row: (2CBN next track, 4CBN) x 6 times (36)
8-9 series: 36 SBN in a circle (36)
10th row: (2SBN tie together, 4SBN) x 6 times (30)
11-13 series: 30 CBN in a circle (30)
14 series: (2CBN tie together, 3CBN) x 6 times (24)
15-16 series: 24 CBN in a circle (24)
17 row: (2CBN tie together, 2CBN) x 6 times (18)
18th row: 18SBN in a circle (18)
19 series: (2CBN tie together, 4СБН) х 3 times (15)
Finish the job.

HANDS (2 parts):
1 row: 6 CBN (6)
2 series: (2СБН in each item) х 6 times (12)
3 ranks: 12СБН on a circle (12)
4 series: 2SBN tie together, 3SBN, 2SBN tie together, 3СБН, 2СБН to tie together (9)
5-13 series: 9 CBN in a circle (9)
Fold the row and tie it through both of the RLS layer. Finish the work, leave the thread for stitching.

TORTOICH PANCIER:
For Mr. Tortoise, start with a green thread.
For Mrs. Turtle with orange thread.
1 row: 6 CBN (6)
2 row: (2 CBN in each p.) X 6 times (12)
3 row: (2СБН next, 1СБН) х 6 times (18) 4 row: (2СБН next, 2СБН) х 6 times (24) 5 row: (2СБН in the next section, 3СБН ) x 6 times (30)

We change the color of the thread to dark green and light green yarn for marble or orange and orange-beige yarn for marble. 6 row: (2СБН next, 4СБН) х 6 times (36)
7-8 series: 36 CBN in a circle (36)
9th row: (2CBN next track, 5CBN) x 6 times (42)
10th row: (2CBN next, 6SBN) x 6 times (48)
11 series: (2СБН in the next section, 7СБН) х 6 times (54)
Finish the job.
Embroider the tortoise shell with a green / orange thread.

THE LOWER SIDE OF THE TORTOISE PANCIER:
For Mr. Tortoise, start with a green thread.
For Mrs. Turtle with orange thread.
1 row: 6 CBN (6)
2 row: (2 CBN in each p.) X 6 times (12)
3rd row: (2CBN next, 1CBN) x 6 times (18)
4 series: (2СБН in the next section, 2СБН) х 6 times (24)
5 series: (2СБН next, 3СБН) х 6 times (30)
6 row: (2СБН next, 4СБН) х 6 times (36)
We change the thread color to dark green and light green yarn under
Marble or orange and orange-beige yarn for marble.
7 series: (2СБН in the next section, 5СБН) х 6 times (42)
8th row: (2CBN next track, 6CBN) x 6 times (48)
9th row: (2CBN next track, 7CBN) x 6 times (54)
Lightly fill with filler. Change the color of the thread, fold the two parts of the shell together and tie them together on the edge through both layers: 54СБН, 4ВП, turn and tie by chain, this ending a series of 54 bars.
Finish the job.

Sew the shell to the body.

BASKET:
Straw thread:
1 row: 6 CBN (6)
2 row: (2 CBN in each p.) X 6 times (12)
3rd row: (2CBN next, 1CBN) x 6 times (18)
4th row: (2CBN next, 2CBN) x 6 times (24)
5 series: (2СБН in the next section, 3СБН) х
6 times (30)
6-10 series: 30 SBN in a circle (30)
Finish the 10th row of the PSBN.
Dial 16VP, insert the hook in the 15th st. outside the basket, 1VP, turn the 15PSBN into a chain and finish the job.

SHAPE FOR TURTLE MISSIS
1 row: 6 CBN (6)
2 row: (2 CBN in each p.) X 6 times (12)
3rd row: (2CBN next, 1CBN) x 6 times (18)
4 series: (2СБН in the next section, 2СБН) х 6 times (24)
5 series: (2СБН next, 3СБН) х 6 times (30)
6 row: (2СБН next, 4СБН) х 6 times (36)
7-10 series: 36 SBN in a circle (36)
11th row: (2CBN next track, 1CBN) x 18 times (54)
12-14 series: 54 CBN in a circle (54)
Finish the 14th series of SSBN, 4VP, 1SBN in the 2 nd section from the hook – repeat in a circle, complete the work of the PSBN.
Leave the thread to sew a hat to the head.
Sew flowers from felt to the hat.

SHEEP FOR THE TURTLE MASTER
1 row: 6 CBN (6)
2 row: (2 CBN in each p.) X 6 times (12)
3rd row: (2CBN next, 1CBN) x 6 times (18)
4 series: (2СБН in the next section, 2СБН) х 6 times (24)
5 series: (2СБН next, 3СБН) х 6 times (30)
6 row: (2СБН next, 4СБН) х 6 times (36)
7-10 series: 36 SBN in a circle (36)
11th row: (2CBN next track, 1CBN) x 18 times (54)
12-13 series: 54 CBN in a circle (54)
Finish the work, leave the thread to sew the hat to the head.
Sew the pen to the cap.
– Sew my head to the body.
– Sew your hands to the body.
– Embroider the navel.
– Sew a hat to the head

– Sewn shell to the body of the turtle.
– Make necklace with bead and ribbon for Mrs. Turtle.
– Of square fabric to make a “knot” for Mr. Turtle.
Sew a “knot” to the branch.

POINTS:
Cut off the 50cm wire. Bend in half and using a hook twist together.

Fold in half and twist again – the first arc of glasses.
Using an oval or circular object to create a shape points.

Twist 2 or 3 times. Make the second part. Twist the second shackle of glasses.

Mr. and Mrs. Turtles Ready!

More Amigurumi Turtles Ideas:

Amigurumi Cute Turtle Free Pattern

Step 1. Head, body and paws. 
Knit with a salad-coloured yarn. 
Head (1 pc.):
1 row-6 prs in Ring Amigurumi (6)
2 row-6PR (12)
3 row-(PRS, D) * 6 (18)
4 row-(2 PRS, D) * 6 (24)
5 row-(3 PRS, D) * 6 (30)
6 row-(4 PRS, D) * 6 (36)
7 row-(5 PRS , d) * 6 (42)
8 Row-(6 PRS, D) * 6 (48)
9 Row-(7 PRS, D) * 6 (54)
10 Row-(8 PRS, D) * 6 (60)
11-21 Series-Unchanged (60)
22 Row-(4 PRS, D) * 12 (72)
23-29 Series-Unchanged (72)
30 Series – (10 PRS, UB) * 6 (66)
31 Row – No change (66)
32 Series – ( 9 PRS, UB) * 6 (60)
33 Series – Unchanged (60)
34 Series – (8 PRS, UB) * 6 (54)
35 Series – (7 PRS, * 6 (48)
36 Series – (6 PRS, UB) * 6 (42)
37 Series – (5 PRS, UB) * 6 (36)
38 Series – (4 PRS, UB) * 6 (30)
Fasten thread and cut , leaving the required length for sewing.
We hammer the detail tightly, so that we have formed a bend. But do not overdo it that the bun was not stone. 
If you like not to sew the details, and tucker them into the canvas, then first tie the paws (description below). The upper legs will need to be curiosity on the 28th row of the calf, and the bottom on the 11-12 row opposite each other. 

Body (1 pc.):
1 row-6 prs in Ring Amigurumi (6)
2 row-6PR (12)
3 row-(PRS, D) * 6 (18)
4 row-(2 PRS, D) * 6 (24)
5 row-(3 PRS, D) * 6 (30)
6 row-(4 PRS, D) * 6 (36)
7 row-(5 PRS , d) * 6 (42)
8 Row-(6 PRS, D) * 6 (48)
9 Row-(7 PRS, D) * 6 (54)
10 Row-(8 PRS, D) * 6 (60)
11-20 Series-No Changes (60)
21 Series-(8 PRS, UB) * 6 (54)
22-23 Series-Unchanged (54)
24 Series – (7 PRS, UB) * 6 (48)
25-26 Series – No Change (48)
27 Row – ( 6 PRS, UB) * 6 (42)
28-29 Series-No changes (42)
30 Series-(5 PRS, UB) * 6 (36)
31 series-(4 PRS, UB) * 6 (30)
Fasten and cut the thread.
The detail is slightly smaller than the head, so that the body is harmonizes. 

Paws (4 pcs.):
1 row-6 prs in Ring Amigurumi (6)
2 row-6PR (12)
3 row-(PRS, D) * 6 (18)
4 row-(2 PRS, D) * 6 (24)
5-10 Series – Unchanged (24)
11 Row – (10 PRS, UB) * 2 (22)
12 row – no change (22)
13 Row – (9 PRS , UB) * 2 (20)
14 Row – unchanged (20)
15 Row – (8 PRS, UB) * 2 (18)
16 Row – no change (18)
17 Row – (7 PRS, 2 (16)
18 Row – unchanged (16)
19 Row – (6 PRS, UB) * 2 (14)
20 Row – unchanged (14)
21 Row – (5 PRS , UB) * 2 (12)
22 row-No changes (12)
Paws we’re not. Next we need to close the hole. For this purpose, without cutting off a thread, fold a detail «a wall to a wall» and knit a number of PRS (5-6 columns, at whom as it will turn out). Now fix the thread and cut, leaving the necessary length for sewing. If you will Tucker paws in a body, it is not necessary to leave a thread, simply fasten.

Step 2. 
Shell: Front part. Knitting a filament of beige color. 
1 Row-6 prs in Ring Amigurumi (6)
2 row-6PR (12)
3 row-(PRS, D) * 6 (18)
4 row-(2 PRS, D) * 6 (24)
5 row-(3 PRS, D) * 6 (30)
6 row-(4 PRS, D) * 6 (36)
7 row-(5 prs, D) * 6 (42)
8 Row-(6 PRS , d) * 6 (48)
9 Row-(7 PRS, D) * 6 (54)
Next change the thread to brown and OBVJAZYVAEM our item lobster step.
As it fit, you can see here. Fasten and cut the thread, leaving the necessary length for sewing. 
Back. It will consist of two parts-from the bottom (simple circle) and the top (volumetric). 
Knit the top part of the filament of beige color. 

1 Row-6 prs in Ring Amigurumi (6)
2 row-6PR (12)
3 row-(PRS, D) * 6 (18)
4 row-(2 PRS, D) * 6 (24)
5 row-(3 PRS, D) * 6 (30)
6 row-(4 PRS, D) * 6 (36)
7 row-(5 prs, D) * 6 (42)
8 Row-(6 PRS , d) * 6 (48)
9-11 Series – No Change (48) fasten and trim the thread. 
Knit the lower part of the thread of brown color. 
1 Row-6 prs in Ring Amigurumi (6)
2 row-6PR (12)
3 row-(PRS, D) * 6 (18)
4 row-(2 PRS, D) * 6 (24)
5 row-(3 PRS, D) * 6 (30)
6 row-(4 PRS, D) * 6 (36)
7 row-(5 prs, D) * 6 (42)
8 Row-(6 PRS , d) * 6 (48)
Do not cut the thread, take the first part and knit them together lobster step. At the end, a little bit fill the detail. Only not strongly, that the shell did not sticking on a back, and adjoined to it all surface. Close the part to the end and cut the thread, leaving the necessary length for sewing. 

Circles: We will have circles of two colors: green-for Taurus, brown-for the shell. For Taurus We need 13 circles-3 on “handles”, 2 on “legs” and 3 on the head. To connect them, simply dial on 8-9 loops in a ring a. For a shell circles of a little larger size-we collect 8 loops in a ring and then knit the second row from 8 D (16). We need seven of those parts. If you want to make on a shell of circles of different size, small can make on 12 or 9 loops. The quantity will depend on the thickness of the yarn. Pin the ready-made circles to your shell to see how many more parts you need. 
Eyes: Eyes We will knit from cottongold, even if the body you crochet from Softy. 
If you crochet the body with cottongold yarn, the outline of the peephole is as follows: Black detail.

1 Row-6 prs in Ring Amigurumi (6)
2 row-6PR (12)
3 row-(PRS, D) * 6 (18)
4 series-(5 PRS, D) * 3 (21)
Fasten and cut the thread, leaving the necessary length for sewing. 
White detail. 
1 Row-6 prs in Ring Amigurumi (6)
2 row-6PR (12)
3 row-(PRS, D) * 6 (18)
4 series-(2 PRS, D) * 6 (24)
Fasten and cut the thread, leaving the necessary length for sewing. 
If you crochet the body with Softy yarn, the outline of the peephole is as follows: Black detail. 
1 Row-6 prs in Ring Amigurumi (6)
2 row-6PR (12)
3 row-(PRS, D) * 6 (18)
4 series-(2 PRS, D) * 6 (24)
Fasten and cut the thread, leaving the necessary length for sewing. 
White detail. 
1 Row-6 prs in Ring Amigurumi (6)
2 row-6PR (12)
3 range-(PRS, D) * 6 (18)
4 row-(2 PRS, D) * 6 (24)
5 row-(7 PRS, D) * 3 (27)
Fasten and cut the thread, leaving the necessary length for sewing. 

Assembly and Design
1. Sew the head to the torso. 
2. The eyes. Sew Black circles to white and white thread embroider glare. We determine where we will have eyes and do in those places Utjazhki. Then sew the eyes. The black thread is the accent- “line cilia ” + Eyebrows. To embroider a mouth it is better to use a separate thread. 
3. Sew the front part of the shell on the puzike. Do not forget at the beginning of the assembly to do  “fitting ” for all parts. This will help you see the approximate result and otkorektirovat the location of the parts if necessary. 
4. From the shell (if you do not Provjazyvali paws in the process of knitting the body) measure the same distance for the sewing of upper feet (28 row). They must be exactly opposite each other. Then sew the lower paws, focusing on the top (11-12 row). 
5. Sew the back of the shell and decorate it with specks. (I’m here increment specks, want to make it look like Elena 😊) 6. Sew Green specks on the paws, head and make additional embroidery green thread, imitating small specks (on the muzzle distribute them as freckles).
Stitch Size-1 loop. 
Sew the details think about what should fit snugly (for these do obmetochnyj seam-peepholes, specks), and what to perform over the body (these sew  “chain ” on the circle of details, such as a shell). Like everything. If I missed something, I beg to forgive and formalize to the end by myself.