Materials
– Plush yarn
– Crochet hook
– Stuffing
– Stitch Marker
– Scissors

Abbrevitation
ch = chain stitch
inc – increase
sc = single crochet
dec = decrease
rnd = round

Amigurumi Plush Red Snake for Beginners Free Pattern:

Snake Pattern
4 ch, rotare, from second chain crochet:
1 . 1 inc, sc, 2 inc, sc, inc (10)
2. 10 sc
3. (1 sc, inc, 1 sc, inc, 1 sc)*2 (14)
4. 14 sc
5. (1 sc, inc)*7 (21)
6-9. 21 sc
Incert eyes between 5 and 6 rows
10. (1 sc, 1 dec)*7 (14)
Stuff the snake as you go along
11- 84. 14sc (14)
85. white 14 sc (14)
86. pink 14sc (14)
87. white 14sc (14)
88. pink 14sc (14)
89. white 14sc (14)

Pink:
90-91. 14 sc
92. (5 sc, 1 dec)*2(12)
93. 12 sc
94. (2 sc, dec)*3 (9)
95. 9 sc
96. (1 sc, dec)*3 (6)
pull the hole tight

More Amigurumi Snake Ideas:

Materials
– Plush Yarn
– Stuffing
– Stitch Marker
– Scissors

Abbreviations
MR – Magic Ring
sc – Single crochet
inc – increase
dec – decresase
slst – Slip stitch

Amigurumi Plush Crochet Snake Princess Free Pattern:

Body and Head
6 sc in MR
1 Rnd – sc,inc*3 (9)
2 Rnd – 9sc
3 Rnd – 2sc,inc*3 (12)
4 Rnd – 12sc
5 Rnd – 3sc,inc*3 (15)
6 Rnd – 15sc
7 Rnd – 4sc,inc*3 (18)
8-57 Rnd – 18sc (50 rows)
58 Rnd – 4sc,dec*3 (15)
59 Rnd – 15sc
60 Rnd – 3sc,dec*3 (12)
61 Rnd – 12 sc
62 Rnd – 12inc (24)
63 Rnd – 3sc,inc*6 (30)
64 Rnd – 4sc,inc*6 (36)
65 Rnd – 5sc,inc*6 (42)
66-68 Rnd – 42sc (3 rows)
69 Rnd – 15sc, 6dec, 15sc (36)
70-73 Rnd – 36sc (4 rows)
We insert the eyes between rows 69 and 70, where the decreases in row 69 begin and end.
74 Rnd – 4sc,dec*6 (30)
75 Rnd – 3sc,dec*6 (24)
76 Rnd – 2sc,dec*6 (18)
77 Rnd – 1sc,dec*6 (12)
78 Rnd – 6dec
We cut the thread and tighten the hole.
We tighten the eyes and muzzle.
We embroider the whites and eyelashes.
Our Princess is ready!)))

Crown:
We take yellow  yarn and cast on a chain of 12 chain stitches, close it in a circle, a chain stitch and crochet 2 rows of 12 stitches in a circle, Row 3: crochet as follows: 1 sl st, ch, 1 sc with yarn over, ch, 2 sl st, ch 1 sc with yarn over, ch, 2 sl st, ch, 1 sc with yarn over, ch, 2 sl st, 1 sc with yarn over, ch, 1 sl st. Cut the thread, tighten the loop and spin.
We sew the crown to the head.

More Amigurumi Snake Ideas:

Materials and tools
YarnArt Jeans yarn (two colors as desired)
Hook 1.75-2 mm
Eyes for toys 6-7 mm
Filler for toys
Pin markers
Keychain holder
Needle for sewing on parts
Scissors

ABBREVIATIONS
MR – magic ring
Sc – single crochet
inc – increase
dec – invisible decrease
ch – chain stitch

Amigurumi Crochet Snake Keychain Free Pattern:

Head
Start with the main color.
1. 6 sc in MR
2. 1 inc x 6 (12)
3. (1 sc, 1 inc) x 6 (18)
4. (2 sc, 1 inc) x 6 (24)
5. (3 sc, 1 inc) x 6 (30)
6-9. 30 sc change the yarn to the second color
10. 1 sc, 1 inc to the end of the row (45)
11-12. 45 sc
Insert eyes between round 8 and 9, the distance between the eyes is 5 sc.
13. (13 sc, 1 dec) x 3 (42)
14. (4 sc, 1 dec) x 7 (35)
15. (3 sc, 1 dec) x 7 (28)
16. (2 sc, 1 dec) x 7 (21)
17. (1 sc, 1 dec) x 7 (14)
18. 7 dec (7)
Stuff tightly, paying attention to the cheeks, cut the yarn, hide the tail.

Body and Tail
Crochet with the main color.
1. 4 sc in MR
2. 1 inc, 3 sc (5)
3. 2 sc, 1 inc, 2 sc (6)
4. 1 inc, 5 sc (7)
5. 2 sc, 1 inc, 4 sc (8)
6. 1 inc, 7 sc (9)
7-50. 9 sc
Leave a yarn for sewing.

Assembling the toy
Sew the body, tighten the eyes, in any way convenient for you.
Embroider the eyelashes and eyebrows.
Embroider the nostrils at the level of rnd 9 and 10.
Congratulations, your snake is ready!

More Amigurumi Snake Ideas:

List of materials
1. Super Bulky/14ply chenille yarn Himalaya Dolphin Baby Colors 100g/120m or analogue;
2. Fine/4ply yarn YarnАrt Jeans 50g/160m for face decoration and the tongue;
3. Hooks size 3.5 mm for the snake, 2 mm for the rongue;
4. Safety eyes 14 mm (16mm will be also suitable);
5. Needle with a large eye;
6. Fiberfill;
7. Scissors.

Abbreviations
MR – magic ring;
CH – chain;
SL ST – slip stitch;
SC – single crochet;
HDC – half double crochet;
INC – increase. Work 2 sc in one stitch;
HDCINC – half double crochet increase. Work 2 hdc
in one stitch;
DEC – decrease;
(____)*3 – repeat stitches in brackets 3 times.

Amigurumi Plush Snake Free Pattern:

Start from the head, hook size 3.5 mm.
1. 6sc in a MR or ch2, 6sc in the 2nd ch from the hook (6)
2. 6inc (12)
3-4. 12sc (12) 2 rounds
5. 2inc, 4hdcinc, 2inc, 4sc (20)
6. 3sc, inc, (1hdc, 1hdcinc)*4, inc, 7sc (26)
7-12. 26sc (26) 6 rounds
Insert safety eyes in round 5 where hdcinc are. Insert eyes 14 mm at a distance of 6-7hdc, counting from the eye stem. The photo shows the points where we insert the eye stems.
Before securing the eyes with a plug, check if they are located evenly in relation to the snout.

Stuff the toy with fiberfill as you go. I stuffed the head quite tightly, and stuffed the rest of the toy so that the snake’s body remained soft and elastic.
13. 4sc, dec, 12sc, dec, 6sc (24)
14. (6sc, dec)*3 (21)
15. (5sc, dec)*3 (18)
16. 18sc (18)
17. (4sc, dec)*3 (15)
18-140. 15sc (15) work as many rounds as you need (I got
123 rounds).
141. dec, 13sc (14)
142. 14sc (14)
143. (5sc, dec)*2 (12)
144. 12sc (12)
145. (4sc, dec)*2 (10)
146. 10sc (10)
147. (3sc, dec)*2 (8)
148. 8sc (8)
149. (2sc, dec)*2 (6)
150. 6sc (6)
151. 3dec (3)
Cut the yarn, fasten off.

Decoration
Take black yarn YarnArt Jeans and a suitable needle. Embroider the upper eyelids, nostrils and mouth. I embroidered the eyebrows with chenille yarn above the eyes, 4-5 stitches will be enough.

Tongue
Hook size 2 mm and red yarn YarnArt Jeans. The tongue is crocheted as a separate piece and then attached to the mouth using the ends of the red thread. You can also crochet the tongue on the toy. Insert the hook in the middle of the mouth, grab the red yarn, draw the loop and make ch1. Then follow my description.
Ch12, from the second chain on the hook: 3 sl st.

Ch4, from the second chain on the hook: 3 sl st.

Work 8 sl st on the main chain.
Cut the yarn, leaving the end for sewing pieces.

Attach the tongue to the mouth.
Your snake is ready!

More Amigurumi Snake Ideas:

Amigurumi Crochet Snake Cholera in Hat Free Pattern

PATRÓN:
MATERIALES:
Lanas en color marrón, blanco y negro, rosa y malva

Relleno

Aguja de crochet

Aguja e hilo negro para bordar el hocico

Tijeras
ABREVIATURAS

Cad:    cadenetas

Pb:      punto bajo, medio punto

Pm:     punto medio

Pa:      punto alto

Pd:      punto deslizado

Aum:  aumento

Dism: disminución

*…..* las indicaciones cuando aparecen en medio de estos símbolos significa que se repiten x número de veces que se indica a continuación

CULEBRA:

V1. Aro deslizdo 6 pb.

V2.-v4. Tejer 6 pb

V5.  *1 aum, 2pb*, repetir de * a * 2 veces (8 pb)

V6.-v57. Tejer 8 pb

V58. *1 pb, 1 aum,*, repetir de * a * 4 veces (12 pb)

V59. *1 pb, 1 aum,*, repetir de * a * 6 veces (18 pb)

V60. *2 pb, 1 aum,*, repetir de * a * 6 veces (24 pb)

V61. *3 pb, 1 aum,*, repetir de * a * 6 veces (30 pb)

V62.  2 pb, *4 pb, 1 aum*, repetir de * a * 6 veces,  1 aum, 2 pb (36 pb)

v63. 17 pb, 2 aum, 17 pb (38 pb)

v64. 18 pb, 2 aum, 18 pb (40 pb)

v65. 18 pb, 2 dism, 18 pb (38 pb)

v66. 17 pb, 2 dism, 17 pb (36 pb)

V67  2 pb, *4 pb, 1 dism*, repetir de * a * 5 veces,  2 pb, 1 dism (30 pb)

V68. *3 pb, 1 dism,*, repetir de * a * 6 veces (24 pb)

V69. *2 pb, 1 dism,*, repetir de * a * 6 veces (18 pb)

V70. *1 pb, 1 dism,*, repetir de * a * 6 veces (12 pb)

V71.  6 dism (6 pb)

GORRA:

V1. Aro deslizado 6pb

V2. 1 aum en cada pb (12 pb)

V3.- v4. Tejer 12 pb

VISERA:

V5  1 cad, Tejer 5 pb, girar la labor

V6.  1 cad, tejer 5 pb, girar la labor

V7. 1 dism, 1 pb, 1 dism. Rematar

More Amigurumi Snake Ideas:

Size: The length of the snake-40 cm, the height in the sitting position-15 cm

You will need: cotton or acrylic yarn (thickness of approximately 200-225 m/50 g,
My serpent is connected from “Children’s Caprice” and remnants of Pechorka “cashmere” and “Crossbred Brazil”) – 50 g of blue (basic) color, a little red, white and black for furnish of a little white buklatnoy yarn for furnish of a cap and a scarf (i-Troitskaya ” Fantasia “)
Hook № 2 Spokes № 2.5
Synth wire 2 beads for eyes
Description The idea of such a snake appeared thanks to the toys sewn from the fleece of Natalia Zatynatska.

Reduce:
V. P. – Air Loop
SS-Connecting Column
Art. b/n – Column without a scale
UB – Ubava (2 St. b/n together)
D – Increase (2 St. b/N in one St. of the previous row)

Density of knitting, columns without a scale, a hook № 2:32 art. b/N and 36 series = 10 x 10 cm;
Persons. Surface, Spokes № 2.5:36 p. and 44 P. = 10 x 10 cm

Amigurumi Christmas Snake Free Pattern

Head
Snake knitting on a spiral, at the end of a row of a connecting column is not present, the loops of lifting also are not present.
Blue yarn Crochet № 2 Dial 8 v. P., tie the chain in a circle, starting with the second loop from the hook:
1 row: 3 art. b/N in one loop, 5 art. b/N, 3 art. b/N in one loop, 5 art. b/N (16)
2 row: PR * 3 times, 5 art. b/N, PR * 3 times, 5 art. b/N (22)
3 Series: (article b/n, D) * 3 times, 5, (art. b/N, D) * 3 times, 5 art. b/N (28)
4 row: Art. b/N, D, art. b/N, D, 15 art. b/N, D, art. b/N, D, 6 art. b/N (32)
5 row: 2 art. b/N, D, 2 art. b/N, D, 15 art. b/N, D, 2 art. b/N, D, 7 art. b/N (36)
6 row: 3 art. b/N, D, 3 art. b/N, D, 15 art. b/N, D, 3 art. b/N, D, 8 art. b/N (40)
7-14 Series: Art. b/N (40)
Tip: In order not to lose the beginning of the series and not to suffer with the score of columns, mark the desired place “marker”-take a small segment of the thread of another color and stretch it between the last column of the previous row and the first column of the next-from this thread already It will be easy to calculate the number of related rows in future. As you crochet, pull out the “marker” and move it to a new point of reference.
15 Row: 9 art. b/N, UB, 18 art. b/N, UB, 9 art. b/N (38) Tip: To be less noticeable, use the “invisible decreases” method.
16-17 Series: Art. b/N (38)
18 Row: 9 art. b/N, UB, 17 art. b/N, UB, 8 art. b/N (36)
19-20 Series: Art. b/N (36)
21 Row: 9 art. b/N, UB, 16 art. b/N, UB, 7 art. b/N (34)
22-23 Series: Art. b/N (34)
24 Row: 9 art. b/N, UB, 15 art. b/N, UB, 6 art. b/N (32)
25-28 Series: Art. b/N (32)
29 Row: (6 St. b/N, UB) * 4 times (28)
30 Row: (5 St. b/N, UB) * 4 times (24)
31 Series: (4 St. b/N, UB) * 4 times (20), stuffing the synth
32 Series: (3 St. b/N, UB) * 4 times (16)
33 Series: (2 St. b/N, UB) * 4 times (12),
Fill the synthesizer to the end
34 Series: (UB) * 6 times (6), bind, cut off the thread is more authentic, with the help of her sewing eyes-beads, Protaskivaem thread through the head and put it in the lower part of the head, closer to the nape, making a small duckling for the eyes, so they are a little drowned Inside the head.
A black thread embroider a mouth and nostrils.
The nostrils are also bind to make a slightly convex spout.

Body
Blue yarn Crochet № 2 Dial 2 v. P., in the second loop from the hook Knitting 6 art. b/N
1 row: PR * 6 times (12)
2-7 Series: Art. b/N (12)
8 row: Ave, 11 art. b/N (13)
Then knit in the same way, making one increment in each 10th row (use “marker”).
When you have 18 art. b/N, insert the inside of the tail wire, whip the synth.
For safety of a wire it is better to wrap a synth and to fix a thread (how to do it, look in the Mk Snake from Natalia Grhinina).Further knitting with a wire, we fill in a synth on a course of knitting.
The additions are finished on 20 art. b/N, then knit without increments to the desired length of the snake (I-40 cm),
The last four rows knit as follows:
8 cc, 12 art. b/N (thus form the neck).
The thread is cut off, the body is filled to the end with a synth and nailed to the head, while the longer part of the neck is attached closer to the nape.
Hat
The brown yarn of white color on the spokes № 2.5 is typed 26 p., knitting gum 1 x 1 (1 persons., 1 N.) 1.5 cm.
We attach the red thread and knit the facial smoothness, making one ubavke at the beginning and at the end of the series in each 4th row.
When the spokes remain 4 p.,-we have three more rows and close.
Sew, make a pomponchik and sew to a cap.

Scarf
The white-coloured beads on the spokes № 2.5 are typed 8 p., knit with elastic band 1 x 1 (1 persons, 1 N.) 1.5 cm.
Attach the red thread and continue to knit a rubber band 1 x 1 to the desired length of the scarf, finish with the Buclean yarn, as 1.5 cm.
I have a scarf in length of 22 cm.
Gift Bag
Yarn of red color on the spokes № 2.5 dial 50 p. and knit 7 rows of facial smoothness (1st row-seamy). We turn to knitting jacquard on the scheme, entering the work thread white.

Amigurumi Snake Free Pattern

Head-torso. Crochet 4 rev. n the chains and we will knit around the chain with circular knitting with single crochets, we will also add and subtract the head loops on the sides of the chain. 
1 p. to tie a chain of 8 p. 
2 p. double the number of loops. 
3 p. without changes . 
4 p. add 1 p. on both sides. 
5, 6,7,8 rows unchanged. 
9 p. add 1 p. on both sides of 
10 p. add 2 points on both sides. (evenly, that is, after 1 p) 
11 p. no change 
12 p. add 2 p on both sides (evenly, that is, after 1 p.) 
13p. without changes. 
14 p. reduce by 3 on both sides and 1 in the middle. 
15 r. without changes.
16 r. Reduce the loops evenly so that in the end there is only 15 p. 

Do not forget to fill the snake with padding polyester !!! 
17r. without changes. 
18 r. turn down 3 loops evenly, as a result, 12 
sections from 19 to 158 r remain unchanged (alternating yarn from 19 rubles. We knit 2 rows of black with a hook, 1 row of white and 4 lime rows, etc.). 
159p subtract 1 p. 
From 160 to 165 unchanged. 
166 r. subtract 1 p. 
from 167 to 172 unchanged. 
173 r. subtract 1 p. 
from 174 to 180 p. without changes. 
181 r. subtract 1 p. 
182 p. close all loops, knitting 2 together. 

Snake muzzle from light green yarn: crochet a chain of 4 up. n., knitting circular around the chain. 
1 p. 6 n. Knit.
2 p. add 1 p. on both sides. 
3 p. add 1 p. on both sides. 
4p. without changes. 
5 r. add 1 p. on both sides. 
6p. add 1 p. on both sides. (fill with padding polyester) 

Snake mouth: light green part: hook 4 turns up. n. chains and knitting forward and back art. b / n 
1 p through 1 rev. to knit a noose 3 p. 
2 p. turn the product in the 2nd p. add 1 p. 
3 p. turn the product, unchanged 
4 p. we turn the product, in the 1st paragraph add 1 p. 
5 p. turn the product, in the 1st paragraph add 1 p. The 

red part: a chain of 3 vozd. knitting forward and back st. b / n like the green part. 
1 p through 1 elev. knit 2 loops.
2 p. in the 2nd paragraph add 1 p 
3 p. without changes. 
4 p. in the 1st p. add 1 p. 
5 p in the 1st p. add 1 p. 
Sew the red part of the snake’s mouth onto the green part. 

Eyes:
white oval: a chain of 5 air. and crochet 1 row semi-s / n around the chain in circular knitting from 9 -10 p. 
Oval black: chain from 4 rev. n, after 2 rev. n knit 2 loops stolb.b / n. Sew black on the white oval. 

Snake tongue: pink thread to hook a chain of 9 vozd. n. 
Through 1 rev. p. to knit 3 polust.b / n, further from the same thread to dial 4 more vozd.p and also knit through 1 vozd.p. 3 half b / n, and there remains a few rebirth of the p. chain not knitted.

Cap: crochet a thread with a chain of 22. n., we close in a circle a compound. and knit circular knitting. 
1 p. knit polust.s / n 
(2p change the thread to red and knit st.b / n) 
from 2 p to 6 p without changes. 
7 r. reduce by 2 p on both sides of 
8 p. reduce 1 p on both sides 
9 p subtract 1 p on both sides 
10 p unchanged 
11 p. subtract 1 n from both sides 
12 p subtract 1 p from both sides 
13 p. subtract unchanged 
14 p. reduce 1 p on both sides 
15.16 p without changes 
17 p subtract 1 p on both sides 
18 p. without changes 
19 r to lower all and leave a little bit of thread to attach the pumpo.

Pompon:
from a yarn shiny with shiny villi, crochet 3 vozd.p chains, lock into a circle and knit into a circular ball. b / n 
1 p. 6p. 
2 p. double loops. 
3 p. no change 
4 p. knit the entire series of 2 n. together, not forgetting sintepon before closing ball 
Attach it on the tip of the hat, the hat hook to the side, and also embroidered with lurex yarn 2013 figures 

for snake Handbag 
red yarn to dial a chain of 7 vozd.p . , knit around the chain circular knitting table.b / n. 
1 p. 1 p. from the hook to knit around the chain 14 p. 
2 p. add 1 p in each corner of the rectangle (that is, 4p total) 
3 p. add 1 p in each corner of the rectangle (i.e., 4 p. in total) = total 22 p.
4 p. no change 
5 p. reduce by 1 p in each of 4 sides 
6 p. no change 
7 p. reduce by 1 p in each of 4 sides 
8 p. no change 
9 p. reduce by 1 p. on both sides. 
10 p. reduce by 1 p. on both sides. 
11 p. turned the bag and knit in the opposite direction polust.s / n. Through each item add 1 p. 
12 r. change the thread on the shiny with villi, knit a half column. b / n, 1 air.p, semi-b / n, 1 aerial, etc., cut the thread. Thread the bag with a padding polyester, tie the bag with a shiny thread, fasten a thread in the shape of a handle and embroider 4 snowflakes on the bag with Lurex thread .

Twist the snake, fasten the rings with a needle and thread in several places, so as not to unwind, sew a muzzle, and under her mouth, eyes, tongue, embroider eyebrows and nostrils. Dress the cap and hang the bag on the tip of the tail. 

Legend:
airway – air loop. 
polust b / n polustolbiki without nakida. 
Art.b / n – columns without single 
polust. s / n – semi-column with a crochet. 

More Amigurumi Snake Ideas:

You will need:
Yarn dark and light green color (I used Schachenmayr Bravo, 100% Acrylic, 133 m/50 g)
Little Yellow Yarn
A little bit of fine yarn type iris for Reed
Hooks № 4 or № 3.5 and № 1.5 (for Reed)
Beads
A piece of felt for the crown
Wire (preferably in a Hank)
Filler (in this case it is best to use cotton wool)
Thread for the design of the muzzle
Shades of pink or blush for toning
A couple of important components required to create a positive toy: friendly, positive attitude and good mood!

Designations used in the description of knitting:
VP-Air Loop
Non-lime
C-Column with scale
PSG-semi-stacked with scale
SS-Connecting Column
Add-2 column without the scale in one loop
PRSPs-2 half-column with scale in one loop
Ubava-to skip 1 column of the previous row, to get 1 SBN

Amigurumi Snake Free Pattern

Head:
1 row: 2 VP strands of dark green color, lock in the ring, then knit in a circle 6 SBN [= 6];
2 row: 6 increments [= 12]
3 row: (increment, 1 sbn) * 6 times [= 18]
4 row: (Increment, 2 SBN) * 6 times [= 24]
5-6 Series: 24 SBN [= 24]
We turn to the expansion of the head (formation of convex cheeks):
7 row: 2 SBN, 3 increments, 9 SBN, 3 increments, 7 SBN [= 30]. The additions should be arranged symmetrically, on opposite sides of a head.
8 row: 3 SBN, 1 PRSPs, a raise from PRSPs, 1 PRSPs, a raise from PRSPs, 1 PRSPs, 3 SBN, 4 SS, 2 SBN, 1 PRSPs, a raise from PRSPs, 1 PRSPs, a raise from PRSPs, 1 PRSPs, 8 SBN [= 34]. The additions in this row should be placed strictly above the additions of the previous row.
Next we turn to knitting of light-green yarn and Projazat columns of the next row, capturing only the back half-loop of columns of 8 rows.
9-10 Series: 34 SBN [= 34].
11 row: 3 SBN, 3 ubcaps, 11 SBN, 3 ubcaps, 8 SBN [= 28]. The ubavki of this row should be located in the area of cheeks, i.e. where there were additions in the 7th and 8th rows.
12 row: (2 SBN, Ubavka) * 7 times [= 21]
13 row: (1 SBN, Ubavka) * 7 times [= 14]
Attach the filler to the head. Try to fill the head so that to give it the necessary form, i.e. for giving volume to invest a little more filler in the area of cheeks.
14 row: (1 SBN, Ubavka) * 4 times [= 10]
Leave the opening of the head open.

We design face snake (though it can be done and then, when all the details will be connected and the toy will be collected):
-For nostrils knit 2 chains of 4 VP light green color. Use a thin hook for this, for example, № 2 or even № 1.5, so that the chains of the VP are quite dense.
We have the nostrils in the right place (see the picture), enter the free ends of the chains inside the head and sewing the nostrils to the head with a thread of the appropriate color;
-Knit a forked reed from a very thin yarn: for this we dial a chain of 7 VP (the base of the reed), then dial another 3 VP (the first tip), the connecting column in the second loop from the hook, then another 2 SS in the subsequent loops of the chain. Knit the second tip: 3 VP and again 3 connecting bars in the loops of this chain, then knit connecting posts to the end of the reed;
-Stick the eyes-beads. I recommend first to outline where the eyes will be located, and then fasten them with a single outline thread so that the ends of this thread came out in the back of the bottom of the head. Pulling the loose ends of the threads, you can slightly drown eyes in the head of the snake.
-For the rotor make a big stitch black thread, ie enter and output thread in the right places, and the ends are deduced from the back side of the head at the bottom, in order to be able to adjust the length (or, so to speak, the bending of the mouth). Then lubricate the thread on one side with glue (I used a simple clerical glue-pencil) and glue. If the thread is a little slack, you can tighten it by pulling the ends. In general, the thread of the mouth can also be picked up with a thin thread in several places, but I have a mouth and without it well kept. If it is supposed that the toy will be actively used by children, it is better to fix a ROTK in several places with an additional thread.
Here’s the muzzle I got:

Torso:
1 row: 2 VP, lock into the ring, then knit in a circle 4 SBN [= 4];
2nd row: Add, 3 SBN [= 5]
3 row: Raise, 4 SBN [= 6]
4th row: Add, 5 SBN [= 7]
5 row: Raise, 6 SBN [= 8]
6 row: Raise, 7 SBN [= 9]
7th row: Raise, 8 SBN [= 10]
8 row: Raise, 9 SBN [= 11]
On the resulting workpiece visually outline where the back of the snake will be located, and where the tummy. Then to form a picture of a backrest in each 4-th row to tie 4 columns without a yellow color.Tip: To make the transition from one color to smooth, the last column without a single color should be finished with a thread of another color, as shown in the picture:

Also make sure that the yellow stripes do not move to the sides.
Then we continue to knit the torso in a circle to the desired length.The upper part of the trunk (backrest) looks like this:

And so the inner side (tummy):

That the snake could take any form and position, inside of a trunk it is necessary to insert a wire. The ends of the wire must first be bent, so that in case the wire gets out of the toy, it would not damage the toy itself, nor those who use it. Wire it is necessary to wrap a cotton wool (or other filler), and from above to fix a filler a thread:

Tip: It is best to insert the wire at the beginning of the knitting trunk and continue knitting around the wire. I inserted the wire into the already finished torso length of about 30 cm, believe me-this task is not simple. I had to torment myself.
After the body of the snake is connected to the desired length, proceed to the Vyvyazyju light green tummy. For this purpose knit columns without a scale directly on top of a ready trunk:

In the widest part of the trunk (where in the circular row we have been able to handle 11 SBN), we are able to hook up 4 SBN, catching them on the one circular row of the trunk, then move on to the next circular row and knit 4 on the columns of this series, etc. to the end of the snake’s trunk. This is what the snake’s torso looks like:

It remains quite a little-to collect the snake and give it the right position. Cut off the wire, leaving the end length of 5-6 cm. Bend the end of the wire and insert the wire frame into the head. Inside the head the wire must be bent so that the end of the wire, placed in the head, would be at an angle to the carcass in the torso. This is necessary to ensure that the carcass does not fall out of its head on its own. The head is nailed and the right position is attached to the snake.That’s kind of all. The positive snake is ready!