Materials List:
• Traditional amigurumi yarn in the colors neomint (5743), candy lilac (6006) and cream (1112)
• Leftover white yarn
• Cléa yarn or skein in black
• 2.2mm crochet hook or whatever you are used to
• Eyes with safety lock no. 9
• Fine tapestry needle
• Scissors
• Galvanized wire no. 20
• Pliers

Legend
• MR – Magic ring
• Sc – Single crochet
• Sl st – Slip stitch
• Dec – Decrease
• Hdc – Half double crochet
• Dc – Double crochet
• “x” – Times
• Ch – chain
• Difficulty level: easy

Amigurumi Crochet Seahorse Free Pattern:

Head and Body:
With mint green yarn do:
1– 4 sc in MR
2– (1 inc, 1 sc) x 2 [6 sc]
3-17– 6 sc [15 rows]
18– 6 inc [12 sc]
19– 12 sc
20– (1 sc, 1 inc) x 6 [18 sc]
21– 1 sc, 1 inc, (2 sc, 1 inc) x 5, 1 sc [24 sc]
22-24– 24 sc [3 rows]
25– 12 sc, (1 inc, 1 sc) x 6 [30 sc]
26-29 – 30 sc [4 rows]
Cut a small piece of galvanized wire, the size of the tail (rows 1-17), with the pliers, fold the ends and cover with masking tape.
Insert into Finn, and shape the tail.
30– (3 sc, 1 dec) x 6 [24 sc]
31– 1 sc, 1 dec. (2 sc, 1 dec) x 5, 1 sc [18 sc]
32– (1 sc, 1 dec) x 6 [12 sc]
33– 12 sc
Stuff the body, being careful not to open the stitches.
34– 12 inc [24 sc]
35– 1 sc, 1 inc, (2 sc, 1 inc) x 7, 1 sc [32 sc]
36– (3 sc, 1 inc) x 8 [40 sc]
37 to 45– 40 sc [9 rows]
Place the eyes between rows 41 and 42, 8 stitches apart.
Little by little, add stuffing as you work.
46– (3 sc, 1 dec) x 8 – 32 sc
47– 1 sc, 1 dec, (2 sc, 1 dec) x 7, 1 sc [24 sc]
48– (1 sc, 1 dec) x 8 [16 sc]
49– 8 dec [8 sc]
Close with a reverse magic ring.
Make the expression on the face, and embroider the eyelashes and eyebrows.

Snout:
With mint green yarn, do:
1– 8 sc in the MR
2– (1 sc, 1 inc) x 4 [12 sc]
3– 12 sc
4– 3 sc, 3 dec, 3 sc [9 sc]
5– 3 sc, 3 sl st, 3 sc [9 sc]
6 and 7-9 sc
Fasten with false sc and cut the yarn, leaving a long yarn for sewing.
We will not put stuffing in the snout.
From inside it, pass a yarn to the outside, and return with it to the inside, pulling well, to sink. Tie a knot and hide the excess on the inside.
Sew the snout between the eyes, between rows 42 and 44

Belly:
With the light yellow yarn, make 4 ch. We will work in linear crochet.
1– From the 2nd ch, go back with 3 sc, make a ch and turn [3 sc]
2– 1 inc, 1 sc, 1 inc, make a ch and turn [5 sc]
3– 1 inc, 3 sc, 1 inc, make a ch and turn [7 sc]
4 to 6– 7 sc, make a ch and turn
7– skip the 1st sc, 2 sc, 1 dec, make a ch and turn [5 sc]
8– skip the 1st sc, 1 sc, 1 dec [3 sc]
9– 3 sc. 3 sl st, 3 sc [9 sc]
Outline the entire tummy with sc’s, fasten off and cut the yarn, leaving a long tail for sewing.
Sew to the front of Finn’s body.

Head Fin:
With the candy lilac yarn, make 21 chains, leaving a long yarn before starting.
1– From the 2nd, make 1 sc in each chain [20 sc]
2– Turn the work, go up 2 ch and in the same stitch make 4 more dc. Skip 1 stitch, make 1 sl st, skip 1 stitch and make 5 dc in the same stitch. Continue with this sequence until the end.
Before finishing the last stitch, change the color to cream.

3– Go up a ch, and on top of each dc make (1 sc, 1 ch), and on top of each sl st make 1 sl st.
Fasten off, cut the yarn and hide them inside the work (both the yellow and the lilac, when you changed the color).
Position with pins on top of Finn’s head, right in the center, until the beginning of the neck.

With the long yarn that we left at the beginning, sew.

More Amigurumi Seahorse Ideas:

Materials
• MC: Paintbox Cotton Aran Lime Green or color of choice
• C1: Paintbox Cotton Aran Marine Blue or color of choice
• F/3.75mm crochet hook
• D/3.25mm crochet hook
• Cluster fiberfill
• 6mm safety eyes
• scissors
• embroidery thread or lightweight yarn in Black
• 3” length of pipe cleaner

Abbreviations
st(s) – stitch(es)
sl st  – slip stitch
sk – skip
ch – chain stitch
sc – single crochet
inc – increase: work 2 sc in same st
dec – decrease: work 2 sc together
FLO – front loop only

Notes
• Rounds in the seahorse are worked continuously with no seams.
• Mane is worked in rows and then sewn on to the back of the seahorse.
• First few rounds are worked into front loops only to make it easier on those tight rounds. Make sure to not crochet too tightly. You’ll need to fit in a pipe cleaner!
• Pipe cleaner should have both ends turned in so there’s no sharp edges. Final length of pipe cleaner is about 2”.
• Eyes are placed approximately 1.0-1.25 inches apart.
• Amigurumi can be closed using this technique.

Amigurumi Seahorse Free Pattern:

Body
• Worked in continuous rounds.
• Worked with MC.
Round 1: Work 6 sc into a magic circle. (6) Secure magic circle right away.
Round 2-6: Work 1 sc into FLO of each st across.
• After Round 3, insert pipe cleaner into the tail. Continue working Rounds 4-6 around the pipe cleaner.
Round 7: Work 1 inc, then 5 sc, all FLO. (7)
Round 8: Work 1 inc, then 6 sc, all FLO. (8)
Round 9: Work 1 inc, then 7 sc, all FLO. (9)
Round 10: Now working through both loops. Work [1 inc, 1 sc] 2x, 1 inc, 4 sc (12)
Round 11: Work [1 inc, 1 sc] 2x, 1 inc, 7 sc. (15)
Round 12: Work [1 inc, 1 sc] 2x, 1 inc, 10 sc. (18)
Round 13-14: Work 1 sc in each st around. (18)
Round 15: Work [1 sc, dec] 6x around. (12)
• Stuff the seahorse up to the neckline.
Round 16: Work [2 sc, dec] 3x around. (9)
Round 17: Work [1 sc, dec] 3x around. (6)
Round 18: Work 2 sc in each st around. (12)

Round 19: Work [1 sc, inc] 6x around. (18)
Round 20: Work [5 sc, inc] 3x around. (21)
Round 21-22: Work 1 sc in each st around. (21)
Round 23: Work [5 sc, dec] 3x around. (18)
• Add eyes between Rounds 21 and 22.
• Do not sew a mouth.
Round 24: Work [1 sc, dec] 6x around. (12)
• Stuff the amigurumi.
Round 25: Work 6 dec. (6)
• Fasten off, close, and weave in ends.

Snout
• Worked with MC and D hook.
• Worked in seamed rounds.
Round 1: Work 6 sc into a magic circle. Join to first sc with sl st. (6) Secure magic circle right away.
Round 2: Ch 1. Work 1 sc in BLO of each st around. Join to first sc with sl st. (6)
• Fasten off with a length of tail. Tail will be used to sew snout to head.
• Sew snout to head centered between the eyes, between Rounds 19-21.

Mane
• Worked with C1 and D hook.
Row 1: Ch 17.
Row 2: Work 5 hdc in 3rd ch from hook, sk 1, sl st in next st. *Sk 1, work 5 hdc in next st, sk 1, sl st in next st.* Repeat from * 2 more times for a total of 4 shells.
• Fasten off with long tail to sew the mane onto the back of the seahorse.
• Mane is situated just along the back of the seahorse’s head.
• Beginning tail should be woven in.

Side Fins
• Worked with C1 and D hook.
Row 1: Ch 5.
Row 2: Work 5 hdc in 3rd ch from hook, sk 1, sl st in next st.
• Fasten off with tail to sew the side fins to the side of the seahorse, with round side of shell facing forwards.
• Beginning tail should be woven in.

More Amigurumi Seahorse Ideas:

SKİLL LEVEL: **
SİZE: 8″ / 20 cm tali when seated andmade with the indicated yarn.

MATERIALS:

Worsted-weight yarn in light blue, blue and orange (This example was made with Lily Sugar n Cream 100% cottonyarn)
White craftfelt
Orange and blue embroidery thread
Small orange beads
Size F-5 (3.75 mm) crochet hook
Safety ey es (12 mm)
Fiberfill for stuffing
Yarn needle
Long embroidery needle -Sewing pins
Fabric glue –

note: The head is crocheted in a continuous spiral, but the body is crocheted using traditional joined rounds, as they help the curve of the belly and tail line up properly.

head (in light blue yarn)
Rnd 1: start 6 sc in a magic ring [6]
Rnd 2: ine 6 times [12]
Rnd 3: (ine, sc in next st) repeat 6 times [18]
Rnd 4: BLO sc in ali 18 st [18]
Rnd 5: sc in ali 18 st [18]
Rnd 6: (dec, sc in next st) repeat 6 times [12]
Rnd 7: sc in ali 12 st [12]
Rnd 8: ine in next 6 st, FLO sc in next 6 st [18]
Rnd 9: (ine, sc in next st) repeat 6 times, sc in last 6 st [24]
Rnd ıo: (ine, sc in next 2 st) r epe at 6 times, scin last 6 st [30]
Rnd 11: (ine, scin next 3 st) repeat 6 times, scin last 6 st [36]
Rnd 12: (ine, sc in next 4 st) repeat 6 times, scin last 6 st [42]
Rnd 13: sc in ali 42 st [42]
Rnd 14: (ine, sc in next 6 st) repeat 6 times [48]
Rnd 15: (ine, sc in next 7 st) repeat 6 times [54]
Rnd 16: (ine, sc in next 8 st) repeat 6 times [60] llold the head so that the seahorse’s snout is facing you. The seetion that contains ali the inereases from rounds 8 and 12 is the face. Cut 2 ovals from white felt to frame the safety eyes. Cut a slit in the white felt ey e pieces, insert the safety eyes and attach thembetween round 12 and 13 on both sides of the head.
Rnd 17 – 19: scin ali 60 st [60]
Rnd 20: (dec, sc innext 8 st) repeat 6 times [54]
Rnd 21: (dec, sc in next 7 st) repeat 6 times [48]
Rnd 22: (dec, sc innext 6 st) repeat 6 times [42]
Stuff the head with fiberfill and continue stuffing as you go.
Rnd 23: (dec, sc innext 5 st) repeat 6 times [36]
Rnd 24: (dec, sc innext 4 st) repeat 6 times [30]
Rnd 25: (dec, sc innext 3 st) repeat 6 times [24]
Rnd 26: (dec, sc innext 2 st) repeat 6 times [18]
Rnd 27: (dec, sc innext st) repeat 6 times [12]
Rnd 28: dec 6 times [6]
Fasten off, leaving a tail for sewing. Using your yam needle, weave the yarn tail through the front loop of each remaining stiteh and pull it tight, elosing off the back of the head. Weave in the yarn end.

body (in lightbiue yarn)
The body is worked in joined rounds. End each round with a slst into the first stiteh of the round. Then pull the yam very tightly. Begin each new round with ch 1 and pull the yarn very tightly. Then complete the first stiteh in the same stiteh where you joined rounds (the ch 1 is connected to this stiteh). Yarn tension should be normal. This willhelp the curve of the belly and tail line up properly.
We start at the tip of the tail.
Rnd 1: start 4 sc in a magic ring [4]
Rnd 2 – 3: ch 1, sc in ali 4 st, slst in first st to join rounds [4]
Rnd 4: ch 1, ine, sc in next 3 st, slst in first st [5]
Rnd 5: ch 1, ine, sc in next 4 st, slst in first st [6]
Rnd 6: ch 1, sc in ali 6 st, slst in first st [6]
Rnd 7: ch 1, ine, sc in next 5 st, slst in first st [7]
Rnd 8: ch 1, sc in ali 7 st, slst in first st [7
Rnd 9: ch ı, ine, sc in next 6 st, slst in first st [8]
Rnd 10: ch 1, sc in ali 8 st, slst in first st [8]
Rnd 11: ch 1, ine, sc in next 7 st, slst in first st [9]
Rnd 12: ch 1, sc in ali 9 st, slst in first st [9]
Rnd 13: ch 1, ine, sc in next 8 st, slst in first st [10]
Rnd 14: ch 1, sc in ali 10 st, slst in first st [10]
Rnd 15: ch 1, ine, sc in next 9 st, slst in first st [11]
Rnd 16: ch 1, sc in ali 11 st, slst in first st [11]
Rnd 17: ch 1, ine, sc in next 10 st, slst in first st [12]
Rnd 18: ch 1, sc in next 6 st, ine in next 6 st, slst in first st [18]
Rnd 19: ch 1, sc in next 6 st, (ine, sc in next st) repeat 6 times, slst in first st [24]
Rnd 20: ch 1, sc in next 6 st, (ine, sc innext 2 st) repeat 6 times, slst in first st [30]
Rnd 21: ch 1, sc in next 6 st, (ine, sc in next 3 st) repeat 6 times, slst in first st [36]
Rnd 22: ch 1, sc in ali 36 st, slst in first st [36]
Rnd 23: ch 1, sc in next 6 st, (dec, sc in next 3 st) repeat 6 times, slst in first st [30]
Rnd 24: ch 1, sc in ali 30 st, slst in first st [30]
Rnd 25: ch 1, sc in next 6 st, (dec, sc in next 2 st) repeat 6 Lirııes, slst iri first st [24]
Rnd 26: ch 1, sc in ali 24 st, slst in first st [24]
Stuff with fiberfill and continue stuffing as you go.
The tip of the tail does not need stuffing.
Rnd 27: ch 1, (dec, sc in next 2 st) repeat 6 times, slst in first st [18]
Rnd 28: ch 1, sc in ali 18 st, slst in first st [18]
Rnd 29: ch 1, (dec, sc in next st) repeat 6 times, slst in first st [12]
Rnd 30: ch 1, hdc in next 3 st, slst in next 9 st, slst in first st [12]
Rnd 31: ch 1, sc in alt 12 st, slst in first st [12]
Fasten off, leaving a tail for sewing. Sew the body to the he ad över rounds 17 to 19 of the head. Curl the tail and sew it together with one stiteh so that it will stay put.

mane (in blue yarn)
Ch 42. We will make several ares / waves, each de- seribedhere:
wave 1 (head-end): start in 2nd chain from hook, sc, dc, dc, sc, slst [5]
wave 2: sc, dc, tr, tr, dc, sc, slst [7] wave 3: sc, dc, tr, tr, dc, sc, slst [7] wave 4: sc, dc, dc, sc, slst [5]
wave 5: sc, dc, sc, (markthe next st) slst in next 3 st [6] wave 6: sc, dc, sc, slst [4] vvave 7: sc, dc, sc, slst [4] w av e 8 (tail-end): sc, slst in next 2 st [3]
Fasten off, leaving a long tail for sevving. Pin the stitch you marked (in wave 5) to the base of the seahorse’s head where it meets the neck. Pin the rest of the mane so the head-end reaches the seahorse’s forehead, and the tail-end is stretched dovvn the seahorse’s back. Make sure the mane is in line with the seahorse’s snout and eyes (evenly dividing the body in half). Use the leftover yarn tail to sew the mane in place.

lower fin (make2, in orangeyarn)
Rnd 1: start a magic ring vvith ch 2, dc, ch 2, slst, ch 3, tr, ch 1, dc, ch 1, dc
Tighten the ring. Fasten off, leaving a tail for sevving. One half of the ün should be larger than the other; the larger side is the top of the fin. Sew the fins to each side of the seahorse’s body betvveen round 22 to 25.

UPPER FİN (make 2, in orange yarn)
Rnd 1: start a magic ring vvith ch 3, tr, tr, ch 1, dc, dc, ch 2, sİ st
Tighten the ring. Fasten off, leaving a tail for sevv­ing. Sew the fins to each side of the seahorse’s head betvveen round 24 and 27.

ASSEMBLY
Sew beads to the mane using blue embroidery thread.
Cut 1 egg- shaped piece of felt for the seahorse’s belly patch. Glue the belly patch to the seahorse’s belly, then use orange embroidery thread to sew stripes across the belly patch.