Materials:
(Affiliate links coming at you!)
– 2.75mm hook for main
– Any light weight yarn in the following colours:
* Skin (MC) (I used Hobbii Friends Cotton 8/6 Color 03, approx 25g);
* Grey (CC) (I used Hobbii Rainbow Cotton 8/6 Color 97, approx 25g);
* Red (I used Hobbii Friends Cotton 8/6 Color 41, small amount);
* Light pink for nose (I used Hobbii Rainbow Cotton 8/6 Color 46, small amount);
– You will also need a small amount of fine weight green yarn for the optional leaf embellishment (I used Rainbow Cotton 8/4 Color 100);
– Black crochet thread, size 5 for eyes and mouth;
– Black sewing thread and sewing needle for eyes (alternatively, safety eyes);
– Stuffing;
– Tapestry needle.

Terms and Stitches:
Ch – Chain
Slst – Slip stitch
MR – Magic Ring
Sc – Single Crochet
Inc – Increase. Work a regular sc increase
Dec – Decrease. Work a regular sc decrease
Hdc – Half double crochet
Picot – Ch 2, slst into 2nd ch from hook.
Fsc – Foundation single crochet. A foundation single crochet is made up of a chain st and a sc. Insert hook into either: (a) the side of the previous st if the previous st is a regular sc; or (b) into the ch of the previous st if the previous st is a FSc, yarn over and pull up a loop, yarn over and pull through one loop (chain st made), yarn over and pull through both loops on hook (sc made).

Amigurumi Crochet Mrs. Claus Ornament Free Pattern:

Front Panel (make 1):
Row 1: In MC, ch 8, starting in 2nd ch from hook, sc in each ch (7 sts), ch 1, turn
Row 2: Inc twice, sc 3, inc twice (11 sts), ch 1, turn.
Row 3: Inc twice, sc 7, inc twice (15 sts), ch 1, turn.
Row 4: Inc, sc 13, inc (17 sts), ch 1, turn.
Row 5: Inc, sc 15, inc (19 sts), ch 1, turn.
Row 6: Sc in each st (19 sts), ch 1, turn.
Row 7: Inc, sc 17, inc (21 sts), ch 1, turn.
Rows 8-14: Sc in each st (21 sts), ch 1, turn.
Row 15: Dec, sc 17, dec (19 sts), ch 1, turn.
Row 16: Sc in each st (19 sts), ch 1, turn.
Row 17: Dec, sc 15, dec (17 sts), ch 1, turn.
Row 18: Dec, sc 13, dec (15 sts), ch 1, turn.
Row 19: Dec twice, sc 7, dec twice (11 sts), ch 1, turn.
Row 20: Dec twice, sc 3, dec twice (7 sts), ch 1, turn.
Row 21: Inc, sc 5, inc (9 sts), ch 1, turn.
Row 22: Inc, sc 7, inc (11 sts), ch 1, turn.
Rows 23-24: Sc in each st (11 sts), ch 1, turn.
Row 25: Dec, sc 7, dec (9 sts), ch 1, turn.
Row 26: Dec twice, sc 1, dec twice (5 sts), ch 1, turn.
Row 27: Dec, sc 1, dec (3 sts).
Tie off. Weave ends to the back. Set aside.

Back Panel (make 1):
Row 1: In MC, ch 8, starting in 2nd ch from hook, sc in each ch (7 sts), ch 1, turn.
Row 2: Inc twice, sc 3, inc twice (11 sts), ch 1, turn.
Row 3: In MC work an inc in the first st, in the next st work [sc in MC, sc in CC] in the same st, in CC sc 7,
in the next st work [sc in CC, sc in MC] in the same st, in MC work an inc in the last st (15 sts), ch 1, turn.
Row 4: In MC work an inc in the first st, in CC sc 13, in MC work an inc in the last st (17 sts), ch 1, turn.
Rows 5-27: In CC, work rows 5 to 27 the same as for the Front Panel.
Tie off. Weave ends to the back. Set aside.

Hair (make 1):
Hair Piece 1:
Row 1: In CC ch 5, starting in 2nd ch from hook, sc in each ch (4 sts), ch 1, turn.
Row 2: Inc twice, sc 2 (6 sts), ch 1, turn.
Row 3: Sc 5, inc (7 sts), ch 1, turn.
Row 4: Sc 5, dec (6 sts).
Tie off. Set aside.

Hair Piece 2:
Row 1: In CC ch 5, starting in 2nd ch from hook, sc in each ch (4 sts), ch 1, turn.
Row 2: Sc 2, inc twice (6 sts), ch 1, turn.
Row 3: Inc twice, sc 4 (8 sts), ch 1, turn.
Row 4: Sc 7, inc (9 sts), ch 1, turn.
Row 5: Inc twice, sc 7 (11 sts), ch 1, turn.
Row 6: Sc 10, inc (12 sts), ch 1, turn.
Row 7: Inc, sc 9, dec (12 sts), ch 1, turn.
Row 8: With the WS facing, sc 12, fsc 1, join Hair Piece 1 by sc 6 across (19 sts), ch 1, turn.
Row 9: Dec, sc 15, dec (17 sts), ch 1, turn.
Row 10: Dec, sc 13, dec (15 sts), ch 1, turn.
Row 11: Dec twice, sc 7, dec twice (11 sts), ch 1, turn.
Row 12: Dec twice, sc 3, dec twice (7 sts), ch 1, turn.
Row 13: Inc, sc 5, inc (9 sts), ch 1, turn.
Row 14: Inc, sc 7, inc (11 sts), ch 1, turn.
Rows 15-16: Sc in each st (11 sts), ch 1, turn.
Row 17: Dec, sc 7, dec (9 sts), ch 1, turn.
Row 18: Dec twice, sc 1, dec twice (5 sts), ch 1, turn.
Row 19: Dec, sc 1, dec (3 sts), ch 1, turn.
Tie off. Weave ends to the back. Set aside.

Ribbon (make 1):
Row 1: Ch 31, starting in 2nd ch from hook, slst in each ch (30 sts)
Tie off. Set aside.

Leaf Embellishment (make 1):
Row 1: In fine weight yarn, ch 5, starting in 2nd ch from hook, slst in first ch, [sc, picot, sc] in the same st, [hdc, picot, hdc] in the same st, 4 hdc in last ch, working on opposite side of chain [hdc, picot, hdc] in same st, [sc, picot, sc] in same st, [slst, picot, slst] in last st.
Tie off. Set aside.
Move on to assembly below!

Assembly:
1- Using black crochet thread, stitch happy eyes onto the front panel between rows 7-8. The eyes should be 3 sts in from each side and each eye will span about 4 sts wide and 1 st high. Use black sewing thread and a sewing needle to stitch them in place. 
2- Using pink yarn, stitch a nose between the eyes at row 6, spanning 2 sts. Stitch around the sts several times to create a small bump.
3- Using black crochet thread, stitch a mouth onto the front body panel spanning two sts diagonally over row 4.
4- Stack the panels as follows: back panel on bottom, front panel in the middle, hair on top. Make sure all the yarn ends of the panels are facing inward so that they are hidden. Match up all rows with the front/right side facing you. Starting near the top on the left side of the bun, begin attaching the panels together by inserting your hook through all three panels and single crocheting around the outside edge of the panels starting in grey (see photos below). Once you’ve crocheted down to the edge of the hair, switch to MC yarn. Now you will be crocheting through only two panels (the front and back). Continue crocheting down around the bottom and part way up the other side, switching back to grey when you reach the hair on the other side; you will now be crocheting through three panels again! Crochet up to the base of the bun. Stop here and stuff. Insert stuffing into the space between the front and back panels (i.e. NOT the space between the hair and front panel). Continue crocheting up and around the bun, stuffing as you go. Slst to beginning stitch to close and weave ends.
5- Wrap the ribbon around the base of the bun from back to front so that the ends overlap on the front/side of the bun. Use the yarn ends to stitch the ribbon in place.
6- Use yarn ends of the leaf to stitch the leaf embellishment to the hair, above the ribbon.
7- Apply blush to the cheeks if desired.

More Amigurumi Ornament Ideas:

Materials:
(Affiliate links coming at you!)
– 2.75mm hook for main ;
– Main Colour (MC) – Hobbii Friends Cotton 8/6 in color 03 (Oatmilk) for skin (less than 50g);
– Contrasting Colour (CC) – Hobbii Rainbow Cotton 8/6 in color 07 (Brown) for hair (less than 50g);
– Rainbow Cotton 8/6 in color 46 (Old Rose) for nose (small amount);
– Green/Yellow Hat:
* Hobbii Rainbow Cotton 8/6 in color 55 (Sunny Yellow) (less than 50g);
* Hobbii Friends Cotton 8/6 in color 103 (Parakeet) (less than 50g);
– Red/Green Hat:
* Hobbii Friends Cotton 8/6 in color 41 (Pomegranate) (less than 50g);
* Hobbii Friends Cotton 8/6 in color 105 (Emerald) (less than 50g);
– Pink Striped Hat:
* Hobbii Rainbow Cotton 8/6 in color 62 (Light Pink) (less than 50g);
* Hobbii Rainow Cotton 8/6 in color 44 (Rose) (less than 50g)
* Hobbii Rainbow Cotton 8/6 in color 25 (Pastel Mint) (less than 50g);
– Black crochet thread;
– 9mm Safety eyes;
– Stuffing;
– Tapestry needle.

Terms and Stitches:
Ch – Chain
Slst – Slip stitch
MR – Magic Ring
Sc – Single Crochet
Inc – Increase. Work a regular sc increase
Inc twice – Work a regular sc increase in each of the next 2 sts
Dec – Decrease. Work a regular sc decrease
Dec twice – Work a regular sc decrease two times over the next 4 sts.
Sc3tog – Single crochet three stitches together
Hdc – Half double crochet
Dc – Double crochet

Invisible join – After last st, cut yarn and pull up on the working loop until the yarn tail is pulled all the way through. With tapestry needle, thread yarn tail through the next st from back to front and then down into the centre of the “V” of the last st worked. Pull tight. Weave ends.,

Amigurumi Crochet Elf Ornament Free Pattern:

Front Panel (make 1):
Row 1: In MC yarn, ch 8, starting in 2nd ch from hook, sc in each ch (7 sts), ch 1, turn.
Row 2: Inc twice, sc 3, inc twice (11 sts), ch 1, turn.
Row 3: Inc twice, sc 7, inc twice (15 sts), ch 1, turn.
Row 4: Inc, sc 13, inc (17 sts), ch 1, turn.
Row 5: Inc, sc 15, inc (19 sts), ch 1, turn.
Row 6: Sc in each st across (19 sts), ch 1, turn.
Row 7: Inc, sc 17, inc (21 sts), ch 1, turn.
Rows 8-10: Sc in each st across (21 sts), ch 1, turn.
Start colourwork in next row.
Rows 11-12: In CC sc 1, in MC sc 19, in CC sc 1 (21 sts), ch 1, turn.
Row 13: Sc 2, in MC sc 17, in CC sc 2 (21 sts), ch 1, turn.
Row 14: Sc 3, in MC sc 15, in CC sc 3 (21 sts), ch 1, turn.
Row 15: Dec, sc 3, in MC sc 11, in CC sc 3, dec (19 sts), ch 1, turn.
Remaining rows are worked entirely in CC.
Row 16: Sc in each st across (19 sts), ch 1, turn.
Row 17: Dec, sc 15, dec (17 sts), ch 1, turn.
Row 18: Dec, sc 13, dec (15 sts), ch 1, turn.
Row 19: Dec twice, sc 7, dec twice (11 sts), ch 1, turn.
Row 20: Dec twice, sc 3, dec twice (7 sts), ch 1, turn.
Row 21: Dec, sc 3, dec (5 sts).
Tie off. Weave ends to the back. Set aside.

Back Panel (make 1):
Row 1: In MC yarn, ch 8, starting in 2nd ch from hook, sc in each ch (7 sts), ch 1, turn.
Row 2: Inc twice, sc 3, inc twice (11 sts), ch 1, turn.
Row 3: Inc, in the next st work (sc 1, in CC sc 1) all into the same st, continuing in CC sc 7, in the next st work (sc 1, in MC sc 1) all into the same st, inc (15 sts), ch 1, turn.
Row 4: Inc, in CC sc 13, in MC inc (17 sts), ch 1, turn.
All remaining rows are worked entirely in CC.
Row 5: In CC inc, sc 15, inc (19 sts), ch 1, turn.
Row 6: Sc in each st across (19 sts), ch 1, turn.
Row 7: Inc, sc 17, inc (21 sts), ch 1, turn.
Rows 8-14: Sc in each st across (21 sts), ch 1, turn.
Row 15: Dec, sc 17, dec (19 sts), ch 1, turn.
Row 16: Sc in each st across (19 sts), ch 1, turn.
Row 17: Dec, sc 15, dec (17 sts), ch 1, turn.
Row 18: Dec, sc 13, dec (15 sts), ch 1, turn.
Row 19: Dec twice, sc 7, dec twice (11 sts), ch 1, turn.
Row 20: Dec twice, sc 3, dec twice (7 sts), ch 1, turn.
Row 21: Dec, sc 3, dec (5 sts).
Tie off. Weave ends to the back. Set aside.

Ears (make 2):
Rnd 1: In MC work 4 sc into a MR (4 sts)
Rnd 2: Sc in each st around (4 sts)
Rnd 3: Inc in first st, sc 3 (5 sts)
Rnd 4: Inc twice, sc 3 (7 sts)
Rnd 5: Inc in each of the next 3 sts, sc 4 (10 sts)
Rnd 6: Sc in each st around (10 sts)
Rnd 7: Sc 6, dec twice (8 sts)
Rnd 8: Dec, sc 4, dec (6 sts)
Tie off. No need to stuff. Flatten and set aside.

Curls (make 3):
Row 1: In CC, ch 11, starting in 2nd ch from hook, sc in each st (10 sts)
Tie off. Twist the ends to curl them. Set aside.

Hat Panel (make 2):
Row 1: Ch 20, starting in 2nd ch from hook, sc in each ch across (19 sts), ch 1, turn.
Rows 2-3: Sc in each st across (19 sts), ch 1, turn.
Row 4: Dec, sc 15, dec (17 sts), ch 1, turn.
Row 5: Dec, sc 13, dec (15 sts), ch 1, turn.
Row 6: Sc in each st across (15 sts), ch 1, turn.
Row 7: Dec, sc 11, dec (13 sts), ch 1, turn.
Row 8: Dec, sc 9, dec (11 sts), ch 1, turn.
Row 9: Sc in each st across (11 sts), ch 1, turn.
Row 10: Dec, sc 7, dec (9 sts), ch 1, turn.
Row 11: Dec, sc 5, dec (7 sts), ch 1, turn.
Row 12: Dec, sc 3, dec (5 sts), ch 1, turn.
Row 13: Sc in each st across (5 sts), ch 1, turn.
Row 14: Dec, sc 1, dec (3 sts), ch 1, turn.
Row 15: Sc3tog (1 st).

Tie off. With the front of the hat facing you, insert your hook into the lower right hand corner and single crochet around two sides to join them, leaving the bottom open. Work 4 sc into the top stitch to crochet around the tip of the hat.
For the Green/Yellow hat: Work 5 rows in green, then 5 rows in yellow, then 5 rows in green.
For the Pink Striped hat: Alternate working 3 rows in dark pink and 3 rows in light pink.
For the multicolour hat: Work 2 rows of each colour.

Optional Hat Trim:
Turn hat so the pointed end is downward. Insert your hook into the side of the hat where the two panels are joined and join yarn.
Row 1: Sc in each ch around and work an inc at each join (42 sts), join with a slst, ch 1, turn.
Row 2: *Sc, sk 2 sts, 5 dc into the next st, sk 2 sts, repeat from * 6 more times, slst to beginning st.
Tie off. Weave ends. Fold the brim upwards onto the hat. Stitch down in a couple of places to secure if needed.
Move on to assembly below!

Assembly:
1- Using contrasting colour yarn, stitch the three curls onto the middle of the front panel between rows 19 and 20. When laying flat, the curls should extend down below the hairline by 4 or 5 rows. Weave ends.
2- Insert 9mm safety eyes into the front panel between rows 7 and 8 with approximately 9 or 10 sts between them.
3- With a tapestry needle and colour “Old Rose”, stitch a nose between the eyes at row 6.
4- With black crochet thread or fine weight yarn, stitch a mouth at row 4 by stitching diagonally across two stitches.
5- With black crochet thread or fine weight yarn, stitch eyebrows above each eye by stitching diagonally over rows 10-12.
6- Add rosy cheeks if desired using pink yarn, or apply blush/pastel chalk.
7- Place both panels together, matching up all rows and with the front facing you. Starting near the top on the left side, begin attaching the panels together by inserting your hook through both panels and single crocheting around the outside edge of the panels starting in contrasting colour. Switch to main colour when you reach the skin. Crochet around, switching back to contrasting colour for the hair when needed. When only the top remains open, stuff firmly. Continue crocheting around and close with an invisible join. Weave ends.
8- Stitch ears to either side of the face at rows 6-10 (i.e. just below where the hair starts). Weave ends.
9- Place hat on elf and adjust curls so that they curl up over the brim of the hat. Stitch hat in place in a few places around (or pin in place if you don’t want to permanently attach the hat).
10- Attach a hanging loop to the top of the hat.
You’re done!

More Amigurumi Ornament Ideas:

Materials:
(Affiliate links coming at you!)
– 2.75mm hook for main (I use THESE hooks!);
– Any light weight yarn in the following colours:
* Skin (MC) (I used Hobbii Friends Cotton 8/6 Color 03, approx 25g);
* Red (I used Hobbii Friends Cotton 8/6 Color 41, approx 15g);
* White (I used Hobbii Rainbow Cotton 8/6 Color 01, approx 25g)
* Light pink for nose (I used Hobbii Rainbow Cotton 8/6 Color 46, small amount);
– 9mm safety eyes;
– Stitch markers;
– Stuffing;
– Tapestry needle.

Terms and Stitches:
Ch – Chain
Slst – Slip stitch
Sc – Single Crochet (again, in rows with colour changes, sc stitches will be indicated with the Colour Legend letter instead of “sc”)
Inc – Increase. Work a regular sc increase
Dec – Decrease. Work a regular sc decrease
Hdc – Half double crochet

Amigurumi Crochet Santa Claus Ornament Free Pattern:

Panels (make 2):

Row 1: In MC, ch 8, starting in 2nd ch from hook, sc in each ch (7 sts), ch 1, turn.
Row 2: Inc twice, sc 3, inc twice (11 sts), ch 1, turn.
Row 3: Inc twice, sc 7, inc twice (15 sts), ch 1, turn.
Row 4: Inc, sc 13, inc (17 sts), ch 1, turn.
Row 5: Inc, sc 15, inc (19 sts), ch 1, turn.
Row 6: Sc in each st (19 sts), ch 1, turn.
Row 7: Inc, sc 17, inc (21 sts), ch 1, turn.
Rows 8-14: Sc in each st (21 sts), ch 1, turn.
Place a stitch marker in the first and last stitch of row 8.
Row 15: Dec, sc 17, dec (19 sts), ch 1, turn.
Row 16: Sc in each st (19 sts), ch 1, turn.
Row 17: Dec, sc 15, dec (17 sts), ch 1, turn.
Row 18: Dec, sc 13, dec (15 sts), ch 1, turn.
Row 19: Dec twice, sc 7, dec twice (11 sts), ch 1, turn.
Row 20: Dec twice, sc 3, dec twice (7 sts), ch 1, turn.
Row 21: Dec, sc 3, dec (5 sts).
Tie off. Weave ends to the back. Set aside.

Beard (make 1):

Rnd 1: In white, work 6 sc into a MR (6 sts)
Rnd 2: *Inc, sc 2, repeat from * once more (8 sts)
Rnd 3: Sc, inc, sc 3, inc, sc 2 (10 sts)
Rnd 4: Sc, inc in next 3 sts, sc 2, inc in next 3 sts, sc (16 sts)
Rnd 5: Sc 2, inc in next 3 sts, sc 5, inc in next 3 sts, sc 3 (22 sts)
Rnd 6: Sc 3, inc in next 3 sts, sc 9, inc in next 3 sts, sc 4 (28 sts)
Rnd 7: Sc 5, inc in next 3 sts, sc 11, inc in next 3 sts, sc 6 (34 sts)
Rnd 8: Sc in each st (34 sts)
Rnd 9: Sc 7, inc in next 3 sts, sc 14, inc in next 3 sts, sc 7 (40 sts)
Rnds 10-15: Sc in each st (40 sts)
Tie off. Stuff lightly. Flatten the top edge and insert hook into the first st through both layers. Continue to round 16.
Row 16: Sc 20 across to close, topping up stuffing as you go, ch 1, turn.

Sideburns:
Row 1: Sc 3, leave remaining sts unworked (3 sts), ch 1, turn.
Rows 2-5: Sc in each st (3 sts), ch 1, turn.
Row 6: Sc, dec (2 sts), ch 1, turn.
Row 7: Dec (1 st).
Tie off. With RS facing, insert hook into last st of beard (row 16) and repeat rows 1-7 of Sideburns

Moustache (make 2):
Rnd 1: In white, work 6 sc into a MR (6 sts)
Rnd 2: *Sc 2, inc, repeat from * once more (8 sts)
Rnd 3: *Sc 3, inc, repeat from * once more (10 sts)
Rnd 4: Sc in each st (10 sts)
Rnd 5: Dec, sc 8 (9 sts)
Rnd 6: Dec, sc 7 (8 sts)
Rnd 7: Dec, sc 6 (7 sts)
Rnd 8: Dec three times, sc 1 (4 sts)
Tie off. Using a tapestry needle, weave the end through each stitch and pull to close.

Hat (make 1):
Brim:
Row 1: In white, ch 10, starting in 3rd ch from hook, hdc in each ch (8 sts), ch 1, turn.
Row 2: Hdc in each st (8 sts), ch 1, turn.
Rows 3-30: Repeat row 2.

Tie off. Fold brim upwards so that long edges are touching. Insert hook through both edges and sc 30 to create a long folded brim. Slst the short ends together to create a circle. Tie off.

Hat Body:
Rnd 1: In red, insert hook into a st at the back of the brim, Hdc in each st, hdc 2 at the seam (32 sts)
Rnd 2: Hdc dec, Hdc 28, Hdc dec (30 sts)
Rnd 3: *Hdc 13, hdc dec, repeat from * once more (28 sts)
Rnd 4: *Hdc 5, hdc dec, repeat from * three more times (24 sts)
Rnd 5: *Hdc 6, hdc dec, repeat from * two more times (21 sts)
Rnd 6: *Hdc 5, hdc dec, repeat from * two more times (18 sts)
Rnd 7: *Hdc 4, hdc dec, repeat from * two more times (15 sts)
Rnd 8: *Hdc 3, hdc dec, repeat from * two more times (12 sts)
Rnd 9: *Hdc 1, hdc dec, repeat from * three more times (8 sts)
Rnd 10: *Hdc 2, hdc dec, repeat from * once more (6 sts)
Rnd 11: *Hdc 1, dec, repeat from * once more (4 sts)
Tie off. Weave ends.

Pompom:
Rnd 1: In white, work 6 sc into a MR (6 sts)
Rnd 2: Inc in each st (12 sts)
Rnds 3-5: Sc in each st (12 sts)
Rnd 6: Dec around (6 sts)
Tie off. Stuff. Weave yarn end through each st and pull to close. Stitch to tip of hat. Weave ends.
Move on to assembly below!

Assembly:
1- Insert 10mm safety eyes into the front panel between rows 13-14. The eyes should be approximately 6 sts in from each side, with approximately 5 sts between them.
2- Stack the panels as follows: back panel on bottom, front panel in the middle, beard on top. Make sure all the yarn ends of the panels are facing inward so that they are hidden. Match up all rows with the front/right side facing you. The bottom of the side burns/row 16 of the beard should line up with the stitch markers at row 8 (see photos below). Starting near the top of the head on the left side, begin attaching the panels together by inserting your hook through the two panels and single crocheting around the outside edge of the panels starting in MC. Once you’ve crocheted down to the top edge of the sideburn, switch to white yarn. Now you will be crocheting through all three panels (the sideburn, the front, and the back). Continue crocheting down the sideburn. Once you reach the main part of the beard, you will switch to MC and resume crocheting in the two panels only. Crochet down around the bottom and part way up the other side, switching back to white when you reach the sideburn on the other side; you will now be crocheting through three panels again! Crochet up the sideburn. Switch back to MC after the sideburn. Now you are back to crocheting in two panels only. Stop here and stuff. Continue crocheting up and around the head, stuffing as you go. Slst to beginning stitch to close and weave ends.
3- Stitch the moustache pieces onto the front at rows 8-11 (they will overlap onto the top of the beard slightly).
4- In pink yarn, stitch a nose around two stitches at row 11. The nose will be between the eyes and immediately above where the moustache pieces touch. Stitch several times to create a small bump.
5- In white yarn, stitch eyebrows diagonally over the eyes at rows 17-18 spanning about 2 stitches.
6- Place the hat jauntily on the head and stitch in place.
7- Add blush to cheeks if desired.

More Amigurumi Ornament Ideas:

Materials:
– 3.25mm hook for main (I use THESE hooks!);
– Red Heart Super Saver in Cafe Latte;
– Bernat Super Value in White;
– Caron Simply Soft in Harvest Red for nose (It’s so shiny! Perfect for Rudolph);
– Bernat Premium Tweeds in Chocolate Tweed for antlers;
– Black Crochet thread for eyes and mouth;
– Stuffing;
Tapestry needle.

Terms and Stitches:
Ch – Chain
Slst – Slip stitch
Sc – Single Crochet (again, in rows with colour changes, sc stitches will be indicated with the Colour Legend letter instead of “sc”)
Inc – Increase. Work a regular sc increase
Dec – Decrease. Work a regular sc decrease
Hdc – Half double crochet

Amigurumi Crochet Reindeer Ornament Free Pattern:

Front Body Panel:
You will make 1 panel using a 3.25mm hook. Start with White. The panel is worked from the bottom up. Ch 1 and turn at the end of each row unless specified otherwise.
Rows 1 to 8 are worked entirely in white.
Row 1: Ch 8, starting in second ch from hook, sc 7 (7 sts)
Row 2: Inc twice, sc 3, inc twice (11 sts)
Row 3: Inc twice, sc 7, inc twice (15 sts)
Row 4: Inc, sc 13, inc (17 sts)
Row 5: Inc, sc 15, inc (19 sts)
Row 6: Sc across (19 sts)
Row 7: Inc, sc 17, inc (21 sts)
Row 8: Sc across (21 sts)
In the next row we will start the colour work.
Rows 9-10: W10, B1, W10 (21 sts)
Rows 11-12: B1, W8, B3, W8, B1 (21 sts)
Rows 13: B2, W6, B5, W6, B2 (21 sts)
Row 14: B3, W4, B7, W4, B3
All remaining rows are worked entirely in brown.
Row 15: Dec, sc 17, dec (19 sts)
Row 16: Sc across (19 sts)
Row 17: Dec, sc 15, dec (17 sts)
Row 18: Dec, sc 13, dec (15 sts)
Row 19: Dec twice, sc 7, dec twice (11 sts)
Row 20: Dec twice, sc 3, dec twice (7 sts)
Row 21: Dec, sc 3, dec (5 sts)
Tie off. Set aside for assembly later.

Back Body Panel:
Using 3.25mm hook and brown yarn. The back panel is worked exactly the same as the front panel except it’s worked entirely in brown without any colour-work.
Ch 1 and turn at the end of each row unless specified otherwise.
Row 1: Ch 8, starting in second ch from hook, sc 7 (7 sts)
Row 2: Inc twice, sc 3, inc twice (11 sts)
Row 3: Inc twice, sc 7, inc twice (15 sts)
Row 4: Inc, sc 13, inc (17 sts)
Row 5: Inc, sc 15, inc (19 sts)
Row 6: Sc across (19 sts)
Row 7: Inc, sc 17, inc (21 sts)
Rows 8-14: Sc across (21 sts)
Row 15: Dec, sc 17, dec (19 sts)
Row 16: Sc across (19 sts)
Row 17: Dec, sc 15, dec (17 sts)
Row 18: Dec, sc 13, dec (15 sts)
Row 19: Dec twice, Sc 7, dec twice (11 sts)
Row 20: Dec twice, sc 3, dec twice (7 sts)
Row 21: Dec, sc 3, dec (5 sts)
Tie off. Set aside for assembly later.

Nose (make 1):
In red yarn using a 3.25mm hook.
Rnd 1: Work 8 hdc into a magic ring (8 sts), join.
Tie off, leaving a long tail for stitching it on. Set aside for assembly later.

Front Ear (make 2):
Using 3.25mm hook and starting with white yarn.
Rnd 1: Ch 4, sc 2, 3 sc in last ch, working on the opposite side of chain, sc 1, 2 sc in last ch, join with brown yarn, ch 2 (8 sts)
Rnd 2: Starting in same st as ch 2, hdc inc, hdc 2, hdc inc in next 2 sts, hdc 2, hdc inc, join (12 sts)
Tie off, leaving a long tail for stitching it on.

Back Ear (make 2):
Using 3.25mm hook and with brown yarn, repeat rounds 1 and 2 of the front ear but in brown only.
Place the front ear panel on top of the back ear panel and crochet the two pieces together by crocheting around the two pieces in brown, joining them. Stuff lightly when you’ve crocheted about two-thirds of the way around. Join with a slst to first st and tie off. Poke the yarn tail back inside.

Antlers (make 4):
Using 3.25mm hook and using dark brown yarn.
Row 1: Ch 2, Sc 1 (1 st)
Rows 2-6: Sc 1 (1 st)
Row 7: Inc (2 sts)
Row 8: In first st only (leave other st unworked), sc 1 (1 st)
Rows 9-11: Sc 1 (1 st)
Tie off. Rejoin yarn in the unworked st of row 7 and repeat rows 8-11. Tie off.
Repeat all of the above for the back panel. Weave in ends and trim them (so they don’t get in the way while joining). Place both panels together and sc around to join. You don’t need to stuff the antlers (there’s really no space to insert stuffing anyway!)
Repeat all of the above for the second antler.
Move on to assembly below!

Assembly:
Step 1: Face
First, we need to attach and stitch on our facial features to the front panel.
Stitch on the nose at the base of the brown stripe on the face.
Finally, stitch on a little mouth.

Step 2: Body, Ears and Antlers
Here are the pieces you should now have at this step.
Cut off two lengths of brown yarn approximately 30cm/12″ long each and set them aside for later.
Place the two panels together, matching up all sides and colours.

Make sure the front of Rudolph is facing you as you crochet around the outside.
Starting on the left side, in the middle where the white section starts, begin attaching the panels together by single crocheting around the outside of the panels starting in white.

Be sure to crochet loosely around so that the edge keeps it’s nice curve!
Crochet down and around the bottom and up the other side; switch to brown yarn where appropriate.
Stop after two or three stitches and pull up a loop.
Now we will attach the first ear and antler. The ear will overlap the antler slightly; feel free to stitch these together first before stitching them between the panels if it’s easier for you.

With your tapestry needle and a length of yarn that you set aside earlier, place the ear and the antler between the panels just to the right of the end of the last row of the panels. Stitch in place by stitching through all three pieces, the back panel, the ear/antler and the front panel. Once in place, tie a knot in the yarn tails and hide them between the panels.

Continue crocheting around. When you get to the ear/antler, sc in the stitches of the front panel only. This section is already sewn shut so it’s just for looks!
Stuff your ornament firmly now!

Continue crocheting both panels together as normal once past the antler, topping up stuffing as you go.
Place and stitch on the second antler and ear the same way you did for the first.
Top up stuffing. Use the back of your crochet hook to even out the stuffing and keep the shape nice and round.
When you are satisfied with the stuffing, close with a slst to first st. Tie off. With your tapestry needle, poke the yarn tail back inside the piece. Add the loop for hanging, and you’re done!

More Amigurumi Ornament Ideas:

MATERIALS
– Light worsted/DK weight yarn (3 ply) in any two colors. For my ornaments, I used a mix of Amigo from Hobbii and Paintbox Yarns Simply DK from LoveCrafts. A note on yarn weight: This pattern calls for DK/light worsted yarn to achieve the sizes stated. If you use regular worsted weight/Aran, your ornaments will turn out significantly larger than mine. Please keep this in mind when selecting your yarn.
– C (2.75 mm) crochet hook
– 7.5 mm black safety eyes
– Fiberfill (or your stuffing of choice) 
– Bent tip tapestry needle
– Scissors 
– Stitch marker 
– Black embroidery floss
– Sharp sewing needle

ABBREVIATION KEY
Abbreviations are in U.S. terms.

sc – single crochet
st/sts – stitch(es)
sl st – slip stitch
dec – decrease (join the next 2 stitches together)
inc – increase (2 single crochet in the next stitch)
R1 – round 1
rep – repeat
** – repeat the group of instructions between the asterisks the number of times indicated.

Amigurumi Crochet Vintage Christmas Bauble Free Pattern:

Vintage Christmas Bauble (Starting in Blue Yarn)
R1: ch 2, starting in the 2^nd ch from hook, sc 4 (4 sts) (you can use the magic circle if you prefer as it won’t make a difference in the end. In that case, you will make a magic circle and make 4 sc in the magic circle. Watch this short video to learn how to make the “ch 2 method”.)
R2: *sc 1, inc* rep 2 times (6 sts)
R3: *sc 1, inc* rep 3 times (9 sts)
R4: sc in all 9 sts (9 sts)
R5: *sc 2, inc* rep 3 times (12 sts)
R6: *sc 1, inc* rep 6 times (18 sts)
Switch to cream yarn (see “Important note about color changes” under “Important Additional Info.)
R7: *sc 2, inc* rep 6 times (24 sts)
Switch to blue yarn
R8: sc in all 24 sts (24 sts)
R9: *sc 3, inc* rep 6 times (30 sts)
R10: *sc 4, inc* rep 6 times (36 sts)
R11: sc 2, *switch to cream and sc 2, switch to blue and sc 4* rep 5 times, switch to cream and sc 2, switch to blue and sc 2

Continue in blue yarn
R12: *sc 5, inc* rep 6 times (42 sts)
Switch to cream yarn. 
R13: *insert your hook in between the two sc sts two rounds below the round we’re currently on and make a sc, sc 5, inc* rep 6 times (48 sts)
Switch to blue yarn
R14: *sc 7, inc* rep 6 times (54 sts)
R15-16: sc in all 54 sts (2 rounds total at 54 sts each)
R17: *sc 7, dec* rep 6 times (48 sts)
R18: *sc 6, dec* rep 6 times (42 sts)
R19: sc in all 42 sts (42 sts)
Switch to cream yarn
R20: *sc 5, dec* rep 6 times (36 sts)
R21: *in cream yarn sc 2, switch to blue and sc 4* rep 6 times (36 sts)
Continue in blue yarn
R22: *sc 4, dec* rep 6 times (30 sts)
R23: sc in all 30 sts (30 sts)

Making the Face
Insert your 7.5 mm safety eyes between R16 & 17 of the head spaced 9 sts apart (Hint: Insert the 1st eye. Count 9 sts from the hole where you inserted the 1st eye and insert the 2nd eye. There should be 7 visible sts between the two eyes.

Using your black embroidery floss and sharp needle, embroider a smile centered between the eyes over R16 of the head. The smile should be about 3 sc sts wide.
Start to stuff the ornament, continuing as you go.
Switch to cream yarn
R24: *sc 3, dec* rep 6 times (24 sts)
Switch to blue yarn
R25: sc in all 24 sts (24 sts)
R26: *sc 2, dec* rep 6 times (18 sts)
Finish off leaving a short tail. Finish stuffing the ornament firmly and set aside until you make the ornament top.

Ornament top for Bauble (Using Gold Yarn)
R1: ch 2, starting in the 2^nd ch from hook, sc 6 (6 sts)
R2: *inc* rep 6 times (12 sts)
R3: *sc 1, inc* rep 6 times (18 sts)
R4: in BLO sc in all 18 sts (18 sts) (This is the only round we will crochet in the BLO.)
R5: sc in all 18 sts (18 sts)
Finish off and leave a long tail for sewing. Since both the last round of the ornament and the last round of the top have 18 sts, the two pieces will line up perfectly.
Using the whipstitch, sew the two pieces together. Add a little stuffing to the top when you are about three-fourths of the way around. When finished, knot the finishing tail from the ornament we left to the remaining sewing tail of the top to secure the sewing and weave the tails into the body to finish.

Adding the Loop for Hanging our Amigurumi Bauble
Now, we will add the loop on the top of the ornament to hang it on the tree. To do this, take a length of gold yarn and thread it through your tapestry needle. Now, pull the yarn about halfway through the center round on the top of the ornament. Knot the two ends together and then cut the excess tails off. Now hide the knot in the inside of the ornament top by pushing it through the center round of the top. 

Congratulations!!!
More Amigurumi Christmas Ornament Ideas:

SIZE:
Width = 7 cm. Length = 7 cm. Height = 9 cm.

YARN:
DROPS MERINO EXTRA FINE from Garnstudio (belongs to yarn group B)
50 g colour 01, off white
50 g colour 32, dark rose
50 g colour 49, chocolate
50 g colour 47, sage green

ACCESSORIES:
Wadding.
30 cm silk ribbon (width 0.5 cm) for ex. colour brown for loop.

The house weighs approx. 30 g without wadding.

NEEDLES:
DROPS DOUBLE POINTED NEEDLES SIZE 3 MM.

CROCHET HOOK:
DROPS CROCHET HOOK SIZE 3 MM.

KNITTING TENSION:
23 stitches in width and 32 rows in height with stocking stitch = 10 x 10 cm.
NOTE: Needle size is only a guide. If you get too many stitches on 10 cm, change to a larger needle size. If you get too few stitches on 10 cm, change to a smaller needle size.

Amigurumi Winter’s Home Ornament Free Pattern:

GARTER STITCH (worked in the round):
1 ridge vertically = 2 rounds, i.e. knit 1 round and purl 1 round.

PATTERN:
See diagram A.1. The diagram shows all rows in the pattern from the right side.

STRIPES:
* 1 ridge in colour off white, 3 ridges in colour chocolate *, work from *-* a total of 3 times but, on the last repeat, finish after 2 ridges in colour chocolate = 22 rounds of stripes.

INCREASE TIP:
Increase 1 stitch on each side of the marker-stitch as follows: Knit 1 in both the front and back loops of the stitch before the marker-stitch, knit the marker-stitch, knit 1 in both the front and back loops of the next stitch (2 increased stitches). Repeat at each marker-stitch.

DECREASE TIP-1:
Work until there are 2 stitches left before the marker-stitch, purl 2 together, purl the marker-stitch, purl 2 twisted together (2 decreased stitches). Repeat at each marker-stitch.

DECREASE TIP-2:
Decrease on a knitted round.
AFTER MARKERS 1 AND 3:
Knit 2 twisted together.
BEFORE MARKERS 2 AND 4:
Work until there are 2 stitches left before the marker, knit 2 together.

HOUSE – SHORT OVERVIEW OF THE PIECE:
The piece is worked in the round with double pointed needles, bottom up. The floor is worked first, then the walls and the roof to finish. The door and windows are embroidered with flat stitch and a picot edge is worked around the roof. The piece is filled with wadding before the roof is sewn together and ribbon fastened at the top for the loop.

FLOOR:
Cast on 8 stitches with double pointed needles size 3 mm and colour sage green DROPS Merino Extra Fine. Divide the stitches equally onto 4 needles with 2 stitches on each needle. Purl 1 round.
Insert 1 marker in the last stitch on each needle (4 markers). Work GARTER STITCH in the round – read description above. AT THE SAME TIME on each knitted round, increase 1 stitch on each side of each marker-stitch – read INCREASE TIP (8 increased stitches). Increase like this a total of 8 times = 72 stitches (the beginning of the round is the middle of one side).
After the last increase-round, purl 1 round and decrease 1 stitch on each side of all marker-stitches – read DECREASE TIP-1 = 64 stitches (8 decreased stitches). There are 15 stitches between each marker-stitch. The floor measures approx. 4 cm from the middle outwards. Now work the walls.

WALLS:
Keep the markers in place; they now mark the corners of the house. Change to colour chocolate and work A.1 in the round (the marker-stitches should match the garter stitches in the pattern). REMEMBER THE KNITTING TENSION!
When you have worked 2 rounds with colour chocolate, change to colour dark rose. Work 10 rounds of A.1 with colour dark rose. The walls measure approx. 4 cm in height. Now work the roof.

ROOF:
Change to colour off-white. Work garter stitch and STRIPES in the round – read description above. In addition, shape the gables by decreasing AFTER markers 1 and 3 and BEFORE markers 2 and 4 – read DECREASE TIP-2. Decrease like this every 4th round a total of 5 times, then every 2nd round 1 time = 40 stitches.
On the next knitted round, decrease the remaining 3 stitches on each gable as follows: Start after the marker-stitch, slip 1 stitch knit-wise, knit 2 together, pass the slipped stitch over the knitted-together stitches, repeat on the other gable (4 decreased stitches) = 36 stitches.
Cast off with purl. Keep the markers in place.

ASSEMBLY:
Work a row of picot along the top and bottom ridges on the roof using colour off-white (along the long-sides only): Hold the house with the roof towards you (i.e., upside down). Use crochet hook size 3 mm and colour off white. Work 1 double crochet in the marker-stitch, * 4 chain stitches, 1 treble crochet in the first chain stitch worked, skip 1-1½ cm, 1 double crochet in the next stitch *, work from *-* to the next marker-stitch. Cut and fasten the strand. There are 5 picots at the top and 6 picots at the bottom of the roof.

Use colour chocolate and embroider a door with flat stitch in the middle of one wall – see photo.

Use colour off-white and embroider 2 windows on one long side – see photo.

Cut and fasten the strands. Fill the house with wadding. Use colour chocolate and sew the roof together at the top with small stitches.

LOOP:
Thread the silk ribbon through the sewing in the middle of the roof, tie a knot in the end. Pull the ribbon through so the knot is by the roof.

Diagram

	= knit
	= purl
	= Flat stitch, Pictures 1-4 PICTURE 1: Insert the needle from the wrong side to the right side, where you wish the stitch to start. PICTURE 2: Skip your required distance and thread the needle down and up again to where you want the next flat stitch to start, pull the strand through. PICTURE 3: Skip your required distance and thread the needle down and up again to where you want the next flat stitch to start, pull the strand through. Continue like this until you have enough stitches. Fasten the strand on the wrong side. PICTURE 4: Flat stitches of different directions and lengths.

More Amigurumi Ornament Ideas:

SIZE:
Piece measures approx. Circumference = 15 cm Height: = 17 cm

YARN:
DROPS LIMA from Garnstudio (belongs to yarn group B)
50 g colour for edge and tassel: 0100 off white
50 g colour for hat: 3609 red / 0705 olive / 9030 dark ivy

And use:
Some left-over yarn of in colour 0206, wheat – for nose.
1 egg warmer weighs approx. 16 g.

CROCHET HOOK:
DROPS CROCHET HOOK SIZE 3.5 mm.

CROCHET TENSION:
20 double crochets in width and 20 rows vertically on hook size 3.5 mm = 10 x 10 cm.
NOTE! Remember that hook size is only a suggestion. If you have too many stitches on 10 cm switch to larger hook. If you have too few stitches on 10 cm switch to smaller hook.

Amigurumi Ornament Hats Free Pattern:

EGG WARMER – SHORT OVERVIEW OF THE PIECE:
Work in the round bottom up. When the hat is done, fold the edge at the front of hat up and fasten. Work a loose nose that is sewn on at the bottom of the fold, then make 1 tassel which is fastened at the top of hat. Bend the top of hat some-what down and fasten with a couple of stitches.

EGG WARMER:
Use hook size 3.5 mm and colour off white in DROPS Lima.
Crochet a chain stitch ring as explained in diagram A.1. Crochet A.2 (= beginning and end of the round), crochet A.3 a total of 6 times around the chain stitch ring. After 1st round in A.2/A.3 switch to colour red / olive / dark ivy (= colour of the hat itself) and continue with this colour. Remember to follow the crochet tension.
When A.2 and A.3 are worked in height, there are 24 double crochets + 1 chain stitch on the round. Now work as follows: Crochet A.4 (beginning and end of the round), crochet A.5 a total of 4 times in the round. Continue like this. When A.4 and A.5 are done in height, there are 4 double crochets + 1 chain stitch on the round.
Cut the yarn and baste yarn up and down through top of hat, tighten together and fasten.

ASSEMBLY:
Fold the bottom 4-5 round mid front of hat up and fasten fold mid front with a couple of stitches.

NOSE:
Use colour wheat and work after diagram A.6. Cut the yarn (long enough to sew with) and pull yarn through the stitch. Pouf up the stitches to form a nice, round bobble for nose. Fasten nose mid front of hat at the bottom by the fold.

TASSEL:
See diagram A.7 and cut 12 strands with a length of 10 cm in colour off white. Cut 1 strand of 20 cm in colour off white to fasten the tassel. Place this strand over the other strands. Place strand of 10 cm double and tie a new strand in colour off white around the top of tassel (approx. 0.5 cm from fold). Fasten strand tightly and the fasten the tassel at the top of hat. Cut tassel to desired length.

ASSEMBLY:
Fold the top part of hat down and fasten with a couple of stitches in base colour – see photo.

Diagram

	= Start here! Crochet 36 chain stitches and form a ring with 1 slip stitch in the first chain stitch = point on the circle. Note: If you work outermost on the hook the chain stitch will often be too tight; 1 chain stitch should be as long as 1 double / treble crochet is wide.
	= This round is already worked and only shows how to work next round in the chain stitches
	= 1 chain stitch
	= At the beginning of the round crochet 1 chain stitch, end the round with 1 slip stitch in this chain stitch
	= 1 double crochet in the stitch below
	= Decrease 1 stitch by crocheting 2 double crochets together as follows: Crochet 1 double crochet in next stitch but wait with last yarn over and pull through, work 1 double crochet in next stitch but now pull last yarn over through all 3 loops on hook.
	= Start here
	= Crochet direction
	= Nose: Crochet 7 treble crochets in the first chain stitch worked. Pull hook out of piece, insert hook in the 4th chain stitch worked at the beginning, pull loop from last treble crochet worked and pull loop through stitch on hook

More Amigurumi Ornament Ideas:

You will need:
– Vita Baby yarn (100% acrylic, 100 g/400 m)
– 2.0 mm crochet hook
– Fiberfill for pompom
– Yarn needle and scissors

Abbreviations:
R – row
ch – chain
sl st – slip stitch
sc – single crochet
BLO – back loop only

Amigurumi Christmas Ornament Hat Free Pattern:

Two-color hat
Red: make 16 ch, white: 8 ch (24 ch), 1 turning chain
R 1: BLO white: 8 sc, red: 9 sc, 1 sl st, 1 turning chain
R 2: BLO red: 10 sc, white: 8 sc, 1 turning chain
R 3: BLO white: 8 sc, red: 10 sc, 1 sc in R 1, 1 sl st in R 1, 1 turning chain
R 4: BLO red: 12 sc, white: 8 sc, 1 turning chain
R 5: BLO white: 8 sc, red: 12 sc, 1 sc in R 1, 1 sl st in R 1, 1 turning chain
R 6: BLO red: 14 sc, white: 8 sc, 1 turning chain
R 7: BLO white: 8 sc, red: 14 sc, 1 sc in R 1, 1 sl st in R 1, 1 turning chain
R 8: BLO red: 16 sc, white: 8 sc, 1 turning chain
R 9: BLO white: 8 sc, red: only 9 sc, 1 sl st, 1 turning chain
R 10: BLO red: 10 sc, white: 8 sc, 1 turning chain
R 11: BLO white: 8 sc, red: 10 sc, 1 sc in R 9, 1 sl st in R 9, 1 turning chain
Don’t cut the yarn.
Repeat R 1-11 three times.

Fold the hat flat and join sides with sl st.
One color hat for snowman
Make 24 ch, 1 turning chain
R 1: BLO 17 sc, 1 sl st, 1 turning chain
R 2: BLO 18 sc, 1 turning chain
R 3: BLO 18 sc, 1 sc in R 1, 1 sl st in R 1, 1 turning chain
R 4: BLO 20 sc, 1 turning chain
R 5: BLO 20 sc, 1 sc in R 1, 1 sl st in R 1, 1 turning chain
R 6: BLO 22 sc, 1 turning chain
R 7: BLO 22 sc, 1 sc in R 1, 1 sl st in R 1, 1 turning chain
R 8: BLO 24 sc, 1 turning chain
R 9: BLO 17 sc, 1 sl st, 1 turning chain
R 10: BLO 18 sc, 1 turning chain
R 11: BLO white: 18 sc, 1 sc in R 9, 1 sl st in R 9, 1 turning chain
Don’t cut the yarn.

Repeat R 1-11 three times.
Fold the hat flat and join sides with sl st.

Pompom
With white yarn:
R 1: 2 ch, from the 2nd ch from hook: 6 sc [6]
R 2: (inc) repeat 6 times [12]
R 3: (1 sc, inc) repeat 6 times [18]
R 4-5: 18 sc (2 rows)
R 6: (1 sc, dec) repeat 6 times [12]
Stuff.
R 7: (dec) repeat 6 times [6]

Attach a loop for Christams ornamet hat.
Make 25 ch with white yarn.
Sew a loop at the top of hat, and this Christmas ornament is ready to hang.

More Amigurumi Ornament Ideas:

Materials
Yarn:
Colour A: Baby Snuggle in Bright
Red
Colour B: Baby Snuggle in Graphite
Colour C: Baby Snuggle in Sunshine
Colour D: Loops and threads fur yarn in black and white
Ribbon
Hook: 5.5mm
Size: 5×5 in

Amigurumi Santa Donut Ornament Free Pattern

Colour A
Rnd 1: slip knot, chain 16. (16)
Attach 16 th chain to the first chain to make a circle and make a slipknot.
Rnd 2: sc 16 (16)
Rnd 3: (sc,inc)*8 (24)
Rnd 4: (2sc,inc)*8 (32)
Rnd 5: (3sc,inc)*8 (40)
Rnd 6: (4sc,inc)*8 (48)
Rnd 7-11: sc 48 (48)
Rnd 12: (4sc,dec)*8 (40)
Rnd 13: (3sc,dec)*8 (32)
Rnd 14: (2sc,dec)*8 (24)
Rnd 15: (sc,dec)*8 (16)

1. Chain 16.

2. Attach the 16th chain to the first with a slipknot. This will make a circle. Try not to twist the circle.

3. The donut will look like this at the end of rnd 15.

4. You now want to connect the two small circles. Using a darning needle, place 16 stitches around from one side to the other.

5. As you are sewing the 16 stitches together, stuff the donut every 4-5 stitches.

Belt (Make 2)
Colour B
Rnd 1: Slip knot, chain 4 (3)
Rnd 2: skip the first chain, sc 3, ch 1 and flip (3)
Rnd 3-18: sc 3, chain 1 and flip (3)

1. Using fabric pins, attach the two belt pieces to either side of the donut. They should be on rnd 4 of the donut. The free space in the middle is where the belt buckle will be.

2. Using a darning needle, sew the belt on.

Belt Buckle
Colour C
Make a slip knot, insert it one stitch below the black belt on the right side. Chain 4, insert it one stitch from the black band on the top. Continue this all the way around chaining 4 each time.

Buttons (Make 2)
Colour D

With fur yarn, mr sc 4. Slst to the first sc and tie off.
1. Using colour c yarn, make a slip knot and insert it one stitch below the black belt on the right side.

2. Chain 4. Insert the hook one stitch above the black belt. Continue all the way around, chaining 4 each time.

3. Belt buckle completed.

4. Make the buttons. Attach them to the top above the belt buckle. Sew on using a darning needle.

5. Take a 20′ stand of ribbon and attach it to top of the donut to hold it on the tree.

More Amigurumi Ornament Ideas:

Materials And Tools
• Sport weight/4ply yarn Yarn Art Jeans (50g/160m) Of red, yellow, light yellow, brown, white colors.
• Black fine thread
• Crochet hook – 1.75 mm or any type you prefer safety eyes 10 mm size
• Fiberfill
• Beads and rope
• Scissors
• Needle for embroidery and sewing pieces
• Pins for attaching details
• Markers

Abbreviations
MR– magic ring
SC– single crochet
Inc– increase
Dec– decrease
*6– number of repeats
(12)– total number of stitches in a round

Amigurumi Christmas Watch Ornament Free Pattern

Watch
Start crocheting with brown thread.
Rnd 1: 6 sc in MR
Rnd 2: 6 sc
Change color to light yellow.
Rnd 3: 6 inc (12)
Rnd 4: (1sc,inc)*6 (18)
Rnd 5: 1sc,inc, (2sc,inc)*5, 1sc (24)
Rnd 6: (3sc,inc)*6 (30)
Rnd 7: 2sc,inc, (4sc,inc)*5, 2sc (36)
Rnd 8: (5sc,inc)*6 (42)
Rnd 9: 3sc,inc, (6sc,inc)*5, 3sc (48)
Rnd 10: (7sc,inc)*6 (54)
Place safety eyes between rounds 6th and 7th.
Change color to white.
Rnd 11: 4sc,inc, (8sc,inc)*5, 4sc (60)
Change color to red.
Rnd 12-18: 60 sc (7 rounds)
Rnd 19: 4sc,dec, (8sc,dec)*5, 4sc (54)
Rnd 20: (7sc,dec)*6 (48)
Rnd 21: 3sc,dec, (6sc,dec)*5, 3sc (42)
Rnd 22: (5sc,dec)*6 (36)
Rnd 23: 2sc,dec, (4sc,dec)*5, 2sc (30)
Rnd 24: (3sc,dec)*6 (24)
Rnd 25: 1sc,dec, (2sc,dec)*5, 1sc (18)
Rnd 26: (1sc,dec)*6 (12)
Rnd 27: 6 dec (6)

Fasten off, sew the hole and hide the yarn tail inside the toy. Embroider the smile and eyebrows with a black fine thread.
Embroider the hands of the clock and dial with a brown thread.

Arms And Legs (Make 4)
Start crocheting with red thread.
Rnd 1: 6 sc in MR
Rnd 2: 6 inc (12)
Rnd 3-4: 12 sc (2 rounds)
Fasten off, leaving a long thread for sewing.

Bells (Make 2)
Start crocheting with yellow thread.
Rnd 1: 6 sc in MR
Rnd 2: 6 inc (12)
Rnd 3: (1sc,inc)*6 (18)
Rnd 4: (2sc,inc)*6 (24)
Rnd 5-7: 24 sc (3 rounds)
Fasten off, leaving a long thread for sewing.

Assembly
Fill in the bells with fiberfill. Sew to the watch. Sew the beads to the bells.

Don’t forget to follow lovelycraft.com for 2 new free amigurumi patterns every day.
Fill in the arms and the legs with fiberfill. Sew to the watch. Fasten the rope to the top of the watch.

Your watch is ready.

More Amigurumi Ornament Ideas: