MATERIALS AND TOOLS
1.  Plush yarn orange color (I used Himalaya Dolphin Baby 80330), little bit of brown yarn for the bottom of the pumpkin, two different green colored yarns for the leaves. Little bit of black and white cotton yarn for the face sculpting and to embroider the eyes, eyebrows and nose. You can use hook size and safety eyes that match to your yarn.
2. Hook size 3.5 mm
3. Scissors
4. Safety eyes size 18 mm
5. Needle
6. Fiber filling (stuffing)
7. Stitch marker

ABBREVIATIONS
MR-Magic ring
st/sts-stitch/stitches
ch-chain
sc-single crochet
Rnd/Rnds-round/rounds
inc-single crochet increase (2 sc in 1 st)
dec-invisible decrease (dec 2 sts together FLO)
BLO-back loop only
FLO-front loop only
dc-double crochet
(…)* -repeat instruction in bracket…times
(…)-total number of sts in the round/row
Sl st-slip stitch

IMPORTANT NOTES
✓ Toy size using these materials is around 10-11 cm (4 inches)
But keep in mind that you may get a toy size a little more or a little less.
It all depends on the yarn you use, hook size and your crochet tension.
✓ Use a stitch marker to mark the last stitch of every round.
✓ While stuffing do not forget to shape the body parts and never overstuff them.

Amigurumi Crochet Spooky Pumpkin For Halloween Free Pattern:

PUMPKIN
Start crocheting with green color. Stuff slightly as you go.
Rnd 1. 6 sc in MR
Rnd 2. 6 inc (12)
Rnd 3. 12 sc on BLO
Rnds 4-6. 12 sc (3 Rnds)
Change the color to orange.
Rnd 7. Work on FLO (1 sc, inc )* 6 (18)
Rnd 8. (2 sc, inc)* 6 (24)
Rnd 9. (3 sc, inc )* 6 (30)
Rnd 10. (4 sc, inc)* 6 (36)
Rnd 11. (5 sc, inc )* 6 (42)
Rnd 12. (6 sc, inc)* 6 (48)
Rnd 13-18. 48 sc (6 Rnds)
Insert the safety eyes between rnds 15 and 16, distance between 6 visible stitches.
Rnd 19. (6 sc, dec )* 6 (42)
Rnd 20. (5 sc, dec )* 6 (36)
Rnd 21. (4 sc, dec )* 6 (30)
Rnd 22. (3 sc, dec )* 6 (24)
Rnd 23. (2 sc, dec )* 6 (18)
Rnd 24. (1 sc, dec )* 6 (12)
Rnd 25. 6 dec (6)
Sew the hole closed.
Fasten off and weave in the ends.

LEAF (make one)
Working around the chain.
Rnd 1. Chain 10, starting in the second stitch: 6 sc, 2 inc, 3 sc in one stitch, 2 inc, 6 sc (23)
Rnd 2. 23 dc
Fold the leaf and make sl st to connect.
Fasten off and leaf a tail for sewing. Sew the leaf near the spiral leaves.

SPIRAL LEAVES (make two)
Attach the yarn with a sl st in Rnd 7 and Chain 26. In the second chain from the hook inc in each chain, sl st into the initial st of the body.
Fasten off and weave in the ends.

Shape the pumpkin (use a strong thread and long needle ): draw the needle through the bottom center and bring it to Rnd 7. Pull tight. Repeat this as many times you like. I did three times.

BOTTOM
Crochet with brown color.
Attach the yarn into Rnd 25 and make Chain 5.
Fasten off and burn the end.

TIGHTENING AND FACE SCULPTING
Follow the steps from the picture (see picture). Tighten each end of the thread well and then tighten both ends at once.
Embroider nose, eyelids and eyebrows (see picture)
Congratulations! Your Pumpkin is done, I hope you enjoyed it!
Don’t forget to tag me as the author of the pattern, when you post your plushie!

More Amigurumi Pumpkin Ideas:

Abbreviations
r-round
ch – chain
Sc-single crochet
3dc cl – 3 double crochet cluster stitch**
slst – slip stitch
inc – increase
dec – decrease
*… – repeat… times (…) total number of stitches in the round

Materials
Bulky (solid)  yarn
8mm hook
2 buttons
Fiber filling Thread
Needle
*ATTENTION – before using safety eyes, please, read instruction. It might be dangerous for children.
** 3dc cl stitch you can find a tutorial video on my page, HIGHLIGHT – TUTORIALS

Amigurumi Crochet Purple Bug for Halloween Free Pattern:

Body – black yarn, (white)
Make 8 ch, start in the second chain from the hook
R1: 6sc, 3sc into the last stitch, work on along the other side: 5sc, 1inc (16)
R2: (1inc, 2sc, 1inc, 2sc, 1inc,1sc)*2 (22)
R3: 1inc, 9sc, 1inc, 1sc, 1inc, 7sc, 1inc, 1sc (26)
R4:26sc (26)
R5: (1inc, 5sc, 1inc, 6sc)*2 (30)
R6-R7: 30sc (30)
From now on we are making heart, white colour means white yarn!!!
R8: 8sc, 1inc, 12sc, 2sc, 1sc, 2sc, 4sc (31)
R9 R10: 21sc, 7sc, 3sc (31)
R11: 5sc, 1inc, 16sc, 5sc, 4sc (32)
R12: 1dec, 15sc, 1dec, 5sc, 3sc, 5sc (30)
R13: 4sc, 1dec, 12sc, 1dec, 3sc, 1sc, 6sc (28)
R14: (7sc, 1dec)*3, 1sc (25)
R15: 3sc, 1dec, 7sc, 1dec, 7sc, 1dec, 2sc (22)
R16: (1dec, 4sc)*3, 1dec, 2sc (18)
R17: 9dec (9)
R18: 1sc, 4dec (5)
Cut the yarn and close remaining stitches. Finish off. Use a piece of white yarn to form the heart shape.

Mandibles (2pieces)
Use black colour
R1: 5sc in magic ring (5)
R2: 2sc, 1inc, 2sc (6)
R3: 1dec, 1sc, 2inc, 1sc (7)
R4: 1dec, 1sc, 1inc, 3dc cl, 1inc, 1sc (8)
R5: 1dec, 1sc, 3inc, 1dec (9)
R6: 2dec, 1inc, 1sc, 1inc, 1dec (8)
R7: 1dec, 2sc, 1inc, 1inc, 1dec (8)
Make slst, fasten off, cut the yarn, leave a tail for sewing on R1-R2, 3stitches apart (two angles of the head).

Legs (6pieces)
Use black colour
R1: 6sc in magic ring (6)
R2 R5: 6sc (6)
Fold two sides and make 3s, fasten off, cut the yarn, leave a tail for sewing on the sides.

Face
Eyes on R3-R4, approxx. 2-3 stitches apart.
And you are done!

More Amigurumi Halloween Bug Ideas:

Materials list
White yarn
Black yarn
Purple yarn
8 mm safety eyes
2 mm crochet hook
Stuffing
Tapestry needle

Abbreviations:
sc: single crochet
FLO: front loop
BLO: back loop
sl st: slip stitch

Amigurumi Fantasmin Crochet Halloween Ghost Free Pattern:

Body of the Little Ghost
(White)
R1: 6 sc in a magic ring. (6)
R2: (Inc) x 6. (12)
R3: (1 sc, Inc) x 6. (18)
R4: (2 sc, Inc) x 6. (24)
R5: (3 sc, Inc) x 6. (30)
R6-R14: 30 sc. (30)
R15: 30 sc FLO. (30)
R16: (9 sc, Inc) x 3. (33)
R17-R19: 33 sc. (33)

Fasten off and weave in ends.
Place the eyes on round #9 with a 6-stitch separation.

Closing instructions:
Stuffing the body: Before continuing with the next rounds, stuff the little ghost’s body with your preferred stuffing material.
R1: Join in the back loop of round 15 (the one inside the body) and crochet 30 sc. (30) BLO
R2: (3 sc, dec) x 6. (24)
R3: (2 sc, dec) x 6. (18)
Finish: Fasten off, leaving a long tail to close the body. Use a tapestry needle to close the remaining stitches and secure the finish.

Arms
(White)
R1: 6 sc in a magic ring. (6)
R2-R5: 6 sc. (6)
Fasten off, Leave a yarn tail to sew between rounds 11 and 13.

Hat
(Black and Purple)
R1: 6 sc in a magic ring. (6)
R2: 6 sc. (6)
R3: (1 sc, Inc) x 3. (9)
R4: 9 sc. (9)
R5: (2 sc, Inc) x 3. (12)
R6: 12 sc. (12)
R7: (3 sc, Inc) x 3. (15)
R8: 15 sc. (15)
R9: (4 sc, Inc) x 3. (18)
R10: 18 sc. (18)
R11: (5 sc, Inc) x 3. (21)
Switch to purple:
R12: 21 sc. (21)
R13: FLO (Inc) x 21. (42)
Finish: Fasten off, leaving a long tail for sewing.
Sew all the pieces together.

Additional details:
Hanging loop: Before attaching the hat, you can add a loop at the tip to hang it. This is optional and will add a decorative touch.

Decoration: Embroider the mouth, cheeks, or decorate it however you like.
Add your personal touch!

More Amigurumi Halloween Ghost Ideas:

Material List:
Alize Cotton gold in the colors orange, Black and white.
1.8 or 2 mm crochet hook Tapestry needle
Embroidery floss for the “X” scarred eye
8 mm black safety eye, you only need one.
Stuffing
Scissors

Abbreviations:
MR – Magic ring
st – stitch
inc – increase
dec – decrease
ch – chain
sc – single crochet
sl st– slip stitch
BLO – back loops only
HDC – half double crochet
DC – double crochet
TR – treble crochet

Amigurumi Crochet the Jester for Halloween Doll Free Pattern:

Head
01. 6 sc in MR (6)
02. 6 inc (12)
03. (1sc, inc)x6 (18)
04. (2sc, inc)x6 (24)
05. (3sc, inc)x6 (30)
06. (4sc, inc)x6 (36)
07. (5sc, inc)x6 (42)
08. (6sc, inc)x6 (48)
09-17. sc all around (48) (8 rounds)
Insert safety eyes between rounds 14 and 15.
18. (6sc, dec)x6 (42)
19. (5sc, dec)x6 (36)
20. (4sc, dec)x6 (30)
21. (3sc, dec)x6 (24)
22. (2sc, dec)x6 (18)
Stuff.

Horns (make 2)
01. 6 sc in MR (6)
02. (1sc, inc)x3 (9)
03. (2sc, inc)x3 (12)
04. (3sc, inc)x3 (15)
05. (4sc, inc)x3 (18)
06. (5sc, inc)x3 (21)
07. Join with the 12th sc and continue working 12 sc (12)
08. sc all around (12)
09. (2sc, dec)x3 (9)
10. sc all around (9)
11. (1sc, dec)x3 (6)
12. sc all around (6)
13. 3 dec (3)
Now it’s time to crochet in the stitches we left unworked in round 6.
01. (2sc, inc)x3 (12)
02. sc all around (12)
03. (3sc, inc)x3 (15)
04. sc all around (15)
05. (4sc, inc)x3 (18)
06. In BLO sc all around (18)
07. (2sc, inc)x6 (24)
08. In BLO sc all around (24)
09. (3sc, inc)x6 (30)
10. In BLO sc all around (30)
11. sc all around (30)

Horns
Go back to the front loops we left unworked in rounds 6, 8, and 10 of the part 2 of the hrons. Work slip stitches in each of the rounds. Hold your horn right side up as you do so.

Hat
01. 6 sc in MR (6)
02. 6 inc (12)
03. (1sc, inc)x6 (18)
04. (2sc, inc)x6 (24)
05. (3sc, inc)x6 (30)
06. (4sc, inc)x6 (36)
07. (5sc, inc)x6 (42)
08. (6sc, inc)x6 (48)
09-13. sc all around (48) (5 rounds)
14. 20sc, 2HDC, 3DC, 2HDC, 21 SC (48)
15. 19sc, 3HDC, DC, TR, DC, 3 HDC, 20 sc (48)

Ruffles
Start with a chain 19. Start in the 2nd crochet from hook.
01. 18 inc, ch1, turn (36)
02. (1sc, inc)x18, ch1, turn (54)
03. (2sc, inc)x18, ch1, turn (72)
04. (3sc, inc)x18, ch1, turn (90)

Assembly
Assemble arms to body in round 11.
Assemble both horns to the hat symetrycally, and the hat to the head.
Assemble the head to the body. Sew the neck ruffles around the neck.
Embroider an “X” on the face in the place of the eye.
Embrioder a little tear and a frown (optional).
Conratulations! you have made yourself a sweet little creature.

More Amigurumi Jester Doll Ideas:

ABBREVIATIONS
MR magic ring
R – row/round
ch – chain
sc – single crochet
st(s) stitch(es)
inc – increase
dec – decrease
FLO-front loops only
sl st – slip stitch
(…) x n― repeat (…) n times Number in () at the end of the Row indicates number of st in that row

Materials & Tools
–  YARN Himalaya Dolphin Baby (100% Polyester, 100g/120mt) in colors: #80368 – yellow #80371-green
Crochet hook 4 mm
Safety eyes 10 mm
Safety eyes 7 mm
Fiberfill
Scissors
Big needle
Stitch marker
Sweet things

Amigurumi No Sew Spider Pumpkin for Halloween Free Pattern:

Crochet with yellow color yarn.
R1: 8 sc in MR
R2: inc x 8 (16)
In the next row, we will crochet spider legs*
R3: 2 sc, leg x 4, 4 sc, leg x 4, 2 sc (16)
R4-6: 16 sc (3 rows)
Insert safety eyes as shown on the picture.
R7: dec x 8 (8)
Fill the pumpkin with fiberfill.

*Leg:
sl st FLO, make a chain of 4 and into the 2nd st from the hook: 3 sl st, than sl st FLO into the same loop of R2.

Cut the yarn, leaving a long yarn tail.
Close the small hole that remains (take the FLO). Draw needle through the top center and bring it to the bottom center. Draw yarn tail around the pumpkin between big eyes and insert the needle into the top again and out through the bottom. Repeat symmetrically on the back of pumpkin. Than repeat the same on the sides of pumpkin.
You created 4 lines.

Stem:
Insert hook into the top and pull a loop of green color yarn.
Make a chain of 3 and into the 2nd st from the hook crochet: 2 sl st.
Cut the yarn. Hide yarn tails inside.

More Amigurumi Spider Ideas:

You will need:
– YarnArt Jeans  yarn (55% cotton, 45% acrylic, 50 g/160 m)
– 1.5 mm  crochet hook
– 6 mm and 10 mm safety eyes
– Black and pink threads
– Sewing needle
– Scissors
– Fiberfill
Height: 7 cm (2.7″)

Abbreviations:
MR – magic ring
sc – single crochet
dc – double crochet
tr – treble crochet
inc – increase (2 sc in one stitch)
dec – decrease (2 sc together)
(…) – number of stitches you should have at the end of the row
(…)*6 – repeat whatever is between the brackets the given number of times

Amigurumi Crochet Ghost Free Pattern:

More Amigurumi Halloween Ghost Ideas:

Materials:
• Any yarn of your choice and hook
• Safety eyes or buttons
• Thin thread in the tone of yarn for sewing details together
• Sewing needle, stitch markers and scissors
• Fiberfill or any stuffing of your choice
• (Optional)
• Ribbon for the bows

Abbreviations:
• Mr: Magic ring
• Sc: Single Crochet
• Inc: Increase
• Dec: Decreaset
• St: Stitch
• Sl-St: Slip Stitch
• Ch: Chain
• Yo: Yarn over

Amigurumi Purple Zombie Bunny Free Pattern:

Head
R1. Mr [6] R2. Inc x6 [12]
R3. (1sc inc) x6 [18]
R4. (2sc inc) x6 [24]
R5. (3sc inc) [30]
R6. (4sc inc) [36]
R7-R12. Sc round [36]
Add the eyes between round 9 and 10, 6 stitches apart
R13. (4sc dec) x6 [30]
R14. (3sc dec) x6 [24]
R15. (2sc dec) x6 [18]
Stuff the head
R16. (1sc dec) x6 [12]
R17. Dec around
Fasten off leave a long tail for sewing

Body
R1. Mr [6]
R2. Inc x6 [12]
R3. (1sc inc) x6 [18]
R4. (2sc inc) x6 [24]
R5. (3sc inc) [30]
R6. (4sc inc) [36]
R7-R12. Sc round [36]
R13. (4sc dec) x6 [30]
R14. (3sc dec) x6 [24]
R15. (2sc dec) x6 [18]
Stuff the body
R16. (1sc dec) x6 [12]
R17. Dec around
Fasten off leave a long tail for sewing

Ears x2
R1. Mr 7
R2. Inc x7 [14]
R3. (1sc inc) x7 [21]
R4-10. Sc round [21]
R11. (2sc dec) x5 1 sc [16]
R12-18. Sc round [16]
Do not stuff!
Fasten off leave long tail for sewing

Arms x2
R1. Mr 4
R2. Inc x4 8
R3-6. Sc round [8]
Stuff lightly
Fasten off leave long tail for sewing

Feet x2
R1. Mr 4
R2. Inc x5 [10]
R3-6. Sc round [10]
Stuff lightly
Fasten off leave long tail for sewing

Assembly!
Sew the head onto the body.
Place the ears opposite of each other. Sew the ears three stitches away from the middle of the head.
Sew the arms opposite of each other where the head and body connects seven stitches apart.
Sew the feet opposite of each other five stitches apart and four stitches below the arms.
Sew the tail seven stitches away from the feet in the middle of it.

Details!
Sew a cross on the left side as shown in the picture. Sew a line down from above the eyes to the middle of the top of the head. Make 3 crosses, top, middle and bottom as shown on the picture.

Sew a triangle in between the eyes in the middle as the nose as shown in the picture.
Sew a straight diagonal line just underneath the eyes in the middle. Make 3 stripes, top, middle and bottom as shown on the picture.

(Optional)
Use ribbon to tie a bow around each ear or around the neck. Double knot it. Use the thread yarn to secure it in place.

More Amigurumi Halloween Zombie Bunny Ideas:

MATERIALS
• Chennile yarn, green, orange and brown
• Crochet hook (I used 5mm)
• Yarn needle
• scissors
• Stuffing
• Plastic safety eyes

ABBREVIATIONS
• Rx- round x
• Sc= single crochet
• dec= decrease
• inc= increase
• BO= bobble stitch
• Mr- Magic ring
• Sist= slip stitch
• ch= chain
• BLO= back loop only
• FLO= front loop only
• dc= double crochet
• Fo= fasten off
• Color A= Orange
• Color B= Brown
• Color C Green

Amigurumi Halloween Bunny Pumpkin Free Pattern:

Head and Body
*start with Color A
• R1: 4sc in MR (4)
• R2: 4inc (8)
• R3: BLO (sc, inc)x4 (12)
• R4: (2sc, inc) x4 (16)
• R5: Do the BO in Color B: 4sc, BO, 4sc, BO, 6sc (16)
• R6: (3sc, inc) x4 (20)
• R7: sc around (20)
• R8: Do the BO in Color B: 4sc, BO, 10 sc, BO, 4sc (20)
* Stretch your work to the sides make it rounder
• R9: (2sc, dec) X5 (15)
• R1O: (sc, dec) x5 (10)
*Stretch, stuff change to Color B.
• R11: BLO (sc, inc) x5 (15)
• R12: (2sc, inc) x5 (20)

• R13: sc around (2 rounds) (20)
• change to Color A: sc around (20) *safety eyes between R13-R14 4sc apart, stretch
• BLO (2sc, dec) x5 (15)
• Stretch your work, stuff
• (sc, dec) x5 (10)
• 5dec (5)
• FO, sew shut. *squish to make it chubbier *embroider the nose between eyes.

HAT – sides;
*use Color A
*insert your hook in the front loops of R16
• R1: (sc, ch, 2dc in 1 sc, ch) do this all around R16.

EARS 2x
• R1: 6sc in MR (6)
• R2: (2inc, sc) x2 (10)
• R3: sc, 2inc, 3sc, 2inc, 2sc (14)
• R4: sc, 2dec, 3sc, 2dec, 2sc (10)
• R5: sc around (10)
• R6: (dec, 3sc) x2 (8)
*4sc to close, chain 1, turn, 4sc, Fo leave a long tail and sew under the hat however you think looks best.

Pumpkin stem
*Insert the hook on the top of the head.
Chain 3, start in the second chain from hook 2 hdc, slst in hat.
*You can make a cute/spooky face out of felt and glue it on the pumpkin or embroider it.

And you’re done!
More Amigurumi Halloween Toys Ideas:

Material List
plush yarn in two colors
hook
stuffing
needle

Abbrevitation
ch = chain stitch
ss = slip stitch
sc = single crochet
hdc = half double crochet
BLO = in back loop only
dec = decrease
rnd = round

Amigurumi Cute Halloween Pumpkin for Beginners Free Pattern:

Pumpkin Pattern
Rnd1 17ch
Rnd2 2ss, 2sc, 8hdc, 2sc, 2ss, 1ch, turn (16)
Rnd3-23 BLO 2ss, 2sc, 8hdc, 2sc, 2ss, 1ch, turn (16)
finish, cut the yarn, leave the the yarn for sewing edges together and closing holes.

sew the edges neatly together and close the lower hole.

Close the top hole only slightly, not completely
Work 10sc behind the top edge with complementary colour and continue:
Rnd1 5dec (5)
Rnd2 3sc, dec (4)
Rnd3 4sc (4)
Rnd4 2sc, dec (3)
Rnd5 3sc (3)
finish, cut, close the hole, hide the thread inside.

More Amigurumi Pumpkin Ideas:

Materials:
• 2mm crochet hook
• Amigurumi yarn for the pumpkin (in the color of your choice)
• Skin-colored amigurumi yarn for the head
• Amigurumi yarn for the hat (also in the color of your choice)
• Silicone fiber
• Scissors
• Tapestry needle for finishing
• 7mm eyes

Abbreviations:
• Am: magic ring
• Sc: Single crochet
• Inc: Increase
• Dec: Decrease

Amigurumi Pumpkin Doll Jack Free Pattern:

Abobora
1- 6sc in MR
2-6 inc (12)
3- (1sc, inc) x6 (18)
4- (2sc, inc) x6 (24)
5- (3sc, inc) x6 (30)
6- (4sc, inc) x6 (36)
7- (5sc, inc) x6 (42)
8- (6sc, inc) x6 (48)
9 – 18- 48sc (10 rounds)
19- (6sc, dec) x6 (42)
20- (5sc, dec) x6 (36)
21- (4sc, dec) x6 (30)
22-(3sc, dec) x6 (24)
23-(2sc, dec) x6 (18)
22- (1 sc,dec) x6 (12)
21-6dec (6)
Add stuffing as the piece gains height
Close with an inverted magic ring, and leave a long thread to make the markings that form the pumpkin. See the photos

If you prefer, leave the thread unfinished so that you can use it to sew the head

Head
1-6sc in MR
2-6 inc (12)
3- (1 sc, inc) x6 (18)
4- (2sc, inc) x6 (24)
5-9- 24sc (5 rounds)
10- (2sc, dec) x6 (18)
11- (1sc, dec) x6 (12)
12- 6dec (6)
Close with inverted magic ring and fasten off
Place eyes between rows 6 and 7, 4 stitches apart

Hat
1- 6sc in MR
2-5-6sc (4 rounds)
6- inc, 5sc (7)
7- inc, 6sc (8)
8- inc, 7sc (9)
9- 8sc, inc (10)
10- 9sc, inc (11)
11- 10sc, inc (12)
12- 12sc
13- (1sc, inc) x 6 (18)
14- (2sc, inc) x 6 (24)
15-17-24 (3 rounds)
Cut the yarn and fasten off.

Little leaf
1- Ch 6, go back and make 1 sc, hdc, dc, hdc, sc, make 2 ch. continue on the other side. 1 slst, sc, hdc, dc, hdc, sc. Cut the thread and fasten off. Leave a piece of thread to sew the little leaf to the hat

Collar
1- 20 Ch, go back and make 2 hdc in each ch from the third ch. (36)
2- 36 inc (72)

More Amigurumi Pumpkin Ideas: