Add some festive cheer to your holiday table with this Amigurumi Christmas Gnome pattern! Perfect for holding cutlery, these adorable gnomes will be a delightful addition to your celebrations.

Project Details

Skill Level: Beginner–Intermediate

Finished Size: Approximately 18 cm tall

Materials

• Red yarn (super bulky): ~60 g
• White yarn (super bulky): ~45 g
• Beige yarn for nose: ~5 g
• Yarn needle
• 7–8 mm crochet hook
• Small amount of stuffing for nose
• Scissors
• Stitch marker

Abbreviations

MR – magic ring, sc – single crochet, inc – increase, dec – decrease, sl st – slip stitch, ch – chain, FO – fasten off

Pattern

Body Pouch

With red yarn, ch 15 (14 sc across).

Row 1: sc across (14).

Rows 2-38: sc across (14).

FO.

Hat

With red yarn, ch 18 (17 sc).

Row 1: sc across (17).

Row 2-6: sc across (17).

Start shaping: Row 7: dec, sc 13, dec (15).

Continue decreasing and shaping as per instructions.

Beard

Cut strands of white yarn and attach them below the nose for a fluffy look.

Assembly

Sew the hat to the body, ensuring the pocket remains open for cutlery. Attach the nose and arrange the beard as desired.

Final Notes

Feel free to customize your gnome with different colors or accessories. Enjoy making your festive cutlery holders!

Copyright Notice

Pattern created for amigurumi.badoomobile.net

Finished Gnome Amigurumi – Color Variations and Accessories

Welcome to the Amigurumi Christmas Gnome Free Pattern! This delightful project will add a whimsical touch to your holiday décor. With a cozy hat and a fluffy beard, this gnome is the perfect festive companion.

Project Details

Skill Level: Intermediate

Finished Size: Approximately 9–10 inches (23–25 cm) tall.

Materials

• Worsted weight yarn in red, white, beige, green, and small amounts of yellow and red for decorations.
• 3.0–3.5 mm crochet hook
• Polyester fiberfill
• Tapestry needle
• Stitch marker
• Scissors

Abbreviations

• MR – magic ring
• sc – single crochet
• inc – increase
• dec – decrease
• sl st – slip stitch
• ch – chain
• FLO – front loop only
• BLO – back loop only
• FO – fasten off

Pattern

Body (Red)

R1: MR, 6 sc (6)

R2: inc ×6 (12)

R3: (sc, inc) ×6 (18)

R4: (2 sc, inc) ×6 (24)

R5: (3 sc, inc) ×6 (30)

R6: (4 sc, inc) ×6 (36)

R7: (5 sc, inc) ×6 (42)

R8–22: sc around (42)

Stuff firmly as you go.

R23: (5 sc, dec) ×6 (36)

R24: (4 sc, dec) ×6 (30)

R25: (3 sc, dec) ×6 (24)

R26: (2 sc, dec) ×6 (18)

R27: (sc, dec) ×6 (12)

R28: dec ×6 (6)

FO, close opening and weave in ends.

Nose (Beige)

R1: MR, 6 sc (6)

R2: inc ×6 (12)

R3: (sc, inc) ×6 (18)

R4–5: sc around (18)

R6: (sc, dec) ×6 (12)

FO, leave a long tail for sewing.

Arms with Folded Cuffs (Make 2)

Hands (Beige)

R1: MR, 6 sc (6)

R2: inc ×6 (12)

R3–5: sc around (12)

R6: (2 sc, dec) ×3 (9)

Folded Cuff (White)

R7: BLO sc around (9)

R8: sc around (9)

Fold R8 downward and secure with hidden stitches.

Sleeve (Red)

R9–14: sc around (9)

Lightly stuff only the hand section. FO, leave tail for sewing.

Hat (Red)

R1: MR, 4 sc (4)

R2: inc ×4 (8)

R3: (sc, inc) ×4 (12)

R4: (2 sc, inc) ×4 (16)

R5: (3 sc, inc) ×4 (20)

R6: (4 sc, inc) ×4 (24)

R7: (5 sc, inc) ×4 (28)

R8: (6 sc, inc) ×4 (32)

R9: (7 sc, inc) ×4 (36)

R10: (8 sc, inc) ×4 (40)

R11–30: sc around (40)

R31: FLO sc around (40)

R32–34: sc around (40)

Roll the brim upward and secure it inside.

Pom-Pom (White)

R1: MR, 6 sc (6)

R2: inc ×6 (12)

R3–4: sc around (12)

R5: dec ×6 (6)

FO and sew to the hat tip.

Beard (White)

Make 12–14 individual strands and sew under the hat brim.

Holly Leaves & Berries

Leaves (Green – Make 2–3)

Ch 8, sc, hdc, dc, tr, dc, hdc, sc along chain.

FO.

Berries (Red – Make 3)

R1: MR, 6 sc

R2: sc around

FO, stuff lightly.

Final Assembly

Attach beard under hat, secure nose over beard, pull hat low to touch the nose, sew arms under brim, add holly detail.

Final Notes

Your festive gnome is complete! Enjoy displaying or gifting this charming handmade decoration.

Copyright Notice

This pattern created for amigurumi.badoomobile.net. All rights reserved.

Finished Gnome Amigurumi – Color Variations and Accessories

Create your very own Winter Bathroom Gnome with this delightful crochet pattern! This whimsical gnome not only adds a touch of charm to your bathroom decor but also serves a practical purpose by holding toilet paper.

Project Details

Skill Level: Intermediate

Finished Size: Approximately 40–45 cm (16–18 in) tall with the hat extended.

Materials

• Sky blue plush/chenille yarn (180–220 g)
• Beige DK yarn (60 g)
• White DK yarn (25–35 g)
• White faux-fur yarn (10–15 g)
• 5 mm crochet hook (for plush)
• 2.5–3 mm hook (for DK)
• Polyester stuffing
• Tapestry needle
• Scissors
• Optional: 1.5–2 mm aluminum craft wire

Abbreviations

MR – Magic Ring
sc – Single crochet
inc – Increase
dec – Decrease
sl st – Slip stitch
ch – Chain
BLO – Back loop only
FO – Fasten off

Tall Winter Hat

MR, 4 sc
2–4. sc around (4)
(1 sc, inc) × 2 → 6
Continue in this fashion to shape the hat and finish with a pom-pom on top.

Body

Start with MR, increase to create a round shape for the gnome’s body. Stuff firmly for structure.

Nose

Use beige yarn to create the gnome’s nose, ensuring it is lightly stuffed.

Beard

Attach faux-fur strands to create a fluffy beard that drapes nicely.

Arms and Legs

Make two arms with mitten-shaped hands and two short legs ending in boots.

Assembly

Carefully sew all parts together, ensuring the gnome’s limbs are positioned to securely hold the toilet paper roll.

Final Notes

Your Winter Bathroom Gnome is now complete! Enjoy the charm and functionality it brings to your home.

Pattern created for amigurumi.badoomobile.net

Copyright Notice: This pattern is for personal use only. Do not distribute or sell without permission.

Finished Gnome Amigurumi – Color Variations and Accessories

You will need:
– YаrnΑrt Јeans  yarn: main color (red/blue), nude and white
– Αlіzе Sоfty yarn (for a beard): white
– 2.0 mm  crochet hook
– Stitch marker
– Sewing needles and pins
– Scissors
– Thread cord key holder
– Fiberfill

Abbreviations:
R – row
ch – chain
sc – single crochet
hdc – half double crochet
inc – increase (2 sc in one stitch)
dec – decrease (2 sc together)
[…] – number of stitches you should have at the end of the row
(…) – repeat whatever is between the brackets the given number of times

Amigurumi Christmas Gnome Free Pattern:

Arms (make 2)
With nude yarn:
R 1: 6 sc in magic ring [6]
R 2: 6 sc
Change to main yarn:
R 3-8: 6 sc (6 rows)
Fold the top opening flat and 3 sc through both sides.
Fasten off and leave a long tail for sewing.

Nose
With nude yarn:
R 1: 7 sc in magic ring [7]
R 2: 7 sc
Fasten off and leave a long tail for sewing.

Beard
With Alize Softy yarn:
R 1: 6 sc in magic ring [6]
R 2: 6 sc
R 3: (2 sc, inc) repeat 2 times [8]
R 4: (3 sc, inc) repeat 2 times [10]
R 5: (4 sc, inc) repeat 2 times [12]
R 6: 12 sc
Don’t stuff with fiberfill.
Fold the top opening flat and 6 sc through both sides.
Fasten off and leave a long tail for sewing.

Hat
With white yarn:
R 1: 6 sc in magic ring [6]
R 2: (inc) repeat 6 times [12]
R 3-4: 12 sc (2 rows)
R 5: (dec) repeat 6 times [6]
Change to main yarn:
R 6-7: 6 sc (2 rows)
R 8: (2 sc, inc) repeat 2 times [8]
R 9-10: 8 sc (2 rows)
R 11: (3 sc, inc) repeat 2 times [10]
R 12-13: 10 sc (2 rows)
R 14: (4 sc, inc) repeat 2 times [12]
R 15-16: 12 sc (2 rows)
R 17: (5 sc, inc) repeat 2 times [14]
R 18-19: 14 sc (2 rows)
R 20: (6 sc, inc) repeat 2 times [16]
R 21-22: 16 sc (2 rows)
R 23: (7 sc, inc) repeat 2 times [18]
R 24: (2 sc, inc)repeat 6 times [24]
R 25: (3 sc, inc) repeat 6 times [30]
R 26: 30 sc
Change to white yarn:
R 27: 30 hdc
Fasten off and leave a long tail for sewing.

Body and Head (one piece)
With main yarn:
R 1: 6 sc in magic ring [6]
R 2: (inc) repeat 6 times [12]
R 3: (1 sc, inc) repeat 6 times [18]
R 4: (2 sc, inc) repeat 6 times [24]
R 5: (3 sc, inc) repeat 6 times [30]
R 6-11: 30 sc (6 rows)
R 12: (3 sc, dec) repeat 6 times [24]
R 13: Attach the arms on the sides of the body (crochet sc of the body together with sc of the arm): 5 sc, 3 sc together with sc of the 1st arm, 8 sc, 3 sc together with sc of the 2nd arm, 5 sc [24]
R 14: Attach the beard: 9 sc, 6 sc together with sc of the beard, 9 sc [24]
R 15: (2 sc, dec) repeat 6 times [18]
R 16-17: 18 sc (2 rows)
Stuff with fiberfill.
R 18: (1 sc, dec) repeat 6 times [12]
R 19: 12 sc
R 20: (dec) repeat 6 times [6]
Fasten off.

More Amigurumi Gnome Ideas:

Size
When using the recommended hook size, yarn, the yarn under method (x stitch), the gnome measures 4 inches/10.16 centimeters.

Materials
Materials needed to create the toy in order to replicate my toy:
– Crochet hook size: 5 mm hook
– Yarn used: Bulky Weight Chenille Yarn (Weight 5)- (Light Blue, Pink, Ivory, Mint)
– Scraps of thin black yarn
– Stuffing
– Darning needle
– Stitch marker (optional)

Body/Hat
Use Light Blue. Stuff as you go.
Round 1: 6 sc in MR. [6]
Round 2: (inc) x 6. [12]
Round 3: (sc, inc) x 6. [18]
Round 4: BLO, 18 sc. [18]
Round 5: sc, inc, (2 sc, inc) x 5, sc. [24]
Rounds 6-9: 24 sc. [24] (4 rounds)
Round 10: (6 sc, dec) x 3. [21]
Change to Mint
Round 11: 21 sc. [21]
Round 12: BLO, 21 sc. [21]
Round 13: 21 sc. [21]
Round 14: (5 sc, dec) x 3. [18]
Change to Pink
Rounds 15-16: 18 sc. [18] (2 rounds)
Round 17: (4 sc, dec) x 3. [15]
Change to Mint
Round 18: 15 sc. [15]
Round 19: 9 sc, (dec) x 3. [12]
Round 20: 6 sc, (dec) x 3. [9]
Change to Pink
Round 21: 9 sc. [9]
Round 22: 4 sc, (dec) x 2, sc. [7]
Round 23: (dec) x 3, sc. [4]
Cut yarn and weave end through remaining front loops.

Hat Brim
Use Mint. Turn your gnome upside down so the hat is facing you. The chain 2 does not count as a stitch.
Round 1: Join yarn in the FLO from round 11 (picture 2), ch 2. 21 hdc, join and ch 2. [21]
Round 2: (6 hdc, hdc inc) x 3, join and ch 1. [24]
Round 3: (sc, sk next stitch, 5dc in next stitch, sk next stitch) x 5, sc, sk next stitch, 5dc in next stitch, sl st to
first st. [42]
Cut yarn and weave in end.

Nose
Use Ivory. Stuff lightly.
Round 1: 6 sc in MR. [6]
Round 2: (inc) x 6. [12]
Round 3: 12 sc. [12]
Cut yarn and leave a tail for sewing.

Arms
Use Ivory and Light Blue, make 2. Stuff arm lightly (I used the extra yarn tails)
Start with Ivory
Round 1: 6 sc in MR. [6]
Round 2: 6 sc. [6]
Change to Light Blue
Rounds 3-5: 6 sc. [6] (3 rounds)
Round 6: Flatten and 3 sc across. [3]
Cut yarn and leave a long tail for sewing.

Beard
Use Ivory. Leave a long starting tail. Do not ch 1 at the end of each row.
Row 1: Ch 7, starting in the 2nd ch from the hook, 6 sc, turn. [6]
Row 2: skip first stitch, 5 sc, turn. [5]
Row 3: skip first stitch, 4 sc, turn. [4]
Row 4: skip first stitch, 3 sc, turn. [3]
Row 5: skip first stitch, 2 sc, turn. [2]
Row 6: skip first stitch, 1 sc, turn. [1]
Row 7: sc around the edge of the beard with an inc in the top 2 corners.
Cut yarn and weave in end.

Assembly
– Sew beard right under the brim of the hat.
– Sew the nose centered at the top of the beard.
– Sew the arms two rounds down from the brim of the hat.

More Amigurumi Gnome Ideas:

Materials
• Fingering weight yarn in green, red, white, a colour for the skin, gold and orange. For orange (hair) you can also use acrylic or wool.
• Any hook size to match your yarn
• Stitch marker to mark the beginning of the rounds
• Stuffing material
• Scissors
• Tapestry needle

Abbreviations
• Mr– magic ring
• St(s)– stitch(es)
• Ch– chain
• Sl st– slip stitch
• Blsc– back loop single crochet
• Sc– single crochet
• Hdc– half double crochet
• Dc– double crochet
• Inc– increase
• Dec– decrease
• FO– fasten off

Notes
• The pattern is worked in a continuous spiral unless otherwise noted.
• You need to know how to make the crab stitch (reverse single crochet).

Amigurumi Miss Gnome Free Pattern

Body
(with red yarn)
Rnd 1: 6sc in mr (6)
Rnd 2: (inc)*6 (12)
Rnd 3: (sc,inc)*6 (18)
Rnd 4: (2sc,inc)*6 (24)
Rnd 5: (3sc,inc)*6 (30)
Rnd 6: (4sc,inc)*6 (36)
Rnd 7: (5sc,inc)*6 (42)
Rnd 8-13: 42sc (42)
Rnd 14: 42 blsc (42)
Rnd 15-19: 42sc (42)
Rnd 20: (5sc,dec)*6 (36)
Rnd 21: 36sc (36)
Rnd 22: (4sc,dec)*6 (30)
Rnd 23: 30sc (30)
Rnd 24: (3sc,dec)*6 (24)
Rnd 25: 24sc (24)
Start stuffing
Rnd 26: (2sc,dec)*6 (18)
Rnd 27: 18sc (18)
Rnd 28: (1sc,dec)*6 (12)
Rnd 29: 12sc (12)
Complete stuffing
Rnd 30: (dec)*6 (6)
FO leaving a long tail for sewing. Sew through the front loops only and pull tight to close the hole. Weave in the ends of the yarn.
Continue with the dress by attaching red yarn in any st of the front loops of round 13 of the body. Hold the doll upside down.
Round 1 of dress: 3 chains (count as a st) and 1 dc in one st, 2 dc in each st around (84sts); sl st in 3rd ch to join the round.
Round 2-4 of dress: 3 chains (count as a st), 83 dc (84sts); sl st in 3rd ch to join the round.
Change to golden yarn
Round 5 of dress: crab stitch x84 (84sts).
Make a sl st and FO. Weave in the ends.

Feet (Make 2)
(with green yarn)
Rnd 1: 6sc in mr (6)
Rnd 2: (sc,inc)*3 (9)
Rnd 3-6: 9sc (9); stuff lightly only the bottom part of the foot.
FO leaving a long tail for sewing. Press the hole flat and sew both parts together. Don’t cut the rest of the yarn.

Hat
(with green yarn)
Rnd 1: 6sc in mr (6)
Rnd 2-7: 6sc (6)
Rnd 8: (2sc,inc)*2 (8)
Rnd 9-12: 8sc (8)
Rnd 13: (3sc,inc)*2 (10)
Rnd 14-17: 10sc (10)
Rnd 18: (4sc,inc)*2 (12)
Rnd 19-20: 12sc (12)
Rnd 21: (3sc,inc)*3 (15)
Rnd 22: 15sc (15)
Rnd 23: (4sc,inc)*3 (18)
Rnd 24: 18sc (18)
Rnd 25: (5sc,inc)*3 (21)
Rnd 26: 21sc (21)
Rnd 27: (6sc,inc)*3 (24)
Rnd 28: 24sc (24)
Rnd 29: (7sc,inc)*3 (27)
Rnd 30: (8sc,inc)*3 (30)
Rnd 31: (9sc,inc)*3 (33)
Rnd 32: (10sc,inc)*3 (36)
Rnd 33: (11sc,inc)*3 (39)
Rnd 34: (12sc,inc)*3 (42)
Rnd 35: (6sc,inc)*6 (48)
Rnd 36: (7sc,inc)*6 (54)
Rnd 37: (8sc,inc)*6 (60)
Rnd 38: 60sc (60)
Change to golden yarn
Rnd 39: crab stitch x60 (60); Make a sl st and FO. Weave in the ends.
Optional: Decorate the hat with golden yarn.

Nose
(with skin colour yarn)
Rnd 1: 6sc in mr (6)
Rnd 2: (inc)*6 (12)
Rnd 3: 12sc (12)
Rnd 4: (sc,dec)*4 (8)

Stuff the nose.
FO leaving a long tail. Sew through the front loops only and pull tight to close the hole. Don’t cut the rest of yarn.

Left Hand
(with skin colour yarn)
Rnd 1: 6sc in mr (6)
Rnd 2: (sc,inc)*3 (9)
Rnd 3: 9sc (9)
Rnd 4: 3 hdc in one st, 8sc (11)
Rnd 5: 2dec,7sc (9)
Stuff a little bit, change to red colour and continue with the arm;

Arm
Rnd 6: 9blsc (9)
Rnd 7-10: 9sc (9)

FO leaving a long tail of yarn.

Right Hand
(with skin colour yarn)
Rnd 1: 6sc in mr (6)
Rnd 2: (sc,inc)*3 (9)
Rnd 3: 9sc (9)
Rnd 4: 8sc,3hdc in one st (11)
Rnd 5: 7sc,2dec (9)
Stuff a little bit, change to red colour and continue with the arm.

Apron
With white yarn. The apron will be worked in rows.
Row 1: 3ch (count as a st), 7dc in mr (8), turn.
Row 2: 3ch and 1dc in same stitch, (2dc in next stitch)*7 (16), turn.
Row 3: 3ch, 2dc in next stitch, (1dc, 2dc in next stitch)*7 (24), turn.
Row 4: (3ch, skip one st, sl st)*11, 3ch, slst in 3rd ch.
FO and weave in the ends.
With white yarn chain 25. Attach the chain to the beginning of the upper (straight)
part of the apron and make 2sc in each dc. Continue by making 25ch.

FO and weave in the ends.
Optional: Decorate the apron with golden yarn.

Hair
Cut the orange yarn in 10 pcs about 30 cm each. Fold each one in half and with a hook pass them, between rounds 19-20, through the 5th st left of the nose and make a slip knot.
Repeat 4 more times in the 6th, 7th, 8th and 9th st.
Repeat on the right side of the nose.
Tie them with a bow each and cut the hair in the desired length. You can also braid the hair if you like.

Assembly
• Sew the feet onto the body on round 3 (to 5) leaving 3 sts apart.
• Sew the nose between rounds 18-20.
• Sew the arms between rounds 19-20 right beside the hair.
• Sew the hat onto the body.

More Amigurumi Gnome Ideas:

Materials and tools:
– Yarn in two colors
– Hook
– fur for beard
– Needle for sewing details
– A piece of plastic or cardboard for the bottom
– Weighting agent so that the gnome does not fall over (the author has 10-kopeck coins, you can put glass balls from “FIX price”)

Legend:
KA – amigurumi ring
sbn – column without nakmda
pr – increase
nice – beautiful
w – bump (three columns with two crochets from one loop)

Amigurumi New Year’s Gnome Free Pattern

Hands (2 parts)
Row 1: 6 sb in KA
2p.: (2 sc, inc) * 2 (8)
3-15 rubles: 8 sb

Mittens (2 parts)
Row 1: 6 sb in KA
2p.: (1 sc, inc) * 3 (9)
3rd row: 1 sc, inc, 5 sc, inc, 1 sc (11)
4th: 11 sb
5r.: 2 sbn, sh, 8 sbn
Row 6-7: 11 sc
8r .: 11 sbn (crawl step)

The left mitten is knitted in the same way, only the 5th row is knitted as follows:
5r.: 8 sbn, sh, 2 sbn
We knit a cone from three columns with two crochets from one loop.

We begin to knit a gnome.

Head-Body
Row 1: 6 sc in KA
2p: 6 increments (12)
3 rows: (1 sbn, inc) * 6 (18)
4r.: 1 sb, inc, (2 sb, inc) * 5, 1 sb (24)
5 rubles: (3 sb, inc) * 6 (30)
6r .: 2 sb, inc, (4 sb, inc) * 5, 2 sb (36)
7r.: (5 sc, inc) * 6 (42)
8r.: 3 sb, inc, (6 sb, inc) * 5, 3 sb (48)
We cut the bottom to size from cardboard or plastic and fix it.
9-14 p.: 48 sb
15r.: 5 sb, dec, (10 sb, dec) * 3, 5 sb (44)
16th: 44 sb
17 rubles: (9 sbn, dec) * 4 (40)
18th: 40 sb
19r.: 4 sb, dec, (8 sb, dec) * 3, 4 sb (36)
20 rubles: 36 sb
21st: (7 sb, dec) * 4 (32)
22-23: 32 sb
Row 24: 3 sb, dec, (6 sb, dec) * 3, 3 sb (28)
25 rubles: 28 sb
26p.: (5 sc, dec) * 4 (24)
27r .: We knit the hands: 4 sbn, then we take the hand and together with the body we knit 4 sbn, 8 sbn, we take the second hand and again we knit 4 sbn together with the body, 4 sbn (24)
28r.: (4 sc, dec) * 4 (20)
29 rubles: 20 sb
30 rubles: (3 sbn, dec) * 4 (16)
31r: 16 sc
32 rubles: (2 sb, dec) * 4 (12)
33 rubles: (1 sb, dec) * 4 (8)
We tighten the loops, fasten the thread.

Nose
Row 1: 6 sb in KA
2p: 6 increments (12)
3rd: 12 sc
4p.: (1 sc, dec) * 4

Cap
Row 1: 6 sb in KA
2p.: 6 sc
3r.: (1 sc, inc) * 3 (9)
4th: 9 sb
5r.: 1 sc, inc, (2 sc, inc) * 2, 1 sc (12)
6th: 12 sc
7r.: (3 sc, inc) * 3 (15)
Row 8: 15 sc
9r.: 2 sb, inc, (4 sb, inc) * 2, 2 sb (18)
10 rubles: 18 sb
Row 11: (5 sc, inc) * 3 (21)
12th: 21 sb
Row 13: 3 sleep, inc. (6 sc, inc) * 2, 3 sc (24)
14th: 24 sb
15 rubles: (7 sb, inc) * 3 (27)
16th: 27 sb
Row 17: 4 sc, inc, (8 sc, inc) * 2, 4 sc (30)
18th: 30 sb
19 rubles: (9 sb, inc) * 3 (33)
20 rubles: 33 sb
Row 21: 5 sb, inc, (10 sb, inc) * 2 (36)
22 rubles: 36 sb
23 rubles: (11 sb, inc) * 3 (39)
24 rubles: 39 sb
25r .: 6 sb, inc, (12 sb, inc) * 2, 6 sb
26p.: 42 sc
You can sew a pompom to the cap (make it yourself or buy ready-made).
The cap can be decorated with buttons or other paraphernalia. It must be sewn in front of the nose so that it does not fall off, and also fastened with stitches on the arms and back.

Sew on the nose.

Beard
We cut a beard from fur, sew it on.The beard can be from the fur of an old toy or yarn, a voluminous merino is well suited. It can also be made from wool for felting or weft for dolls.

More Amigurumi Gnome Ideas:

Legend: 
KA – amigurumi vp 
/ vpn ring – air loop / 
vp lift sbn – single 
crochet column s1n – single crochet column prib 
– increase 
uber – decrease

Amigurumi Christmas Gnomes Free Pattern

NOSE : solid color 
1 row – 6 sat in KA 
2 row – (1 sat) * 3 = 9 
3, 4 rows – 9 sat 
5 rows – (1 sat, kill) * 3 = 6, leave the thread for sewing. 

HANDLES: 2 pieces, start with a skin color. 
1 row – 6 sbn in the spacecraft 
2 row – 6 prib = 12 
3 row – (5 cbl, prib) * 2 = 14 
4 – 6 rows / 3 rows / – colors of the suit – 14 pbc 
7 row – (5 sbn, killed) * 2 = 12 
8 – 10 rows / 3 rows / – 12 sat 
11 row – 6 kill = 6
12 row – 3 kill = 3, you can leave a thread for sewing, and you can tie the handles in the body. 

BODY: (translator’s note – I propose to knit in the opposite direction: from the bottom up) 
to start with the color of the suit 
1 row – 6 sbn in KA 
2 row – 6 prib = 12 
3 row – (1 pbl, prib) * 6 = 18 
4 row – ( 2 crib, prib) * 6 = 24 
5 row – (3 cbn, prib) * 6 = 30 
6 row – (4 cbn, prib) * 6 = 36 
7 row – (5 sbn, prib) * 6 = 42, circle the contour of the part and cut the tight bottom of the 
8th row – behind the JSP 42 satn 
9 – 21 rows / 13 rows / – 42 satn 
22 row – (5 sat, slab) * 6 = 36, fill the part
if you want to knit handles, then knit 22 row like this: 1 sbn, 3 sbn with handle, 1 sbn, ub, (5 sbn, ub) * 2, 1 sbn, 3 sbn with knob, 1 sbn, ub, (5 sbn, killed) * 2 = 36 
23 – 29 rows / 7 rows / – solid – 36 sat 
30 rows – (4 sat, kill) * 6 = 30, stuff, then stuff 
31 rows along the course – (3 bun, kill) * 6 = 24 
32 row – (2 sbn, ub) * 6 = 18 
33 row – (1 sbn, ub) * 6 = 12 
34 row – 6 ub = 6, pull loops. 

CAP: need wire for the tip of the cap. 
1 row – 6 sbn in spacecraft (do not ring the ring until the wire is inserted !!!) 
2 – 15 rows / 14 rows / – 6 sat 
16 row – (1 sat, surf) * 3 = 9 
17 row – (2 sat , prib) * 3 = 12 
18 row – (3 sbn, prib) * 3 = 15 
19 row – (4 sbn, prib) * 3 = 18
20 row – (5 sbn, prib) * 3 = 21 
21 row – (6 cbn, prib) * 3 = 24 
22 row – (7 cbn, prib) * 3 = 27 
23 row – (8 sbn, prib) * 3 = 30 
24 a row – (9 sbn, prib) * 3 = 33 
25 a row – (10 sbn, prib) * 3 = 36 
26 a row – (11 sbn, prib) * 3 = 39 
27 a row – (12 sbn, prib) * 3 = 42 
228 – 33 rows / 5 rows / – 42 sat 
34 rows – (4 sat, prib) * 8, 2 sat = 50 
35, 36 rows – 50 sat 
Embroidered snowflakes. Design the tip of the cap with a pom-pom and wire (see photo). Fill the wide part and glue the cap to the head.