Abbreviations
MR– magic ring
Ch– chain
Slst– slip stitch
Sc– single crochet
Inc– increase
Dec– decrease
(..)* – repeat till the end of round
*(..)– total number of stitches in the round

Materials
• Cotton ricorumi; grey (059), white (001), black (060)
• Crochet hook: 3 mm
• 6mm safety eyes. You need to use smaller / larger eyes, depending on hook/ yarn size.
• Yarn needle
• Black embroidery thread
• Fiberfill for stuffing
• Scissors

• Size with the materials above will be about 10 cm.

Amigurumi Easy Donkey Rattle Free Pattern:

Head & Body
Stuff as you go along your work.
In grey
Rnd 1. MR, 6sc (6)
Rnd 2. (inc) * (12)
Rnd 3. (1sc, inc)* (18)
Rnd 4. (2sc, inc)* (24)
Rnd 5. (3sc, inc)* (30)
Rnd 6. (4sc, inc)* (36)
Rnd 7. 36sc (36)
Rnd 8-9. 36sc (36)
Rnd 10. (5sc, inc)* (42)
Rnd 11-14. 42sc (42)
Insert the security eyes between Rnd10 and 11.
Rnd 15. (5sc, dec)* (36)
Rnd 16. (4sc, dec)* (30)
Rnd 17. (3sc, dec)* (24)
Rnd 18. (2sc, dec)* (18)
Rnd 19. (2sc, inc)* (24)
Rnd 20. 24sc (24)
Rnd 21. (3sc, inc)* (30)
Rnd 22-24. 30sc (30)
Rnd 25. (4sc, inc)* (36)
Rnd 26-29. 26sc (36)
Rnd 30. (5sc, inc)* (42)
Rnd 31. 42sc (42)
Rnd 32. BLO (5sc, dec)* (36)
Finish to stuff.
Rnd 33. (2sc, dec)* (27)
Rnd 34. (1sc, dec)* (18)
Rnd 35. (dec)* (9)
Rnd 36. (1sc, dec)* (6)
Fasten off and close.

Muzzle
In white
Rnd 1. Make ch 6. Crochet around the ch. Start in second ch from hook. 4sc, 3sc in last ch, 3sc on the other side of the ch, inc (12)
Rnd 2. inc, 4sc, (inc)*2, 4sc, inc (16)
Rnd 3. 16sc (16)
Sew the muzzle under the eyes.
Embroidery the nostrils in black embroidery thread.

Ears (x2)
In grey
Rnd 1. MR, 4sc (4)
Rnd 2. (1sc, inc)* (6)
Rnd 3. (2sc, inc)* (8)
Rnd 4. (3sc, inc)* (10)
Rnd 5. (4sc, inc)* (12)
Rnd 6-10. 12sc (12)
Row 1. Flatten the ear and crochet through both layers now, 6sc (6)
Sew the ears on the top of the head.

Mane
In black.
Cut multiple strips of yarn and make many lark’s head knots
Taking 1 strand at a time and using your crochet hook, pull the strands through a stitch between the ears to create a loop. Pull your ends through the loop and pull tight.
Complete this step many times.

Tail
In grey, ch 10, 1 slst in second ch from hook, 8 slst (9)
Cut 2 strips of black yarn and make lark’s head knot on the tail.
Sew the tail to the back of the body.

Arms (x2)
In black
Rnd 1. MR, 4sc (4)
Rnd 2. (1sc, sc)* (6)
Rnd 3. 6sc (6)
In grey.
Rnd 4-8. 6sc (6)
Sew the arms to the body.
Congratulations, you have completed the amigurumi donkey pattern.

More Amigurumi Rattle Ideas:

Abbreviations
Rnd: Round
MR: Magic ring
Ch: Chain
Slst: Slip stitch
Sc: Single crochet
Inc: Increase
Dec: Decrease
Dc: Double crochet
Hdc: Half double crochet
BLO– Back loop only
()*: Repeat till the end of round
[]: total number of stitches in the round

Materials
• Cotton ricorumi (grey, white, black)
• Crochet hook size: 3 mm
• Yarn needle
• Security eyes 6 mm
• Fiberfill for stuffing
• Stitch marker
• Black embroidery thread
• Scissors

Amigurumi Crochet Donkey Free Pattern:

Head
Start in white or light grey.
Rnd 1. MR, 6 sc [6]
Rnd 2. (inc)* [12]
Rnd 3. (1sc,inc)* [18]
Rnd 4. 18 sc [18]
Change to grey.
Rnd 5. (2sc,inc)* [24]
Rnd 6. 24 sc [24]
Rnd 7. (3sc,inc)* [30]
Rnd 8. 30 sc [30]
Rnd 9. (2sc,inc,2sc)* [36]
Rnd 10-16. 36 sc [36]
Insert the safety eyes between rnds 9 and 10 with approx 6 stitches apart.
Rnd 17. (dec,4sc)* [30]
Rnd 18. (3sc,dec)* [24]
Rnd 19. (2sc,dec)* [18]
Stuff.
Rnd 20. (dec,1sc)* [12]
Rnd 21. (dec)* [6]
Fasten off and close.
Embroider the nostrils with black thread.

Body
In grey.
Rnd 1. MR, 6 sc [6]
Rnd 2. (inc)* [12]
Rnd 3. (1sc,inc)* [18]
Rnd 4. (2sc,inc)* [24]
Rnd 5. (3sc,inc)* [30]
Rnd 6. BLO: (2sc,inc,2sc)* [36]
Rnd 7-12. 36 sc [36]
Rnd 13. (dec,4sc)*3, dec, 16sc [32]
Rnd 14-15. 32 sc [32]
Rnd 16. (dec,3sc)*3, dec, 15sc [28]
Rnd 17-18. 28 sc [28]
Rnd 19. (dec,2sc)*3, dec, 14sc [24]
Rnd 20. 24 sc [24]
Rnd 21. (2sc,dec)* [18]
Fasten off, leaving a tail for sewing to the head.

Ears (Make 2)
In grey.
Rnd 1. MR, 6 sc [6]
Rnd 2. (1sc,inc)* [9]
Rnd 3. (2sc,inc)* [12]
Rnd 4. 12 sc [12]
Rnd 5. (3sc,inc)* [15]
Rnd 6. 15 sc [15]
Rnd 7. (4sc,inc)* [18]
Rnd 8-11. 18 sc [18]
Rnd 12. (4sc,dec)* [15]
Fasten off, leaving a tail for sewing.
Fold the ear in half and sew both sides together.

Arms (Make 2)
Start in black.
Rnd 1. MR, 6 sc [6]
Rnd 2. (inc)* [12]
Rnd 3. BLO: 12 sc [12]
Rnd 4. 12 sc [12]
Change to grey.
Rnd 5-9. 12 sc [12]
Stuff.
Rnd 10. (4sc,dec)* [10]
Rnd 11-12. 10 sc [10]
Rnd 13. (3sc,dec)* [8]
Fold in half and crochet through both sides 4sc. Fasten off, leaving a tail for sewing.

Mane
Take black yarn at the top of the head, starting in the middle between the ears.
Make a ch 5, crochet 4 slst along the ch and join to a stitch in the head with 1 slst.
Continue crocheting chains.

Legs (Make 2)
Start in black.
Rnd 1. MR, 7 sc [7]
Rnd 2. (inc)* [14]
Rnd 3. BLO: 14 sc [14]
Rnd 4. 14 sc [14]
Change to grey.
Rnd 5. 14 sc [14]
Rnd 6. (5sc,dec)* [12]
Rnd 7. 12 sc [12]
Stuff.
Rnd 8. (4sc,dec)* [10]
Rnd 9-10. 10 sc [10]
Rnd 11. (3sc,dec)* [8]
Fold in half and crochet through both sides 4 sc. Fasten off, leaving a tail for sewing.

Tail
Make a ch 7. Fasten off. Add black fringes.

More Amigurumi Donkey Ideas:

Materials
• Snowball Amigurumi hand knitting ropes;
• Gray (K920) color rope
• Black (K940) color rope
• Blue (K551) color rope
• White (K010) color rope
• 2.5 mm crochet hook
• Fiber

Abbreviations
R: row
mc: magic circle
sc: single crochet
inc: increase
dec: decrease

Amigurumi Cute Donkey Free Pattern:

Head
Weave gray color with rope.
R1) mc into 6sc
R2) (1inc)*6 (12sc)
R3) (1sc, 1inc)*6 (18sc)
R4) (2sc, 1inc)*6 (24sc)
R5) (3sc, 1inc)*6 (30sc)
R6) (4sc, 1inc)*6 (36sc)
R7) (5sc, 1inc)*6 (42sc)
R8-10) 42sc
R11) (6sc, 1inc)*6 (48sc)
R12-14) 48sc
R15) (7sc, 1inc)*6 (54sc)
R16-19) 54sc
R20) (8sc, 1inc)*6 (60sc)
R21-23) 60sc
R24) (8sc, 1dec)*6 (54sc)
R25) (7sc, 1dec)*6 (48sc)
R26) (6sc, 1dec)*6 (42sc)
R27) (5sc, 1dec)*6 (36sc)
R28) (4sc, 1dec)*6 (30sc)
R29) (3sc, 1dec)*6 (24sc)
We fill and finish.

Legs and Body
Weave with black color rope.
R1) mc into 6sc
R2) (1inc) * 6 (12sc)
R3) 12sc
Weave gray color with rope.
R4) (3sc, 1inc) * 3 (15sc)
Weave with blue color rope.
R5) (4sc, 1inc) * 3 (18sc)
R6-8) 18sc
R9) We combine legs with slip-stitch method. (36sc)
R10) (5sc, 1inc) * 6 (42sc)
R11-15) 42sc
Weave gray color with rope.
R16-18) 42sc
R19) (5sc, 1dec)*6 (36sc)
R20) (4sc, 1dec)*6 (30sc)
R21) (3sc, 1dec)*6 (24sc)
We put the arms together for 6sc.

Ears
Weave gray color with rope.
R1) mc into 5sc
R2) (1inc)*5 (10sc)
R3) 10sc
R4) (1sc, 1inc)*5 (15sc)
R5) 15sc
R6) (4sc, 1inc)*3 (18sc)
R7-14) 18sc
R15) (4sc, 1dec)*3 (15sc)
R16-17) 15sc
We’re finishing.

Nose
Weave white color with rope.
1) We pull 7 chains. We knit 3sc, 5 sc in the first loop, 3sc in the last loop and continue to the other side of the chain.
2) We knit 5sc, 3 times 1inc, 5sc, 3 times 1inc, 6sc, 3 times (1sc, 1inc), 6sc, 3 times (1sc, 1inc).
3) We knit 1 sc on each loop in a row straight.
4) We make 3 (2sc, 1inc), 7sc, we make 3 (2sc, 1inc).
5) We knit a row of flats and finish.
After joining the pieces, we process the nose and eyes with black rope. We’re sewing pompoms between the two ears.

More Amigurumi Donkey Ideas:

For work you will need:
yarns Children’s Novelty, Pechora –
gray, beige, dark gray for
donkey, any color of the same thickness
for accessories
– crochet hook number 2;
– eyes
– a gypsy needle
– scissors;
– filler
You can use any yarn suitable color, thickness is not is fundamental. Of fine yarn
A toy of a smaller size will more thick – more.
Hook and spokes should be selected, starting from thickness of the selected yarn.
Crochet: circular, spiral

KA-ring amirugurumi
VP-air loop
RPS-column without crochet
SSN-column with one crochet
PSSN-half-cousin with crochet
UB-reduction (2 loops tie together)
PR-increase (2 loops to be out of
one loop of the previous row)

Amigurumi Donkeys Free Pattern

HEAD
We knit beige (head of nose)
1. 5 VP
2. In the second loop from the hook we bind 3 scs, then 1 sc in 2
The following loops, in the last loop 3 RLS, further along the chain of 1 sc in 2 the following loops (10)
3. In 1 loop of the PR, then 1 RLS, PR, the next 2 loops of 1 sc, 1, 2, OL, 1 RLS per trace 2 loops. (14)
4. 1 RLS, RR, 1СБН, ПР, 4 СБН, ПР, 1 SCN, PR, 3 RLS (18)
5-6. 18 RLS (end of row and color change is obtained approximately in middle spout)

7. Change the thread to the main, gray (color of the trunk) 18 RLS
8. 6 RLS, 6 RR, 6 RLS (24) (loops The increase is The side of the spout opposite where the seam is a change of color (he is on his chin)

9. 24 RLS
10. (3 SCR, OL) * 6 (30)
11. (4 SCR, PR) * 6 (36)
12. (5 SCR, OL) * 6 (42)
13- 18. (42) – 6 rows
19. (5 СБН, УБ) * 6 (36)
Decreases are made for front half loop (see photo), canvas it turns out that the level is not visible.
Filling the head with filler
20. (4 СБН, УБ) * 6 (30)
21. (3 RTS, UB) * 6 (24)
22. (2 SC, UB) * 6 (18)
Adding filler Nuance! If your eyes are regular sewing, further we subtract and close the hole in the head. If screw (like me), do otherwise. We correct the snout of the donkey tighteners, only after them we attach screw eyes, so far hole do not close. We make a tightener for the peephole (see photo). The thread is the same color as the head We insert the needle approximately between 11 and 12 rows (closer to the nose), between with the eyes of 8-9 hinges, we draw a little higher on the sides and wider by 1 loop (for symmetry of the muzzle). .Tak 2-3 times, the thread is fixed. The ends can be tied and hide inside the head. We insert the eyes, check the symmetry, get a little from the top of the filler’s head, to fix the eyes, to fill the head.
23. (1СБН, УБ) * 6 (12)
24. 6 UB (6)
. Use the needle of the loop to tighten and sew We will do the tightening on the spout after fixing the ears

Ears
The main part, we knit gray.
1. SC, (6) RLS
2. (1 SC, PR) * 3 (9)
3- 4. (9) 5. (2 SC, OL) * 3 (12)
6. (1 SC, OL) * 6 (18)
7. (18) 8. (5 SCR, OL) * 3 (21) 9 -16. (21) 17. (5 СБН, УБ) * 3 (18) 18. (1 СБН, УБ) * 6 (12)

To ears bent in different directions, at this stage, you need to insert the frame- wire. The length of the ear is 6 cm, so for each you need a wire 16 cm long, (ends of 1.5 cm will be inside the head) We fold the bottom of the ear, connect-bind the edge for both sides connect. loops. We leave a long string for sewing The second ear is knitted similarly.

INSIDE THE EAR
knit with beige thread (like nose)
1. 11 VP, from the second loop from the hook knit 3 connect hinges, 7 RLS.
2. Do PP, turn knitting, we knit 6 RLS (lifting loop replaces first loop), 3 will connect the loops further 1 VP, knit on the second side mirror 3 connect loops, 7 sc.
3. PP, turn knitting, 5 sc, 4 connect the loops, the fifth to the top details, 4 hinges, 6 RLS We leave the thread for sewing. Apply this part to the main ear, we sew (we do not introduce the needle Through, and sew over the top wall of the main ear, everything will be look exactly and neat)

CULTIVATION
1. SC, 6 sc
2. 6 PR (12)
3. (1 SC, PR) * 6 (18)
4. (2 SC, OL) * 6 (24)
5. (3 SCR, PR) * 6 (30)
6. (4 sc, ap) * 6 (36)
7. (5 SCR, PR) * 6 (42)
8. (6 SCN, OL) * 6 (48)
9.- 16. (8 rows) (48)
17. (6 СБН, УБ) * 6 (42)
18. (42)
19. 6 RLS, (3 RLS, UB) * 6, 6 RLS (36) (in this set of 6 deductions, after 3 can put a marker, this will be the middle pusik, when assembling a convenient landmark to observe symmetry)
20. (36)
21. (4 SCN, UB) * 6 (30)
22. (3 SCN, UB) * 6 (24)
23. (2 SC, UB) * 6 (18)
24. (4 SCN, UB) * 3 (15)
Leave a thread of 20 cm for sewing the head Fill the body with filler

TUM (like the gray donkey in the photo) 1 OPTION
1. SC, 6 sc
2. 6 PR (12)
3. (1 SC, PR) * 6 (18)
4. (2 SC, OL) * 6 (24)
5. (3 SCR, PR) * 6 (30)
6. (4 sc, ap) * 6 (36) 2

OPTION (like a blue donkey) – on a photo
1. SC, 6 sc
2. 6 PR (12)
3. (1 SC, PR) * 6 (18)
4. (2 SC, OL) * 6 (24)
5. (3 SCR, PR) * 6 (30)
6. (4 sc, ap) * 6 (36)
7. Make a more elongated, oval shape. 6 СБН, 3СБН in one loop, 8 СБН, 3 in 1 loop, 7 SCN, 1 SSN, 2 PRSP, 2 SSN, 1 PRSP, 2 SSN, 2 PRSP, 1 SSN, 1 SSN Leave the sewing thread 20 cm

LEGS
We knit in dark gray color
1 . SC, 6 sc
2. 6 PR (12 sc)
3. (3 SCR, OL) * 3 (15)
4. (4 SCR, OL) * 3 (18)
5. (18)
6. (4 СБН, УБ) * 3 (15)
7. (3 RTS, UB) * 3 (12)
8. (12 СБН) beige color
The ends of the threads are fixed inside We knit the main color
9-10. (12 sc)
11. (3 SCR, OL) * 3 (15)
12. (15 sc)
13. (4 SC, OL) * 3 (18)
14.-16. (18 sc)
We fill the leg
17. (4 SCN, UB) * 3 (15)
18. (3 RTS, UB) * 3 (12)
19. 6 UB Remove the remaining hinges and sew them with a needle.
We leave the thread for sewing 30 cm (we will sew both legs)
The second leg is knitted similarly, the edge of the gray thread at the end of the knitting is fixed and we hide inside of a leg

Hand writing. In the 12-13th series we formed an ulnar bend, take the handle, inside of the elbow to yourself , in the middle from below, we introduce a needle between beige and dark gray series, as if wrapping along the handle, above also between these rows, a little tighten, straighten the thread so she went smooth. Then again, enter the bottom in the same place and we deduce above, in the likeness as we did on We insert the needle either to the left or To the right and to the bottom. linen-as will be more accurate). On the picture worked a little higher on the floor of the loop. At the bottom we tie the thread and hide it inside

TAIL
We knit with a gray thread We retreat to the threads of 20 cm, we make a spacecraft (this thread we sew the tail)
1. SC, 6 sc
2. (2 SC, OL) * 2 (8)
3.-5. (8 sc)
6. (2 СБН, УБ) * 6 (6)
7.-8. (6CBN)
We fix the thread, so we leave everything, for The remaining loops will be fastened with a brush tail Collecting the head The bottom of the ears is folded in half, sewed, fixed to the head with needles, between ears 3 cm, the hat sits perfectly. Ears are fastened approximately between 15-17 rows. We form the spout with the thread of the spout color. We introduce the angle θ into the first loop of the first series nose (it can be seen in the canvas, the left corner of the nose) – we show in the same row in the right extreme loop. We enter at an angle of 45 degrees between 4 and 5 rows (slightly tighten thread), we draw the needle symmetrically in the opposite left side, and enter in the first loop (whence started the contraction). Then we draw the needle at the same angle below – between 4 and 5 rows, approximately 3 loops lower from the upper corner of the nose and insert the needle symmetrically to the right, directing the needle into the very first loop. Nostrils and the mouth is formed. So repeat again, pulling the thread. . However, not so It is important to observe exactly this order, the main principle is to understand and form the nostrils and mouth. Then we go through a black or a dark thread the same image on the ready-made features of the muzzle and, if desired, make the eyebrows

We sew our hands, we make a thread, (you can be buttoned). Prikalyvayu both hands to the trunk to fix them, I sew this way- we stick the needle from the outside of one hand through the trunk and bring it out The needle is on the outside of the second arm, retreating 3 loops to the side (along the row) we stick the needle and pass through the trunk back outside the second hand

To the limbs remained mobile, On the outside of the hand is a small stitch, and from the inside of the hand we hold needle all the time through one hole. A thread we fix from the inside of the hand, so that it was not seen. Legs sewn similar way. Sew a tail when it is sewn, the last stitch is done through the trunk and remove the needle in the lower abdomen, In the middle, through one loop we introduce a needle again in a pussy and put out through the trunk to the tail, we just tighten the thread, fix it, the navel is obtained.

HAIRSTYLE
We wrap the thread around 2 fingers, from the bottom cut the entire beam, it’s a set for tail brushes and hair. We fix the threads as shown in the photo, the area on the head determine how you like. In this donkey it is from ear to ear, in width – 3 rows, if the “shock” was a little long, you can cut it. On ponytail fasten on the edge

MARACAS
1. SC, 6 sc
2. -6. 6 RLS
7. (1 SC, PR) * 3 (9)
8.-9. 9 RLS
10. (2 SC, OL) * 3 (12)
11. 12 RLS of colored thread
12. 12 RLS
13. (2 СБН, УБ) * 3 (9) we fill filler
14. (1 СБН, УБ) * 3 (6) close hole BUCKET 1

BUCKET
1.KA, 6 sc
2. 6 PR (12)
3. (1 SC, PR) * 6 (18)
4. (2 SC, OL) * 6 (24)
5. (3 SCR, OL) * 6 (32)
6. We knit the back half loop for 32 RLS
7.-19 (32 sc)
20. (3 sc, vp) so until the end of the series, under VP skip one loop of the base, Repeat 4 loops. Obtained through every 3 hole loops in which we let’s pass the lace.
21.-22. (32 sc) In a bag to pass or a ready lace, or bind 30 VP and after passing through connect the chain. Choose colors for accessories any, drawing too.

PONCHO (hook can take 2.5 or 2 slightly free to knit)
1. 32 VP
2. 32 VP
3. 7 sc, 3 sc in one loop) * 4 (40)
4. 40 RLS
5. 8 sc, 3 sc in 1 loop, (9 sc, 3 SBN in 1 loop) * 3, 1 sc (48 sc)
6. 48 RLS
7. 9 sc, 3 sc in 1 loop, (11 sc, 3 RLS in 1 loop) * 3, 2 sc (56)
8. 56 RLS
9. 10 sc, 3 sc in 1 loop, (13 sc, 3 RLS in 1 loop) * 3, 3 RLS (64)
10. 64 RLS
11. 11 sc, 3 sc in 1 loop, (15 sc, 3 sc in 1 loop) * 3, 4 sc (72)
12. 72 RLS (in each 4 picos-3 loop RLS blue, 1 RLS light green + pico,)

SOMBRERO
1. SC, 6 sc
2. (1 SC, PR) * 3 (9)
3. (2 SC, OL) * 3 (12)
4. (3 SCR, OL) * 3 (15)
5. (4 SCR, OL) * 3 (18)
6. 18 RLS
7. (5 SCR, OL) * 3 (21)
8. 21 RLS
9. (6 SCR, OL) * 3 (24)
10. 24 RLS
11. 24 RVS
12. (3 SCR, PR) * 6 (30)
13. 2 RLS, RR, 2 RLS, 7 VP (at the bottom we pass 7 loops of the base, we inject hook in 8 loop), 2 RLS, RR, 2 RLS, RR, 2 RLS, 7 VP (at the bottom we pass 7 loops bases, we stick a hook in 8 loop), 2 RLS, PR (34)
14. (16 SCR, OL) * 2 (36)
15. (5 SCR, OL) * 6 (42)
16. (6 SCR, OL) * 6 (48)
17. (7 SCR, OL) * 6 (54)
18. (8 SCN, OL) * 6 (60)
19. (9 SCR, OL) * 6 (66)
20. (10 SCR, OL) * 6 (72)
We turn the hat and knit from the wrong side (see photo). When we do Lapel, to the outside turned out the front side Change color
21. (RLS, PRSP, 3SSN, PRSP, SSN, SS) * 9 (72) Change color
22. (PRSP, SSN, 3SS, RLS, PRSP, CLO) * 9 (72) Change color
23. 72 RLS. That’s all ! To all obedient loops and beautiful toys !!!

Amigurumi Crochet Donkey Pictures: