This Amigurumi Panda crochet pattern creates a soft, huggable plush toy with classic panda colors, rounded shapes, and expressive facial details.
Designed for plush yarn lovers, this pattern is ideal for crocheters who want to make a large, high-quality amigurumi animal suitable for gifts, room decor, or selling finished items.

📏 FINISHED SIZE

Approx. 30 cm (12 inches) tall
(Size may vary depending on yarn type, hook size, and tension.)

🧶 MATERIALS

• Bulky / velvet / chenille yarn (#5 weight recommended)
  • Color A: Black (main details)
  • Color B: White (body & head)
• Small amount of thinner black and white yarn (facial embroidery)
• Crochet hook: 4.0 mm (G)
• Polyester fiberfill stuffing
• Yarn needle (long)
• Stitch markers
• Safety eyes: 2 × 15 mm

📌 ABBREVIATIONS (US TERMS)

• st / sts – stitch / stitches
• ch – chain
• sl st – slip stitch
• sc – single crochet
• inc – increase (2 sc in one stitch)
• dec – decrease (single crochet 2 together)
• BLO – back loop only
• FLO – front loop only
• (…) – stitch count at end of round

Pattern is worked in continuous rounds unless stated otherwise.

🐾 ARMS (Make 2)

Start with black yarn

Ch 6.

Round 1:
Starting in 2nd ch from hook, working in back loops only:
inc, 3 sc, inc.
Continue on opposite side of chain: inc, 3 sc, inc. (14)

Round 2:
inc, 5 sc, inc, inc, 5 sc, inc. (18)

Rounds 3–8:
sc around (18)

Rounds 9–16:
Each round: dec once, then sc to end of round, reducing by 1 stitch each round until 10 sts remain.

Lightly stuff.
Fold opening flat and seam closed with sc through both layers.
Fasten off and hide yarn.

🐾 LEGS (Make 2)

Round 1: 7 sc in MR (7)
Round 2: inc around (14)
Round 3: (inc, sc) around (21)
Round 4: (sc, inc, sc) around (28)
Round 5: BLO – (3 sc, inc, 3 sc) around (32)
Rounds 6–7: sc around (32)
Round 8: (3 sc, dec, 3 sc) around (28)
Round 9: 10 sc, 4 dec, 10 sc (24)
Round 10: 8 sc, 4 dec, 8 sc (20)
Rounds 11–22: sc around (20)

Stuff firmly at bottom, lightly toward top.
Fasten off and continue to body.

🐼 BODY

Place legs side by side, fronts facing away.

Round 1:
Join yarn through both inner leg stitches.
sc around left leg (20), continue to right leg and sc around (20). (40)

Switch to white yarn.

Round 2: sl st around (40)
Round 3: BLO – (inc, 3 sc) around (50)
Rounds 4–12: sc around (50)
Round 13: (4 sc, dec, 4 sc) around (45)
Round 14: sc around (45)
Round 15: (dec, 7 sc) around (40)
Round 16: sc around (40)

Switch to black yarn.

Round 17: sl st in BLO around (40)
Round 18: BLO – (3 sc, dec, 3 sc) around (35)
Round 19: sc around (35)
Round 20: (dec, 5 sc) around (30)

Mark stitch placement for arms.

Round 21:
Attach arms while sc around (30)

Round 22: (dec, 3 sc) around (24)

Stuff body firmly.

🐼 HEAD

Switch to white yarn.

Round 23: sl st in BLO around (24)
Round 24: BLO – (sc, inc, sc) around (32)
Round 25: (inc, 3 sc) around (40)
Round 26: (2 sc, inc, 2 sc) around (48)
Round 27: (inc, 11 sc) around (52)
Rounds 28–38: sc around (52)
Round 39: (dec, 11 sc) around (48)
Round 40: (2 sc, dec, 2 sc) around (40)
Round 41: (dec, 3 sc) around (32)
Round 42: (sc, dec, sc) around (24)

Insert eyes.
Stuff head firmly.

Round 43: (dec, sc) around (16)
Round 44: dec around (8)

Close opening, fasten off, hide yarn.

👃 SNOUT

With white yarn, ch 4.

Round 1:
From 2nd ch: inc, sc, inc.
Opposite side: inc, sc, inc. (10)

Round 2: 2 inc, sc, 4 inc, sc, 2 inc (18)
Round 3: Expand evenly to 26 sts
Rounds 4–5: sc around (26)

Lightly stuff and sew to face.

👂 EARS (Make 2)

Ch 4 with black yarn.

Round 1: inc, sc, inc on both sides (10)
Round 2: inc, 3 sc, 2 inc, 3 sc, inc (14)
Round 3: inc, 5 sc, 2 inc, 5 sc, inc (18)
Rounds 4–5: sc around (18)

Fold flat, seam closed, sew to head.

👁️ EYE PATCHES (Make 2)

Ch 5 with black yarn.

Round 1: inc, 2 sc, inc on both sides (12)
Round 2: Shape with clusters and decreases to form oval.

Attach safety eyes through patches, then sew patches to face.

✨ FACIAL DETAILS

• Embroider nose with black yarn
• Outline eyes lightly with white yarn
• Add mouth and eyebrows with thin black yarn
• Gently sculpt face by tightening stitches beneath eyes

🐾 TAIL

Round 1: 6 sc in MR
Round 2: inc around (12)
Rounds 3–5: sc around (12)

Flatten, seam closed, and sew to back of body.

📜 COPYRIGHT & USAGE

This is an original rewritten pattern prepared for
amigurumi.badoomobile.net

✔ You may sell finished panda toys
❌ You may not sell or redistribute this pattern

Please credit amigurumi.badoomobile.net when sharing finished items.

🎨 Finished Amigurumi Panda– Color Variations and Accesories

This cute teddy bear wearing non-removable pants is crocheted mostly in one piece, making it sturdy, beginner-friendly, and perfect as a handmade gift or nursery decor.
The bear has a soft, rounded shape with simple details and clean color transitions.

When made with the recommended materials, the finished teddy bear measures approximately 19 cm (7.5 inches) tall, excluding the ears.

📌 Pattern Information

• Skill level: Beginner to Intermediate
• Construction: Legs, body, and head worked in one piece
• Pants: Integrated (non-removable)
• Language: US crochet terms

🧶 Materials

• Yarn: YarnArt Jeans (55% cotton / 45% acrylic, 160 m / 50 g)
  • Main color (bear)
  • Pants color
  • White (muzzle)
• Hook: 3.0 mm
• Safety eyes: 9 mm
• Fiberfill stuffing
• Tapestry needle
• Scissors
• Optional: small decorative button

✂️ Abbreviations (US Terms)

• MR – Magic Ring
• ch – chain
• sl st – slip stitch
• sc – single crochet
• inc – increase (2 sc in one stitch)
• dec – decrease (sc 2 together)
• BLO – back loop only
• FLO – front loop only
• ( ) – stitch count at end of round
• * – repeat instructions

🐻 Arms (make 2)

R1: 6 sc in MR (6)
R2: inc × 6 (12)
R3: (1 sc, inc) × 6 (18)
R4–7: 18 sc (4 rounds)
R8: (4 sc, dec) × 3 (15)
R9–10: 15 sc (2 rounds)
R11: (3 sc, dec) × 3 (12)
R12–13: 12 sc (2 rounds)
R14: (4 sc, dec) × 2 (10)

Stuff the arms lightly (about ⅔ full).
Fold the top flat and crochet across both sides to close.
Fasten off and set aside.

🦵 Legs, Body & Head (Worked in One Piece)

Legs (make 2)

With main color:

R1: 6 sc in MR (6)
R2: inc × 6 (12)
R3: (1 sc, inc) × 6 (18)
R4: (5 sc, inc) × 3 (21)
R5: (6 sc, inc) × 3 (24)
R6: (7 sc, inc) × 3 (27)

Change to pants color:

R7–9: 27 sc (3 rounds)

Fasten off only the first leg.
Do not cut yarn on the second leg.

Joining Legs & Body

From the second leg, chain 3 and join to the first leg.

R10:

• 27 sc around first leg
• 3 sc into chains
• 27 sc around second leg
• 3 sc into chains (60)

R11: (27 sc, inc, 1 sc, inc) × 2 (64)
R12: 64 sc
R13: (31 sc, inc) × 2 (66)
R14–17: 66 sc (4 rounds)
R18: (9 sc, dec) × 6 (60)
R19–20: 60 sc (2 rounds)
R21: (8 sc, dec) × 6 (54)

Slip stitch and cut pants yarn.

Upper Body (Main Color)

Attach main color yarn at the back of the body.

R22: (7 sc, dec) × 6 (48)
R23: BLO – 48 sc
R24: 48 sc
R25: (6 sc, dec) × 6 (42)
R26: 42 sc
R27: (5 sc, dec) × 6 (36)
R28: 36 sc
R29: (4 sc, dec) × 6 (30)
R30: (3 sc, dec) × 6 (24)
R31–32: 24 sc (2 rounds)

Attach Arms

R33: Attach arms on the sides while crocheting
(2 sc, dec) × 6 (18)

Head

R34: inc × 18 (36)
R35: (5 sc, inc) × 6 (42)
R36: (6 sc, inc) × 6 (48)
R37: (7 sc, inc) × 6 (54)
R38: (8 sc, inc) × 6 (60)
R39: (9 sc, inc) × 6 (66)
R40: (10 sc, inc) × 6 (72)
R41–48: 72 sc (8 rounds)

Insert safety eyes between R44 and R45, spacing evenly.

R49: (10 sc, dec) × 6 (66)
R50: (9 sc, dec) × 6 (60)
R51: (8 sc, dec) × 6 (54)
R52: (7 sc, dec) × 6 (48)
R53: (6 sc, dec) × 6 (42)
R54: (5 sc, dec) × 6 (36)
R55: (4 sc, dec) × 6 (30)
R56: (3 sc, dec) × 6 (24)
R57: (2 sc, dec) × 6 (18)
R58: (1 sc, dec) × 6 (12)
R59: dec × 6 (6)

Stuff firmly.
Fasten off and close opening.

👂 Ears (make 2)

R1: 6 sc in MR (6)
R2: inc × 6 (12)
R3: (3 sc, inc) × 3 (15)
R4: (4 sc, inc) × 3 (18)
R5–7: 18 sc (3 rounds)

Fasten off, leave long tail for sewing.

👃 Muzzle

With white yarn:

R1: 6 sc in MR (6)
R2: inc × 6 (12)
R3: (1 sc, inc) × 6 (18)
R4: (2 sc, inc) × 6, 1 sc, sl st

Fasten off, leave tail.
Embroider nose with black yarn.

👖 Pants Strap

Attach pants color yarn to the front loop of Round 23, slightly off-center.

R1: FLO – sc in each stitch around, sl st
Do not cut yarn.

Chain 28–30 (adjust as needed).
Attach strap to the front of pants with sl st.
Fasten off and weave in ends.

Sew a small button to the front for decoration.

✨ Finishing

• Sew ears to the sides of the head
• Sew muzzle centered below the eyes
• Weave in all loose ends

Your teddy bear in pants is now complete 🧸💙

© COPYRIGHT & USAGE

This pattern is written exclusively for amigurumi.badoomobile.net.
You may sell finished toys made from this pattern.
Please do not redistribute or resell the pattern itself.

🎨 Finished Amigurumi Teddy Bear in Pants– Color Variations and Accesories

This Amigurumi Heidi Doll crochet pattern is a detailed and elegant design featuring a classic doll silhouette with long legs, a removable dress, a hat, a small bag, and textured hair.
The pattern is suitable for intermediate crocheters and includes step-by-step instructions for each body part.

📏 FINISHED SIZE

Approx. 30–35 cm (12–14 inches) tall
(Size may vary depending on yarn and hook size.)

🧶 TOOLS & MATERIALS

• 2.5 mm crochet hook
• Scissors
• Yarn needle (wide eye)
• Sewing needle + black thread (for eyes & facial details)
• Safety eyes or black beads
• Fiberfill stuffing

Yarn (Suggested – you may substitute):

• Main body color (skin tone / beige)
• Dress colors: Pink & Red
• Hair color: Brown / Coffee
• Hat color: Optional
• Small amount of white yarn (details)

📌 ABBREVIATIONS (US TERMS)

• MR – Magic Ring
• sc – Single crochet
• dc – Double crochet
• hdc – Half double crochet
• inc – Increase (2 sc in same stitch)
• dec – Decrease (single crochet 2 together)
• sl st – Slip stitch
• ch – Chain
• (…) – Stitch count

Pattern is worked in continuous rounds unless stated otherwise.

🧸 HEAD

1. MR 6 sc (6)
2. inc x6 (12)
3. (sc, inc) x6 (18)
4. (2 sc, inc) x6 (24)
5. (3 sc, inc) x6 (30)
6. (4 sc, inc) x6 (36)
7. (5 sc, inc) x6 (42)
8. (6 sc, inc) x6 (48)
9. (7 sc, inc) x6 (54)
10. (8 sc, inc) x6 (60)
11. (9 sc, inc) x6 (66)
12. (10 sc, inc) x6 (72)
    13–21. sc around (72)
13. (11 sc, inc) x6 (78)
    23–29. sc around (78)
14. (11 sc, dec) x6 (72)
15. (10 sc, dec) x6 (66)
16. (9 sc, dec) x6 (60)
17. (8 sc, dec) x6 (54)
18. (7 sc, dec) x6 (48)
19. (6 sc, dec) x6 (42)
20. (5 sc, dec) x6 (36)
21. dec x18 (18)

Insert eyes, stuff firmly, close and fasten off.

👗 BODY

Join legs with 6 chains, connect in the center.

1. sc around (60)
   2–10. sc around (60)
2. (8 sc, dec) x6 (54)

Change color (dress base).

12. sc around (54)
13. (7 sc, dec) x6 (48)
    14–26. sc around (48)
14. (6 sc, dec) x6 (42)
15. sc around (42)

Attach arms while crocheting:
29. Join arms evenly – total (50 sc)
30. dec x4 near arm joints (46)
31. dec x4 near arm joints (42)
32. (5 sc, dec) x6 (36)
33. (4 sc, dec) x6 (30)
34. (3 sc, dec) x6 (24)
35. (2 sc, dec) x6 (18)
36–38. sc around (18)

Stuff firmly and close.

👣 LEGS & FEET (Make 2)

1. ch 7, work around chain (12)
2. Increase on both sides (18)
   3–8. sc around (18)
   9–14. Short rows shaping heel
3. sc around (18)
   16–21. sc around (18)
4. (3 sc, inc), 8 sc, inc, 5 sc (20)
   23–27. sc around (20)
5. (4 sc, inc), 9 sc, inc, 5 sc (22)
   29–33. sc around (22)
6. (5 sc, inc), 10 sc, inc, 5 sc (24)
   35–47. sc around (24)

Stuff and fasten off.

✋ ARMS (Make 2)

1. MR 6 sc
2. inc x6 (12)
3. (sc, inc) x6 (18)
   4–7. sc around (18)
4. (4 sc, dec) x3 (15)
   9–23. sc around (15)

Change color if desired.
24–35. sc around (15)
Stuff lightly and fasten off.

💇 HAIR (WIG)

1. MR 10 sc
2. dc inc x10 (20)
3. (dc, inc) x10 (30)
4. (2 dc, inc) x10 (40)
5. (3 dc, inc) x10 (50)
6. (4 dc, inc) x10 (60)
   7–10. sc around (60)

Add chained curls around the head as decorative strands.

🎩 HAT

1. MR 6 sc
2. inc x6 (12)
3. (sc, inc) x6 (18)
4. (2 sc, inc) x6 (24)
5. (3 sc, inc) x6 (30)
6. (4 sc, inc) x6 (36)
7. (5 sc, inc) x6 (42)
8. (6 sc, inc) x6 (48)
9. (7 sc, inc) x6 (54)
10. (8 sc, inc) x6 (60)
11. (9 sc, inc) x6 (66)
12. (10 sc, inc) x6 (72)
13. (11 sc, inc) x6 (78)
    14–20. sc around (78)
14. (3 sc, inc) around
15. (4 sc, inc) around
    23–26. sc around

👜 BAG

Base worked in oval shape, then rows up.
Create handle with 47 chains, attach to sides.

👗 DRESS

• Start with 84 chains
• Work 37 rows straight
• Shape waist with even decreases
• Change color and work skirt
• Divide top into 4 sections for neckline shaping
• Assemble pieces following body proportions

🧵 ASSEMBLY

• Sew head to body
• Attach legs evenly
• Add hair, hat, bag, and dress
• Embroider facial details

📜 COPYRIGHT & USAGE

This pattern is an original rewritten design prepared for amigurumi.badoomobile.net
You may sell finished dolls.
You may not resell or redistribute this pattern.

🎨 Finished Amigurumi Heidi Doll – Color Variations and Accesories

🧶 Materials

• Sport / DK weight yarn
  • Beige (main color)
  • Multicolor or pastel yarn (pants / details)
  • White (muzzle)
• 2.0 mm crochet hook
• Polyester fiberfill
• Black embroidery thread (eyes & nose)
• Yarn needle & stitch marker

✂️ Abbreviations (US Terms)

• MR – magic ring
• sc – single crochet
• inc – increase (2 sc in one stitch)
• dec – decrease (sc2tog)
• sl st – slip stitch
• ch – chain
• ( ) x n – repeat n times
• – stitch count

🧸 Arms (make 2)

Work with beige yarn.

R1: 6 sc in MR [6]
R2: inc x 6 [12]
R3: (2 sc, inc) x 4 [16]
R4–5: 16 sc
R6: (2 sc, dec) x 4 [12]
Change to multicolor yarn
R7–11: 12 sc
Lightly stuff the arm.
Fold flat and sc across to close.
Fasten off, leave tail for sewing.

🧸 Legs (make 2)

Work with multicolor yarn.

R1: 6 sc in MR [6]
R2: inc x 6 [12]
R3: (sc, inc) x 6 [18]
R4–6: 18 sc
R7: (4 sc, dec) x 3 [15]
R8–9: 15 sc
Stuff lightly.

Fasten off first leg.
Do NOT cut yarn on second leg.

🧸 Body

Join legs:

R10: ch 3, join to first leg, 15 sc around first leg, 3 sc in chains, 15 sc around second leg, 3 sc in chains [36]
R11: (5 sc, inc) x 6 [42]
R12–16: 42 sc
R17: (5 sc, dec) x 6 [36]
R18: (4 sc, dec) x 6 [30]
Stuff body firmly.

Change to beige yarn.

🧸 Head

Continue in beige.

R19: inc x 30 [60]
R20–24: 60 sc
R25: (8 sc, dec) x 6 [54]
R26: (7 sc, dec) x 6 [48]
R27: (6 sc, dec) x 6 [42]
R28: (5 sc, dec) x 6 [36]
R29: (4 sc, dec) x 6 [30]
R30: (3 sc, dec) x 6 [24]
R31: (2 sc, dec) x 6 [18]
R32: (sc, dec) x 6 [12]
R33: dec x 6 [6]

Stuff head well, close and hide yarn.

🤍 Muzzle

With white yarn:

R1: 6 sc in MR [6]
R2: inc x 6 [12]
R3: (sc, inc) x 6 [18]

Fasten off.
Sew muzzle to face between rounds 8–12.

🧵 Facial Details

• Embroider a small triangle nose
• Stitch curved sleepy eyes
• Add tiny eyebrows
• Optional: blush cheeks with pink powder

👂 Ears (make 2)

With beige yarn:

R1: 6 sc in MR [6]
R2: inc x 6 [12]
R3: (sc, inc) x 6 [18]

Flatten, do not stuff.
Sew to head between R13–17.

🐻 Tail

R1: 6 sc in MR [6]
R2: (sc, inc) x 3 [9]
R3: 9 sc

Lightly stuff and sew on back.

🎀 Bow / Ribbon

With multicolor yarn:

Into MR:
(ch 3, 3 dc, ch 3, sl st) x 2

Tighten ring, wrap center, sew near ear.

🌙 Finished Size

Approx. 18–20 cm depending on yarn and hook size.

🎨 Finished Amigurumi Sleepy Baby Bear – Color Variations

Materials
I used mixed  yarn to make Jack (58% cotton and 48% acrylic):
– nude for skin
– blue for hoodie
– brown for pants
– gray for hair
– light brown for details

Others
needle compatible with wire
needle for sewl
piece of wire or hot glue stick
Safety eyes with lock 10mm
termolina
a piece of plastic for the
feet filling
white  fabric ink (optional)

Abbreviations
sc : Single Crochet
inc : Increase
dec : Decrease
st: Stitch
hdc: Half Double Crochet
sl-st : Slip Stitch
ch : Chain
..in : make increase into same stitch as many as the number which is given in front of “inc” abbreviation (exp; 3inc, 4inc..).
FLO : Crochet into front loops only
BLO : Crochet into back loops only

To make my Jack, I used needle 1.8 and he was left with 16.5cm, and can change the size depending on the material you use.

Amigurumi Crochet Jack Frost (Rise of the Guardians) Doll Free Pattern:

Legs x2
Start with the nude yarn and make 7 chains:
1. turn back on the second chain and (5sc, 3sc-inc, 4sc, inc) (14)
2. (inc, 4sc, 3inc, 4sc, 2inc) (20)
3. BLO – 20slst
4. BLO – 20sc
5. (4sc, 6dec, 4sc) (14)

Place a piece of plastic from the width of the bottom of the slipper so that it is a straight base, then proceed with the recipe normally:

6. (5sc, 2dec, 5sc) (12)
7 – 10. 12sc (4 rows)
Change to brown yarn:
11. BLO – 12sc
12 – 23. 12sc (12 rows)
Finish the first leg, but not the second.

Before starting the second leg, return to the career left in BLO and do 12sc all around.
Line up the legs by making another 5sc on the second leg, or the amount needed to reach the side, and make 2 chains:
24. (12sc on first leg, 2sc in chains, 12sc on second leg, 2sc in chains) (28)
25 – 27. 28sc (3 rows)

Change to blue yarn:
28. (6sc, dec, 12sc, dec, 6sc) (26)
29. BLO – 26sc
Now stop a little doing the body and make the detail of the second leg that was not even made in the first. Go back in the 11th row left in FLO and do 12pb all around for the finish

30. (5sc, dec, 11sc, dec, 6sc) (24)
31 – 39. 24sc (9 rows)
40. 12dec

Change to nude yarn:
41. BLO – 12slst
42. BLO – 12sc
43 – 49. 12sc (7 rows)

Place a piece of wire or hot glue stick around your neck so that it is firm and hold your head.
50. 6dec
Close with inverted MR and fast off.

Hoodie Details
With a new blue yarn, insert into the hoodie bar, in the handles left in FLO of row 29.

1. (12sc, inc) x2 (28)
2. 28sc
Fasten off.

Hoodie Pocket
With blue yarn make 7ch and from the 2nd chain:
1. 6sc, 1ch and turn;
2. 6sc, 1ch and turn;
3. (dec, 2sc, dec), 1ch and turn (4)
4. 4sc, 1ch and turn;
5. (1sc, dec, 1sc) (3)

Fasten off.
Stick it on the front of the hoodie.

Hoodie
Before making the initial chains, leave the long thread to the seam of the hood on Jack’s back.
With the blue yarn make 8ch and from the second:
1., 7sc, 1ch and turn;
2. (inc, 5sc, inc) 1ch and turn; (9)
3. (inc, 7sc, inc) 1ch and turn; (11)
4 – 5. 11sc, 1ch and turn; (2 rows)
6. (inc, 9sc, inc) 1ch and turn; (13)
7 – 8. 13sc, 1ch and turn; (2 rows)
Fold in half and sew where we made the last 13sc career.
Then sew on Jack’s back in the last career of the blue hoodie.

Head
Star with nude  yarn:
1. MR, 6sc
2. 6inc (12)
3. (1sc, inc) x6 (18)
4. (1sc, inc, 1sc) x6 (24)
5. (3sc, inc) x6 (30)
6. (2sc, inc, 2sc) x6 (36)
7. (5sc, inc) x6 (42)
8. (3sc, inc, 3sc) x6 (48)

9 – 18. 48sc (10 rows)
19. (3sc, dec, 3sc) x6 (42)
20. (5sc, dec) x6 (36)
Put safety eyes between rows 14 and 15.
21. (2sc, dec, 2sc) x6 (30)
22. (3sc, dec) x6 (24)
23. (1sc, dec, 1sc) x6 (18)
24. (2sc, dec, 2sc) x3 (15)

Put filling in the right amount and leave the space in the center of the head for then manage to put the neck extension inside.

25 – 31. 15sc (7 rows)
32. 7dec (8)
Close with inverted magic ring and fasten off.

Expression of Eyes
Make expression in the eyes as in the images below.
I used white and black yarn to make the details of the eyes and eyebrow.
Preferably use a thinner black yarn.

Ears x2
With nude yarn:
1. MR, 6sc (sew ears on the head 4/5sc away from the eyes).

Arms x2
With nude yarn:
1. MR, 8sc
2 – 3. 8sc (2 rows)
Change to blue:
4. BLO – 8sc
5 – 15. sc (11 rows)

Join the two sides and make 4sc.
Now make 8sc with blue yarn at points left in row 4 in FLO.
Sew arms between rows 39 and 40 of the body.

Pants details
Cut a piece of the ligth brown yarn to make the details of Jack’s pants. It’s the braid he’s got as detail.
See the images as a reference.

Opcional
If you want to make the sweatshirt look like there’s snow on Jack’s shoulders, take the white  fabric paint and with a pin go making little dots.

Hair
With gray yarn:
1. MR, 6sc
2. 6inc (12)
3. (1sc, inc) x6 (18)
4. BLO – (1sc, inc, 1sc) x6 (24)
5. (3sc, inc) x6 (30)
Now we’ll start the wicks, then make 1slst:
1. 15ch, from the 2nd chain (1slst, 1sc, 12hdc), 1slst
2. 14ch, from the 2nd chain (1slst, 1sc, 11hdc), 1slst
3. 10ch, from the 2nd chain (1slst, 1sc, 7hdc), skip 1 stitch, 1slst
4. 9ch, from the 2nd chain (1slst, 1sc, 6hdc), skip 1 stitch, 1slst
5. 10ch, from the 2nd chain (1slst, 1sc, 7hdc), 1slst
6. 9ch, from the 2nd chain (1slst, 1sc, 6hdc), skip 1 stitch, 1slst
7. 10ch, from the 2nd chain (1slst, 1sc, 7hdc), skip 1 stitch, 1slst
8. 14ch, from the 2nd chain (1slst, 1sc, 11hdc), 1slst
9. 15ch, from the 2nd chain (1slst, 1sc, 12hdc), 1slst
10 – 18. 16ch, from the 2nd chain (1slst, 1sc, 1hdc, 12dc), skip 1 stitch, 1slst
At the last wick we won’t skip any stitch.

Second layer of wicks:
note: this layer will be made “backwards”, the wicks need to be turned with the right side down to give the desired effect on amigurumi.
Take the first point exactly like the photo below (from outside to center), so the wicks will look the way they need to stay.
Hitch a new gray yarn at the last point made in BLO of row 4 and make:
1 – 5. 16ch, from the 2nd chain (1slst, 1sc, 1hdc, 12dc), skip 1 stitch, 1slst
6 – 9. 12ch, from the 2nd chain (1slst, 1sc, 1hdc, 8dc), skip 1 stitch, 1slst
Third layer of wicks:
1. MR, 6sc
Close with 1slst
1 – 6. 8ch, from the 2nd chain (1slst, 1sc, 5hdc), 1slst
Fast off and hide the  yarn

Tidying hair
Pin the entire first layer of hair. Wick one is behind Jack’s right ear and wick 9 behind his left ear. Once positioned, glue all the hair.
The second layer of wicks was made “backwards”, so it will look different.
Position and paste as well. The smaller wicks need to be positioned on top of the fringe.
And finally paste the third layer also “backwards”. Then take two wicks on Jack’s right side and glue them over the top to give the tuft effect.

Staff
Start with brown yarn:
Make 25ch and from the second chain:
– 2sc, inc, 4sc, inc, 7sc, 3sc-inc, 8sc (28)

Fast off and hide the yarn.
You’re going to need to glue the staff so it’s in the right position.

You can dilute some white glue with water and apply with a brush. The same measure of water for the same measure of white glue. Wait for it to dry completely and then remove the pins.
I did this process twice (front and back) to be very firm.

Congratulations, you just finished your Jack Frost!

More Amigurumi Jack Frost Doll Ideas:

Tools & Materials
TOOLS
Crochet hook size: 3.00mm
Yarn needle
Scissors & Glue

MATERIALS
Yarn size DK
Nude: head, nose, arms
Red: body, arms
Yellow: hat, arms, legs
Blue: body
Black: hat, body, legs
White: hair, head & body

Yarn strands:
Black: eyebrows, moustache
Dusty pink: blush
Red: mouth
Yellow:buttons, belt buckle
Fiberfill/polyfil
Safety eyes size: 6.00mm

Tips
– The doll is crocheted continuously in round unless it’s stated otherwise.
– Always flip inside out so the right side is facing you.
– RIGHT and LEFT doll’s body parts on pattern are written based on doll’s POV.
– Always STUFF as you go and STUFF FIRMLY without stretching the stitches.
– Doll can be made using other yarn and hook size.

Abbreviations
MR: magic ring
ch: chain
sc: single crochet
hdc: half double crochet
dc: double crochet
tc: triple crochet
bo: bobble stitch
inc: increase (2 sc in 1 st)
dec: invisible decrease
flo/blo: front loop only / back loop only
sl st: slip stitch
st, sts: stitch, stitches
rnd, rnds: round, rounds

Amigurumi Nutcracker Toy with a Awesome Costume Free Pattern:

Head & Body
color: nude, white, red, black, blue
start in nude
01. 6 sc in MR (6)
02. (inc) x 6 (12)
03. (sc, inc) x 6 (18)
04. (sc, inc, sc) x 6 (24)
05. (sc 3, inc) x 6 (30)
06. (sc 2, inc, sc 2) x 6 (36)
07-10. sc 36 (4 rnds) (36)
11. sc 16 (in nude), sc 4 (in white), sc 16 (in nude) (36)
change to red
12. sc 16 (in red), sc 4 (in black), sc 16 (in red) (36)
13. sc 16 (in red), sc 4 (in white), sc 16 (in red) (36)
14-16. sc 17 (in red), sc 2 (in white), sc 17 (in red) (3 rnds) (36)
change to black
17. sc 36 (36)
change to blue
18. sc 36 (36)
19. (sc 2, dec, sc 2) x 6 (30)
20. (sc 3, dec) x 6 (24)
21. (sc, dec, sc) x 6 (18)
22. (sc, dec) x 6 (12)
23. (dec) x 6 (6)
cut yarn, pull without fasten off, close-off round, hide tail inside

Hat
color: black, yellow
start in black
01. 6 sc in MR (6)
02. (inc) x 6 (12)
03. (sc, inc) x 6 (18)
04. (sc, inc, sc) x 6 (24)
05. (sc 3, inc) x 6 (30)
06. (sc 2, inc, sc 2) x 6 (36)
07-08. sc 36 (2 rnds) (36)
09. (sc 10, dec) x 3 (33)
10-11. sc 33 (2 rnds) (33)
12. (sc 9, dec) x 3 (30)
13. sc 30 (30)
change to yellow
14. sc 30 (30)
change to black
15. (in flo) (hdc 2, inc, hdc 2) x 6 (36)
cut yarn, pull without fasten off, make an invisible sl st, leave a long tail to sew

Nose
color : nude
01. ch 3 (3)
Cut yarn, fasten off, leave a long tail to sew

Hair (make 6)
color: white
01. ch 6 (6)
02. (crochet back on 3rd ch), dc 4 (4)
Cut yarn, fasten off, leave a long tail to sew

Arms (make 2)
color: nude, red, yellow
start in nude
01. 6 sc in MR (6)
change to red
02-03. sc 6 (6)
change to yellow
04. sc 6 (6)
Cut yarn, fasten off, leave a long tail to sew

Legs (make 2)
color: black, yellow
start in black
01. 6 sc in MR (6)
02. (sc, inc, sc) x 2 (8)
03. sc 8 (8)
change to yellow
04. sc 8 (8)
Cut yarn, fasten off, leave a long tail to sew

Assembly
EYES
place safety eyes in rnd 8 (6 sts in between both safety eyes)

ARMS
sew arms in rnd 12 (6 sts in between both arms)

LEGS
sew legs in rnd 18 (5 sts in between both legs)

NOSE
sew nose vertically from rnd 6 to rnd 9 (middle of eyebrows to middle of moustache)

BLUSH
using pink yarn, sew blush next to eye in rnd 9 (sew 1 st long horizontally 2 times)

EYEBROWS
using black yarn strand (2 ply), sew eyebrows in rnd 6 (sew 3 sts long horizontally, 4 sts between both eyebrows)

MOUSTACHE
using black yarn strand (2 ply), sew moustache from rnd 9 (next to nose) to rnd 10 (sew 4 sts long diagonally 2 times)

HAIR
sew 1st hair from rnd 6 to rnd 8 sew 2nd hair from rnd 8 to rnd 10 sew 3rd hair from rnd 10 to rnd 11 sew 2 sts for upperside and 2 sts for 2nd dc in horizontal sides and sew 2 sts for both vertical sides, leave the rest of hair curled up (12 sts in between both hair)

HAT
place hat with first st of last round’s hat meets first st of nutcracker’s head in rnd 6, sew hat to head using tail of hat

BUTTONS
using yellow yarn strand (3 ply), make 2 french knots as buttons on rnd 14 and rnd 15, sew buttons in front body (4 sts in between both knots, 4 french knots in total) using yellow yarn strand (2 ply), sew line between french knots on rnd 14 and rnd 15 (sew 4 sts long horizontally, 2 lines in total)

BELT BUCKLE
using yellow yarn, sew belt buckle in the middle of belt (sew 3 sts long horizontally and 1 st long vertically)

More Amigurumi Doll Ideas:

What I used
4,5mm hook
Himalaya Dolphin Baby: light green, two shades of brown, blue, white, skin color
16mm eyes
Overview
The pattern is written in US terminology
With my materials, the plushy is about 20 cm tall

Abbreviations
MR: Magic Ring
Sc: Single crochet
Inc: Increase
Dec: Decrease
Slst: Slip Stich
FLO: Front Loop Only
Ch: Chain
Dc: double crochet

Materials
Yarn of your choice
Needle
Safety eyes
Scissors
Stuffing
First, we start by crocheting Luigi’s feet and body. The body of the toy is crocheted in 20 rounds and it is recommended that you fill these parts of the toy while crocheting.

Amigurumi Super Mario’s Brother Luigi Free Pattern:

Legs(x2) and Body
Start with brown
R1 MR 6sc (6)
R2 6inc (12)
R3 BLO 12sc
Switch to Blue
R4-6 12sc
Leg #1 fasten off
Leg #2 ch2,
join with leg #1 (with a sc)
-> That sc is the first of R6
R7 28sc
R8 (6sc, inc) repeat 4 times (32)
R9 (7sc, inc) repeat 4 times (36)
R10-14 36sc (5 rounds)
-> start stuffing
Switch to green
R15 13sc, BLO 10sc, 13sc (36)
R16 (4sc, dec) repeat 6 times (30)
R17-18 24sc (2 rounds)
R19 (3sc, dec) repeat 6 times (24)
R20 (2sc, dec) repeat 6 times (18)
-> stuff
-> fasten off
After completing the body of the toy, we can crochet the overalls. Then you will need to sew the overalls to the body of the toy.

Overalls
Blue
Go back to R15, start on the right side
R1 10hdc (10)
R2 ch1, turn, 10hdc
R3 ch14, starting in 2nd chain from the hook:
sc13, slst, 10sc,
ch14, starting in 2nd chain from the hook: sc13, slst -> sew the straps on the back

Luigi’s arms are crocheted using white and green colors and it is recommended that you stuff them lightly.

Arms 2x
White
R1 MR 8sc (8)
R2 8sc
Switch to green
R3-7 8sc (8)
-> stuff a little
-> sc together
-> sew on body between R19 & 20
After crocheting the arms, you need to sew them between rounds 19 and 20 of the body. Now we will crochet the head of the toy.

Head
Skin color
R1 MR 6
R2 6inc (12)
R3 (Sc, inc) repeat 6 times (18)
R4 (2sc, inc) repeat 6 times (24)
R5 (3sc, inc) repeat 6 times (30)
R6 (4sc, inc) repeat 6 times (36)
R7 (5sc, inc) repeat 6 times (42)
R8-14 42sc (7 rounds)
-> Eyes between R11&12 (8sc apart)
R15 (5sc, dec) repeat 6 times (36)
R16 (4sc, dec) repeat 6 times (30)
R17 (3sc, dec) repeat 6 times (24)
R18 (2sc, dec) repeat 6 times (18) -> stuff
-> fasten off

The head of the toy has a very detailed design and the most important parts that will make Luigi distinctive are here. After filling the inside of the head, let’s crochet the big and round nose of the toy and then sew it between the eyes.

Nose
Skin color
R1 MR 8
R2 (3sc, inc) repeat 2 times (10)
R3 10sc
R4 (3sc, dec) repeat 2 times (8)
-> sew on head between the eyes R10-12
Luigi has very tiny ears, and they are made only using the magic ring.

Ears 2x
Skin color
R1 MR 5
Slst in the hole and fasten off
-> sew on head, 5sc away from the eyes between R11-12
If you are making one of the Super Mario characters, you need to make a big mustache. Now let’s make the mustache of the toy in 2 rounds. Also, you need to use the double crochet technique when crocheting the mustache of the toy.

Mustache
Brown
R1 ch 6
R2 starting in 2nd chain from the hook: 2dc inc, slst, 2dc inc
-> sew below the nose
The toy’s hair may not be visible because it is under the hat, but if you follow the amigurumi instructions, it looks like it has a lot of hair. Let’s crochet this piece too.

Hair
Brown
R1 MR 6
R2 6inc (12)
R3 (Sc, inc) repeat 6 times (18)
R4 (2sc, inc) repeat 6 times (24)
R5 (3sc, inc) repeat 6 times (30)
R6 (4sc, inc) repeat 6 times (36)
R7 (5sc, inc) repeat 6 times (42)
R8-9 42sc (2rounds)
R10 21dc, 21sc (42)
on the last sc of R10: chain 4,
starting in 2nd chain from the hook: 3sc, slst
R11 26sc, on the 26th sc: chain 4,
starting in 2nd chain from the hook: 3sc, slst

Finally, we crochet Luigi’s big hat and sew all the pieces together.

Hat
Green
R1 MR 6
R2 6inc (12)
R3 (Sc, inc) repeat 6 times (18)
R4 (2sc, inc) repeat 6 times (24)
R5 (3sc, inc) repeat 6 times (30)
R6 (4sc, inc) repeat 6 times (36)
R7 (5sc, inc) repeat 6 times (42)
R8 (6sc, inc) repeat 6 times (48)
R9 (7sc, inc) repeat 6 times (54)
R10 (8sc, inc) repeat 6 times (60)
R11 (9sc, inc) repeat 6 times (66)
R12 (10sc, inc) repeat 6 times (72)
R13-14 72sc
R15 (10sc, dec) repeat 6 times (66)
R16 (9sc, dec) repeat 6 times (60)
R17 (8sc, dec) repeat 6 times (54)
R18 (7sc, dec) repeat 6 times (48)
R19 (6sc, dec) repeat 6 times (42)
R20 FLO 12sc, ch1, turn
R21 12sc, ch1, turn
R22 12sc, slst, finish off

That’s it. Crochet Luigi plush amigurumi toy is ready. I hope you enjoyed making the toy.
More Amigurumi Super Mario’s Brother Luigi Ideas:

ABBREVIATION
– MR – magic ring
– sc – single crochet
– hdc – half double crochet
– dc – double crochet
– inc – increase (2 single crochet in 1 stitch)
– dec – decrease (invisible decrease)
– FLO – front loop only
– slst – slip stitch

MATERIALS
• Yarn: sport or DK light weight yarn. (I used HELLO cotton yarn)
• Crochet hook: 2mm-2.5mm
• Safety eyes size 5mm
• Black embroidery thread
• Fiberfill
• Yarn needles

Amigurumi Crochet Belle Doll in Yellow Dress Step by Step Free Pattern:

HEAD
Start with skin tone yarn.
Rnd 1. 6 sc in MR (6)
Rnd 2. 6 inc (12)
Rnd 3. [sc, inc) repeat 6 times (18)
Rnd 4. [2 sc, inc) repeat 6 times (24)
Rnd 5. sc, inc, [3 sc, inc) repeat 5 times, 2 sc (30)
Rnd 6. [4 sc, inc) repeat 6 times (36)
Rnd 7. 2 sc, inc, [5 sc, inc) repeat 5 times, 3 sc (42)
Rnd 8-13. (6 rnds) 42 sc (42)
Rnd 14. [6 sc, inc) repeat 6 times (48)
Insert the eyes between rnd 14 & 15, with 8-stitches space between them
Rnd 15-18. (4 rnds) 48 sc (48)
Rnd 19. [4 sc, dec) repeat 8 times (40)
Rnd 20. [3 sc, dec) repeat 8 times (32)
Rnd 21. [2 sc, dec) repeat 8 times (24)
Rnd 22. [sc, dec) repeat 8 times (16)
Rnd 23. [2 sc, dec) repeat 3 times, 4 sc (13)
Rnd 24-29. (6 rnds) BLO 13 sc (13)
Rnd 30. 6 dec, sc (7)
Cut the yarn. Pull the neck inside the head.

LEGS
Start with yellow yarn.
Rnd 1. 5 sc in MR (5)
Rnd 2. 5 inc (10)
Rnd 3. BLO 10 sc (10)
Rnd 4. 3 sc, 2 dec, 3 sc (8)
Rnd 5. 8 sc (8)
Switch to skin tone yarn.
Rnd 6-8. (3 rnds) 8 sc (8)
Rnd 9. 6 sc, end round here (6)
Crochet the second leg in the same way till rnd 8.
Rnd 9. 11 sc
Ch 3, join with the first leg.

BODY
Start with skin tone yarn.
Rnd 1-3. 22 sc (22)
Rnd 4. 4 sc, dec, 9 sc, dec, 5 sc (20)
Rnd 5-8. (4 rnds) 20 sc (20)
Rnd 9. [2 sc, dec) repeat 5 times (15)
Rnd 10. [sc, dec) repeat 5 times (10)
Rnd 11. dec, 8 sc (9)
Rnd 12-17. (6 rnds) 9 sc (9)
Rnd 18. 4 dec, sc (5)
Cut the yarn. Close the remaining gap.

ARMS (make two)
With skin tone yarn.
Rnd 1. 6 sc in MR (6)
Rnd 2-7. (6 rnds) 6 sc (6)
Cut the yarn. Leave a long yarn tail for sewing. Sew to the body round 9.

EARS (make two)
With skin tone yarn.
Rnd 1. 3 sc in MR (3)
Cut the yarn. Leave a long yarn tail for sewing. Sew to the head spanning round 15 to round 16.

BUN
With brown yarn.
Rnd 1. 6 sc in MR (6)
Rnd 2. 6 inc (12)
Rnd 3. 12 sc (12)
Rnd 4. 6 dec
Cut the yarn. Leave a long yarn tail. Sew the bun to the top of the head.

HAIR
With brown yarn.
Rnd 1. 6 sc in MR (6)
Rnd 2. 6 inc (12)
Rnd 3. [sc, inc) repeat 6 times (18)
Rnd 4. [ch 33, [2 sc, 30 hdc] on chains, slst to the next st] x 18
Cut the yarn. Hide your yarn tail.

DRESS
With yellow yarn.
ch 16, insert your hook to the foundation chain to make a circle.
Rnd 1. [3 sc, inc) repeat 4 times (20)
Rnd 2. 3 sc, 3 inc, 6 sc, 3 inc, 5 sc (26)
Rnd 3. 3 sc, 2 hdc, 2 hdc inc, 2 hdc, 6 sc, 2 hdc, 2 hdc inc, 2 hdc, 5 sc (30)
Rnd 4. 5 sc, 2 dec, 10 sc, 2 dec, 7 sc (26)
Rnd 5. 3 sc, ch 5, skip 5 sts, 8 sc, ch 5, skip 5 sts, 5 sc (26)
Rnd 6. 26 sc (26)
Rnd 7. ch 2, [dc, dc inc] x 13 (39)
Rnd 8-9. ch 2, 39 dc (39)
Rnd 10. [ch 3, slst to the next st) repeat 3 times8
Cut the yarn. Hide your yarn tail.
That’s it! Belle the Doll is ready!

More Amigurumi Doll Ideas:

MATERIALS
Crochet hook 2.5 Tapestry needle Silicone glue
Black and white Anne yarn
Stuffing
Eyes size 10mm
Turquoise
Canary
Black
White
Chantilly

ABBREVIATION
MR-magic ring
Inc-increase
Sc-single crochet
Blo-back loop
Flo-front loop
Dec-decrease
Ch-chain
slst-slip stitch
hdc-half double crochet
dc-double crochet
tr-Treble crochet

Amigurumi Crochet Alice in Wonderland Free Pattern:

Head
Chantilly
1) 8sc in the MR=8
2) 8inc=16
3) (2inc, 2sc)4x=24
4) 1sc, 2inc, (4sc, 2inc)3x, 3sc=32
5) 2sc, 2inc, (6sc, 2inc)3x, 4sc=40
6)-13) (8rows)=40

Eyes size 10mm Between rows 10 and 11 With 9sc distance Put a little stuffing so as not to lose the shape
14) 2sc, 2dec, (6sc, 2dec)3x, 4sc=32
Now we can place the eyes and do the embroidery of the eyes

15) 1sc, 2dec, (4sc, 2dec)3x, 3sc=24
16) (2dec, 2sc)4x=16
17) 16sc in block =16
18) – 24) (7rows)=16
25) 8dec = 8
26) inverted magic ring
Sink the neck into the head.

Apron
White
4 ch from the second ch 3sc, (1ch, turn 3sc)2x, 1ch turn, slst all around. With the tapestry needle pass the end of the yarn to the other side, forming an apron.

Hair
Canary
1) 8sc in the MR = 8
2) 8inc= 16
3) (2inc, 2sc)4x=24
4) 1sc, 2inc, (4sc, 2inc)3x, 3sc=32
– 1sc, (go up 21ch, from the second ch 20sc, 1slst in the base)14x
– 9ch, from the second ch 1sc, 5hdc, 2dc, skip 2sc of base, 1slst
– 12ch from the second ch 1slst, 1sc, 7hdc, 2dc, skip 2sc of base 5slst
– 12ch from the second ch 1slst, 1sc, 7hdc, 2dc, skip 2sc of base, 1slst
– 9ch, from the second ch 1sc, 5hdc, 2dc, skip 2 sc of base, 1slst
– 21ch, from the second ch 20sc, 1slst in the base, fasten off.
Glue to the wrong side of the head

Black Bow
7ch from 5th ch, 5 tr in the same stitch, 1slst in the same stitch.
In the next stitch, which is the last one in the chain, make 6 tr in the same stitch, 1 slst in the same stitch.
Cut the long yarn and wrap it around the middle of the bow 3 times.

Body
Left leg
Black
1) 6 sc in MR = 6
2) 6sl st in blo=6 White
3) 6sl st in blo =6
4) 6sc in blo =6
5)-6) (2rows) =6
1sl st cut the thread and fasten off the first leg
– in the second leg we repeat the same process, however
5)-7) (3 rows) = 6 go up 1 chain

– Joining the legs
Join with 1sc, 5sc, 1sc in ch, 6sc, 1sc in ch, 6sc, insert the marker =14
1) 14sc in blo=14
2) 14sc=14
Turquoise
3) 14scx blo=14
Whipped cream
4) 14sl st blo =14
5) 14sc blo =14
6) (5sc, 1dec)2x=12
7)-10) (4rows)=12
11) 6dec + inverted magic ring finish

In row 1 of the body there is a white piece
Let’s work with the turquoise color
1) 14inc = 28
2)-4) (3rows) = 28 Fasten off and hide the thread

Arms
Chantilly
5ch from the second ch 4slst leave a long thread to join the arm with the sleeve

Sleeve
Turquoise
1) 6sc in the MR = 6
2) 6sc=6
Put love and patience into your piece
Cut a long thread With the tapestry needle, pass the thread through the sleeve, going to the side of the arm near the magic ring

Joining the Arm and Sleeve There is a video in the reels

Position for sewing the arms to the body
Position for tying the apron.

More Amigurumi Doll Ideas:

Necessary materials
1. Yarn Pekhorka “Children’s novelty” beige, green, white, red and brown.
2. Red floss for the mouth.
3. Eyes on a 9 mm safety mount.
4. Wire 10 cm for head stability.
5. A piece of yellow felt for a plaque on the belt.
6.Filler
• When using these materials, the height of the finished toy is 22 cm.

Abbreviations
MR: Magic ring
Ch: Chain
Sc: Single crochet
Inc: Increase
Dec: Decrease
Slst: Slip stitch
BLO: Back loop only
FLO: Front loop only
Tch: turning chain
Rnd: round

Amigurumi Lanny Santa’s Helper Doll Free Pattern:

Arms (Make 2)
Beige yarn.
Rnd 1. 6 sc in MR
Rnd 2. (1sc, inc)*3 (9)
Rnd 3-4. 9 sc
Rnd 5. (1 sc, dec)*3 (6)
Change yarn to green color.
Rnd 6-18. 6 sc

The beige part of the arms is well stuffed, the green part is weaker, the latter do not fill two rows. Fasten and cut the thread, we will arms tie.

Legs (Make 2)
Green yarn.
Rnd 1. 3 sc in MR
Rnd 2. 3 sc
Rnd 3. 3 inc (6)
Rnd 4-5. 6 sc
Rnd 6. (1 sc, inc)*3 (9)
Rnd 7-9. 9 sc
Rnd 10. (2 sc, inc)*3 (12)
Rnd 11. 12 sc

We crochet in rotary rows without a loop rise.
Rnd 12. turn, 6 sc
Rnd 13. turn, 6 sc
Rnd 14. turn, 6 sc
Rnd 15. turn, 6 sc
Rnd 16. turn, sc, 2 dec,sc
Rnd 17. turn, 2 dec
Next, crochet in a spiral.
Rnd 18. 2 sc (on the edge), dec (grab 1 edge loop and 1 toe loop), 4 sc, dec (grab 1 toe loop and 1 edge loop), 2 sc on the heel (12), fill the sock with filler.
Rnd 19. 12 sc
Rnd 20. (2 sc, dec) * 3 (9), fill the heel
Rnd 21. 9 sc
Change yarn to red
Rnd 22. crochet behind the BLO (1sc, dec) * 3 (6)
Change yarn to white
Rnd 23. 6 sc
Next, we crochet alternating red and white yarn in a row.
Rnd 24-34. 6 sc
We return to the 22nd row and crochet for the FLO.
We attach the green yarn in such a position that the foot looked at you and crochet (2 sc, inc) * 3 (12), fasten the thread and hide. Fasten and cut the thread at the first leg, do not cut the second leg, but continue crocheting.

Body
In the process, we fill the body with filler.
We finished the leg with red yarn, and we will continue with it.
Rnd 35. 4 sc on the second leg, make 6 ch and connect with the first, symmetrically placing our legs. The beginning of the row is behind us.
6 sc on the first leg, 6 sc on the ch, 6 sc on the second leg, 6 sc on the ch (24)
Rnd 36. (3 sc, inc)*6 (30)
Rnd 37. (4 sc, inc)*6 (36)
Change yarn to white
Rnd 38. 36sc
Change yarn to red
Rnd 39. 36 sc
Change yarn to green
Rnd 40. 36 sc
Rnd 41. BLO- 36 sc
Rnd 42-43. 36 sc
Rnd 44. (4 sc, dec)*6 (30)
Rnd 45-46. 30 sc
Rnd 47. (3 sc, dec)*6 (24)
Rnd 48-49. 24 sc
Rnd 50. (2 sc, dec)*6 (18)
Rnd 51. in this row we crochet arms, 3 sc, 3 sc on the loops of the arm and body, 6 sc, 3 sc on the loops of the arm and body, 3 sc.
Rnd 52. 3 sc, 3 sc in the remaining loops of the arm, 6 sc, 3 sc in the remaining loops of the hand, 3 sc.
Rnd 53. (1 sc, dec)*6 (12)
Change yarn to beige
Rnd 54. BLO- 6 dec (6)
Rnd 55. 6 sc
Rnd 56. 6 inc (12) start the head

Head
Rnd 57. (1 sc, inc)*6 (18)
Rnd 58. (2 sc, inc)*6 (24)
Rnd 59. (3 sc, inc)*6 (30)
Rnd 60. (4 sc, inc)*6 (36)
Rnd 61. (5 sc, inc)*6 (42)
Rnd 62. (6 sc, inc)*6 (48)
Rnd 63-69. 48 sc
Rnd 70. (6 sc, dec)*6 (42)
Insert eyes between 67 and 68 rows at a distance of 3-4 sc.
Rnd 71. (5 sc, dec) * 6 (36) insert the wire deeper into the body so that it passes through the body and head.
Rnd 72. (4 sc, dec)*6 (30)
Rnd 73. (3 sc, dec)*6 (24)
Rnd 74. 24 sc
Rnd 75. (2 sc, dec)*6 (18)
Rnd 76. (1 sc, dec)*6 (12)
Rnd 77. 6 dec (6)
pull the hole, hide the thread and cut it off.
We return to the 41st row and knit for the FLO, attaching green yarn so that the legs look down and crochet:

Rnd 1. (5 sc, inc)*6 (42)
Rnd 2-4. 42 sc
Now we return to the 54th row and crochet neck.
Rnd 1.12 sc
Rnd 2. (1 sc, inc)*6 (18)
Rnd 3. 18 sc
We embroider a nose with beige yarn, a mouth red floss.

Hair
Brown yarn.
Rnd 1. 6 sc in MR
Rnd 2. 6 inc (6)
Rnd 3. (1 sc, inc)*6 (18)
Rnd 4. (2 sc, inc)*6 (24)
Rnd 5. (3 sc, inc)*6 (30)
Rnd 6. (4 sc, inc)*6 (36)
Rnd 7. (5 sc, inc)*6 (42)
Rnd 8. (6 sc, inc)*6 (48)
Rnd 9-12. 48 sc

Now we crochet in rotary rows without a turning chain.
Rnd 13. sl st in 2nd st from hook, 33 sc, slst, turn
Rnd 14. sl st in the 2nd loop from the hook, 32 sc, sl st, cut the thread leaving end for sewing.

Bangs
Rnd 1. 4 ch, from the 2nd loop from the hook 3 sc
Rnd 2-9. 3 sc, cut thread leaving end for sewing.
Sew hair and bang to head, embroider the rest of the thread eyebrows.

Ears (Make 2)
Beige yarn
5 sc in MR, pull off, sew to heads are symmetrical to each other.

Cap
Red yarn.
Rnd 1. 6 sc in MR
Rnd 2. 6 inc (12)
Rnd 3-4. 12 sc
Rnd 5. 6 dec (6),fill with filler.
Change yarn to green.
Rnd 6-7. 6 sc
Rnd 8. (1 sc, inc)*3 (9)
Rnd 9. 9 sc
Rnd 10. (2 sc, inc)*3 (12)
Rnd 11. 12 sc
Rnd 12. (3 sc, inc)*3 (15)
Rnd 13. 15 sc
Rnd 14. (4 sc, inc)*3 (18)
Rnd 15. 18 sc
Rnd 16. (5 sc, inc)*3 (21)
Rnd 17. 21 sc
Rnd 18. (6 sc, inc)*3 (24)
Rnd 19. 24 sc
Rnd 20. (7 sc, inc)*3 (27)
Rnd 21. 27 sc
Rnd 22. (8 sc, inc)*3 (30)
Rnd 23. 30 sc
Rnd 24. (9 sc, inc)*3 (33)
Rnd 25. 33 sc
Rnd 26. (10 sc, inc)*3 (36)
Rnd 27. 36 sc
Rnd 28. (11 sc, inc)*3 (39)
Rnd 29. 39 sc
Rnd 30. (12 sc, inc)*3 (42)
Rnd 31. 42 sc
Rnd 32. (13 sc, inc)*3 (45)
Rnd 33-35. 45 sc
Change yarn to red.
Rnd 36-40. 45 sc, fasten and cut the thread leaving the end for sewing a cap to the head.
Twist the red part of the cap, sew it to the head.
We give the cap a lowered position with a couple of stitches.

Belt
We collect a chain from ch along the waist circumference (I have 35 ch) and from the 2nd loops from the hook we crochet 34 sc, we cut the thread, leaving the end for sewing. We attach the belt to the waist, sewing the ends and sewing a couple of stitches along the length of the belt to the body.
We cut out a plaque from felt and glue it to the belt. Optional we tone the cheeks.

More Amigurumi Elf Ideas: