Designed as both a functional seat cushion and a decorative amigurumi plush, it is perfect for children’s rooms, reading corners, nurseries, and cozy play spaces.

The unicorn features an attached head, upper body, and arms that gently rest on the cushion, creating a playful and huggable look while remaining stable and comfortable.

For a limited time, this premium pattern is available completely FREE.

🧶 Skill Level

Intermediate

You should be comfortable with:

• Working in continuous rounds
• Increases and invisible decreases
• Sewing amigurumi parts securely
• Shaping with stuffing
• Attaching large pieces

📏 Finished Size

• Cushion Diameter: 45–50 cm (17.5–19.5 in)
• Cushion Height: 10–15 cm (4–6 in)
• Total Height Including Unicorn Head: 35–40 cm (14–16 in)

Size may vary depending on yarn, hook size, and stuffing density.

🧵 Materials

Yarn:
Bulky / Super Bulky yarn (Category 5–6)

IMPORTANT:
The entire project (cushion base and unicorn body) is designed to be made using the SAME yarn type and thickness.

Using the same yarn ensures a seamless, integrated look and consistent texture throughout the piece.

• Main color (for BOTH cushion and unicorn body): approx. 600–700 g
• Accent color (muzzle, hooves, horn, optional details): approx. 150 g

Other materials:

• Crochet hook: 6.0–7.0 mm
• Safety eyes: 18–20 mm
• Polyester fiberfill (large amount)
• Optional: foam pieces or scrap yarn for extra cushion firmness
• Tapestry needle
• Stitch markers
• Straight pins

🪡 Pattern Notes

• Work in continuous rounds unless stated otherwise.
• Use a stitch marker to mark the beginning of each round.
• Stuff pieces gradually and firmly.
• The cushion base is worked as a large flat spiral, then shaped upward.
• The unicorn upper body is sewn onto the cushion after full assembly.
• For best visual results, use the same yarn brand, weight, and hook size for both the cushion and unicorn parts.

🧩 Pattern Parts Overview

• Cushion Base
• Unicorn Head
• Muzzle
• Ears (2)
• Horn
• Upper Body (Half Torso)
• Arms (2)
• Mane & Tail (Optional)
• Final Assembly

🟡 Cushion Base

With main color, make a magic ring.

Round 1: 6 sc in magic ring (6)
Round 2: inc in each st around (12)
Round 3: (1 sc, inc) × 6 (18)
Round 4: (2 sc, inc) × 6 (24)

Continue increasing in this pattern, adding 1 single crochet between increases each round, until you reach 90–96 stitches, depending on desired cushion diameter.

Side Walls

Work single crochet evenly for 12–15 rounds to build cushion height.

Stuff very firmly.

Optional: place foam or layered stuffing in the center for added structure and stability.

Fasten off and close with a flat seam.

🦄 Unicorn Head

With main color.

Rnd 1: 6 sc in MR (6)
Rnd 2: inc around (12)
Rnd 3: (1 sc, inc) × 6 (18)
Rnd 4: (2 sc, inc) × 6 (24)
Rnd 5: (3 sc, inc) × 6 (30)
Rnd 6: (4 sc, inc) × 6 (36)
Rnd 7: (5 sc, inc) × 6 (42)
Rnds 8–14: sc evenly (42)

Insert safety eyes between rounds 10–11, approx. 10 sts apart.

Rnd 15: (5 sc, dec) × 6 (36)
Rnd 16: (4 sc, dec) × 6 (30)
Rnd 17: (3 sc, dec) × 6 (24)
Rnd 18: (2 sc, dec) × 6 (18)
Rnd 19: (1 sc, dec) × 6 (12)
Rnd 20: dec × 6 (6)

Close and fasten off.

👃 Muzzle

With accent color.

Rnd 1: 6 sc in MR (6)
Rnd 2: inc around (12)
Rnd 3: (1 sc, inc) × 6 (18)
Rnd 4: sc evenly (18)

Stuff lightly, flatten slightly, and sew to lower front of head.

👂 Ears (Make 2)

With main color.

Rnd 1: 6 sc in MR (6)
Rnd 2: (1 sc, inc) × 3 (9)
Rnd 3: sc evenly (9)

Do not stuff. Flatten and sew to top sides of head.

🌀 Horn

With accent color.

Rnd 1: 4 sc in MR (4)
Rnd 2: (1 sc, inc) × 2 (6)
Rnds 3–6: sc evenly (6)

Stuff lightly and attach centered on forehead.

🦴 Upper Body (Half Torso)

With main color.

Rnd 1: 6 sc in MR (6)
Rnd 2: inc around (12)
Rnd 3: (1 sc, inc) × 6 (18)
Rnd 4: (2 sc, inc) × 6 (24)
Rnds 5–10: sc evenly (24)

Stuff firmly.

Flatten bottom opening into an oval shape.
Do NOT close.

🤍 Arms (Make 2)

With main color.

Rnd 1: 6 sc in MR (6)
Rnd 2: (1 sc, inc) × 3 (9)
Rnds 3–7: sc evenly (9)

Stuff lightly.
Flatten opening and leave long tail for sewing.

🦄 Mane & Tail (Optional Decorative Details)

The unicorn can be decorated with a mane and tail to add personality and color.

This step is optional and fully customizable.

Basic Curl Method:

With accent or multicolor yarn:

• Chain 30–40
• Work 3 single crochets into each chain stitch
• Fasten off and leave a long tail for sewing

Make multiple curls as desired.

Sew curls evenly along the top of the head and upper body for the mane.

Attach additional curls at the back of the cushion or upper body area for the tail.

Optional Accessories

Small bows, flowers, stars, or other crochet embellishments may be added.

You may also use our suggested decorative accessories or personalize the unicorn with your own creative additions.

🔧 Final Assembly & Attachment Guide

Assembly Order – Quick Checklist

1. Complete and fully stuff the cushion base
2. Finish all unicorn parts
3. Sew arms onto upper body
4. Attach head to upper body
5. Position unicorn on cushion and pin
6. Sew unicorn to cushion
7. Secure all ends and final shaping

Attachment Method

The unicorn is attached as a decorative upper body only.

The cushion base must be completed, firmly stuffed, and fully closed before assembly begins.

Before attaching:

• Flatten the open edge of the upper body into an oval
• Position unicorn at the center top of the cushion
• Adjust angle for balance
• Pin securely

Attach using a mattress stitch, sewing the flattened oval edge directly onto the cushion surface.

Work slowly and evenly around the entire edge.

Because both parts use the same yarn and tension, the seam blends naturally and appears almost seamless.

⚖ Stability & Weight Distribution

The cushion base is the only weight-bearing structure.

The unicorn is decorative and is not designed to support seating weight.

Flattening the upper body base and using firm stuffing prevents sagging or distortion over time.

For extra durability, reinforce the seam with a second pass of stitching.

✔ Final Finishing Checklist

• All seams tight and secure
• No stuffing visible
• Unicorn sits upright and balanced
• Arms rest naturally
• All ends woven in firmly

💡 Designer Tips

Extra-firm stuffing improves seating comfort.

Neutral cushion colors with pastel unicorn accents tend to be the most popular combination.

Photograph your finished piece in natural light for best results.

📄 Copyright & Usage

This pattern is for personal use and small-scale handmade sales only.

You may sell finished items made from this pattern.

Do not copy, redistribute, translate, or resell this pattern in whole or in part.

Results from our followers

🎨 Finished Realistic Amigurumi Unicorn Floor Cushion – Color Variations and Accesories

The finished dinosaur has a gentle, realistic silhouette while keeping a child-friendly and playful look, making it perfect as a handmade gift, nursery decor, or collectible amigurumi animal.

Project Details

• Skill Level: Intermediate
• Finished Size: Approx. 16–18 cm (6–7 inches)
• Construction: Separate parts, sewn together
• Style: Realistic / Soft sculpted amigurumi

Materials

• Yarn:
  • Sport / Fingering weight yarn (cotton or cotton-blend recommended)
  • Main color (dinosaur body)
  • Contrast color (belly & details)
• Crochet Hook: 1.75 – 2.25 mm (adjust for tight stitches)
• Safety Eyes: 8–10 mm
• Fiberfill stuffing
• Tapestry needle
• Scissors
• Stitch marker
• Embroidery thread (black or dark brown for face details)
• Sewing pins

Abbreviations (US Terms)

• MR – magic ring
• sc – single crochet
• inc – increase (2 sc in one stitch)
• dec – decrease (single crochet 2 stitches together)
• sl st – slip stitch
• ch – chain
• (…) – repeat instructions inside brackets
• – total stitches at end of round

Work in continuous rounds unless stated otherwise.

PATTERN

Head & Body (Worked as One Piece)

R1: 6 sc in MR [6]
R2: inc × 6 [12]
R3: (sc, inc) × 6 [18]
R4: (2 sc, inc) × 6 [24]
R5: (3 sc, inc) × 6 [30]
R6: (4 sc, inc) × 6 [36]
R7: (5 sc, inc) × 6 [42]
R8–R11: sc around [42]

Insert safety eyes between R9–R10, about 7–8 stitches apart.

R12: (5 sc, dec) × 6 [36]
R13: sc around [36]
R14: (4 sc, dec) × 6 [30]
R15: sc around [30]
R16: (3 sc, dec) × 6 [24]
R17: sc around [24]
R18: (2 sc, dec) × 6 [18]
R19: sc around [18]

Begin stuffing firmly.

R20: (1 sc, dec) × 6 [12]
R21: dec × 6 [6]
Fasten off and close opening.

Muzzle

R1: 6 sc in MR [6]
R2: inc × 6 [12]
R3: (sc, inc) × 6 [18]
R4: (2 sc, inc) × 6 [24]
R5: (3 sc, inc) × 6 [30]
R6: sc around [30]

Stuff lightly, flatten slightly, and sew to the front of the head. Embroider nostrils.

Legs (Make 2)

R1: 6 sc in MR [6]
R2: inc × 6 [12]
R3: (sc, inc) × 6 [18]
R4: sc around [18]
R5–R8: sc around [18]

Stuff lightly. Flatten opening and sew to the lower body.

Arms (Make 2)

R1: 6 sc in MR [6]
R2: inc × 6 [12]
R3: (2 sc, inc) × 4 [16]
R4–R7: sc around [16]
R8: (6 sc, dec) × 2 [14]
R9–R16: sc around [14]

Do not overstuff. Sew to sides of body.

Tail

R1: 6 sc in MR [6]
R2: inc × 6 [12]
R3: sc around [12]
R4: (sc, inc) × 6 [18]
R5–R6: sc around [18]
R7: (2 sc, inc) × 6 [24]
R8–R9: sc around [24]

Stuff lightly, taper naturally, and sew to back of body.

Spikes (Make 6–8)

R1: 6 sc in MR [6]
R2: (sc, inc) × 3 [9]
R3: sc around [9]
Fasten off, leave tail for sewing.

Attach spikes from head down the back to the tail.

Belly Patch

R1: 6 sc in MR [6]
R2: inc × 6 [12]
R3: (sc, inc) × 6 [18]
R4: (2 sc, inc) × 6 [24]

Sew to the front underside of the body.

Assembly & Finishing

• Sew muzzle securely and shape gently.
• Attach arms, legs, and tail evenly.
• Sew spikes along the spine.
• Embroider eyebrows and small facial details for expression.
• Check balance and adjust stuffing if needed.

Final Notes

This realistic amigurumi dinosaur combines smooth shaping with soft textures, making it both visually appealing and pleasant to hold. By adjusting yarn colors, you can create endless variations—from classic green dinosaurs to pastel nursery styles.

Perfect for children, collectors, and handmade gift lovers.

Happy Crocheting! 🦖

Pattern created for amigurumi.badoomobile.net

Copyright Notice

This crochet pattern is an original design created by amigurumi.badoomobile.net. All construction methods, stitch sequences, shaping logic, and written instructions are independently developed. © 2026 amigurumi.badoomobile.net. All photos and visual content are the property of amigurumi.badoomobile.net. This pattern is provided for personal use only. You may sell finished handmade items made from this pattern in small quantities. You may not reproduce, resell, translate, redistribute, upload, or claim this pattern or any part of it as your own on any platform. Any unauthorized use, duplication, or distribution will result in DMCA takedown notices and may lead to further legal action.

🎨 Finished Realistic Amigurumi Dinosaur – Color Variations and Accesories

There is a calm strength in a camel at rest.
Sahra is designed to capture that grounded, patient posture — a camel that kneels, waits, and carries stories rather than weight. This is not a stiff standing toy, but a realistic, softly weighted amigurumi that naturally settles into place.

This pattern focuses on joint shaping, balance, and posture, making Sahra an heirloom-style project for intermediate crocheters who enjoy sculptural amigurumi.

PROJECT SNAPSHOT

• Skill Level: Intermediate
• Finished Size: approx. 20 cm (8 in) tall x 22 cm (8.6 in) long
• Construction Style: Seamed, sculpted posture
• Special Technique: Fixed kneeling leg shaping

“The story lives in the knees. Shape them well, and the camel will rest naturally.”

MATERIALS

• Yarn A (Body): Worsted Weight (4) – Sand / Camel Beige (≈180 g)
• Yarn B (Saddle): Worsted Weight (4) – Mustard / Gold
• Yarn C (Hooves & Details): Worsted Weight (4) – Dark Brown
• Yarn D (Accessory Sack): Worsted Weight (4) – Muted Blue
• Yarn E (Trim): Worsted Weight (4) – Cream / Off-white
• Hook: 3.5 mm (tight gauge recommended)
• Safety Eyes: 12 mm
• Fiberfill
• Yarn needle
• Stitch markers
• Thin cardboard (for flat hooves – optional)

ABBREVIATIONS (US TERMS)

• ch – chain
• sc – single crochet
• inc – increase
• dec – decrease
• sl st – slip stitch
• hdc – half double crochet
• FO – fasten off
• (…) – repeat sequence
• – stitch count

HEAD (Make 1 – Yarn A)

Stuff firmly as you go.

R1: 6 sc in MR [6]
R2: inc around [12]
R3: (1 sc, inc) ×6 [18]
R4–6: sc around [18]
R7: (2 sc, inc) ×6 [24]
R8: (3 sc, inc) ×6 [30]
R9: (4 sc, inc) ×6 [36]
R10–15: sc around [36]

Insert safety eyes between R8–9, approx. 14 sts apart.

R16: (4 sc, dec) ×6 [30]
R17: (3 sc, dec) ×6 [24]
R18: (2 sc, dec) ×6 [18]
R19: (1 sc, dec) ×6 [12]
R20: dec around [6]
FO, close opening.

NECK (Make 1 – Yarn A)

Stuff very firmly.

Ch 18, join to form a ring.

R1–14: sc around [18]
R15: (5 sc, inc) ×3 [21]
R16–18: sc around [21]
R19: (6 sc, inc) ×3 [24]
R20: sc around [24]

FO, leave long tail for sewing.

BODY (Make 1 – Yarn A)

R1: 6 sc in MR [6]
R2: inc around [12]
R3: (1 sc, inc) ×6 [18]
R4: (2 sc, inc) ×6 [24]
R5: (3 sc, inc) ×6 [30]
R6: (4 sc, inc) ×6 [36]
R7: (5 sc, inc) ×6 [42]
R8: (6 sc, inc) ×6 [48]
R9–25: sc around [48]

Begin stuffing.

R26: (6 sc, dec) ×6 [42]
R27: (5 sc, dec) ×6 [36]
R28: (4 sc, dec) ×6 [30]
R29: (3 sc, dec) ×6 [24]
R30: (2 sc, dec) ×6 [18]
R31: (1 sc, dec) ×6 [12]
R32: dec around [6]
FO, close.

HUMP (Make 1 – Yarn A)

R1: 6 sc in MR [6]
R2: inc around [12]
R3: (1 sc, inc) ×6 [18]
R4: (2 sc, inc) ×6 [24]
R5–7: sc around [24]
R8: (3 sc, inc) ×6 [30]
R9–11: sc around [30]

Stuff lightly. FO, sew centered on back.

FRONT LEGS – KNEELING (Make 2)

Start with Yarn C.

R1: 6 sc in MR [6]
R2: inc around [12]
Insert cardboard circle if desired.
R3: BLO sc around [12]

Change to Yarn A.

R4–9: sc around [12]
R10–11: 4 hdc, 8 sc [12]
R12: sc around [12]

Flatten opening and sc through both layers [6]
FO.

BACK LEGS – FOLDED (Make 2 – Yarn A)

R1: 6 sc in MR [6]
R2: inc around [12]
R3: (1 sc, inc) ×6 [18]
R4: (2 sc, inc) ×6 [24]
R5–6: sc around [24]
R7: (2 sc, dec) ×6 [18]
R8: (1 sc, dec) ×6 [12]
R9–13: sc around [12]

Change to Yarn C.

R14–15: sc around [12]
R16: dec around [6]
FO.

SADDLE BLANKET (Yarn B)

Ch 21

Row 1: sc across (20), ch 1 turn
Row 2: sc across
Row 3: (sc 3, bobble) ×5
Row 4–14: sc across
Row 15: repeat bobble row
Row 16–17: sc across

FO.
Embroider simple trim with Yarn E if desired.

ACCESSORIES

Bridle (Yarn C)

Ch 30, sl st to form loop.
Ch 18, sl st to opposite side.

Travel Sack (Yarn D)

R1: 6 sc in MR
R2: inc around [12]
R3–5: sc around
R6: (2 sc, dec) ×3 [9]
Stuff lightly, close.

ASSEMBLY

1. Sew hump to body
2. Attach front kneeling legs angled inward
3. Attach folded back legs forward
4. Sew neck to body, then head to neck
5. Place saddle blanket and secure
6. Attach sack and bridle
7. Embroider simple Y-shaped nose/mouth

FINAL NOTES

• For extra realism, lightly brush the body yarn with a slicker brush
• Keep the saddle unbrushed for contrast
• The camel should naturally rest forward and low

COPYRIGHT

This is an original crochet pattern created for amigurumi.badoomobile.net.
You may sell finished camels made from this pattern.
Do not copy, resell, or redistribute this pattern text.

© Amigurumi Badoomobile

🎨 Finished Amigurumi Camel – Color Variations and Accesories

This charming amigurumi Tinker Bell fairy doll features delicate wings, a leafy skirt, a soft color palette, and elegant facial details. Inspired by classic fairy tales, this doll is perfect for collectors, handmade gifts, or decorative nursery pieces.
The pattern includes shaping, embroidery, clothing details, and wing support instructions, making it ideal for intermediate crocheters.

FINISHED SIZE

• Approx. 25–28 cm (10–11 inches) tall
  (Size may vary depending on yarn and tension)

SKILL LEVEL

Intermediate

MATERIALS

• Light skin-tone yarn (cotton or cotton blend)
• Yellow yarn (hair)
• Light blue yarn (top)
• Green yarn (skirt, shoes, wings)
• Black embroidery thread (lashes & brows)
• Safety eyes 10–12 mm
• Polyester fiberfill
• Crochet hook 2.75–3.5 mm
• Yarn needle, stitch marker
• Wing support (optional): thin craft wire, pipe cleaner, or clear plastic sheet

ABBREVIATIONS (US TERMS)

• MR – magic ring
• sc – single crochet
• inc – increase
• dec – decrease
• ch – chain
• sl st – slip stitch
• hdc – half double crochet
• dc – double crochet
• tr – treble crochet
• FO – fasten off
• FLO / BLO – front / back loop only

HEAD (Skin Color)

R1: 6 sc in MR (6)
R2: inc ×6 (12)
R3: (sc, inc) ×6 (18)
R4: (2 sc, inc) ×6 (24)
R5: (3 sc, inc) ×6 (30)
R6: (4 sc, inc) ×6 (36)
R7–13: sc around (36)

Insert safety eyes between R10–11, approx. 7 stitches apart.

R14: (4 sc, dec) ×6 (30)
R15: (3 sc, dec) ×6 (24)
R16: (2 sc, dec) ×6 (18)
Stuff firmly.
R17: (sc, dec) ×6 (12)
R18: dec ×6 (6)

FO and close opening.

HAIR CAP (Yellow)

R1: 6 sc in MR (6)
R2: inc ×6 (12)
R3: (sc, inc) ×6 (18)
R4: (2 sc, inc) ×6 (24)
R5: (3 sc, inc) ×6 (30)
R6–10: sc around (30)

FO and sew securely to head.

HAIR FRINGE

Attach yarn at front hairline.
Ch 4, sl st into next stitch.
Repeat across forehead. FO.

HAIR BUN

R1: 6 sc in MR (6)
R2: inc ×6 (12)
R3: (sc, inc) ×6 (18)
R4–5: sc around (18)
R6: (sc, dec) ×6 (12)

Stuff lightly, FO and sew to top of head.
Add a short blue chain as a decorative hair tie.

BODY (Top → Skirt)

With light blue yarn:

R1: 6 sc in MR (6)
R2: inc ×6 (12)
R3: (sc, inc) ×6 (18)
R4: (2 sc, inc) ×6 (24)
R5–8: sc around (24)

Switch to green yarn:

R9: (3 sc, inc) ×6 (30)
R10: BLO sc around (30)
R11–12: sc around (30)

Stuff firmly. FO.

SKIRT PETALS

(Worked in FLO of Round 10)

For each petal:
Ch 7
Sc in 2nd ch from hook, hdc, dc, dc, hdc, sc
Sl st into next FLO stitch
Repeat around body.

LEGS (Make 2 – Skin Color)

R1: 6 sc in MR (6)
R2: inc ×6 (12)
R3–22: sc around (12)

Stuff lightly. FO and sew under body.

SHOES (Make 2 – Green)

R1: 6 sc in MR (6)
R2: inc ×6 (12)
R3: (sc, inc) ×6 (18)
R4–6: sc around (18)
R7: (sc, dec) ×6 (12)
R8: sc around (12)

Leaf edging: (sc, ch 2, sl st) in each stitch.
FO and sew to legs.

ARMS (Make 2 – Skin Color)

R1: 6 sc in MR (6)
R2: (sc, inc) ×3 (9)
R3–13: sc around (9)

Do not stuff. Flatten and sew to sides.

WINGS (Make 2 – Green)

Ch 11
Sc in 2nd ch, hdc, dc, dc, tr, tr, dc, hdc, sc
Continue on opposite side of chain with same stitch order
Sl st, FO.

Optional: insert wire or plastic for structure.

FACE DETAILS

• Embroider thin curved eyebrows
• Add long upward eyelashes
• Stitch a small nose and gentle smile

ASSEMBLY

1. Sew head to body
2. Attach legs, shoes, and arms
3. Add skirt petals
4. Sew hair bun and fringe
5. Attach wings and shape gently

COPYRIGHT & USE

This is an original crochet pattern created for amigurumi.badoomobile.net.
You may sell finished dolls made from this pattern.
Do not copy, redistribute, or resell this pattern text.

© Amigurumi Badoomobile

🎨 Finished Amigurumi Tinker Bell – Color Variations and Accesories

📏 Finished Size

• Approx. 9–10 cm (3.5–4 inches) wide
  (Size may vary depending on yarn and hook tension)

🧶 Materials

• 100% mercerized cotton yarn (50 g / approx. 120–130 m)
  Examples: Scheepjes Catona, Schachenmayr Catania, or similar
• Crochet hook 3.0 mm
• Stitch marker (optional)
• Scissors
• Yarn needle

🧵 Stitches & Abbreviations (US Terms)

• ch – chain
• sl st – slip stitch
• sc – single crochet
• hdc – half double crochet
• dc – double crochet
• RS – right side
• st(s) – stitch(es)
• inc – increase (2 stitches in one stitch)

🪄 Pattern Notes

• Work in continuous rounds unless stated otherwise.
• Each round is joined with a slip stitch.
• The first chains at the beginning of a round count as stitches.

❤️ Amigurumi Heart Coaster – Crochet Instructions

Round 1

Create a magic ring.
Ch 2 (counts as first dc), work 11 dc into the ring.
Join with sl st to the top of beginning ch.
(12 sts)

Round 2

Ch 2, 2 dc in each of the next 5 sts,
Work 3 dc in the next st (this forms the bottom point),
2 dc in each of the next 5 sts.
Join with sl st.
(24 sts)

Round 3

Ch 2,
(2 dc in next st, 1 dc in next st) repeat 5 times,
1 dc in next st,
3 dc in next st (center bottom),
1 dc in next st,
(1 dc in next st, 2 dc in next st) repeat 5 times.
Join with sl st.
(36 sts)

Round 4

1 sc in next st,
(1 hdc, 1 dc) in next st,
2 dc in each of the next 5 sts,
1 dc in next 2 sts,
1 hdc in next 2 sts,
1 sc in next 4 sts,
1 hdc in next st,
1 dc in next st,
3 dc in next st (bottom curve),
1 dc in next st,
1 hdc in next st,
1 sc in next 4 sts,
1 hdc in next 2 sts,
1 dc in next 2 sts,
2 dc in each of the next 5 sts,
(1 dc, 1 hdc) in next st,
1 sc in next st,
Join with sl st.
(50 sts)

Round 5 (Final Round)

Sl st in first sc,
1 sc in next st,
(1 hdc, 1 dc) in next st,
2 dc in each of the next 7 sts,
1 dc in next 3 sts,
1 hdc in next 2 sts,
1 sc in next 9 sts,
3 sc in next st (sharp bottom tip),
1 sc in next 9 sts,
1 hdc in next 2 sts,
1 dc in next 3 sts,
2 dc in each of the next 7 sts,
(1 dc, 1 hdc) in next st,
1 sc in next st,
Join with sl st.

Fasten off and weave in ends neatly.

✨ Customization Ideas

• Use different colors for rainbow hearts
• Add a hanging loop for ornaments
• Sew two hearts together and lightly stuff for a plush heart
• Attach to keychains, bags, or gift packages

💝 Final Notes

This crochet heart pattern is perfect for using leftover yarn and creating meaningful handmade gifts. Whether you crochet one heart or a whole set, the result is always charming and heartfelt.

Happy crocheting 💕

🎨 Finished Amigurumi Heart Coaster – Color Variations and Accesories

Materials
• Cotton yarn in colors: white, black, light pink, light yellow, light brown, and orange.
• 2.0 mm crochet hook
• 1 safety eye 10mm
• Wire
• Yarn needle
• Scissors
• Silicone
• Stuffing

The size will depend on the tension and material you use.
I crocheted it in “x”faux and used cotton yarn.
This pattern is designed for crocheters with basic knowledge of amigurumi.

Abbreviations
MR: Magic Ring
Ch: Chain
Sc: Single crochet
Inc: Increase
Dec: Decrease
BLO: Back loop only
FLO: Front loop only
Slst: Slip stitch

Amigurumi Crochet Snoopy with Cake for Birthday Party Free Pattern:

Head
COLOR WHITE
Round 1. MR 6sc (6sc)
Round 2. 6inc (12sc)
Round 3. (1sc, 1inc) repeat 6 times (18sc)
Round 4. (1sc, 1inc, 1sc) repeat 6 times (24sc)
Round 5-8. 24sc (3 rounds)
Round 9. 9sc, 6inc, 9sc (30sc)
Round 10. 9sc, (1sc, 1inc) repeat 6 times, 9sc (36sc)
Round 11-15. 36sc (5 rounds
Place the 10 mm safety eye between rounds 3 and 4, it should be centered with the increases we made in rounds 9 and 10.

we begin with the decreases
Round 16. 9sc, (1sc, 1dec) repeat 6 times, 9sc (30sc)
Round 17. (3sc, 1dec) repeat 6 times (24sc)
Start stuffing
Round 18. (2sc, 1dec) repeat 6 times (18sc)
Round 19. (1sc, 1dec) repeat 6 times (12sc)
Round 20. 6dec (6sc)
Close the round with a yarn needle, hide the tail.
Using black yarn, make the eye lines between round 9-10, spaced 6 stitches apart between both eyes.

Body
COLOR WHITE
Round 1. MR 6sc
Round 2. 6inc (12sc)
Round 3. (1sc, 1inc) repeat 6 times (18sc)
Round 4. (2sc, 1inc) repeat 6 times (24sc)
Round 5. (3sc, 1inc) repeat 6 times (30sc)
Round 6-9. 30sc (4 rounds)

we begin with the decreases
Round 10. (3sc, 1dec) repeat 6 times (24sc)
Round 11-13. 24sc (3 rounds)
Round 14. (2sc, 1dec) repeat 6 times (18sc)
Round 15. (1sc, 1dec) repeat 6 times (12sc)
Start stuffing
Cut and leave a long tail to sew the head

Legs x2
COLOR WHITE
Start with 4 ch.
Round 1. Skip 1ch and crochet 2sc, in the last ch make 3sc, turn to the other side and crochet 1sc and 1inc (8sc)
Round 2. 1inc, 2sc, 2inc, 2sc, 1inc (12sc)
Round 3. 1sc, 1inc, 3sc, 1inc, 1sc, 1inc, 3sc, 1inc (16sc)
Round 4-5. 16sc (2 rounds)
we begin with the decreases
Round 6. 2dec, 8sc, 2dec (12sc)
Stuff lightly
Round 7. (2sc, 1dec) repeat 3 times (9sc)
Round 8-11. 9sc (4 rounds)
Do not close the round, cut and leave a long tail to sew to the body.

Arms x2
COLOR WHITE
Round 1. MR 6sc
Round 2. 1inc, 5sc (7sc)
Round 3-11. 7sc (8 rounds)
Fold in half and close with 3sc, leave a long tail to sew to the body
Do not stuff. Flatten slightly before sewing.

Ears x2
COLOR BLACK
Round 1. MR 6sc
Round 2. 6inc (12sc)
Round 3. (3sc, 1inc) repeat 3 times (15sc)
Round 4. 15sc
Round 5. (3sc, 1dec) repeat 3 times (12sc)
Round 6-7. 12sc (2 rounds)
Round 8. (2sc, 1dec) repeat 3 times (9sc)
Round 9. 9sc
Round 10. (1sc, 1dec) repeat 3 times (6sc)
Close with a yarn needle and leave a long tail
Do not stuff
Sew the ears between rounds 13-14.

Assembly
Sew the arms between rounds 14-15 of the body slightly diagonally, NOT STRAIGHT (this will make it easier to place the  cake later).
Sew the legs between rounds 2-4 of the body (separated by 1-2 sc)
Sew the head to the body aligning the nose with the center of the body.
Tip: Before sewing, pin everything in place and check from the front and side to ensure it’s straight.

Party Hat
COLOR PINK AND YELLOW
Start with pink
Round 1: MR 4sc
Round 2: (1sc, 1inc) repeat 2 times (6sc)
Switch to yellow
Round 3. 6sc
Round 4. (1sc, 1inc) repeat 3 times (9sc)
Switch to pink
Round 5. 9sc
Round 6. (2sc, 1inc) repeat 3 times (12sc)
Switch to yellow
Round 7. 12sc
Round 8. (3sc, 1inc) repeat 3 times (15sc)
Switch to pink
Round 9. 15sc
Round 10. (4sc, 1inc) repeat 3 times (18sc)
Switch to yellow
Round 11. FLO: Take 1 sc through the front loop only and chain 3, make a slip stitch in the next stitch (repeat this sequence all around the round)
No stuffing needed

After finishing round 11:
If you want to sew the hat: leave a long tail.
If you want to glue it with silicone or glue: it is not necessary to leave a long tail.
Tip: first secure the hat with pins before gluing or sewing it to the head.
Place the hat in the center of the head between the 2 ears.

Cupcake
COLOR BROWN
Round 1: MR 6sc
Round 2: 6inc (12sc)
Round 3: (1sc, 1inc) repeat 6 times (18sc)
Round 4: (2sc, 1inc) repeat 6 times (24sc)
Round 5: BLO 24sc
Round 6-9: 24sc (4 rounds)
Round 10: BLO 24sc

we begin with the decreases
Round 11: (2sc, 1dec) repeat 6 times (18sc)
Round 12: (1sc, 1dec) repeat 6 times (12sc)
Start stuffing
Round 13: 6dec (6sc)
Close the round with a  yarn needle, hide the tail.

COLOR WHITE
In round 5 (in the front loop) make 1 chain in each sc.
Close with slst and hide the tail.

COLOR PINK
Round 1: MR 6sc
Round 2: 6inc (12sc)
Round 3: (1sc, 1inc) (18sc)
Round 4: (2sc, 1inc) (24sc)
Round 5: In the first sc: chain 3 and go back with 2sc; skip 1 sc;
in the next sc: chain 5 and go back with 4sc; skip 1 sc;
Repeat the sequence until the round is complete.
Make a slst and cut.
Glue on top of the cupcake with hot silicone or glue.

Cupcake Candle
WIRE
Cut approximately 8cm of wire.

Fold the wire in half and insert it into the center of the cupcake, leaving the tip visible at the top.

COLOR BROWN
With hot silicone, wrap brown yarn around the bottom part of the wire.
COLOR ORANGE
With hot silicone and orange yarn, wrap several turns around the tip of the wire to create the wick effect.

Cupcake Assembly
COLOR WHITE
With white thread, sew the cupcake to Snoopy’s arms.

Optional: you can also glue the cupcake to the arms with hot silicone or craft glue.

Smile
COLOR BLACK
Between rounds 8 and 9, embroider Snoopy’s smile.
Leave a 3sc gap from the start of the eye.

Congratulations, you’ve finished your birthday Snoopy!
More Amigurumi Snoopy Ideas:

Today we share Amigurumi Labubu Free Crochet Pattern for you. As you know, we share a new free amigurumi pattern every day. The main crochets are gazelle, amigurumi bear, pola, crochet panda, penguin, giraffe, llama, pig, bunny, clown, lamb, bee, crochet unicorn, amigurumi doll, fox, penguin, dinosaur, crochet elephant, hippo, monkey, crochet cat, crochet dog and more…
Today’s daily new amigurumi free crochet pattern is Amigurumi Labubu.
I want to give you some information about this amigurumi free pattern; Crochet Labubu.

Original Free Crochet Pattern (Premium Design)

This adorable Labubu-style bunny amigurumi features a soft fuzzy hood, expressive face shaping, and a compact doll body.
Perfect as a keychain, collectible plush, or handmade gift.

FINISHED SIZE

• Approx. 11 cm (4.3 in) without ears
• Approx. 14 cm (5.5 in) with ears

(Size may vary depending on yarn and tension.)

MATERIALS

• Fuzzy yarn (nylon / eyelash type) – hood & body
• Semi-cotton yarn (sport weight) – face & limbs
• Crochet hook 2.25 mm (fuzzy yarn)
• Crochet hook 2.0 mm (cotton yarn)
• Safety eyes 9–10 mm
• Black embroidery thread (mouth)
• White embroidery thread (teeth & eye details)
• Strong beige thread (face shaping)
• Fiberfill stuffing
• Stitch marker, scissors, sewing needle

ABBREVIATIONS (US)

• mc – magic circle
• ch – chain
• sc – single crochet
• hdc – half double crochet
• sl st – slip stitch
• inc – 2 sc in one stitch
• dec – sc2tog
• bobble – 3 unfinished dc worked together
• ( ) – stitch count

Work in continuous rounds unless stated otherwise.

HEAD

(Cotton yarn, 2.0 mm hook)

R1: 6 sc in mc (6)
R2: inc ×6 (12)
R3: (inc, 1 sc) ×6 (18)
R4: (inc, 2 sc) ×6 (24)
R5: (inc, 3 sc) ×6 (30)
R6: (inc, 4 sc) ×6 (36)
R7: (inc, 5 sc) ×6 (42)
R8–14: 42 sc (7 rounds)
R15: (dec, 5 sc) ×6 (36)
R16: (dec, 4 sc) ×6 (30)
Insert safety eyes between R9–R10.
Stuff firmly.
R17: (dec, 3 sc) ×6 (24)
R18: (dec, 2 sc) ×6 (18)
R19: dec ×9 (9)

Fasten off and close opening.

FUZZY HOOD

(Fuzzy yarn, 2.25 mm hook)

R1: 6 sc in mc (6)
R2: inc ×6 (12)
R3: (inc, 1 sc) ×6 (18)
R4: (inc, 2 sc) ×6 (24)
R5: (inc, 3 sc) ×6 (30)
R6: (inc, 4 sc) ×6 (36)
R7: (inc, 5 sc) ×6 (42)
R8–12: 42 sc (5 rounds)

Place hood over head and align stitches.

R13: (dec, 5 sc) ×6 (36)

Fasten off.

FACE SHAPING

Using strong beige thread and a long needle:

• Enter from bottom of head
• Pass thread around each eye vertically
• Pull gently to create slight indentation
• Secure and hide thread inside

EARS (MAKE 2)

(Fuzzy yarn)

R1: 6 sc in mc (6)
R2: (1 sc, inc) ×3 (9)
R3: (2 sc, inc) ×3 (12)
R4: (3 sc, inc) ×3 (15)
R5–9: 15 sc (5 rounds)

Flatten slightly.
Fasten off, leave tail for sewing.

INNER EAR (MAKE 2)

(Cotton yarn)

Ch 5
R1: From 2nd ch, 4 sc
R2: 1 sc, (hdc, dc, hdc) in next st, 2 sc

Fasten off.
Sew inside ear and decorate with slip stitches if desired.

ARMS (MAKE 2)

(Cotton → Fuzzy)

R1: 5 sc in mc (5)
R2: inc ×5 (10)
R3: (1 sc, bobble) ×3, 4 sc (10)

Switch to fuzzy yarn.

R4–9: 10 sc (6 rounds)
Lightly stuff.
Fold top flat and sc through both layers.

Fasten off.

LEGS & BODY (ONE PIECE)

Legs (make 2)

(Cotton yarn)
R1: 6 sc in mc (6)
R2: inc ×6 (12)
R3: 4 sc, (bobble, 1 sc) ×2, 4 sc

Switch to fuzzy yarn.

R4: (3 sc, inc) ×3 (15)
R5–7: 15 sc (3 rounds)

Finish first leg.
Do NOT fasten off second leg.

Ch 2, join first leg.

Body

R1: 15 sc (leg 1), 2 sc in ch, 15 sc (leg 2), 2 sc in ch (34)
R2–8: 34 sc (7 rounds)
R9: (6 sc, dec) ×4 (30)
R10: (3 sc, dec) ×6 (24)
R11: (2 sc, dec) ×6 (18)

Stuff body firmly.
Fasten off, leave tail.

FACE DETAILS

• Embroider mouth with black thread
• Add small white teeth stitches
• Embroider eyebrows with simple or rococo stitch
• Optional: blush cheeks

ASSEMBLY

1. Sew head to body
2. Attach arms to upper body
3. Sew ears onto hood
4. Adjust hood position
5. Shape gently

Optional: add keychain ring.

COPYRIGHT & USE

This is an original crochet pattern created for amigurumi.badoomobile.net.
You may sell finished items made from this pattern.
Do not copy, resell, or redistribute the pattern text.

© Amigurumi Badoomobile

🎨 Finished AMIGURUMI LABUBU KEYCHAIN – Color Variations and Accesories

Original Crochet Pattern – Free

This sweet spring bunny amigurumi is designed with soft proportions, a floral dress, and delicate details.
Perfect for baby gifts, nursery decor, spring collections, and handmade toys.

FINISHED SIZE

Approx. 16–18 cm (6–7 inches) tall
(Size may vary depending on yarn and hook.)

MATERIALS

• Sport / DK cotton yarn
  • White (body)
  • Mint (dress)
  • Blush pink (skirt & cheeks)
  • Light blue or mint (flower)
• Crochet hook: 2.5 mm
• Black embroidery floss
• Pearl beads (optional)
• Fiberfill stuffing
• Sewing needle & scissors

ABBREVIATIONS (US TERMS)

• mc – magic circle
• ch – chain
• sc – single crochet
• dc – double crochet
• sl st – slip stitch
• inc – 2 sc in same stitch
• dec – single crochet 2 stitches together
• BLO – back loop only
• FLO – front loop only
• R – round
• ( ) – stitch count at end of round

Work in continuous rounds unless stated otherwise.

EARS (MAKE 2)

R1: 6 sc in mc (6)
R2: inc in each st (12)
R3–7: 12 sc (5 rounds)
R8: dec, 4 sc ×2 (10)
R9–11: 10 sc (3 rounds)

Lightly flatten, do not stuff.
Fasten off, leave long tail for sewing.

ARMS (MAKE 2)

R1: 6 sc in mc (6)
R2: 6 sc
R3: inc, 2 sc ×2 (8)
R4–7: 8 sc (4 rounds)

Lightly stuff bottom part only.
Fasten off, leave tail.

LEGS (MAKE 2)

R1: 6 sc in mc (6)
R2: 6 sc
R3: inc, 2 sc ×2 (8)
R4: 8 sc
R5: inc, 3 sc ×2 (10)
R6–7: 10 sc (2 rounds)

Stuff firmly.
Fasten off first leg only.

BODY

From second leg: ch 2, join to first leg.

R1: 10 sc on first leg, 2 sc in ch, 10 sc on second leg, 2 sc in ch (24)
R2–5: 24 sc (4 rounds)

Change to dress color.

R6: BLO 24 sc
R7: BLO 24 sc
R8–10: 24 sc (3 rounds)
R11: dec, 4 sc ×4 (20)
R12: 20 sc
R13: dec, 8 sc ×2 (18)
R14: 18 sc

Stuff body.
Fasten off, leave tail for sewing.

HEAD

R1: 6 sc in mc (6)
R2: inc ×6 (12)
R3: inc, 1 sc ×6 (18)
R4: inc, 2 sc ×6 (24)
R5: inc, 3 sc ×6 (30)
R6: inc, 4 sc ×6 (36)
R7: inc, 5 sc ×6 (42)
R8–15: 42 sc (8 rounds)
R16: dec, 5 sc ×6 (36)
R17: dec, 4 sc ×6 (30)
R18: dec, 3 sc ×6 (24)
R19: dec, 2 sc ×6 (18)

Insert stuffing.
Fasten off and close opening.

MUZZLE

R1: 6 sc in mc (6)
R2: inc ×6 (12)
R3: inc, 1 sc ×6 (18)

Fasten off, lightly stuff.
Sew to lower center of head.

EMBROIDERY

• Embroider closed eyes with black floss
• Add nose and mouth
• Optional: blush cheeks with pink yarn

SKIRT

Attach mint yarn to FLO of R6 of body:
R1: 3 dc in each stitch around
Fasten off.

Attach pink yarn to FLO of R7:
R1: 3 dc in each stitch around
Fasten off.

FLOWERS

Small Flower (Pink)

R1: 6 sc in mc, sl st
R2: (2 ch, 2 dc, 2 ch, sl st) ×6
Fasten off.

Small Flower (Mint)

R1: 5 sc in mc, sl st
R2: (2 ch, 2 dc, 2 ch, sl st) ×5
Fasten off.

Attach pearl bead if desired.

ASSEMBLY

1. Sew head to body
2. Attach arms at body R12
3. Sew ears on top of head
4. Attach flowers to dress and head
5. Shape gently

COPYRIGHT & USE

This pattern is an original design created for amigurumi.badoomobile.net.
You may sell finished items made from this pattern.
Do not copy, translate, or redistribute the pattern text.

© Amigurumi Badoomobile

Finished Amigurumi Bunny – Color Variations

Sewn panel construction, smooth curves, gift-ready finish

This whale is worked as two curved panels (Top + Bottom) in rows, then seamed and stuffed. The shaping creates a defined “mouth curve” and a soft, chubby body.

FINISHED SIZE

Approx. 38–42 cm (15–16.5 in) long with worsted yarn and 4.0 mm hook.
(Adjust by changing yarn/hook.)

MATERIALS

• Worsted weight yarn (Category 4)
  • Color A: Top (Denim/Blue)
  • Color B: Bottom (Light gray/white)
• Hook: 4.0 mm (G/6) (use 3.75 mm if you want tighter fabric)
• Safety eyes: 9–10 mm
• Stitch markers
• Fiberfill stuffing
• Tapestry needle, scissors

ABBREVIATIONS (US)

• ch – chain
• sc – single crochet
• hdc – half double crochet
• dc – double crochet
• sl st – slip stitch
• inc – 2 sc in same stitch
• dec – sc2tog (single crochet decrease)
• st(s) – stitch(es)
• ( ) – stitch count end of row
• Turn at end of each row.

NOTES (IMPORTANT)

• Work tight to prevent stuffing showing.
• The panels look “flat” until seamed—this is normal.
• Leave long yarn tails for seaming.
• For the smoothest seam, use mattress stitch on the body.

PART 1 — WHALE TOP (Color A)

Ch 15

Row 1: sc in 2nd ch from hook and across (14)
Row 2: ch 1, turn, sc across (14)
Row 3: ch 1, turn, inc, 12 sc, inc (16)
Row 4: ch 1, turn, sc across (16)
Row 5: ch 1, turn, inc, 14 sc, inc (18)
Row 6: ch 1, turn, sc across (18)
Row 7: ch 1, turn, inc, 16 sc, inc (20)
Row 8: ch 1, turn, sc across (20)
Row 9: ch 1, turn, 6 sc, inc, 6 sc, inc, 6 sc (22)
Row 10: ch 1, turn, sc across (22)
Row 11: ch 1, turn, inc, 20 sc, inc (24)
Row 12: ch 1, turn, sc across (24)

Begin gentle “mouth ridge” shaping

Row 13: ch 1, turn, 2 sc, dec, 16 sc, dec, 2 sc (22)
Row 14: ch 1, turn, sc across (22)
Row 15: ch 1, turn, 2 sc, dec, 14 sc, dec, 2 sc (20)
Row 16: ch 1, turn, sc across (20)
Row 17: ch 1, turn, 1 sc, dec, 14 sc, dec, 1 sc (18)
Row 18: ch 1, turn, sc across (18)

Back area + dorsal fin base

Row 19: ch 1, turn, inc, 16 sc, inc (20)
Row 20: ch 1, turn, sc across (20)
Row 21: ch 1, turn, 7 sc, inc, 4 sc, inc, 7 sc (22)
Row 22: ch 1, turn, sc across (22)
Row 23: ch 1, turn, 8 sc, inc, 4 sc, inc, 8 sc (24)
Row 24: ch 1, turn, sc across (24)

Dorsal fin “pinch” (small raised fin)

Row 25: ch 1, turn, 10 sc, dec, 2 sc, dec, 10 sc (22)
Row 26: ch 1, turn, sc across (22)
Row 27: ch 1, turn, 9 sc, dec, 2 sc, dec, 9 sc (20)
Row 28: ch 1, turn, sc across (20)

Taper toward tail

Row 29: ch 1, turn, 2 sc, dec, 12 sc, dec, 2 sc (18)
Row 30: ch 1, turn, sc across (18)
Row 31: ch 1, turn, 2 sc, dec, 10 sc, dec, 2 sc (16)
Row 32: ch 1, turn, sc across (16)
Row 33: ch 1, turn, 1 sc, dec, 10 sc, dec, 1 sc (14)
Row 34: ch 1, turn, sc across (14)

Tail flukes shaping

Row 35: ch 1, turn, inc, 12 sc, inc (16)
Row 36: ch 1, turn, inc, 14 sc, inc (18)
Row 37: ch 1, turn, 2 sc, inc, 12 sc, inc, 2 sc (20)
Row 38: ch 1, turn, 8 sc, sl st 4, 8 sc (20) (creates center dip)
Row 39: ch 1, turn, 2 sc, inc, 12 sc, inc, 2 sc (22)
Row 40: ch 1, turn, 9 sc, sl st 4, 9 sc (22)

Fasten off, leave a long tail.

PART 2 — WHALE BOTTOM (Color B)

Ch 17

Row 1: sc in 2nd ch from hook and across (16)
Row 2: ch 1, turn, sc across (16)

Create rounded “mouth”/chin curve with taller stitches

Row 3: ch 1, turn, 5 sc, 2 hdc, 2 dc, 2 hdc, 5 sc (16)
Row 4: ch 1, turn, inc, 14 sc, inc (18)
Row 5: ch 1, turn, 6 sc, inc, 4 sc, inc, 6 sc (20)
Row 6: ch 1, turn, sc across (20)
Row 7: ch 1, turn, inc, 18 sc, inc (22)
Row 8: ch 1, turn, sc across (22)
Row 9: ch 1, turn, 8 sc, inc, 4 sc, inc, 8 sc (24)
Row 10: ch 1, turn, sc across (24)

Belly fullness

Row 11: ch 1, turn, inc, 22 sc, inc (26)
Row 12: ch 1, turn, sc across (26)
Row 13: ch 1, turn, 10 sc, inc, 4 sc, inc, 10 sc (28)
Row 14: ch 1, turn, sc across (28)
Row 15: ch 1, turn, inc, 26 sc, inc (30)
Row 16: ch 1, turn, sc across (30)

Start taper

Row 17: ch 1, turn, 2 sc, dec, 24 sc, dec, 2 sc (28)
Row 18: ch 1, turn, sc across (28)
Row 19: ch 1, turn, 2 sc, dec, 22 sc, dec, 2 sc (26)
Row 20: ch 1, turn, sc across (26)
Row 21: ch 1, turn, 1 sc, dec, 22 sc, dec, 1 sc (24)
Row 22: ch 1, turn, sc across (24)
Row 23: ch 1, turn, 2 sc, dec, 18 sc, dec, 2 sc (22)
Row 24: ch 1, turn, sc across (22)
Row 25: ch 1, turn, 2 sc, dec, 16 sc, dec, 2 sc (20)
Row 26: ch 1, turn, sc across (20)
Row 27: ch 1, turn, 1 sc, dec, 16 sc, dec, 1 sc (18)
Row 28: ch 1, turn, sc across (18)

Tail flukes (match top)

Row 29: ch 1, turn, inc, 16 sc, inc (20)
Row 30: ch 1, turn, 2 sc, inc, 14 sc, inc, 2 sc (22)
Row 31: ch 1, turn, 9 sc, sl st 4, 9 sc (22)
Row 32: ch 1, turn, 2 sc, inc, 14 sc, inc, 2 sc (24)
Row 33: ch 1, turn, 10 sc, sl st 4, 10 sc (24)

Fasten off, leave a long tail.

PART 3 — SIDE FINS (Make 2, mirror pair)

Fin A (Color A) + Fin B (Color B) then join.

Make 2 fins in Color A and 2 fins in Color B (4 pieces total)

Ch 7

Row 1: sc in 2nd ch from hook and across (6)
Row 2: ch 1, turn, sc across (6)
Row 3: ch 1, turn, inc, 4 sc, inc (8)
Row 4: ch 1, turn, sc across (8)
Row 5: ch 1, turn, 1 sc, dec, 2 sc, dec, 1 sc (6)
Row 6: ch 1, turn, sc across (6)
Row 7: ch 1, turn, dec, 2 sc, dec (4)
Row 8: ch 1, turn, sc across (4)
Row 9: ch 1, turn, dec, dec (2)

Fasten off.

Join fins

Place one Color A fin + one Color B fin together (right sides out).
Attach yarn and sl st evenly around the edge.
Do NOT stuff fins.

Repeat for second fin.

PART 4 — ASSEMBLY

1. Nose seam (front shaping):
   Fold the first 3–4 rows of each panel slightly inward and stitch a short seam at the very front to create a rounded snout.
2. Place eyes:
   On the Top panel, place safety eyes about Rows 6–7, roughly 3–4 stitches in from each side. (Adjust to your taste.)
3. Join tail first:
   With panels aligned, sl st around the tail flukes area to lock the shape (optional but tidy).
4. Sew body (recommended):
   Use mattress stitch from tail forward, leaving an opening on the belly side for stuffing.
5. Insert fins while seaming:
   At about the mid-body (around the widest belly rows), sandwich the fin between panels and stitch through fin edge as you seam.
6. Stuff firmly:
   Overstuffing slightly helps the whale look “puffy” and defined. Do not stuff fins/tail.
7. Close seam and shape:
   Finish seaming, weave ends, gently squish and shape the mouth curve.

OPTIONAL DETAILS (Premium look)

• Add a tiny embroidered mouth line on the bottom panel front (1–1.5 cm).
• Steam-block panels lightly before assembly for cleaner curves.
• Use a smaller hook (3.5 mm) for a tighter, more “store-bought” finish.

PERMISSIONS

You may sell finished whales made from this pattern.
Do not redistribute, translate, or sell the pattern text itself.

© Badoomobile Amigurumi – Original Pattern

Finished Amigurumi Whale – Color Variations

This adorable plush teddy bear is designed with soft proportions, a round head, and a cozy sweater detail.
The pattern is written clearly for confident beginners to intermediate crocheters and results in a cuddly, gift-ready toy.

FINISHED SIZE

Approx. 28–30 cm (11–12 inches) tall
(Size may vary depending on yarn, hook, and tension.)

MATERIALS

• Super bulky / plush yarn
  (e.g. Himalaya Dolphin Baby, YarnArt Dolce, Alize Softy)
• Main color: Bear body
• Secondary color: Sweater
• Crochet hook: 3.5 mm – 4.0 mm
• Safety eyes (10–12 mm)
• Safety nose
• Fiberfill stuffing
• Tapestry needle
• Scissors
• Thin matching yarn/thread for facial embroidery

ABBREVIATIONS (US TERMS)

• ch – chain
• sc – single crochet
• inc – increase (2 sc in same stitch)
• dec – decrease (single crochet 2 stitches together)
• st – stitch
• R – round
• ( ) – stitch count at end of round
• * * – repeat instructions between asterisks

Work in continuous spiral rounds unless stated otherwise.

HEAD

R1: 6 sc into magic ring (6)
R2: inc in each st (12)
R3: 1 sc, inc ×6 (18)
R4: 2 sc, inc ×6 (24)
R5: 3 sc, inc ×6 (30)
R6: 4 sc, inc ×6 (36)
R7: 5 sc, inc ×6 (42)
R8–R12: 42 sc (5 rounds)

Insert safety eyes between R9–R10, about 6–7 sts apart.

R13: 5 sc, dec ×6 (36)
R14: 4 sc, dec ×6 (30)
R15: 3 sc, dec ×6 (24)
R16: 2 sc, dec ×6 (18)
R17: 4 sc, dec ×3 (15)

Stuff firmly.
Fasten off, close opening.

MUZZLE

R1: 6 sc into magic ring (6)
R2: inc in each st (12)
R3: 1 sc, inc ×6 (18)
R4: 18 sc

Fasten off, lightly stuff.
Attach safety nose and embroider mouth line before sewing to head.

EARS (MAKE 2)

R1: 6 sc into magic ring (6)
R2: inc in each st (12)
R3: 1 sc, inc ×3, 6 sc (15)

Flatten slightly, do not stuff.
Fasten off leaving long tail for sewing.

BODY

R1: 6 sc into magic ring (6)
R2: inc in each st (12)
R3: 1 sc, inc ×6 (18)
R4: 2 sc, inc ×6 (24)
R5: 3 sc, inc ×6 (30)
R6: 4 sc, inc ×6 (36)
R7: 36 sc

Change to sweater color.

R8–R9: 36 sc
R10: 4 sc, dec ×6 (30)
R11–R12: 30 sc
R13: 3 sc, dec ×6 (24)
R14–R15: 24 sc
R16: 2 sc, dec ×6 (18)
R17–R18: 18 sc
R19: 4 sc, dec ×3 (15)

Stuff firmly.
Fasten off and close opening.

ARMS (MAKE 2)

R1: 6 sc into magic ring (6)
R2: inc in each st (12)
R3: 1 sc, inc ×6 (18)
R4: 18 sc
R5: 1 sc, dec ×6 (12)
R6: 12 sc

Change to sweater color.

R7–R9: 12 sc
R10: 10 sc, dec (11)
R11: 11 sc
R12: 9 sc, dec (10)
R13: 10 sc

Lightly stuff lower part only.
Flatten top and crochet 5 sc through both layers to close.
Fasten off.

LEGS (MAKE 2)

Ch 5.
Work in an oval around the chain.

R1: From 2nd ch from hook: inc, 2 sc, 3 sc in last ch; on opposite side: 3 sc (10)
R2: inc, inc, inc, 2 sc ×2 (16)
R3: inc, 1 sc ×3, 2 sc, inc, 1 sc ×3, 2 sc (22)
R4–R5: 22 sc
R6: 3 dec, 2 sc, dec, 1 sc ×3, 5 sc (16)
R7: 2 dec, 2 sc, dec, 1 sc ×2, 4 sc (12)
R8–R12: 12 sc
R13: dec, 10 sc (11)
R14: 11 sc
R15: dec, 9 sc (9)

Stuff firmly.
Flatten top and close with 5 sc through both layers.
Fasten off.

ASSEMBLY

1. Sew muzzle to lower center of head.
2. Attach ears slightly angled on top sides of head.
3. Sew head to body securely.
4. Attach arms to sides of sweater area.
5. Sew legs evenly at bottom of body.
6. Embroider gentle eyebrow lines if desired.

COPYRIGHT & USE

This pattern is an original design.
You may sell finished toys made from this pattern.
Do not copy, translate, or redistribute the pattern itself.

© Amigurumi Badoomobile

🎨 Finished AMIGURUMI PLUSH TEDDY BEAR– Color Variations and Accesories