📏 Finished Size

• Approx. 9–10 cm (3.5–4 inches) wide
  (Size may vary depending on yarn and hook tension)

🧶 Materials

• 100% mercerized cotton yarn (50 g / approx. 120–130 m)
  Examples: Scheepjes Catona, Schachenmayr Catania, or similar
• Crochet hook 3.0 mm
• Stitch marker (optional)
• Scissors
• Yarn needle

🧵 Stitches & Abbreviations (US Terms)

• ch – chain
• sl st – slip stitch
• sc – single crochet
• hdc – half double crochet
• dc – double crochet
• RS – right side
• st(s) – stitch(es)
• inc – increase (2 stitches in one stitch)

🪄 Pattern Notes

• Work in continuous rounds unless stated otherwise.
• Each round is joined with a slip stitch.
• The first chains at the beginning of a round count as stitches.

❤️ Amigurumi Heart Coaster – Crochet Instructions

Round 1

Create a magic ring.
Ch 2 (counts as first dc), work 11 dc into the ring.
Join with sl st to the top of beginning ch.
(12 sts)

Round 2

Ch 2, 2 dc in each of the next 5 sts,
Work 3 dc in the next st (this forms the bottom point),
2 dc in each of the next 5 sts.
Join with sl st.
(24 sts)

Round 3

Ch 2,
(2 dc in next st, 1 dc in next st) repeat 5 times,
1 dc in next st,
3 dc in next st (center bottom),
1 dc in next st,
(1 dc in next st, 2 dc in next st) repeat 5 times.
Join with sl st.
(36 sts)

Round 4

1 sc in next st,
(1 hdc, 1 dc) in next st,
2 dc in each of the next 5 sts,
1 dc in next 2 sts,
1 hdc in next 2 sts,
1 sc in next 4 sts,
1 hdc in next st,
1 dc in next st,
3 dc in next st (bottom curve),
1 dc in next st,
1 hdc in next st,
1 sc in next 4 sts,
1 hdc in next 2 sts,
1 dc in next 2 sts,
2 dc in each of the next 5 sts,
(1 dc, 1 hdc) in next st,
1 sc in next st,
Join with sl st.
(50 sts)

Round 5 (Final Round)

Sl st in first sc,
1 sc in next st,
(1 hdc, 1 dc) in next st,
2 dc in each of the next 7 sts,
1 dc in next 3 sts,
1 hdc in next 2 sts,
1 sc in next 9 sts,
3 sc in next st (sharp bottom tip),
1 sc in next 9 sts,
1 hdc in next 2 sts,
1 dc in next 3 sts,
2 dc in each of the next 7 sts,
(1 dc, 1 hdc) in next st,
1 sc in next st,
Join with sl st.

Fasten off and weave in ends neatly.

✨ Customization Ideas

• Use different colors for rainbow hearts
• Add a hanging loop for ornaments
• Sew two hearts together and lightly stuff for a plush heart
• Attach to keychains, bags, or gift packages

💝 Final Notes

This crochet heart pattern is perfect for using leftover yarn and creating meaningful handmade gifts. Whether you crochet one heart or a whole set, the result is always charming and heartfelt.

Happy crocheting 💕

🎨 Finished Amigurumi Heart Coaster – Color Variations and Accesories

Materials
• Cotton yarn in colors: white, black, light pink, light yellow, light brown, and orange.
• 2.0 mm crochet hook
• 1 safety eye 10mm
• Wire
• Yarn needle
• Scissors
• Silicone
• Stuffing

The size will depend on the tension and material you use.
I crocheted it in “x”faux and used cotton yarn.
This pattern is designed for crocheters with basic knowledge of amigurumi.

Abbreviations
MR: Magic Ring
Ch: Chain
Sc: Single crochet
Inc: Increase
Dec: Decrease
BLO: Back loop only
FLO: Front loop only
Slst: Slip stitch

Amigurumi Crochet Snoopy with Cake for Birthday Party Free Pattern:

Head
COLOR WHITE
Round 1. MR 6sc (6sc)
Round 2. 6inc (12sc)
Round 3. (1sc, 1inc) repeat 6 times (18sc)
Round 4. (1sc, 1inc, 1sc) repeat 6 times (24sc)
Round 5-8. 24sc (3 rounds)
Round 9. 9sc, 6inc, 9sc (30sc)
Round 10. 9sc, (1sc, 1inc) repeat 6 times, 9sc (36sc)
Round 11-15. 36sc (5 rounds
Place the 10 mm safety eye between rounds 3 and 4, it should be centered with the increases we made in rounds 9 and 10.

we begin with the decreases
Round 16. 9sc, (1sc, 1dec) repeat 6 times, 9sc (30sc)
Round 17. (3sc, 1dec) repeat 6 times (24sc)
Start stuffing
Round 18. (2sc, 1dec) repeat 6 times (18sc)
Round 19. (1sc, 1dec) repeat 6 times (12sc)
Round 20. 6dec (6sc)
Close the round with a yarn needle, hide the tail.
Using black yarn, make the eye lines between round 9-10, spaced 6 stitches apart between both eyes.

Body
COLOR WHITE
Round 1. MR 6sc
Round 2. 6inc (12sc)
Round 3. (1sc, 1inc) repeat 6 times (18sc)
Round 4. (2sc, 1inc) repeat 6 times (24sc)
Round 5. (3sc, 1inc) repeat 6 times (30sc)
Round 6-9. 30sc (4 rounds)

we begin with the decreases
Round 10. (3sc, 1dec) repeat 6 times (24sc)
Round 11-13. 24sc (3 rounds)
Round 14. (2sc, 1dec) repeat 6 times (18sc)
Round 15. (1sc, 1dec) repeat 6 times (12sc)
Start stuffing
Cut and leave a long tail to sew the head

Legs x2
COLOR WHITE
Start with 4 ch.
Round 1. Skip 1ch and crochet 2sc, in the last ch make 3sc, turn to the other side and crochet 1sc and 1inc (8sc)
Round 2. 1inc, 2sc, 2inc, 2sc, 1inc (12sc)
Round 3. 1sc, 1inc, 3sc, 1inc, 1sc, 1inc, 3sc, 1inc (16sc)
Round 4-5. 16sc (2 rounds)
we begin with the decreases
Round 6. 2dec, 8sc, 2dec (12sc)
Stuff lightly
Round 7. (2sc, 1dec) repeat 3 times (9sc)
Round 8-11. 9sc (4 rounds)
Do not close the round, cut and leave a long tail to sew to the body.

Arms x2
COLOR WHITE
Round 1. MR 6sc
Round 2. 1inc, 5sc (7sc)
Round 3-11. 7sc (8 rounds)
Fold in half and close with 3sc, leave a long tail to sew to the body
Do not stuff. Flatten slightly before sewing.

Ears x2
COLOR BLACK
Round 1. MR 6sc
Round 2. 6inc (12sc)
Round 3. (3sc, 1inc) repeat 3 times (15sc)
Round 4. 15sc
Round 5. (3sc, 1dec) repeat 3 times (12sc)
Round 6-7. 12sc (2 rounds)
Round 8. (2sc, 1dec) repeat 3 times (9sc)
Round 9. 9sc
Round 10. (1sc, 1dec) repeat 3 times (6sc)
Close with a yarn needle and leave a long tail
Do not stuff
Sew the ears between rounds 13-14.

Assembly
Sew the arms between rounds 14-15 of the body slightly diagonally, NOT STRAIGHT (this will make it easier to place the  cake later).
Sew the legs between rounds 2-4 of the body (separated by 1-2 sc)
Sew the head to the body aligning the nose with the center of the body.
Tip: Before sewing, pin everything in place and check from the front and side to ensure it’s straight.

Party Hat
COLOR PINK AND YELLOW
Start with pink
Round 1: MR 4sc
Round 2: (1sc, 1inc) repeat 2 times (6sc)
Switch to yellow
Round 3. 6sc
Round 4. (1sc, 1inc) repeat 3 times (9sc)
Switch to pink
Round 5. 9sc
Round 6. (2sc, 1inc) repeat 3 times (12sc)
Switch to yellow
Round 7. 12sc
Round 8. (3sc, 1inc) repeat 3 times (15sc)
Switch to pink
Round 9. 15sc
Round 10. (4sc, 1inc) repeat 3 times (18sc)
Switch to yellow
Round 11. FLO: Take 1 sc through the front loop only and chain 3, make a slip stitch in the next stitch (repeat this sequence all around the round)
No stuffing needed

After finishing round 11:
If you want to sew the hat: leave a long tail.
If you want to glue it with silicone or glue: it is not necessary to leave a long tail.
Tip: first secure the hat with pins before gluing or sewing it to the head.
Place the hat in the center of the head between the 2 ears.

Cupcake
COLOR BROWN
Round 1: MR 6sc
Round 2: 6inc (12sc)
Round 3: (1sc, 1inc) repeat 6 times (18sc)
Round 4: (2sc, 1inc) repeat 6 times (24sc)
Round 5: BLO 24sc
Round 6-9: 24sc (4 rounds)
Round 10: BLO 24sc

we begin with the decreases
Round 11: (2sc, 1dec) repeat 6 times (18sc)
Round 12: (1sc, 1dec) repeat 6 times (12sc)
Start stuffing
Round 13: 6dec (6sc)
Close the round with a  yarn needle, hide the tail.

COLOR WHITE
In round 5 (in the front loop) make 1 chain in each sc.
Close with slst and hide the tail.

COLOR PINK
Round 1: MR 6sc
Round 2: 6inc (12sc)
Round 3: (1sc, 1inc) (18sc)
Round 4: (2sc, 1inc) (24sc)
Round 5: In the first sc: chain 3 and go back with 2sc; skip 1 sc;
in the next sc: chain 5 and go back with 4sc; skip 1 sc;
Repeat the sequence until the round is complete.
Make a slst and cut.
Glue on top of the cupcake with hot silicone or glue.

Cupcake Candle
WIRE
Cut approximately 8cm of wire.

Fold the wire in half and insert it into the center of the cupcake, leaving the tip visible at the top.

COLOR BROWN
With hot silicone, wrap brown yarn around the bottom part of the wire.
COLOR ORANGE
With hot silicone and orange yarn, wrap several turns around the tip of the wire to create the wick effect.

Cupcake Assembly
COLOR WHITE
With white thread, sew the cupcake to Snoopy’s arms.

Optional: you can also glue the cupcake to the arms with hot silicone or craft glue.

Smile
COLOR BLACK
Between rounds 8 and 9, embroider Snoopy’s smile.
Leave a 3sc gap from the start of the eye.

Congratulations, you’ve finished your birthday Snoopy!
More Amigurumi Snoopy Ideas:

MATERIALS I USED
•- Super bulky  yarn (size 6) in yellow, brown and red
•- Crochet hook in size 5
•- Sewing needle, scissor, stitch marker
•- Polyfill
•- 14mm glitter safety eyes

ABBREVIATIONS
mr: magic ring
sc: single crochet
dc: double crochet
hdc: half double crochet
inc: 2 sc in the same st
dec: invisible decrease
st: stitch
sl st: slip stitch
ch: chain
bo: bobble stitch (6 loops on hook)
fo: fasten off

Amigurumi Crochet Chubby Pikachu Pokemon Free Pattern:

HEAD and BODY
Round 1: 8sc in mr (8)
Round 2: inc x8 (16)
Round 3: (sc, inc) repeat 8 times (24)
Round 4-6: sc around (3 rounds) (24)
Round 7: FLO only (2sc, inc) repeat 8 times (32)
Round 8: 9sc, BO, 12sc, BO, 9sc (32)
Round 9: (3sc, inc) repeat 8 times (40)
Round 10: sc around (40)
Round 11: 15sc, BO, 8sc, BO, 15sc (40)
Insert safety eyes between round 4/5, 4 visible stitches apart

Round 12: (3sc, dec) repeat 8 times (32)
Round 13: (2sc, dec) repeat 8 times (24)
Round 14: (1sc, dec) repeat 8 times (16)
Round 15: dec x8 (8)
Stuff the body.
Fasten off and close the hole.

BLUSH
add blush here

Stripes
Make sure the stripes are in the middle of the back.
Use brown yarn.
Start at round 9/10 with the first stripe, make it about 9sc
the next stripe will be at round 7/8 and about 5sc
the last is at round 5/6
2sc wide

TAIL
Start with brown, one round under the biggest stripe and insert your hook. make sure the tail is in the middle from the big stripe.
We now crochet 7 sc along the back for Row 1. Ch 1 and turn your work.
Row 2: 7sc, ch 1 & turn
Row 3: 5sc, change color to yellow, ch 1 & turn
Row 4: 5sc, ch 3 & turn
Row 5: starting the 2nd ch from the hook 5sc, ch 1 & turn
Row 6: 5sc & cut the yarn

Leave a short tail and weave in the ends. I like to use the yarn tails to secure the tail a bit on the back.

EARS
start in brown
Round 1: 4sc in mr (4)
Round 2: (1sc,inc) repeat 2 times (6)
Change color to yellow
Round 3-5: 6sc (3 rounds) (6)
Fasten off and leave a tail. Sew the opening closed.
Start at round 2 and sew the ears on with 3 stitches

Your Chubby Pikachu is ready!
More Amigurumi Pikachu Ideas:

MATERIALS AND TOOLS
• Yarn in the following colors: green, red, white, and scraps of yellow
• 9mm safety eyes
• Thin black thread for embroidery
• Fiberfill stuffing
• Liquid silicone glue
• Crochet hook
• Tapestry needle
• Thin embroidery needle
• Stitch marker
• Scissors
• Velcro or slicker brush (optional)

SIZE 15CM
I used 3 types of yarn:
• green – mixed 55% acrylic and 45% cotton (Tex 434)
• red – 100% cotton (Tex 492)
• white – 100% polyester (Tex 645.16)
For all yarns, I worked with a 2.0 mm hook and fake X stitch

ABBREVIATIONS
mr: magic ring
ch: chain
sc: single crochet
slst: slip stitch
inc: increase
dec: decrease
incT: triple increase (three stitches in the same base stitch)
BLO: back loop only
FLO: front loop only

Amigurumi Crochet Grinch Doll for Christmas Free Pattern:

ARM (2X)
With green yarn
Round 1. 6sc in mr [6]
Round 2. 6inc [12]
Round 3. 12sc [12]
Round 4. 3sc, 3dec, 3sc [9]
Round 5. 9sc [9]
Stuff with fiber
Switch to red yarn
Round 6. 9sc [9]
Round 7. BLO 7sc, dec [8]
Round 8-13. 8sc [8] (6 rnds)
Cut the yarn and finish off with an invisible finish. No need to leave a tail for sewing.
Return to rnd 6, with white yarn, hook facing down, and do:
Round 1. FLO 9sc [9]
Cut the yarn and finish off with an invisible finish.

LEG (2X)
With green yarn
Round 1. Ch 6, starting from the second ch from the hook: 4sc, incT in the last ch, on the other side of the chains: 3sc, inc [12]
Round 2. inc, 3sc, 3inc, 3sc, 2inc [18]
Round 3. BLO 18sc [18]
Round 4. 18sc [18]
Round 5. 2sc, 6dec, 4sc [12]
Round 6-11. 12sc [12] (6 rnds)
Stuff with fiber.
On the first leg, mark the inner center stitch, cut the yarn and finish off with an invisible finish. Do not cut the yarn on the second leg.

JOINING THE LEGS AND BODY
Round 12. On the second leg, sc until the inner side to center the stitches, then ch 2 (do not count in the final stitch count), make 1sc in the marked center stitch of the 1st leg, then 11sc on the 1st leg, 2sc in the chains, 12sc on the 2nd leg, 2sc in the chains (this is the new end of the round, move the marker) [28]
Round 13-16. 28sc [28] (4 rnds)

Switch to red yarn
Round 17. 28sc [28]
Round 18. BLO 28sc [28]
Round 19. (5sc, dec) repeat 4 times [24]
Round 20-21. 24sc [24] (2 rnds)
Round 22. (6sc, dec) repeat 3 times [21]
Round 23-24. 21sc [21] (2 rnds)
Round 25. 4sc, 4sc with the arm, 6sc, 4sc with the arm, 3sc [21]
Round 26. 4sc, 4sc with the arm, 6sc, 4sc with the arm, 3sc [21]
Round 27. (5sc, dec) repeat 3 times [18]
Stuff with fiber
Switch to green
Round 28. BLO (1sc, dec) repeat 6 times [12]
Round 29. (2sc, dec) repeat 3 times [9]
Round 30. 9sc [9]

CLOTHING DETAILS
Before starting the head, make the clothing details.
Work into the front loops left free in rnds 13 and 23.
With the hook facing down, insert the white yarn into the central front stitch of rnd 23.
Make 18sc and finish with 1slst in the first stitch.
Next, ch 7 (or as many as needed to reach rnd 13).
Attach the yarn to the central front stitch of rnd 13.
Make 28sc and finish with 1slst in the first stitch.
Cut the yarn and fasten off.
Apply a bit of glue under the central chains.

HEAD
Round 31. 9inc [18]
Round 32. 1sc, inc, (2sc, inc) repeat 5 times, 1sc [24]
Round 33. (3sc, inc) repeat 6 times [30]
Round 34. 2sc, inc, (4sc, inc) repeat 5 times, 2sc [36]
Round 35. (5sc, inc) repeat 6 times [42]
Round 36-38. 42sc [42] (3 rnds)
Round 39. 10sc, 3dec, 12sc, 3dec, 8sc [36]
Round 40-42. 36sc [36] (3 rnds)
Round 43. 2sc, dec, (4sc, dec) repeat 5 times, 2sc [30]
Round 44. 4sc, dec, (8sc, dec) repeat 2 times, 4sc [27]
Insert the eyes between rnds 36 and 37 with 7 stitches between them.
Make the waterline with yellow yarn.
With thin black thread, embroider the mouth and eyebrows.
With green yarn, make the nose and eyelids.
Round 45. (7sc, dec) repeat 3 times [24]
Round 46. 1sc, dec, (2sc, dec) repeat 5 times, 1sc [18]
Round 47. 18sc [18]
Stuff with fiber
Round 48. (1sc, dec) repeat 6 times [12]
Round 49. 6dec [9]
Cut the yarn and fasten off with an inverted magic ring.

HAIR
With green yarn
Round 1. Ch 5, starting from the second ch from the hook: 4slst [4]
Round 2. Ch 5, starting from the second ch from the hook: 4slst [4]
Round 3. Ch 4, starting from the second ch from the hook: 3slst [3]
Cut the yarn leaving a long tail for sewing. Sew to the top of the head.

HAT
With white yarn
Round 1. 6sc in mr [6]
Round 2. 6sc [6]
Switch to red yarn
Round 3. BLO 6sc [6]
Round 4-5. 6sc [6] (2 rnds)
Round 6. (1sc, inc) repeat 3 times [9]
Round 7-8. 9sc [9] (2 rnds)
Round 9. 1sc, inc, (2sc, inc) repeat 2 times, 1sc [12]
Round 10-11. 12sc [12] (2 rnds)
Round 12. (3sc, inc) repeat 3 times [15]
Round 13-14. 15sc [15] (2 rnds)
Round 15. 2sc, inc, (4sc, inc) repeat 2 times, 2sc [18]
Round 16-17. 18sc [18] (2 rnds)
Round 18. 1sc, inc, (2sc, inc) repeat 5 times, 1sc [24]
Round 19. (3sc, inc) repeat 6 times [30]
Round 20. 2sc, inc, (4sc, inc) repeat 5 times, 2sc [36]
Round 21. (5sc, inc) repeat 6 times [42]
Round 22-25. 42sc [42] (4 rnds)
Switch to white yarn
Round 26. 42sc [42]
Cut the yarn and finish off with an invisible finish.

FUR
To give my Grinch a furry look, I used mixed yarn (you can also use 100% acrylic) for the body and brushed it with the rough side of a velcro strip (or a slicker brush).

ALL DONE
Your Grinch is ready!
More Amigurumi Grinch Ideas:

MATERIALS
2.5mm and 3mm  crochet hook
Polyester fiberfill
Wire for the candy
8mm safety nose
White chenille
Yarn colors: white, black, light blue, red, and pink.

ABBREVIATIONS
MR: magic ring
CH: chain
SC: single crochet
INC: increase
W: 3 single crochet in the same stitch
DEC: decrease
SL ST: slip stitch
CH&T: chain and turn
BLO: work in back loop only
FLO: work in front loop only

Amigurumi Crochet Snoopy Dog with Candy for Christmas Free Pattern:

Head (white color)
Round 1. 6sc in MR (6)
Round 2. 6inc (12)
Round 3. (1sc, 1inc) repeat 6 times (18)
Round 4. (2sc, 1inc) repeat 6 times (24)
Round 5. (3sc, 1inc) repeat 6 times (30)
Round 6-12. 30sc (30)
Insert the nose between rounds 2-3
Round 13. 11sc, (1sc, 1inc) repeat 4 times, 11sc (34)
Round 14. 11sc, (2sc, 1inc) repeat 4 times, 11sc (38)
Round 15-21. 38sc (38)
Round 22. 3sc, (2sc, 1dec) repeat 8 times, 3sc (30)
Start stuffing
Round 23. (3sc, 1dec) repeat 6 times (24)
Round 24. (2sc, 1dec) repeat 6 times (18)
Round 25. (1sc, 1dec) repeat 6 times (12)
Round 26. 6dec (6)
Close the hole and hide the yarn

Body (white color)
Round 1. 6sc in MR (6)
Round 2. 6inc (12)
Round 3. (1sc, 1inc) repeat 6 times (18)
Round 4. (2sc, 1inc) repeat 6 times (24)
Round 5-8. 24sc (24)
Round 9. 9sc, 3dec, 9sc (21)
Round 10. 21sc (21)
Round 11. 7sc, 3dec, 8sc (18)
Round 12. 18sc (18)
Round 13. (1sc, 1dec) repeat 6 times (12)
Round 14. 2sl st, 8sc, 2sl st (12)
Stuff the body and cut leaving a long tail.

Legs x2 (white color)
Round 1. 4ch, starting from the second chain from the hook: 2sc, 3sc in the same stitch, 1sc, 1inc (8)
Round 2. 1inc, 1sc, 3inc, 1sc, 2inc (14)
Round 3. BLO 14sc (14)
Round 4. 14sc (14)
Round 5. 4sc, 3dec, 4sc (11)
Round 6. 3sc, 1dec, 1sc, 1dec, 3sc (9)
Round 7. 2sc, 2dec, 3sc (7)
Start stuffing
Round 8. 7sc (7)
Cut leaving a long tail.

Arms x2 (white color)

Round 1. 7sc in MR (7)
Round 2-6. 7sc (7)
Cut leaving a long tail.
Do not stuff.

Ears x2 (black color)
Round 1. 4ch, starting from the second chain from the hook: 2sc, 3sc in the same stitch, 1sc, 1inc (8)
Round 2. 1inc, 1sc, 3inc, 1sc, 2inc (14)
Round 3. 1sc, 1inc, 1sc, (1sc, 1inc) repeat 3 times, 1sc, (1sc, 1inc) repeat 2 times (20)
Round 4. 20sl st (20)
Cut leaving a long tail.

Spot (black color)
Round 1. 6sc in MR (6)
Cut leaving a long tail.

Join all the pieces
Sew the legs between rounds 2-3 of the body.
Sew the arms on the sides of the body at Round 12.
Sew the tail on the back of the body between rounds 4-5.
Sew the spot on the back of the body between rounds 8-10.
Sew the body to the head between rounds 14-18.
Sew the ears between rounds 18-21 of the head.

Face details
Using black thread
Embroider the eyes between rounds 13-14, 3 stitches long.
Embroider the mouth between rounds 12-13, 10 stitches long.

Scarf (light blue color)
Round 1. 41ch, starting from the second chain from the hook: 30sl st, 3ch skip 3 stitches, 7sl st ch and turn (40)
Round 2. BLO 40sl st (40)
Cut and hide the  yarn end.

Pom-pom (white chenille);
Switch to a 3mm hook
Round 1. 6sc in MR (6)
Round 2. 6sc (6)
Do not stuff
Close the hole and cut leaving a long tail.

Santa Claus hat (red color)
Round 1. 5sc in MR (5)
Round 2-3. 5sc (5)
Round 4. 1inc, 4sc (6)
Round 5. 1inc, 5sc (7)
Round 6. 7sc (7)
Round 7. 1inc, 6sc (8)
Round 8. 8sc (8)
Round 9. 1inc, 7sc (9)
Round 10. 9sc (9)
Round 11. 1inc, 8sc (10)
Round 12. 10sc (10)
Round 13. (4sc, 1inc) repeat 2 times (12)
Round 14. 12sc (12)
Round 15. (3sc, 1inc) repeat 3 times (15)
Round 16. 15sc (15)
Round 17. (4sc, 1inc) repeat 3 times (18)
Round 18. 18sc (18)
Round 19. (2sc, 1inc) repeat 6 times (24)
Round 20. (3sc, 1inc) repeat 6 times (30)
Round 21. (4sc, 1inc) repeat 6 times (36)
Round 22. (5sc, 1inc) repeat 6 times (42)
Round 23. (6sc, 1inc) repeat 6 times (48)
Round 24. 48sc (48)
Round 25. (6sc, 1dec) repeat 6 times (42)
Switch to white chenille and 3mm hook
Round 26. 42sc (42)
Cut and hide the yarn end.

Sew the pom-pom to the tip of the hat.
Then make sure to secure the longer part of the hat with red yarn so it doesn’t lift up.

Candy (start with pink)
We will alternate the colors white and pink. Change the color as indicated and use a 2.5 mm hook.
Round 1. 6sc in MR (6)
Round 2. 6inc (12)
Round 3. BLO 12sc (12)
Round 4. 12sc (12)
Round 5-6. White 12sc (12)
Round 7-8. Pink 12sc (12)
Round 9-10. White 12sc (12)
Round 11-12. Pink 12sc (12)
Round 13-14. White 12sc (12)
Round 15-16. Pink 12sc (12)
Round 17-18. White 12sc (12)
Round 19-20. Pink 12sc (12)
Round 21-22. White 12sc (12)
Round 23-24. Pink 12sc (12)
Round 25-28. White 12sc (12)
Insert the wire and start stuffing.
Cut the wire to the same length as the candy you just crocheted.
Round 29. White 6dec (6)
Close the hole and cut leaving a long tail.
Bend the tip of the candy and secure it with white yarn to keep its shape.

Finally, attach the accessories: put on the scarf by inserting the end into the hole we left, place the hat, and sew the candy to the arm.

Snoopy is ready!
More Amigurumi Snoopy Ideas:

This crochet pattern creates a serene, minimalist figure of the Blessed Virgin Mary, designed as a spiritual home decor piece, not a toy.
The calm expression, flowing silhouette, and soft colors make it suitable for prayer corners, shelves, and meaningful gifts.

📏 Finished Size

Approx. 22–24 cm (8.5–9.5 inches) tall
(depending on yarn and tension)

🧶 Skill Level

Intermediate
(Simple stitches, shaping and assembly)

🧵 Materials

• Cotton yarn (DK / Sport weight):
  • Off-white / Cream (body & head)
  • Light blue (shawl)
  • Light grey (cloud base)
  • Light brown (hair)
  • Gold thread (optional, decorative detail)
• Crochet hook: 2.25 mm or 2.5 mm
• Polyester fiberfill
• Yarn needle
• Scissors
• Black embroidery thread (for eyes)

✂️ Abbreviations (US Terms)

• MR – Magic Ring
• sc – Single crochet
• inc – Increase (2 sc in one stitch)
• dec – Decrease (sc 2 together)
• sl st – Slip stitch
• ch – Chain

Work in continuous rounds unless stated otherwise.

1️⃣ HEAD (Off-White)

R1: MR 6 sc (6)
R2: inc x6 (12)
R3: (sc, inc) x6 (18)
R4: (2 sc, inc) x6 (24)
R5: (3 sc, inc) x6 (30)
R6–10: sc around (30)

👉 Eyes:
Using black embroidery thread, embroider two small curved closed eyes between R7–R8, about 6 stitches apart.
(No mouth is added.)

R11: (3 sc, dec) x6 (24)
R12: (2 sc, dec) x6 (18)
Stuff firmly.
R13: (sc, dec) x6 (12)
R14: dec x6 (6)
Fasten off.

2️⃣ BODY & DRESS (Off-White)

Worked top down in one piece.

R1: MR 6 sc (6)
R2: inc x6 (12)
R3: (sc, inc) x6 (18)
R4–10: sc around (18)

Stuff lightly.

Dress shaping:

R11: (2 sc, inc) x6 (24)
R12: (3 sc, inc) x6 (30)
R13: (4 sc, inc) x6 (36)
R14–18: sc around (36)

Lightly stuff lower body to keep a flowing shape.
Fasten off.

3️⃣ ARMS (Make 2 – Off-White)

R1: MR 6 sc (6)
R2: (sc, inc) x3 (9)
R3–7: sc around (9)

Flatten slightly and close with sc across.
Do not overstuff.
Sew arms gently crossed at chest level.

4️⃣ HAIR (Light Brown)

Attach yarn at the back of the head.

• Ch 8–12, sl st in next stitch
• Repeat around the back and sides of the head
• Vary chain length slightly for a natural flow

Fasten off and lightly shape with fingers.

5️⃣ SHAWL / VEIL (Light Blue)

Worked flat.

Ch 26
Row 1: sc in 2nd ch from hook, sc across (25)
Row 2–18: ch 1, turn, sc across (25)

Fold gently around head and shoulders.
Sew lightly at sides, leaving the front open.

✨ Optional: Add a thin gold thread along the edge with surface slip stitches.

6️⃣ CLOUD BASE (Light Grey)

R1: MR 6 sc (6)
R2: inc x6 (12)
R3: (sc, inc) x6 (18)
R4: (2 sc, inc) x6 (24)

Create small bobble-like puffs around the edge:
(3 hdc in one stitch, sl st) repeat evenly.

Lightly stuff and flatten.
Sew body securely onto the cloud base.

🕯️ Optional Variations

• LED candle version: create a small opening in the cloud base
• Mini version: use thinner yarn and 1.75 mm hook
• Wall hanging: add a loop behind the head

⚠️ Important Notes

• This item is NOT intended as a toy
• Designed for decorative and spiritual use
• Suitable for shelves, prayer corners, and gifts

Finished Amigurumi Crochet Minimal Blessed Mary – Color Variations

Materials:
– Worsted-weight yarn (4-ply) in white, orange, brown, black, gray, red, green, and gray. (The U.K. equivalent is Aran, and AUS/NZ is 8 ply.) For my white, black, red, green and gray, I used Hobby Lobby’s I Love This Yarn in the following colors: “White”, “Black”, “Red”, “Jelly Bean”, & “Gray Mist”. For the orange I used Paintbox Yarns in the color “Blood Orange”. For the dark brown I used Red Heart Soft in the color “Chocolate”. For the blue I used Red Heart Super Saver in the color “Turqua”
– G (4 mm) crochet hook
– 12 mm black safety eyes
– Fiberfill (or your stuffing of choice) 
– Bent tip tapestry needle
– Scissors 
– Stitch marker 
– Cardboard
– Three 1/2 inch (1.27 cm) pre-made pom poms OR pre-made holly berries
– Straight pins

Abbreviation
Abbreviations are in U.S. terms.
sc – single crochet
st/sts – stitch(es)
sl st – slip stitch
dec – decrease (join the next 2 stitches together)
inc – increase (2 single crochet in the next stitch)
hdc – half double crochet
BLO – back loops only
FLO – front loops only
R1 – round 1
rep – repeat
** – repeat the group of instructions between the asterisks the number of times indicated.

Amigurumi Crochet Christmas Snowman Free Pattern:

Head (Using White Yarn)
R1: ch 2, starting in the 2^nd ch from hook, sc 6 (6 sts) (you can use the magic ring if you prefer, as it won’t make a difference in the end. In that case, you will make a magic ring and make 6 sc in the magic ring. Watch this video to see how to start crocheting in the round using the “ch 2 method”.)
R2: *inc* rep 6 times (12 sts)
R3: *sc 1, inc* rep 6 times (18 sts)
R4: *sc 2, inc* rep 6 times (24 sts)
R5: *sc 3, inc* rep 6 times (30 sts)
R6: *sc 4, inc* rep 6 times (36 sts)
R7: sc in all 36 sts (36 sts)
R8: *sc 5, inc* rep 6 times (42 sts)
R9-10: sc in all 42 sts (2 rounds total at 42 sts each)
R11: *sc 6, inc* rep 6 times (48 sts)
R12-16: sc in all 48 sts (5 rounds total at 48 sts each)
R17: *sc 6, dec* rep 6 times (42 sts)
R18: *sc 5, dec* rep 6 times (36 sts)
Stop and insert your 12mm safety eyes between R15 & 16, 10 sts apart. (Hint: insert the 1st eye. Count 10 sts from the hole where you inserted the 1st eye and insert the 2nd eye. There will be 8 visible sts between the eyes.
R19: *sc 4, dec* rep 6 times (30 sts)
R20: *sc 3, dec* rep 6 times (24 sts)
Start to stuff the head, continuing to stuff as you work.
R21: *sc 2, dec* rep 6 times (18 sts)
Finish off. No need to leave a long tail. Finish stuffing the head and set it aside. Do not close hole.

Carrot Nose (Using Orange Yarn)
R1: ch 2, starting in the 2^nd ch from hook, sc 5 (5 sts)
R2: sc in all 5 sts (5 sts)
R3: *sc 1, inc* rep 2 times, sc 1 (7 sts)
R4: sc in all 7 sts (7 sts)
Finish off leaving a long tail for sewing. No need to stuff.

Position the nose over R14-17 of the head centered between the eyes and pin it into place using straight pins so that it doesn’t shift around while we are sewing. Using the long tail we left and your tapestry needle, sew the nose to the head using the whipstitch.

When you are finished, make a knot to secure the sewing and weave the remaining tail into the head.

Body (Using White Yarn)
R1: ch 2, starting in the 2^nd ch from hook, sc 6 (6 sts)
R2: *inc* rep 6 times (12 sts)
R3: *sc 1, inc* rep 6 times (18 sts)
R4: *sc 2, inc* rep 6 times (24 sts)
R5: *sc 3, inc* rep 6 times (30 sts)
R6-10: sc in all 30 sts (5 rounds total at 30 sts each)
R11: *sc 3, dec* rep 6 times (24 sts)
R12: *sc 2, dec* rep 6 times (18 sts)
R13: *sc 4, dec* rep 3 times (15 sts)
R14: *sc 4, inc* rep 3 times (18 sts)
R15: *sc 2, inc* rep 6 times (24 sts)
R16-18: sc in all 24 sts (3 rounds total at 24 sts each)
R19: *sc 2, dec* rep 6 times (18 sts)
Finish off leaving a long tail for sewing. Stuff the body firmly.
Since both the last round of the head and the last round of the body have 18 sts, the two pieces will line up perfectly.
Using the whipstitch, sew the body and head together.
When you are about three-fourths of the way around, you might want to put a little more stuffing into the neck to make it sturdier. When finished, knot the finishing tail from the head to the remaining body tail to secure the sewing and weave the tails into the body to finish.

Arms (Make 2 Using Brown Yarn)
Arms are worked in rows instead of rounds
R1: ch 7, starting in the 2^nd ch from hook, make 1 sc in each of the 6 chs (6 sts), ch 1, turn
R2: sc in all 6 sts (6 sts)
Finish off leaving a long tail for sewing. Fold each arm in half lengthwise to create a tube. Using the long tail we left and our tapestry needle, sew the long edges together using the whipstitch
When finished, knot the remaining sewing tail and the starting tail together to secure the sewing and weave the remaining tails into the body.

Scarf (Using Any Color of Yarn)
Note: If you want your scarf to be thicker, make sc sts instead of sl sts. You can also ch more than 47 if you want a longer scarf.
Ch 47, starting in the 2^nd ch from hook, make 1 sl st in each of the 46 chs (46 sts)

Finish off leaving a tail. To secure the ends so that they don’t fray, knot the starting tail and the finishing tail together. You can now either just cut the ends (it will leave a small amount of fraying on the ends), or weave the tails up into the scarf and then cut the ends. Place the scarf around your snowman’s neck.

Top Hat (Starting in Black Yarn)
R1: ch 2, starting in the 2^nd ch from hook, sc 6 (6 sts)
R2: *inc* rep 6 times (12 sts)
R3: *sc 1, inc* rep 6 times (18 sts)
R4: *sc 2, inc* rep 6 times (24 sts)
R5: *sc 3, inc* rep 6 times (30 sts)
R6: *sc 4, inc* rep 6 times (36 sts)
R7: *sc 5, inc* rep 6 times (42 sts)
R8: in BLO (Back Loops Only) *sc 5, dec* rep 6 times (36 sts) (this is the last round we’ll crochet in the BLO until R14a)
R9-13: sc in all 36 sts (5 rounds total at 36 sts each)

Switch to gray yarn. 
R14a: in BLO very loosely slip stitch in all 36 sts (36 sts)
R14: in BLO sc 36 (36 sts) (this is the last round we will crochet in the BLO)
Switch to black yarn
R15: in FLO (Front Loops Only) *sc 1, inc* rep 18 times (54 sts) (this is the only rounds we will crochet in the FLO)
R16: sc in all 54 sts (54 sts)
R17: *sc 4, inc* rep 10 times, sc 4 (64 sts)
R18: sc in all 64 sts (64 sts)
Finish off neatly using the invisible finish technique and leave a long tail for sewing.

Sewing the Hat to the Head
In order to keep the top of the hat nice and flat, we will cut out a circle of cardboard the same size as the top of the hat and place it in the hat so that it fits snugly. You can use any kind of cardboard for this. Once you have done this, stuff the hat lightly.

Weave the finishing tail over to the inside edge of the hat so that the tail comes up between R14 and 15 of the hat. We will use this tail to sew the hat to the snowman’s head.

Position the hat onto your snowman’s head any way that you like. I placed mine at an angle. Pin it into place using straight pins to keep it from shifting around while we sew it on.
Using the long tail we left and our tapestry needle, sew it to the head like this: 
Step 1: Go over one stitch on the hat and then pull your needle down through the hat and through a stitch of the head. 
Step 2: Pull your needle up through the hat and repeat step 1. Repeat steps 1-2 all the way around until the hat is sewn on. When finished, make a knot to secure the sewing and weave the remaining tail into the head.

Holly Berry Leaves (Make 2 Using Green Yarn)

Ch 4, in the 2^nd ch from the hook, make 3 sc sts, make 1 sl st in each of the next 2 chs, now rotate your work 180 degrees and work in the front loops of the ch, starting in the first ch, make 1 sl st in each of the next 2 chs, make 3 sc sts in the last ch (10 sts). This is called starting your work with a foundation chain and is a great way to start a piece you want to be more oval than round. After crocheting through the top loops of the chain, you turn your work upside down so that the sts you just crocheted are at the bottom and the front/bottom loops of the chain are now at the top. These are the sts you will now work into. Once you’re at the end of the row, the first round is complete! Now you just continue as you normally would working in the round. Watch this video to learn how to crochet into a foundation chain.
Finish off neatly using the invisible finish technique. 

Adding the Berries
To add the little holly berries, take three red premade pom poms (0.5 in/1.27 cm in size) and glue them to the side of the hat using fabric glue.
Once the glue has dried, sew the bottoms of the leaves to the side of the hat nestled in between the pom poms.. Now knot the two tails together to secure them and weave the tails into the hat again to finish.

Stocking Cap (Using Any Color of Yarn)
Note: Hat is worked entirely in hdc sts. If you tend to crochet very loosely when you make hdc sts then please consider going down a hook size or two to compensate for the size difference.
R1: ch 2, starting in the 2^nd ch from hook, hdc 6 (6 sts)
R2: *hdc inc* rep 6 times (12 sts)
R3: *hdc 1, hdc inc* rep 6 times (18 sts)
R4: *hdc 2, hdc inc* rep 6 times (24 sts)
R5: *hdc 3, hdc inc* rep 6 times (30 sts)
R6: *h
R10: *hdc 6, hdc inc* rep 6 times (48 sts)
R11-13: hdc in all 48 sts (3 rounds total at 48 sts each)
Finish off. No need to leave a long tail. Set the hat aside until we make the hat band and pom pom.

Hat Band (Using Any Color of Yarn)
Hat band is worked in rows instead of rounds so we will ch 1, and turn at the end of each row. The hat band is also worked entirely in the BLO (back loops only) using sc sts.
R1: ch 4, starting in the 2^nd ch from the hook, sc 3 (3 sts), ch 1, turn
R2-62: in BLO sc in all 3 sts, ch 1, turn (61 rows total at 3 sts each)
Before finishing off, wrap the band around the hat to make sure it is the correct length for your hat. You may need to make it shorter or longer than mine. Finish off leaving a long tail for sewing.

Join the two short ends of the band together and sew them together using the whipstitch. You now have a circular band.

Pom Pom (Using Any Color of Yarn)
I made my pom pom using a mini 2.5 inch pom pom maker. There are many different ways to make pom poms, including with cardboard or with a dinner fork. Below are links to video tutorials for each of these methods.
When complete, sew the pom pom to the top of the hat. To do this, pull one of the tails from the pom pom through the top center of the hatand then pull the second tail from the pom pom through the center of the hat one stitch over from the first tail.
Pull the two tails tight then on the inside of your hat, knot them together to secure the pom pom to the hat. Cut the ends to finish.
Place the hat on your snowman and you’re done!

More Amigurumi Christmas Snowman Ideas:

Materials:
(Affiliate links coming at you!)
– 2.75mm hook for main
– Any light weight yarn in the following colours:
* Skin (MC) (I used Hobbii Friends Cotton 8/6 Color 03, approx 25g);
* Grey (CC) (I used Hobbii Rainbow Cotton 8/6 Color 97, approx 25g);
* Red (I used Hobbii Friends Cotton 8/6 Color 41, small amount);
* Light pink for nose (I used Hobbii Rainbow Cotton 8/6 Color 46, small amount);
– You will also need a small amount of fine weight green yarn for the optional leaf embellishment (I used Rainbow Cotton 8/4 Color 100);
– Black crochet thread, size 5 for eyes and mouth;
– Black sewing thread and sewing needle for eyes (alternatively, safety eyes);
– Stuffing;
– Tapestry needle.

Terms and Stitches:
Ch – Chain
Slst – Slip stitch
MR – Magic Ring
Sc – Single Crochet
Inc – Increase. Work a regular sc increase
Dec – Decrease. Work a regular sc decrease
Hdc – Half double crochet
Picot – Ch 2, slst into 2nd ch from hook.
Fsc – Foundation single crochet. A foundation single crochet is made up of a chain st and a sc. Insert hook into either: (a) the side of the previous st if the previous st is a regular sc; or (b) into the ch of the previous st if the previous st is a FSc, yarn over and pull up a loop, yarn over and pull through one loop (chain st made), yarn over and pull through both loops on hook (sc made).

Amigurumi Crochet Mrs. Claus Ornament Free Pattern:

Front Panel (make 1):
Row 1: In MC, ch 8, starting in 2nd ch from hook, sc in each ch (7 sts), ch 1, turn
Row 2: Inc twice, sc 3, inc twice (11 sts), ch 1, turn.
Row 3: Inc twice, sc 7, inc twice (15 sts), ch 1, turn.
Row 4: Inc, sc 13, inc (17 sts), ch 1, turn.
Row 5: Inc, sc 15, inc (19 sts), ch 1, turn.
Row 6: Sc in each st (19 sts), ch 1, turn.
Row 7: Inc, sc 17, inc (21 sts), ch 1, turn.
Rows 8-14: Sc in each st (21 sts), ch 1, turn.
Row 15: Dec, sc 17, dec (19 sts), ch 1, turn.
Row 16: Sc in each st (19 sts), ch 1, turn.
Row 17: Dec, sc 15, dec (17 sts), ch 1, turn.
Row 18: Dec, sc 13, dec (15 sts), ch 1, turn.
Row 19: Dec twice, sc 7, dec twice (11 sts), ch 1, turn.
Row 20: Dec twice, sc 3, dec twice (7 sts), ch 1, turn.
Row 21: Inc, sc 5, inc (9 sts), ch 1, turn.
Row 22: Inc, sc 7, inc (11 sts), ch 1, turn.
Rows 23-24: Sc in each st (11 sts), ch 1, turn.
Row 25: Dec, sc 7, dec (9 sts), ch 1, turn.
Row 26: Dec twice, sc 1, dec twice (5 sts), ch 1, turn.
Row 27: Dec, sc 1, dec (3 sts).
Tie off. Weave ends to the back. Set aside.

Back Panel (make 1):
Row 1: In MC, ch 8, starting in 2nd ch from hook, sc in each ch (7 sts), ch 1, turn.
Row 2: Inc twice, sc 3, inc twice (11 sts), ch 1, turn.
Row 3: In MC work an inc in the first st, in the next st work [sc in MC, sc in CC] in the same st, in CC sc 7,
in the next st work [sc in CC, sc in MC] in the same st, in MC work an inc in the last st (15 sts), ch 1, turn.
Row 4: In MC work an inc in the first st, in CC sc 13, in MC work an inc in the last st (17 sts), ch 1, turn.
Rows 5-27: In CC, work rows 5 to 27 the same as for the Front Panel.
Tie off. Weave ends to the back. Set aside.

Hair (make 1):
Hair Piece 1:
Row 1: In CC ch 5, starting in 2nd ch from hook, sc in each ch (4 sts), ch 1, turn.
Row 2: Inc twice, sc 2 (6 sts), ch 1, turn.
Row 3: Sc 5, inc (7 sts), ch 1, turn.
Row 4: Sc 5, dec (6 sts).
Tie off. Set aside.

Hair Piece 2:
Row 1: In CC ch 5, starting in 2nd ch from hook, sc in each ch (4 sts), ch 1, turn.
Row 2: Sc 2, inc twice (6 sts), ch 1, turn.
Row 3: Inc twice, sc 4 (8 sts), ch 1, turn.
Row 4: Sc 7, inc (9 sts), ch 1, turn.
Row 5: Inc twice, sc 7 (11 sts), ch 1, turn.
Row 6: Sc 10, inc (12 sts), ch 1, turn.
Row 7: Inc, sc 9, dec (12 sts), ch 1, turn.
Row 8: With the WS facing, sc 12, fsc 1, join Hair Piece 1 by sc 6 across (19 sts), ch 1, turn.
Row 9: Dec, sc 15, dec (17 sts), ch 1, turn.
Row 10: Dec, sc 13, dec (15 sts), ch 1, turn.
Row 11: Dec twice, sc 7, dec twice (11 sts), ch 1, turn.
Row 12: Dec twice, sc 3, dec twice (7 sts), ch 1, turn.
Row 13: Inc, sc 5, inc (9 sts), ch 1, turn.
Row 14: Inc, sc 7, inc (11 sts), ch 1, turn.
Rows 15-16: Sc in each st (11 sts), ch 1, turn.
Row 17: Dec, sc 7, dec (9 sts), ch 1, turn.
Row 18: Dec twice, sc 1, dec twice (5 sts), ch 1, turn.
Row 19: Dec, sc 1, dec (3 sts), ch 1, turn.
Tie off. Weave ends to the back. Set aside.

Ribbon (make 1):
Row 1: Ch 31, starting in 2nd ch from hook, slst in each ch (30 sts)
Tie off. Set aside.

Leaf Embellishment (make 1):
Row 1: In fine weight yarn, ch 5, starting in 2nd ch from hook, slst in first ch, [sc, picot, sc] in the same st, [hdc, picot, hdc] in the same st, 4 hdc in last ch, working on opposite side of chain [hdc, picot, hdc] in same st, [sc, picot, sc] in same st, [slst, picot, slst] in last st.
Tie off. Set aside.
Move on to assembly below!

Assembly:
1- Using black crochet thread, stitch happy eyes onto the front panel between rows 7-8. The eyes should be 3 sts in from each side and each eye will span about 4 sts wide and 1 st high. Use black sewing thread and a sewing needle to stitch them in place. 
2- Using pink yarn, stitch a nose between the eyes at row 6, spanning 2 sts. Stitch around the sts several times to create a small bump.
3- Using black crochet thread, stitch a mouth onto the front body panel spanning two sts diagonally over row 4.
4- Stack the panels as follows: back panel on bottom, front panel in the middle, hair on top. Make sure all the yarn ends of the panels are facing inward so that they are hidden. Match up all rows with the front/right side facing you. Starting near the top on the left side of the bun, begin attaching the panels together by inserting your hook through all three panels and single crocheting around the outside edge of the panels starting in grey (see photos below). Once you’ve crocheted down to the edge of the hair, switch to MC yarn. Now you will be crocheting through only two panels (the front and back). Continue crocheting down around the bottom and part way up the other side, switching back to grey when you reach the hair on the other side; you will now be crocheting through three panels again! Crochet up to the base of the bun. Stop here and stuff. Insert stuffing into the space between the front and back panels (i.e. NOT the space between the hair and front panel). Continue crocheting up and around the bun, stuffing as you go. Slst to beginning stitch to close and weave ends.
5- Wrap the ribbon around the base of the bun from back to front so that the ends overlap on the front/side of the bun. Use the yarn ends to stitch the ribbon in place.
6- Use yarn ends of the leaf to stitch the leaf embellishment to the hair, above the ribbon.
7- Apply blush to the cheeks if desired.

More Amigurumi Ornament Ideas:

Materials:
(Affiliate links coming at you!)
– 2.75mm hook for main ;
– Main Colour (MC) – Hobbii Friends Cotton 8/6 in color 03 (Oatmilk) for skin (less than 50g);
– Contrasting Colour (CC) – Hobbii Rainbow Cotton 8/6 in color 07 (Brown) for hair (less than 50g);
– Rainbow Cotton 8/6 in color 46 (Old Rose) for nose (small amount);
– Green/Yellow Hat:
* Hobbii Rainbow Cotton 8/6 in color 55 (Sunny Yellow) (less than 50g);
* Hobbii Friends Cotton 8/6 in color 103 (Parakeet) (less than 50g);
– Red/Green Hat:
* Hobbii Friends Cotton 8/6 in color 41 (Pomegranate) (less than 50g);
* Hobbii Friends Cotton 8/6 in color 105 (Emerald) (less than 50g);
– Pink Striped Hat:
* Hobbii Rainbow Cotton 8/6 in color 62 (Light Pink) (less than 50g);
* Hobbii Rainow Cotton 8/6 in color 44 (Rose) (less than 50g)
* Hobbii Rainbow Cotton 8/6 in color 25 (Pastel Mint) (less than 50g);
– Black crochet thread;
– 9mm Safety eyes;
– Stuffing;
– Tapestry needle.

Terms and Stitches:
Ch – Chain
Slst – Slip stitch
MR – Magic Ring
Sc – Single Crochet
Inc – Increase. Work a regular sc increase
Inc twice – Work a regular sc increase in each of the next 2 sts
Dec – Decrease. Work a regular sc decrease
Dec twice – Work a regular sc decrease two times over the next 4 sts.
Sc3tog – Single crochet three stitches together
Hdc – Half double crochet
Dc – Double crochet

Invisible join – After last st, cut yarn and pull up on the working loop until the yarn tail is pulled all the way through. With tapestry needle, thread yarn tail through the next st from back to front and then down into the centre of the “V” of the last st worked. Pull tight. Weave ends.,

Amigurumi Crochet Elf Ornament Free Pattern:

Front Panel (make 1):
Row 1: In MC yarn, ch 8, starting in 2nd ch from hook, sc in each ch (7 sts), ch 1, turn.
Row 2: Inc twice, sc 3, inc twice (11 sts), ch 1, turn.
Row 3: Inc twice, sc 7, inc twice (15 sts), ch 1, turn.
Row 4: Inc, sc 13, inc (17 sts), ch 1, turn.
Row 5: Inc, sc 15, inc (19 sts), ch 1, turn.
Row 6: Sc in each st across (19 sts), ch 1, turn.
Row 7: Inc, sc 17, inc (21 sts), ch 1, turn.
Rows 8-10: Sc in each st across (21 sts), ch 1, turn.
Start colourwork in next row.
Rows 11-12: In CC sc 1, in MC sc 19, in CC sc 1 (21 sts), ch 1, turn.
Row 13: Sc 2, in MC sc 17, in CC sc 2 (21 sts), ch 1, turn.
Row 14: Sc 3, in MC sc 15, in CC sc 3 (21 sts), ch 1, turn.
Row 15: Dec, sc 3, in MC sc 11, in CC sc 3, dec (19 sts), ch 1, turn.
Remaining rows are worked entirely in CC.
Row 16: Sc in each st across (19 sts), ch 1, turn.
Row 17: Dec, sc 15, dec (17 sts), ch 1, turn.
Row 18: Dec, sc 13, dec (15 sts), ch 1, turn.
Row 19: Dec twice, sc 7, dec twice (11 sts), ch 1, turn.
Row 20: Dec twice, sc 3, dec twice (7 sts), ch 1, turn.
Row 21: Dec, sc 3, dec (5 sts).
Tie off. Weave ends to the back. Set aside.

Back Panel (make 1):
Row 1: In MC yarn, ch 8, starting in 2nd ch from hook, sc in each ch (7 sts), ch 1, turn.
Row 2: Inc twice, sc 3, inc twice (11 sts), ch 1, turn.
Row 3: Inc, in the next st work (sc 1, in CC sc 1) all into the same st, continuing in CC sc 7, in the next st work (sc 1, in MC sc 1) all into the same st, inc (15 sts), ch 1, turn.
Row 4: Inc, in CC sc 13, in MC inc (17 sts), ch 1, turn.
All remaining rows are worked entirely in CC.
Row 5: In CC inc, sc 15, inc (19 sts), ch 1, turn.
Row 6: Sc in each st across (19 sts), ch 1, turn.
Row 7: Inc, sc 17, inc (21 sts), ch 1, turn.
Rows 8-14: Sc in each st across (21 sts), ch 1, turn.
Row 15: Dec, sc 17, dec (19 sts), ch 1, turn.
Row 16: Sc in each st across (19 sts), ch 1, turn.
Row 17: Dec, sc 15, dec (17 sts), ch 1, turn.
Row 18: Dec, sc 13, dec (15 sts), ch 1, turn.
Row 19: Dec twice, sc 7, dec twice (11 sts), ch 1, turn.
Row 20: Dec twice, sc 3, dec twice (7 sts), ch 1, turn.
Row 21: Dec, sc 3, dec (5 sts).
Tie off. Weave ends to the back. Set aside.

Ears (make 2):
Rnd 1: In MC work 4 sc into a MR (4 sts)
Rnd 2: Sc in each st around (4 sts)
Rnd 3: Inc in first st, sc 3 (5 sts)
Rnd 4: Inc twice, sc 3 (7 sts)
Rnd 5: Inc in each of the next 3 sts, sc 4 (10 sts)
Rnd 6: Sc in each st around (10 sts)
Rnd 7: Sc 6, dec twice (8 sts)
Rnd 8: Dec, sc 4, dec (6 sts)
Tie off. No need to stuff. Flatten and set aside.

Curls (make 3):
Row 1: In CC, ch 11, starting in 2nd ch from hook, sc in each st (10 sts)
Tie off. Twist the ends to curl them. Set aside.

Hat Panel (make 2):
Row 1: Ch 20, starting in 2nd ch from hook, sc in each ch across (19 sts), ch 1, turn.
Rows 2-3: Sc in each st across (19 sts), ch 1, turn.
Row 4: Dec, sc 15, dec (17 sts), ch 1, turn.
Row 5: Dec, sc 13, dec (15 sts), ch 1, turn.
Row 6: Sc in each st across (15 sts), ch 1, turn.
Row 7: Dec, sc 11, dec (13 sts), ch 1, turn.
Row 8: Dec, sc 9, dec (11 sts), ch 1, turn.
Row 9: Sc in each st across (11 sts), ch 1, turn.
Row 10: Dec, sc 7, dec (9 sts), ch 1, turn.
Row 11: Dec, sc 5, dec (7 sts), ch 1, turn.
Row 12: Dec, sc 3, dec (5 sts), ch 1, turn.
Row 13: Sc in each st across (5 sts), ch 1, turn.
Row 14: Dec, sc 1, dec (3 sts), ch 1, turn.
Row 15: Sc3tog (1 st).

Tie off. With the front of the hat facing you, insert your hook into the lower right hand corner and single crochet around two sides to join them, leaving the bottom open. Work 4 sc into the top stitch to crochet around the tip of the hat.
For the Green/Yellow hat: Work 5 rows in green, then 5 rows in yellow, then 5 rows in green.
For the Pink Striped hat: Alternate working 3 rows in dark pink and 3 rows in light pink.
For the multicolour hat: Work 2 rows of each colour.

Optional Hat Trim:
Turn hat so the pointed end is downward. Insert your hook into the side of the hat where the two panels are joined and join yarn.
Row 1: Sc in each ch around and work an inc at each join (42 sts), join with a slst, ch 1, turn.
Row 2: *Sc, sk 2 sts, 5 dc into the next st, sk 2 sts, repeat from * 6 more times, slst to beginning st.
Tie off. Weave ends. Fold the brim upwards onto the hat. Stitch down in a couple of places to secure if needed.
Move on to assembly below!

Assembly:
1- Using contrasting colour yarn, stitch the three curls onto the middle of the front panel between rows 19 and 20. When laying flat, the curls should extend down below the hairline by 4 or 5 rows. Weave ends.
2- Insert 9mm safety eyes into the front panel between rows 7 and 8 with approximately 9 or 10 sts between them.
3- With a tapestry needle and colour “Old Rose”, stitch a nose between the eyes at row 6.
4- With black crochet thread or fine weight yarn, stitch a mouth at row 4 by stitching diagonally across two stitches.
5- With black crochet thread or fine weight yarn, stitch eyebrows above each eye by stitching diagonally over rows 10-12.
6- Add rosy cheeks if desired using pink yarn, or apply blush/pastel chalk.
7- Place both panels together, matching up all rows and with the front facing you. Starting near the top on the left side, begin attaching the panels together by inserting your hook through both panels and single crocheting around the outside edge of the panels starting in contrasting colour. Switch to main colour when you reach the skin. Crochet around, switching back to contrasting colour for the hair when needed. When only the top remains open, stuff firmly. Continue crocheting around and close with an invisible join. Weave ends.
8- Stitch ears to either side of the face at rows 6-10 (i.e. just below where the hair starts). Weave ends.
9- Place hat on elf and adjust curls so that they curl up over the brim of the hat. Stitch hat in place in a few places around (or pin in place if you don’t want to permanently attach the hat).
10- Attach a hanging loop to the top of the hat.
You’re done!

More Amigurumi Ornament Ideas:

Materials:
(Affiliate links coming at you!)
– 2.75mm hook for main (I use THESE hooks!);
– Any light weight yarn in the following colours:
* Skin (MC) (I used Hobbii Friends Cotton 8/6 Color 03, approx 25g);
* Red (I used Hobbii Friends Cotton 8/6 Color 41, approx 15g);
* White (I used Hobbii Rainbow Cotton 8/6 Color 01, approx 25g)
* Light pink for nose (I used Hobbii Rainbow Cotton 8/6 Color 46, small amount);
– 9mm safety eyes;
– Stitch markers;
– Stuffing;
– Tapestry needle.

Terms and Stitches:
Ch – Chain
Slst – Slip stitch
Sc – Single Crochet (again, in rows with colour changes, sc stitches will be indicated with the Colour Legend letter instead of “sc”)
Inc – Increase. Work a regular sc increase
Dec – Decrease. Work a regular sc decrease
Hdc – Half double crochet

Amigurumi Crochet Santa Claus Ornament Free Pattern:

Panels (make 2):

Row 1: In MC, ch 8, starting in 2nd ch from hook, sc in each ch (7 sts), ch 1, turn.
Row 2: Inc twice, sc 3, inc twice (11 sts), ch 1, turn.
Row 3: Inc twice, sc 7, inc twice (15 sts), ch 1, turn.
Row 4: Inc, sc 13, inc (17 sts), ch 1, turn.
Row 5: Inc, sc 15, inc (19 sts), ch 1, turn.
Row 6: Sc in each st (19 sts), ch 1, turn.
Row 7: Inc, sc 17, inc (21 sts), ch 1, turn.
Rows 8-14: Sc in each st (21 sts), ch 1, turn.
Place a stitch marker in the first and last stitch of row 8.
Row 15: Dec, sc 17, dec (19 sts), ch 1, turn.
Row 16: Sc in each st (19 sts), ch 1, turn.
Row 17: Dec, sc 15, dec (17 sts), ch 1, turn.
Row 18: Dec, sc 13, dec (15 sts), ch 1, turn.
Row 19: Dec twice, sc 7, dec twice (11 sts), ch 1, turn.
Row 20: Dec twice, sc 3, dec twice (7 sts), ch 1, turn.
Row 21: Dec, sc 3, dec (5 sts).
Tie off. Weave ends to the back. Set aside.

Beard (make 1):

Rnd 1: In white, work 6 sc into a MR (6 sts)
Rnd 2: *Inc, sc 2, repeat from * once more (8 sts)
Rnd 3: Sc, inc, sc 3, inc, sc 2 (10 sts)
Rnd 4: Sc, inc in next 3 sts, sc 2, inc in next 3 sts, sc (16 sts)
Rnd 5: Sc 2, inc in next 3 sts, sc 5, inc in next 3 sts, sc 3 (22 sts)
Rnd 6: Sc 3, inc in next 3 sts, sc 9, inc in next 3 sts, sc 4 (28 sts)
Rnd 7: Sc 5, inc in next 3 sts, sc 11, inc in next 3 sts, sc 6 (34 sts)
Rnd 8: Sc in each st (34 sts)
Rnd 9: Sc 7, inc in next 3 sts, sc 14, inc in next 3 sts, sc 7 (40 sts)
Rnds 10-15: Sc in each st (40 sts)
Tie off. Stuff lightly. Flatten the top edge and insert hook into the first st through both layers. Continue to round 16.
Row 16: Sc 20 across to close, topping up stuffing as you go, ch 1, turn.

Sideburns:
Row 1: Sc 3, leave remaining sts unworked (3 sts), ch 1, turn.
Rows 2-5: Sc in each st (3 sts), ch 1, turn.
Row 6: Sc, dec (2 sts), ch 1, turn.
Row 7: Dec (1 st).
Tie off. With RS facing, insert hook into last st of beard (row 16) and repeat rows 1-7 of Sideburns

Moustache (make 2):
Rnd 1: In white, work 6 sc into a MR (6 sts)
Rnd 2: *Sc 2, inc, repeat from * once more (8 sts)
Rnd 3: *Sc 3, inc, repeat from * once more (10 sts)
Rnd 4: Sc in each st (10 sts)
Rnd 5: Dec, sc 8 (9 sts)
Rnd 6: Dec, sc 7 (8 sts)
Rnd 7: Dec, sc 6 (7 sts)
Rnd 8: Dec three times, sc 1 (4 sts)
Tie off. Using a tapestry needle, weave the end through each stitch and pull to close.

Hat (make 1):
Brim:
Row 1: In white, ch 10, starting in 3rd ch from hook, hdc in each ch (8 sts), ch 1, turn.
Row 2: Hdc in each st (8 sts), ch 1, turn.
Rows 3-30: Repeat row 2.

Tie off. Fold brim upwards so that long edges are touching. Insert hook through both edges and sc 30 to create a long folded brim. Slst the short ends together to create a circle. Tie off.

Hat Body:
Rnd 1: In red, insert hook into a st at the back of the brim, Hdc in each st, hdc 2 at the seam (32 sts)
Rnd 2: Hdc dec, Hdc 28, Hdc dec (30 sts)
Rnd 3: *Hdc 13, hdc dec, repeat from * once more (28 sts)
Rnd 4: *Hdc 5, hdc dec, repeat from * three more times (24 sts)
Rnd 5: *Hdc 6, hdc dec, repeat from * two more times (21 sts)
Rnd 6: *Hdc 5, hdc dec, repeat from * two more times (18 sts)
Rnd 7: *Hdc 4, hdc dec, repeat from * two more times (15 sts)
Rnd 8: *Hdc 3, hdc dec, repeat from * two more times (12 sts)
Rnd 9: *Hdc 1, hdc dec, repeat from * three more times (8 sts)
Rnd 10: *Hdc 2, hdc dec, repeat from * once more (6 sts)
Rnd 11: *Hdc 1, dec, repeat from * once more (4 sts)
Tie off. Weave ends.

Pompom:
Rnd 1: In white, work 6 sc into a MR (6 sts)
Rnd 2: Inc in each st (12 sts)
Rnds 3-5: Sc in each st (12 sts)
Rnd 6: Dec around (6 sts)
Tie off. Stuff. Weave yarn end through each st and pull to close. Stitch to tip of hat. Weave ends.
Move on to assembly below!

Assembly:
1- Insert 10mm safety eyes into the front panel between rows 13-14. The eyes should be approximately 6 sts in from each side, with approximately 5 sts between them.
2- Stack the panels as follows: back panel on bottom, front panel in the middle, beard on top. Make sure all the yarn ends of the panels are facing inward so that they are hidden. Match up all rows with the front/right side facing you. The bottom of the side burns/row 16 of the beard should line up with the stitch markers at row 8 (see photos below). Starting near the top of the head on the left side, begin attaching the panels together by inserting your hook through the two panels and single crocheting around the outside edge of the panels starting in MC. Once you’ve crocheted down to the top edge of the sideburn, switch to white yarn. Now you will be crocheting through all three panels (the sideburn, the front, and the back). Continue crocheting down the sideburn. Once you reach the main part of the beard, you will switch to MC and resume crocheting in the two panels only. Crochet down around the bottom and part way up the other side, switching back to white when you reach the sideburn on the other side; you will now be crocheting through three panels again! Crochet up the sideburn. Switch back to MC after the sideburn. Now you are back to crocheting in two panels only. Stop here and stuff. Continue crocheting up and around the head, stuffing as you go. Slst to beginning stitch to close and weave ends.
3- Stitch the moustache pieces onto the front at rows 8-11 (they will overlap onto the top of the beard slightly).
4- In pink yarn, stitch a nose around two stitches at row 11. The nose will be between the eyes and immediately above where the moustache pieces touch. Stitch several times to create a small bump.
5- In white yarn, stitch eyebrows diagonally over the eyes at rows 17-18 spanning about 2 stitches.
6- Place the hat jauntily on the head and stitch in place.
7- Add blush to cheeks if desired.

More Amigurumi Ornament Ideas: