MATERIALS AND TOOLS
1.  Plush yarn orange color (I used Himalaya Dolphin Baby 80330), little bit of brown yarn for the bottom of the pumpkin, two different green colored yarns for the leaves. Little bit of black and white cotton yarn for the face sculpting and to embroider the eyes, eyebrows and nose. You can use hook size and safety eyes that match to your yarn.
2. Hook size 3.5 mm
3. Scissors
4. Safety eyes size 18 mm
5. Needle
6. Fiber filling (stuffing)
7. Stitch marker

ABBREVIATIONS
MR-Magic ring
st/sts-stitch/stitches
ch-chain
sc-single crochet
Rnd/Rnds-round/rounds
inc-single crochet increase (2 sc in 1 st)
dec-invisible decrease (dec 2 sts together FLO)
BLO-back loop only
FLO-front loop only
dc-double crochet
(…)* -repeat instruction in bracket…times
(…)-total number of sts in the round/row
Sl st-slip stitch

IMPORTANT NOTES
✓ Toy size using these materials is around 10-11 cm (4 inches)
But keep in mind that you may get a toy size a little more or a little less.
It all depends on the yarn you use, hook size and your crochet tension.
✓ Use a stitch marker to mark the last stitch of every round.
✓ While stuffing do not forget to shape the body parts and never overstuff them.

Amigurumi Crochet Spooky Pumpkin For Halloween Free Pattern:

PUMPKIN
Start crocheting with green color. Stuff slightly as you go.
Rnd 1. 6 sc in MR
Rnd 2. 6 inc (12)
Rnd 3. 12 sc on BLO
Rnds 4-6. 12 sc (3 Rnds)
Change the color to orange.
Rnd 7. Work on FLO (1 sc, inc )* 6 (18)
Rnd 8. (2 sc, inc)* 6 (24)
Rnd 9. (3 sc, inc )* 6 (30)
Rnd 10. (4 sc, inc)* 6 (36)
Rnd 11. (5 sc, inc )* 6 (42)
Rnd 12. (6 sc, inc)* 6 (48)
Rnd 13-18. 48 sc (6 Rnds)
Insert the safety eyes between rnds 15 and 16, distance between 6 visible stitches.
Rnd 19. (6 sc, dec )* 6 (42)
Rnd 20. (5 sc, dec )* 6 (36)
Rnd 21. (4 sc, dec )* 6 (30)
Rnd 22. (3 sc, dec )* 6 (24)
Rnd 23. (2 sc, dec )* 6 (18)
Rnd 24. (1 sc, dec )* 6 (12)
Rnd 25. 6 dec (6)
Sew the hole closed.
Fasten off and weave in the ends.

LEAF (make one)
Working around the chain.
Rnd 1. Chain 10, starting in the second stitch: 6 sc, 2 inc, 3 sc in one stitch, 2 inc, 6 sc (23)
Rnd 2. 23 dc
Fold the leaf and make sl st to connect.
Fasten off and leaf a tail for sewing. Sew the leaf near the spiral leaves.

SPIRAL LEAVES (make two)
Attach the yarn with a sl st in Rnd 7 and Chain 26. In the second chain from the hook inc in each chain, sl st into the initial st of the body.
Fasten off and weave in the ends.

Shape the pumpkin (use a strong thread and long needle ): draw the needle through the bottom center and bring it to Rnd 7. Pull tight. Repeat this as many times you like. I did three times.

BOTTOM
Crochet with brown color.
Attach the yarn into Rnd 25 and make Chain 5.
Fasten off and burn the end.

TIGHTENING AND FACE SCULPTING
Follow the steps from the picture (see picture). Tighten each end of the thread well and then tighten both ends at once.
Embroider nose, eyelids and eyebrows (see picture)
Congratulations! Your Pumpkin is done, I hope you enjoyed it!
Don’t forget to tag me as the author of the pattern, when you post your plushie!

More Amigurumi Pumpkin Ideas:

Abbreviations
r-round
ch – chain
Sc-single crochet
3dc cl – 3 double crochet cluster stitch**
slst – slip stitch
inc – increase
dec – decrease
*… – repeat… times (…) total number of stitches in the round

Materials
Bulky (solid)  yarn
8mm hook
2 buttons
Fiber filling Thread
Needle
*ATTENTION – before using safety eyes, please, read instruction. It might be dangerous for children.
** 3dc cl stitch you can find a tutorial video on my page, HIGHLIGHT – TUTORIALS

Amigurumi Crochet Purple Bug for Halloween Free Pattern:

Body – black yarn, (white)
Make 8 ch, start in the second chain from the hook
R1: 6sc, 3sc into the last stitch, work on along the other side: 5sc, 1inc (16)
R2: (1inc, 2sc, 1inc, 2sc, 1inc,1sc)*2 (22)
R3: 1inc, 9sc, 1inc, 1sc, 1inc, 7sc, 1inc, 1sc (26)
R4:26sc (26)
R5: (1inc, 5sc, 1inc, 6sc)*2 (30)
R6-R7: 30sc (30)
From now on we are making heart, white colour means white yarn!!!
R8: 8sc, 1inc, 12sc, 2sc, 1sc, 2sc, 4sc (31)
R9 R10: 21sc, 7sc, 3sc (31)
R11: 5sc, 1inc, 16sc, 5sc, 4sc (32)
R12: 1dec, 15sc, 1dec, 5sc, 3sc, 5sc (30)
R13: 4sc, 1dec, 12sc, 1dec, 3sc, 1sc, 6sc (28)
R14: (7sc, 1dec)*3, 1sc (25)
R15: 3sc, 1dec, 7sc, 1dec, 7sc, 1dec, 2sc (22)
R16: (1dec, 4sc)*3, 1dec, 2sc (18)
R17: 9dec (9)
R18: 1sc, 4dec (5)
Cut the yarn and close remaining stitches. Finish off. Use a piece of white yarn to form the heart shape.

Mandibles (2pieces)
Use black colour
R1: 5sc in magic ring (5)
R2: 2sc, 1inc, 2sc (6)
R3: 1dec, 1sc, 2inc, 1sc (7)
R4: 1dec, 1sc, 1inc, 3dc cl, 1inc, 1sc (8)
R5: 1dec, 1sc, 3inc, 1dec (9)
R6: 2dec, 1inc, 1sc, 1inc, 1dec (8)
R7: 1dec, 2sc, 1inc, 1inc, 1dec (8)
Make slst, fasten off, cut the yarn, leave a tail for sewing on R1-R2, 3stitches apart (two angles of the head).

Legs (6pieces)
Use black colour
R1: 6sc in magic ring (6)
R2 R5: 6sc (6)
Fold two sides and make 3s, fasten off, cut the yarn, leave a tail for sewing on the sides.

Face
Eyes on R3-R4, approxx. 2-3 stitches apart.
And you are done!

More Amigurumi Halloween Bug Ideas:

Materials list
White yarn
Black yarn
Purple yarn
8 mm safety eyes
2 mm crochet hook
Stuffing
Tapestry needle

Abbreviations:
sc: single crochet
FLO: front loop
BLO: back loop
sl st: slip stitch

Amigurumi Fantasmin Crochet Halloween Ghost Free Pattern:

Body of the Little Ghost
(White)
R1: 6 sc in a magic ring. (6)
R2: (Inc) x 6. (12)
R3: (1 sc, Inc) x 6. (18)
R4: (2 sc, Inc) x 6. (24)
R5: (3 sc, Inc) x 6. (30)
R6-R14: 30 sc. (30)
R15: 30 sc FLO. (30)
R16: (9 sc, Inc) x 3. (33)
R17-R19: 33 sc. (33)

Fasten off and weave in ends.
Place the eyes on round #9 with a 6-stitch separation.

Closing instructions:
Stuffing the body: Before continuing with the next rounds, stuff the little ghost’s body with your preferred stuffing material.
R1: Join in the back loop of round 15 (the one inside the body) and crochet 30 sc. (30) BLO
R2: (3 sc, dec) x 6. (24)
R3: (2 sc, dec) x 6. (18)
Finish: Fasten off, leaving a long tail to close the body. Use a tapestry needle to close the remaining stitches and secure the finish.

Arms
(White)
R1: 6 sc in a magic ring. (6)
R2-R5: 6 sc. (6)
Fasten off, Leave a yarn tail to sew between rounds 11 and 13.

Hat
(Black and Purple)
R1: 6 sc in a magic ring. (6)
R2: 6 sc. (6)
R3: (1 sc, Inc) x 3. (9)
R4: 9 sc. (9)
R5: (2 sc, Inc) x 3. (12)
R6: 12 sc. (12)
R7: (3 sc, Inc) x 3. (15)
R8: 15 sc. (15)
R9: (4 sc, Inc) x 3. (18)
R10: 18 sc. (18)
R11: (5 sc, Inc) x 3. (21)
Switch to purple:
R12: 21 sc. (21)
R13: FLO (Inc) x 21. (42)
Finish: Fasten off, leaving a long tail for sewing.
Sew all the pieces together.

Additional details:
Hanging loop: Before attaching the hat, you can add a loop at the tip to hang it. This is optional and will add a decorative touch.

Decoration: Embroider the mouth, cheeks, or decorate it however you like.
Add your personal touch!

More Amigurumi Halloween Ghost Ideas:

Material List:
Alize Cotton gold in the colors orange, Black and white.
1.8 or 2 mm crochet hook Tapestry needle
Embroidery floss for the “X” scarred eye
8 mm black safety eye, you only need one.
Stuffing
Scissors

Abbreviations:
MR – Magic ring
st – stitch
inc – increase
dec – decrease
ch – chain
sc – single crochet
sl st– slip stitch
BLO – back loops only
HDC – half double crochet
DC – double crochet
TR – treble crochet

Amigurumi Crochet the Jester for Halloween Doll Free Pattern:

Head
01. 6 sc in MR (6)
02. 6 inc (12)
03. (1sc, inc)x6 (18)
04. (2sc, inc)x6 (24)
05. (3sc, inc)x6 (30)
06. (4sc, inc)x6 (36)
07. (5sc, inc)x6 (42)
08. (6sc, inc)x6 (48)
09-17. sc all around (48) (8 rounds)
Insert safety eyes between rounds 14 and 15.
18. (6sc, dec)x6 (42)
19. (5sc, dec)x6 (36)
20. (4sc, dec)x6 (30)
21. (3sc, dec)x6 (24)
22. (2sc, dec)x6 (18)
Stuff.

Horns (make 2)
01. 6 sc in MR (6)
02. (1sc, inc)x3 (9)
03. (2sc, inc)x3 (12)
04. (3sc, inc)x3 (15)
05. (4sc, inc)x3 (18)
06. (5sc, inc)x3 (21)
07. Join with the 12th sc and continue working 12 sc (12)
08. sc all around (12)
09. (2sc, dec)x3 (9)
10. sc all around (9)
11. (1sc, dec)x3 (6)
12. sc all around (6)
13. 3 dec (3)
Now it’s time to crochet in the stitches we left unworked in round 6.
01. (2sc, inc)x3 (12)
02. sc all around (12)
03. (3sc, inc)x3 (15)
04. sc all around (15)
05. (4sc, inc)x3 (18)
06. In BLO sc all around (18)
07. (2sc, inc)x6 (24)
08. In BLO sc all around (24)
09. (3sc, inc)x6 (30)
10. In BLO sc all around (30)
11. sc all around (30)

Horns
Go back to the front loops we left unworked in rounds 6, 8, and 10 of the part 2 of the hrons. Work slip stitches in each of the rounds. Hold your horn right side up as you do so.

Hat
01. 6 sc in MR (6)
02. 6 inc (12)
03. (1sc, inc)x6 (18)
04. (2sc, inc)x6 (24)
05. (3sc, inc)x6 (30)
06. (4sc, inc)x6 (36)
07. (5sc, inc)x6 (42)
08. (6sc, inc)x6 (48)
09-13. sc all around (48) (5 rounds)
14. 20sc, 2HDC, 3DC, 2HDC, 21 SC (48)
15. 19sc, 3HDC, DC, TR, DC, 3 HDC, 20 sc (48)

Ruffles
Start with a chain 19. Start in the 2nd crochet from hook.
01. 18 inc, ch1, turn (36)
02. (1sc, inc)x18, ch1, turn (54)
03. (2sc, inc)x18, ch1, turn (72)
04. (3sc, inc)x18, ch1, turn (90)

Assembly
Assemble arms to body in round 11.
Assemble both horns to the hat symetrycally, and the hat to the head.
Assemble the head to the body. Sew the neck ruffles around the neck.
Embroider an “X” on the face in the place of the eye.
Embrioder a little tear and a frown (optional).
Conratulations! you have made yourself a sweet little creature.

More Amigurumi Jester Doll Ideas:

Materials
Red chenille yarn size 6
Purple Chenille size 5 (I used Sweet snuggles skinny) 5.5 mm hook
4mm hook
tapestry needle
stitch marker
polyfil
25 mm safety eyes
10 mm safety nose or safety eye (I used an eye as my nose)

Abbreviations
sc– single crochet
ch– chain
mr– magic ring
rds– rounds
R#– round number
inc– increase
dec– decrease
Fo– fasten off
hdc– half double crochet
dc– double crochet
MC-Main color
CC– Contrast color
tw-turn work

Amigurumi Crochet Red Devil for Halloween Free Pattern:

Head
Using 5.5mm hook and MC
R1: ch 7, sc in 2nd ch from hook and sc in the next 5 sts, sc 6 on the opposite side (12)
R2: (sc 1, inc)x6 (18)
R3: (inc, sc 2)x6 (24)
R4: (sc 3, inc)x6 (30)
R5: (inc, sc 4)x6 (36)
R6-12: sc around (36) {7 rds}
R13: (dec, sc 4)x6 (30)
R14: (sc 3, dec)x6 (24)
*start stuffing and add safety eyes between rds 11 and 12 7 sts apart, add safety nose between safety eyes! You can also put the nose one round down, whichever you prefer!! You can also embroider the nose!!
R15: (dec, sc 2)x6 (18)
f.o. and leave a short tail, stuff the rest of the way!

Ears x2
Using 5.5 mm hook and MC
R1: 6 sc in Mr
R2: inc (12)
R3-5: sc around (12) {3 rds}
Fo and leave a long tail for sewing!! *don’t stuff*

Tail
Using 5.5 mm hook and MC
R1: 6 sc in Mr
R2-18: sc around (6) {17 Rds} Fo and leave a long tail for sewing!! *don’t stuff*

Wings x 2
Optional!!
Using 5.5 mm hook and second CC color (I used white)
R1: ch 13 and sc in the second ch from hook then sc in the last 11 sts ch 1 and tw (12)
R2: sc 9, sc 2 and tw (9)
R3: sc in the second ch from hook then sc in the last 9 sts, ch 1 and tw (10)
R4: sc 7, ch 2 and tw (7)
R4: sc in the second ch from hook then sc in the remaining 7 sts, ch 1 and tw (8)
R5: sc 5, ch 2 tw (5)
R6: sc in the second ch from hook then sc in the remaining 5 sts, ch 1 and tw (6)
Do not fasten off instead ch 1 and rotate your work and make 3 dec across the side of your wing
Fo and leave a long tail for sewing!!

Horns x2
Using 4mm hook and weight 4  yarn
R1: sc 4 in Mr
R2: (sc, inc)x2 (6)
R3: (sc 2, inc)x2 (8)
R4: sc around (8)
R5: (sc 3, inc)x2 (10)
R6: (sc 4, inc)x2 (12)
R7: sc around (12) Fo and leave a long tail for sewing!! “don’t stuff*

Point of tail
Using a 5.5 mm hook and MC
R1: 4 sc in Mr
R2: (sc, inc)x2 (6)
R3: (sc 2, inc)x2 (8)
R4: (sc 3, inc)x2 (10)
R5: (sc 4, inc)x2 (12) fold and sc 4/5 sts across Fo and leave a long tail for sewing!! *don’t stuff*
Sew point of tail to Mr of tail

Assembly
sew the arms onto either side of the body on row 19!
sew the head to the body!
sew the ears between rds 2-6 on head! Sew horns on rds 1-2
sew the tail onto rows 8-9
sew point to end of tail (optional) sew wings on rds 15-18
And you’re done I hope you love your new friend!! tag me in any makes:)!

More Amigurumi Halloween Devil Ideas:

Abbreviations
MR magic ring
ch chain
st stitch
sc single crochet
hdc half double crochet
dc double crochet
dec decrease
inc increase

Amigurumi Fear me Ghost with Pumpkin Hat Free Pattern:

Leaf : 1 piece : Green
Crochet on chain foundation
1 Leave yarn for sewing.
9ch, crochet in the 2nd chain from the hook, 8inc. 16
Fasten off, Leave yarn for sewing.

Pumpkin : 1 Piece : Orange
work in spiral round.
1 MR, 8sc. 8
2 8inc. 16
3-6 16sc. (4 rnds) 16
7 8dec. 8
Fasten off, sew all loops together.
Sew to decorate as shown in picture 2-5.

Sew and pull the top and bottom together.
Then divide the work into 4 parts, 4 stitches each. And sew to decoration.

Ghost : 1 Piece : white
Code : work in spiral round.
1 MR, 8sc. 8
2 8inc. 16
3 [sc, inc]*8 times. 24
4 [2sc, inc]*8 times. 32
5 32sc. 32
6 [3sc, inc]*8 times. 40
7 40sc. 40
8 17sc, Mark eye, 6sc, Mark eye, 17sc. (Pic 7.) 40
9 40sc. 40
10 [9sc, inc]*4 times. 44
11 16sc, bobble 4dc, 10sc, bobble 4dc, 16sc. 44
12-13 44sc. (2 rnds) 44

Use scrap yarn to be used as a point to attach the eye

Pause work, Attach eye to the marked points.
And decorate with the pumpkin on top. (Pic 8.)

14 5sc, inc, [10sc, inc]*3 times, 5sc. 48
15 48sc. 48
16 [2 sc, 2 tr]*12 times. (Pic 9.) 48
17 [4sc, dec]*8 times. 40
18 [3sc, dec]*8 times. 32
19 [2sc, dec]*8 times. 24
Fill with fiberfill
20 [sc, dec]*8 times. 16
21 8dec. 8
Fasten off, sew all loops together.
Hide yarn end.

More Amigurumi Halloween Ghost Ideas:

Materials
•Hook: 5mm
• Light blue chenille size 4 medium
• Red chenille size 4 medium
• Green chenille size 4 medium
• Pink chenille size 4 medium
• Yellow chenille size 4 medium
• Black chenille size 4 medium
• White chenille size 4 medium
• Black cotton/acrylic yarn
• White cotton/acrylic yarn
• Safety eyes (12mm)
• Red felt
• Stuffing
• Tapestry needle
• Stitch markers
• Scissors
• Fabric glue

Abbreviations
• R: round
• st: stitch
• mr: magic ring
• ch: chain
• sc: single crochet
• sl st: slip stitch
• inc: increase
• dec: decrease
• BLO: back loop
• FLO: front loop
• FO: fasten off
• cc: change color

Amigurumi Sally Crochet Doll for Halloween Free Pattern:

Head
Use light blue yarn
R1: 8sc in a mr (8)
R2: 8inc (16)
R3: (sc, inc)x8 (24)
R4: (3sc, inc)x6 (30)
R5: (2sc, inc, 2sc)x6 (36)
R6-10: 36sc (36) – 5 rounds
R11: (4sc, dec)x6 (30)
R12: (3sc, dec)x6 (24)
R13: (4sc, dec)x4 (20)
Cut yarn, leaving a long tail for Sewing.
Add safety eyes between R9-10, 5 visible sts apart and add stuffing making sure to get a rounded shape

Body
Start with black yarn
R1: 5sc in a mr (5)
R2: 5inc (10)
R3: BLO 10sc (10)
R4: cc color to white 10sc (10)
R5: cc to light blue BLO 10sc (10)
Cut yarn and FO with an invisibile join. with white yarn insert the hook in the first FLO sts of R5 and sl st all the way around, FO with an invisible join. Make another leg but this time don’t cut yarn, with white yarn sl st all the way anround on R5 and FO with invisible join.
Go back to the light blue yarn and ch2 (pic 1).
R6: Insert the hook in any of the first leg st (pic 2) and make 10sc, 2sc in the 2ch, 10sc, 2sc in the 2ch (24)
R7: BLO all the way cc to green 5sc, cc to black, inc, 3sc, cc to pink inc, 3sc, cc to green 3sc, inc, cc to yellow, 3sc, inc, 3sc (28)
R8: cc to green 5sc, cc to black 5sc, cc to pink 5sc, cc to green 5sc, cc to yellow 8sc (28)
Start stuffing as you go, when you stuff the feet remember to keep them flat.
R9: cc to green 5sc, cc to black 6sc, cc to pink 4sc, cc to green 3sc, cc to yellow 10sc (28)
R10: cc to green 5sc, cc to black 6sc, cc to pink 4sc, cc to green 3sc, cc to yellow 8sc, cc to green 2sc (28)
R11: cc to black 2sc, cc to yellow 5sc, cc to pink 8sc, cc to yellow 7sc, cc to green 6sc (28)
R12: cc to black 2sc, cc to yellow sc, dec, 2sc, cc to pink sc, dec, 3sc, cc to light blue dec, sc, cc to yellow 2sc, dec, 2sc, cc to pink sc, dec, 2sc, cc to black sc (23)
R13: with black 2sc, cc to yellow 3sc, cc to pink dec, 3sc, cc to light blue sc, dec, sc, cc to yellow 3sc, dec, cc to pink 3sc, cc to black sc (20)
Finish stuffing.
Cut  yarn leaving a long tail for sewing (pic 3).

Arms (x2)
make a green sleeve and a yellow one
Start using light blue yarn
R1: 4sc in a mr (4)
R2: 4inc (8)
R3-4: 8sc (8) – 2 rounds
R5: cc to yellow/ green 8sc (8)
R6: fold the arm and close it making 4sc (4)
Cut yarn leaving a long tail (pic 4)

Dress edges
Start using green yarn, insert the hook in the first green st of R7, not FLO sts (pic 6)

R1: ch 4 (the first ch doesn’t count as a st) in the 2nd ch from the hook make sl st, sc, sc in the next st of the body, (3ch, sl st, sc, sc in the body)x3 (3ch, sl st, sc, cc to black sc in the body. Continue this way following the body’s color sts.
Wev in the ends.

Hair;
Use red yarn
R1: 6sc in a mr (6)
R2: 6inc (12)
R3: (sc, inc)x6 (18)
R4: (ch20, starting from the 2nd ch from the hook make 19sc, sc in the next base st)x18 (18)

Sewing
• Sew the head to the body, add fiber fill while sewing if needed and make sure the face lines up with the neck
• Sew the arms to the body at R12-13 (pay attention to the arm’s colo: green arm with yellow and yellow arm with pink)

Body details
• To make the lips cut the felt like in pic 6 and glue it on the head between R11-12
• sew the mounth and the scar on the forehead and on the arm

• sew the eyes’ details (pic 8)
• sew the dress details with acrylic/ cotton yarn

Sewing hair
• Start by sewing each lock to each other going through the front loop of the first lock and the back loop of the second lock all the way down leaving just 3sts left. Go all the way around leaving 4 Locks

• attach the hair to the body by sewing starting from the side and going around the head (pic 11)

• sew the front locks, 2 for each side like in pics

More Amigurumi Halloween Doll Ideas:

Get this free crochet pattern to make this amazing bat keychain amigurumi for Halloween. The crochet bat is easy and quick to make, the head and body are crocheted as a single piece, the wings are made from felt. The finished crochet bat measures approximately 6 cm (2,4″) tall. Size may vary depending on tension and materials used.

Materials:
– Yarn: YarnArt Jeans (55% cotton, 45% acrylic, 50 g/160 m) in 2 colors
– Hook size: 2.0-2.5 mm
– 4 mm safety eyes
– Felt for wings
– Yarn for embroidering the face
– Sewing thread or fabric glue for attaching wings
– Tapestry needle and scissors
– Fiberfill

Abbreviations:
R = row
mc = magic circle
ch = chain
sl st = slip stitch
sc = single crochet
dc = double crochet
hdc = half double crochet
inc = 2 sc in the next stitch
dec = single crochet 2 stitches together
F. o. = finish off
(12) = number of stitches you should have at the end of the round/row
(…) *6 = repeat whatever is between the brackets the number of times stated

Amigurumi Crochet Halloween Bat Free Pattern:

Head and Body (one piece)
Start crocheting from the body in main color yarn:
R 1: 6 sc in mc (6)
R 2: (inc) *6 (12)
R 3: (3 sc, inc) *3 (15)
R 4-5: 15 sc (2 rows)
R 6: (3 sc, dec) *3 (12)
R 7: 12 sc
R 8: (inc) *12 (24)
R 9: (3 sc, inc) *6 (30)
R 10: (4 sc, inc) *6 (36)
R 11-15: 36 sc (5 rows)
Insert safety eyes between R 12 and R 13 at the distance of 9 sc from each other.
R 16: (4 sc, dec) *6 (30)
R 17: (3 sc, dec) *6 (24)
R 18: (2 sc, dec) *6 (18)
R 19: (1 sc, dec) *6 (12)
Stuff with fiberfill.
R 20: (dec) *6 (6)
F. o.

Ears
With additional color yarn (make 2):
Make 3 ch.
R 1: From the 3rd ch from hook: 1 hdc, 1 ch, 1 dc, 1 ch, 1 hdc, 1 ch, 1 sc, 1 sl st.
F. o.

With main color yarn (make 2):
Make 3 ch.
R 1: From the 3rd ch from hook: 1 hdc, 1 ch, 1 dc, 1 ch, 1 hdc, 1 ch, 1 sc, 1 ch.
Do not cut the yarn.

Put out the part with main color and the part with additional color together with inner part (wrong side to wrong side) and make sc through both parts around the ear.
F. o. and leave a long tail for sewing.

Assembly
Sew on the ears starting approximately from R 4 of the head.
Embroider a mouth and eyebrows with a black/pink yarn.
Cut out wings from felt and sew/glue them onto the back.

More Amigurumi Halloween Bat Ideas:

You will need:
– YarnArt Jeans  yarn (55% cotton, 45% acrylic, 50 g/160 m)
– 1.5 mm  crochet hook
– 6 mm and 10 mm safety eyes
– Black and pink threads
– Sewing needle
– Scissors
– Fiberfill
Height: 7 cm (2.7″)

Abbreviations:
MR – magic ring
sc – single crochet
dc – double crochet
tr – treble crochet
inc – increase (2 sc in one stitch)
dec – decrease (2 sc together)
(…) – number of stitches you should have at the end of the row
(…)*6 – repeat whatever is between the brackets the given number of times

Amigurumi Crochet Ghost Free Pattern:

More Amigurumi Halloween Ghost Ideas:

You will need:
– YarnArt Jeans  yarn
– Black embroidering floss
– 2.00 mm  crochet hook
– Fiberfill
– 8.00 mm black half beads or safety eyes
– Yarn needle, scissors and pliers
– Wire for the tail-body-head and arms
– Insulating tape

Abbreviations:
R – row
ch – chain
sl st – slip stitch
sc – single crochet
inc – increase (2 sc in one stitch)
dec – decrease (2 sc together)
[…] – number of stitches you should have at the end of the row
(…) – repeat whatever is between the brackets the given number of times

Amigurumi Halloween Ghost Free Pattern:

Arms (make 2)
R 1: 6 sc in magic ring [6]
R 2: (inc) repeat 6 times [12]
R 3: (3 sc, inc) repeat 3 times [15]
R 4-6: 15 sc (3 rows)
R 7: (1 sc, dec) repeat 5 times [10]
R 8-22: 10 sc (15 rows)
Fasten off.

Tail – Body
R 1: 6 sc in magic ring [6]
R 2-5: 6 sc (4 rows)
R 6: (1 sc, inc) repeat 3 times [9]
R 7-8: 9 sc (2 rows)
R 9: (2 sc, inc) repeat 3 times [12]
R 10-12: 12 sc (3 rows)
R 13: (3 sc, inc) repeat 3 times [15]
R 14-15: 25 sc (2 rows)
R 16: (4 sc, inc) repeat 3 times [18]
R 17-19: 18 sc (3 rows)
Insert the wire in the tail and make a small loop at the end, fixing it with an insulating tape.
Length of wire must be enought for tail-body-head (approx. 25 cm).
Stuff with fiberfill.
R 20: (2 sc, inc) repeat 6 times [24]
R 21: 24 sc
R 22: (3 sc, inc) repeat 6 times [30]
R 23: 30 sc
R 24: (4 sc, inc) repeat 6 times [36]
R 25: 36 sc
R 26: (5 sc, inc) repeat 6 times [42]
R 27: 42 sc
R 28: (6 sc, inc) repeat 6 times [48]
R 29-32: 48 sc (4 rows)
R 33: (6 sc, dec) repeat 6 times [42]
R 34: 42 sc
R 35: (5 sc, dec) repeat 6 times [36]
R 36: 36 sc
R 37: (4 sc, dec) repeat 6 times [30]
R 38: 30 sc
R 39: (3 sc, dec) repeat 6 times [24]
R 40: 24 sc, joining arms: 7 sc on the body, 5 sc together with sc of the 1st arm, 7 sc on the body, 5 sc together with sc of the 2nd arm
Stuff.
Make one wire frame for arms and insert it. Make a small loops at the ends of wire, fixing them with an insulating tape.
You can don’t use a wire frame for arms. iit will be much easier to continue crocheting.
R 41: 24 sc: 7 sc on the body, 5 sc on the 1st arm, 7 sc on the body, 5 sc on the 2nd arm
R 42: (2 sc, dec) repeat 6 times [18]
R 43: 18 sc, sl st
Finish stuffing.
Fasten off and leave a long tail for sewing.

Head
R 1: 6 sc in magic ring [6]
R 2-4: 6 sc (3 rows)
R 5: (1 sc, inc) repeat 3 times [9]
R 6: 9 sc
R 7: (2 sc, inc) repeat 3 times [12]
R 8: 12 sc
R 9: (3 sc, inc) repeat 3 times [15]
R 10-11: 15 sc (2 rows)
R 12: (4 sc, inc) repeat 3 times [18]
R 13-14: 18 sc (2 rows)
R 15: (2 sc, inc) repeat 6 times [24]
R 16: (3 sc, inc) repeat 6 times [30]
R 17-22: 30 sc (6 rows)
R 23: (4 sc, inc) repeat 6 times [36]
R 24: (5 sc, inc) repeat 6 times [42]
R 25: (6 sc, inc) repeat 6 times [48]
R 26-28: 48 sc (3 rows)
Insert safety eyes between R 21 and R 22 at the distance of 3 or 5 sc from each other.
R 29: (6 sc, dec) repeat 6 times [42]
R 30: (5 sc, dec) repeat 6 times [36]
R 31: (4 sc, dec) repeat 6 times [30]
R 32: (3 sc, dec) repeat 6 times [24]
R 33: (2 sc, dec) repeat 6 times [18]
Stuff.
R 34: (1 sc, dec) repeat 6 times [12]
R 35: (dec) repeat 6 times [6]
Fasten off.

Embroider a nose with a white  yarn.
Embroider a mouth and lashes with a black yarn.

More Amigurumi Halloween Ghost Ideas: